Commit 70232b5253 ("aio-posix: Don't count ctx->notifier as progress when
2018-08-15), by not reporting progress, causes aio_poll to execute the
system call when polling succeeds because of ctx->notifier. This introduces
latency before the call to aio_bh_poll() and negates the advantages of
polling, unfortunately.
The fix builds on the previous patch, separating the effect of polling on
the timeout from the progress reported to aio_poll(). ctx->notifier
does zero the timeout, causing the caller to skip the system call,
but it does not report progress, so that the bug fix of commit 70232b5253
still stands.
Fixes: 70232b5253
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180912171040.1732-4-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is a preparation for the next patch, and also a very small
optimization. Compute the timeout only once, before invoking
try_poll_mode, and adjust it in run_poll_handlers. The adjustment
is the polling time when polling fails, or zero (non-blocking) if
polling succeeds.
Fixes: 70232b5253
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180912171040.1732-3-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
It is valid for an aio_set_fd_handler to happen concurrently with
aio_poll. In that case, poll_disable_cnt can change under the heels
of aio_poll, and the assertion on poll_disable_cnt can fail in
run_poll_handlers.
Therefore, this patch simply checks the counter on every polling
iteration. There are no particular needs for ordering, since the
polling loop is terminated anyway by aio_notify at the end of
aio_set_fd_handler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180912171040.1732-2-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The counter is for qemu_lockcnt_inc/dec sections (read side),
qemu_lockcnt_lock/unlock is for the write side.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180803063917.30292-1-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
An aio_notify() pairs with an aio_notify_accept(). The former should
happen in the main thread or a vCPU thread, and the latter should be
done in the IOThread.
There is one rare case that the main thread or vCPU thread may "steal"
the aio_notify() event just raised by itself, in bdrv_set_aio_context()
[1]. The sequence is like this:
main thread IO Thread
===============================================================
bdrv_drained_begin()
aio_disable_external(ctx)
aio_poll(ctx, true)
ctx->notify_me += 2
...
bdrv_drained_end()
...
aio_notify()
...
bdrv_set_aio_context()
aio_poll(ctx, false)
[1] aio_notify_accept(ctx)
ppoll() /* Hang! */
[1] is problematic. It will clear the ctx->notifier event so that
the blocked ppoll() will not return.
(For the curious, this bug was noticed when booting a number of VMs
simultaneously in RHV. One or two of the VMs will hit this race
condition, making the VIRTIO device unresponsive to I/O commands. When
it hangs, Seabios is busy waiting for a read request to complete (read
MBR), right after initializing the virtio-blk-pci device, using 100%
guest CPU. See also https://bugzilla.redhat.com/show_bug.cgi?id=1562750
for the original bug analysis.)
aio_notify() only injects an event when ctx->notify_me is set,
correspondingly aio_notify_accept() is only useful when ctx->notify_me
_was_ set. Move the call to it into the "blocking" branch. This will
effectively skip [1] and fix the hang.
Furthermore, blocking aio_poll is only allowed on home thread
(in_aio_context_home_thread), because otherwise two blocking
aio_poll()'s can steal each other's ctx->notifier event and cause
hanging just like described above.
Cc: qemu-stable@nongnu.org
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180809132259.18402-3-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The same logic exists in fd polling. This change is especially important
to avoid busy loop once we limit aio_notify_accept() to blocking
aio_poll().
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180809132259.18402-2-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
When we call addIOThread, the epollfd created in aio_context_setup,
but not close it in the process of delIOThread, so the epollfd will leak.
Reorder the code in aio_epoll_disable and reuse it.
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1526517763-11108-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
[Mention change to aio_epoll_disable in commit message. - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
Applied using the Coccinelle semantic patch scripts/coccinelle/use_osdep.cocci
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This hunk should not have been merged but I forgot to remove it. Let's
remove it before it slips into a QEMU release.
¯\_(ツ)_/¯
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20171103154041.12617-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After iothread is enabled internally inside QEMU with GMainContext, we
may encounter this warning when destroying the iothread:
(qemu-system-x86_64:19925): GLib-CRITICAL **: g_source_remove_poll:
assertion '!SOURCE_DESTROYED (source)' failed
The problem is that g_source_remove_poll() does not allow to remove one
source from array if the source is detached from its owner
context. (peterx: which IMHO does not make much sense)
Fix it on QEMU side by avoid calling g_source_remove_poll() if we know
the object is during destruction, and we won't leak anything after all
since the array will be gone soon cleanly even with that fd.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-id: 20170928025958.1420-6-peterx@redhat.com
[peterx: write the commit message]
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pull the increment/decrement pair out of aio_bh_poll and into the
callers.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-18-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch prepares for the removal of unnecessary lockcnt inc/dec pairs.
Extract the dispatching loop for file descriptor handlers into a new
function aio_dispatch_handlers, and then inline aio_dispatch into
aio_poll.
aio_dispatch can now become void.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-17-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This covers both file descriptor callbacks and polling callbacks,
since they execute related code.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-14-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-13-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The AioContext data structures are now protected by list_lock and/or
they are walked with FOREACH_RCU primitives. There is no need anymore
to acquire the AioContext for the entire duration of aio_dispatch.
Instead, just acquire it before and after invoking the callbacks.
The next step is then to push it further down.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-12-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
AioContext is fairly self contained, the only dependency is QEMUTimer but
that in turn doesn't need anything else. So move them out of block-obj-y
to avoid introducing a dependency from io/ to block-obj-y.
main-loop and its dependency iohandler also need to be moved, because
later in this series io/ will call iohandler_get_aio_context.
[Changed copyright "the QEMU team" to "other QEMU contributors" as
suggested by Daniel Berrange and agreed by Paolo.
--Stefan]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213135235.12274-2-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
