On big endian targets, data arguments of qemu_ld/st ops have to be
byte swapped. Two temporary registers are needed for qemu_st to do
the bswap. r0 and r1 are used in system mode, do the same in user
mode, which implies reworking the constraints.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
While it make sense to pass a conditional argument to tcg_out_*()
functions as the ARM architecture allows that, it doesn't make sense
for qemu_ld/st functions. These functions use comparison instructions
and conditional execution already, so it is not possible to use a
second level of conditional execution.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add an bswap16 and bswap32 ops, either using the rev and rev16
instructions on ARMv6+ or shifts and logical operations on previous
ARM versions. In both cases the result use less instructions than
the pure TCG version.
These ops are also needed by the qemu_ld/st functions.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add an ext16u op, either using the uxth instruction on ARMv6+ or two
shifts on previous ARM versions. In both cases the result use the same
number or less instructions than the pure TCG version.
Also move all sign extension code to separate functions, so that they
can be reused in other parts of the code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use a set of variables to define the allowed ARM instructions, depending
on the __ARM_ARCH_*__ GCC defines.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The TCG ARM backends uses integer values to refer to both immediate
values and register number. This makes the code difficult to read.
The patch below replaces all (if I haven't miss any ;-) integer values
representing register number by TCG_REG_* enum values.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of writing very compact code, declare all registers that are
clobbered or reserved one by one. This makes the code easier to read.
Also declare all the 16 registers to TCG, and mark pc as reserved.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is no need to save the LR register (r14) before a call to a
subroutine. According to the "Procedure Call Standard for the ARM
Architecture", it is the job of the callee to save this register.
Moreover, this register is already saved in the prologue/epilogue.
This patch removes the disabled SAVE_LR code, as there is no need to
reenable later.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When qemu is invoked with an invalid initrd file, it crashes. Following
patch prints a error message and exits if an invalid initrd is
specified. Includes changes suggested by JV.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Trivial, as it never fails, doesn't have output nor return
any data.
Note that it's also available under QMP, as kvm-autotest
needs this.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Some people might think that this event is emitted whenever the
time changes, be more specific.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
virtio_blk_req_complete frees the request, so we can't access it any more when
calling bdrv_mon_event. Use the pointer that was copied earlier.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Second argument is now "on" or "off" instead of "up" or "down".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is a boolean value. Human monitor accepts "on" or "off".
Consistent with option parsing (see parse_option_bool()).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
To make 'b' available for boolean argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The conversion is shallow: client type init() methods