QEMU requires Clang or GCC, that define and support __GNUC__ extensions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201210134752.780923-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_finish_machine_init currently can only exit QEMU if it fails.
Prepare for giving it proper error propagation, and possibly for
adding a plugin_add monitor command that calls an accelerator
method.
While at it, make all errors from plugin_load look the same.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This check can be done in a much shorter way in meson.build. And while
we're at it, rename the #define to HAVE_BTRFS_H to match the other
HAVE_someheader_H symbols that we already have.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-7-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This check can be done in a much shorter way in meson.build. And while
we're at it, rename the #define to HAVE_SYS_KCOV_H to match the other
HAVE_someheader_H symbols that we already have.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-6-thuth@redhat.com>
[lv: s/signal/kcov/]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Linux kernel doesn't use the official bkpt insn for breakpoints;
instead it uses three instructions in the guaranteed-to-UNDEF space,
and generates SIGTRAP for these rather than the SIGILL that most
UNDEF insns generate:
https://elixir.bootlin.com/linux/v5.9.8/source/arch/arm/kernel/ptrace.c#L197
Make QEMU treat these insns specially too. The main benefit of this
is that if you're running a debugger on a guest program that runs
into a GCC __builtin_trap() or LLVM "trap because execution should
never reach here" then you'll get the expected signal rather than a
SIGILL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201117155634.6924-1-peter.maydell@linaro.org
With iproute2-5.8.0, the route, link and addr show commands fail:
root@sid:~# ip addr show
RTNETLINK answers: Unknown error 352321537
Dump terminated
root@sid:~# ip link show
RTNETLINK answers: Unknown error 352321537
Dump terminated
root@sid:~# ip route show
RTNETLINK answers: Unknown error 352321537
Dump terminated
This patch correctly decodes the GETROUTE and GETLINK commands and adds
the RTA_TABLE message.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201116163622.791442-1-laurent@vivier.eu>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122455.19417-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is not needed, all the callers are just saving what was
retrieved from -trace and trace_init_file can retrieve it
on its own.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20201102115841.4017692-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
From 894bb5172705e46a3a04c93b4962c0f0cafee814 Mon Sep 17 00:00:00 2001
From: Giuseppe Musacchio <thatlemon@gmail.com>
Date: Fri, 17 Apr 2020 17:25:07 +0200
Subject: [PATCH] linux-user: Prevent crash in epoll_ctl
The `event` parameter is ignored by the kernel if `op` is EPOLL_CTL_DEL,
do the same and avoid returning EFAULT if garbage is passed instead of a
valid pointer.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <a244fa67-dace-abdb-995a-3198bd80fee8@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some platforms used the wrong definition of stack_t where the flags and
size fields were swapped or where the flags field had type ulong instead
of int.
Due to the presence of padding space in the structure and the prevalence
of little-endian machines this problem went unnoticed for a long time.
The type definitions have been cross-checked with the ones defined in
the Linux kernel v5.9, plus some older versions for a few architecture
that have been removed and Xilinx's kernel fork for NiosII [1].
The bsd-user headers remain unchanged as I don't know if they are wrong
or not.
[1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The function do_sigreturn() tries to store the PC, NPC and PSR in
uint32_t local variables, which implicitly drops the high half of
these fields for 64-bit guests.
The usual effect was that a guest which used signals would crash on
return from a signal unless it was lucky enough to take it while the
PC was in the low 4GB of the address space. In particular, Debian
/bin/dash and /bin/bash would segfault after executing external
commands.
Use abi_ulong, which is the type these fields all have in the
__siginfo_t struct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201105212314.9628-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Because QEMU's user-mode emulation just directly accesses guest CPU
state, for SPARC the guest register window state is not the same in
the sparc64_get_context() and sparc64_set_context() functions as it
is for the real kernel's versions of those functions. Specifically,
for the kernel it has saved the user space state such that the O*
registers go into a pt_regs struct as UREG_I*, and the I* registers
have been spilled onto the userspace stack. For QEMU, we haven't
done that, so the guest's O* registers are still in WREG_O* and the
I* registers in WREG_I*.
The code was already accessing the O* registers correctly for QEMU,
but had copied the kernel code for accessing the I* registers off the
userspace stack. Replace this with direct accesses to fp and i7 in
the CPU state, and add a comment explaining why we differ from the
kernel code here.
This fix is sufficient to get bash to a shell prompt.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201105212314.9628-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The various structs that make up the SPARC target_ucontext had some
errors:
* target structures must not include fields which are host pointers,
which might be the wrong size. These should be abi_ulong instead
* because we don't have the 'long double' part of the mcfpu_fregs
union in our version of the target_mc_fpu struct, we need to
manually force it to be 16-aligned
In particular, the lack of 16-alignment caused sparc64_get_context()
and sparc64_set_context() to read and write all the registers at the
wrong offset, which triggered a guest glibc stack check in
siglongjmp:
*** longjmp causes uninitialized stack frame ***: terminated
when trying to run bash.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201105212314.9628-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Coverity points out that we don't check the return value from
copy_from_user() in vma_dump_size(). This is to some extent
a "can't happen" error since we've already checked the page
with an access_ok() call earlier, but it's simple enough to
handle the error anyway.
Fixes: Coverity CID 1432362
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201103141532.19912-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Coverity pointed out (CID 1432339) that target_to_host_timespec64() can
fail with -TARGET_EFAULT but we never check the return value. This patch
checks the return value and handles the error.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <cad74fae734d2562746b94acd9c34b00081c89bf.1604432881.git.alistair.francis@wdc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In pgd_find_hole_fallback(), Coverity doesn't like the use
of "if (MAP_FIXED_NOREPLACE || ...)" because it's using a
logical operator on a constant other than 0 or 1 and its
heuristic thinks we might have intended a bitwise operator
instead.
The logic is correct (we are checking whether the host really
has a MAP_FIXED_NOREPLACE or whether we fell back to the
"#define as 0 to ignore" from osdep.h); make Coverity
happier by explicitly writing out the comparison with zero.
Fixes: Coverity CID 1431059
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201103142636.21125-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning:
linux-user/mips/cpu_loop.c: In function ‘cpu_loop’:
linux-user/mips/cpu_loop.c:104:24: warning: this statement may fall through [-Wimplicit-fallthrough=]
104 | if ((ret = get_user_ual(arg8, sp_reg + 28)) != 0) {
| ^
linux-user/mips/cpu_loop.c:107:17: note: here
107 | case 7:
| ^~~~
linux-user/mips/cpu_loop.c:108:24: warning: this statement may fall through [-Wimplicit-fallthrough=]
108 | if ((ret = get_user_ual(arg7, sp_reg + 24)) != 0) {
| ^
linux-user/mips/cpu_loop.c:111:17: note: here
111 | case 6:
| ^~~~
linux-user/mips/cpu_loop.c:112:24: warning: this statement may fall through [-Wimplicit-fallthrough=]
112 | if ((ret = get_user_ual(arg6, sp_reg + 20)) != 0) {
| ^
linux-user/mips/cpu_loop.c:115:17: note: here
115 | case 5:
| ^~~~
Add the corresponding "fall through" comment to fix it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201030004046.2191790-5-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new generic support for NT_GNU_PROPERTY_TYPE_0.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is generic support, with the code disabled for all targets.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is slightly clearer than just using strerror, though
the different forms produced by error_setg_file_open and
error_setg_errno isn't entirely convenient.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-10-richard.henderson@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a bit clearer than open-coding some of this
with a bare c string.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-9-richard.henderson@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For BTI, we need to know if the executable is static or dynamic,
which means looking for PT_INTERP earlier.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The second loop uses a loop induction variable, and the first
does not. Transform the first to match the second, to simplify
a following patch moving code between them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-7-richard.henderson@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixing this now will clarify following patches.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-6-richard.henderson@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix an unlikely memory leak in load_elf_image().
Fixes: bf858897b7 ("linux-user: Re-use load_elf_image for the main binary.")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-5-richard.henderson@linaro.org
Message-Id: <20201003174944.1972444-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Transform the prot bit to a qemu internal page bit, and save
it in the page tables.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The kernel sets btype for the signal handler as if for a call.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
accept4() returned wrong errno, that did not match current linux
Signed-off-by: Matus Kysel <mkysel@tachyum.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200930151616.3588165-1-mkysel@tachyum.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It has been removed from linux since
61a47c1ad3a4 ("sysctl: Remove the sysctl system call")
It's a good news because it was not really supported by qemu.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200930003033.554124-5-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Update gensyscalls.sh not to generate an empty line at the end of the file
And then automatically update syscall_nr.h running scripts/gensyscalls.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200930003033.554124-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Same as d4247ec2d7 but for statfs64
When running rpm within qemu-arm-dynamic this could cause rpm fail with
an error like
"installing package A needs B MB on the C filesystem" depending on what
is in memory in f_flags.
af06db1d55/lib/transaction.c (L164)
Signed-off-by: Franz-Josef Haider <franz.haider@jolla.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <2e405fe7-efab-dae5-93d6-02575773fd6e@jolla.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The bug was triggered by the following code on aarch64-linux-user:
int main(void)
{
int PDeathSig = 0;
if (prctl(PR_GET_PDEATHSIG, &PDeathSig) == 0 && PDeathSig == SIGKILL)
prctl(PR_GET_PDEATHSIG, 0);
return (PDeathSig == SIGKILL);
}
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Ana Pazos <apazos@quicinc.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200507130302.3684-1-steplong@quicinc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The microblaze kernel does not support these, and uses
only rt style signal frames.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allows microblaze to pass tests/tcg/multiarch/linux-test.c.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the linux-user folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-7-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
On older kernels which don't implement MAP_FIXED_NOREPLACE the kernel
may still fail to give us the address we asked for despite having
already probed the map for a valid hole. Asserting isn't particularly
useful to the user so let us move the check up and expand the
error_report a little to give them a fighting chance of working around
the problem.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Bug 1895080 <1895080@bugs.launchpad.net>
Ameliorates: ee94743034
Message-Id: <20200915134317.11110-2-alex.bennee@linaro.org>
Target definitions of btrfs ioctls in 'syscall_defs.h' use
the value BTRFS_IOCTL_MAGIC that is defined header 'btrfs.h'.
This header is not available in kernel versions before 3.9.
For that reason, these target ioctl definitions should be
enwrapped in an #ifdef directive to check whether the 'btrfs.h'
header is available as to not cause build errors on older
Linux systems.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200905163802.2666-1-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
On ppc, in termios, c_line is after c_cc, not before .
Fixes: c218b4ede4 ("linux-user: Add missing termbits types and values definitions")
Cc: Filip.Bozuta@syrmia.com
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200830181620.422036-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
info->brk was erroneously set to the end of highest addressed
writable segment which could result it in overlapping the executable.
As per load_elf_binary in fs/binfmt_elf.c in Linux, it should be
set to end of highest addressed segment.
Signed-off-by: Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200728224615.326675-1-T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch introduces functionality for following time64 syscalls:
*ppoll_time64
This is a year 2038 safe variant of:
int poll(struct pollfd *fds, nfds_t nfds, int timeout)
-- wait for some event on a file descriptor --
man page: https://man7.org/linux/man-pages/man2/ppoll.2.html
*pselect6_time64
This is a year 2038 safe variant of:
int pselect6(int nfds, fd_set *readfds, fd_set *writefds,
fd_set *exceptfds, const struct timespec *timeout,
const sigset_t *sigmask);
-- synchronous I/O multiplexing --
man page: https://man7.org/linux/man-pages/man2/pselect6.2.html
Implementation notes:
Year 2038 safe syscalls in this patch were implemented
with the same code as their regular variants (ppoll() and pselect()).
This code was moved to new functions ('do_ppoll()' and 'do_pselect6()')
that take a 'bool time64' from which a right 'struct timespec' converting
function is called.
(target_to_host/host_to_target_timespec() for regular and
target_to_host/host_to_target_timespec64() for time64 variants)
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200824223050.92032-2-Filip.Bozuta@syrmia.com>
[lv: rebase and fix do_pselect6()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix MK_ARRAY()
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl9QKi0SHGxhdXJlbnRA
dml2aWVyLmV1AAoJEPMMOL0/L748fnMP/iOEIiotDBW7TQ6f2iOejvlSOsYN3Wtz
735srtaD5og/0oaYH+nQ9kVV0cY6ZObe2KA9JeyodogkhuwzXHPjKlKWHBNGUMtB
fdur65/1I9tNQDW+FfVc+4uT3Vk3lBoHEMCmmtVVRcB+coa7kAXtntqAQPAkjmow
lA7WeGg1sIKVd1Hg+gM9qkboxqi9t90sbd+bhhHy2lPcCJvGFIWFRcgwwvJzIP49
K6h551/zXe7mLQ1dG4dPvNHnpnS+0HhgVzUGuERjx1wNgoQN1adKPO8R3aQl1mr7
ZIPWmZw6blw6neG3rMYEaSvfS+AItPCxE5zlpsJibni34sYHRIrukDhtxj1UMrJX
mZmJgFQthUbd1vGYBTJNy6gb0IHc8TyrIhsjclSWDcdZytaEKALm6OmgEqT8VCVA
KvWg7gnxi2nuCHWCaGjslBSiH7PjtzeY5g4AOeEYGfi3IBaRYdUDdB4jr1x7zfqT
66ROoi9Uwg5+vnlRenTFX3f0gXFXuqpIJf4AB8HXv3R6dDw+lpeCZM1MFOtNOFCK
hKrRF/Jz+g69DqvFbM6L6qSEjsco0PoXVMscyqKJOV8XZdycf3wtEbFofLiV6cPH
TyiebOKQjOGszxmQVXkdC7LD8h+jI6ZJb1ox2j9boXBVNTNUpV3ydVDnErfwKNxs
1Xx8F/bOVLlX
=Pr4V
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.2-pull-request' into staging
Add btrfs support
Fix MK_ARRAY()
# gpg: Signature made Thu 03 Sep 2020 00:26:37 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-5.2-pull-request:
linux-user: Add support for btrfs ioctls used to scrub a filesystem
linux-user: Add support for btrfs ioctls used to manage quota
linux-user: Add support for two btrfs ioctls used for subvolume
linux-user: Add support for a group of btrfs inode ioctls
linux-user: Add support for btrfs ioctls used to get/set features
linux-user: Add support for btrfs ioctls used to manipulate with devices
linux-user: Add support for a group of btrfs ioctls used for snapshots
linux-user: Add support for a group of btrfs ioctls used for subvolumes
linux-user: fix implicit conversion from enumeration type error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements functionality for following ioctls:
BTRFS_IOC_SCRUB - Starting a btrfs filesystem scrub
Start a btrfs filesystem scrub. The third ioctls argument
is a pointer to a following type:
struct btrfs_ioctl_scrub_args {
__u64 devid; /* in */
__u64 start; /* in */
__u64 end; /* in */
__u64 flags; /* in */
struct btrfs_scrub_progress progress; /* out */
/* pad to 1k */
__u64 unused[(1024-32-sizeof(struct btrfs_scrub_progress))/8];
};
Before calling this ioctl, field 'devid' should be filled
with value that represents the device id of the btrfs filesystem
for which the scrub is to be started.
BTRFS_IOC_SCRUB_CANCEL - Canceling scrub of a btrfs filesystem
Cancel a btrfs filesystem scrub if it is running. The third
ioctls argument is ignored.
BTRFS_IOC_SCRUB_PROGRESS - Getting status of a running scrub
Read the status of a running btrfs filesystem scrub. The third
ioctls argument is a pointer to the above mentioned
'struct btrfs_ioctl_scrub_args'. Similarly as with 'BTRFS_IOC_SCRUB',
the 'devid' field should be filled with value that represents the
id of the btrfs device for which the scrub has started. The status
of a running scrub is returned in the field 'progress' which is
of type 'struct btrfs_scrub_progress' and its definition can be
found at:
https://elixir.bootlin.com/linux/latest/source/include/uapi/linux/btrfs.h#L150
Implementation nots:
Ioctls in this patch use type 'struct btrfs_ioctl_scrub_args' as their
third argument. That is the reason why an aproppriate thunk type
definition is added in file 'syscall_types.h'.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200823195014.116226-9-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Marc-André Lureau
Paolo Bonzini
Thomas Huth
Peter Maydell
Laurent Vivier
Chetan Pant
LemonBoy
Alistair Francis
Chen Qun
Richard Henderson
Philippe Mathieu-Daudé
Matus Kysel
Frajo
Stephen Long
Stefan Hajnoczi
zhaolichang
Alex Bennée
Filip Bozuta
Timothy Baldwin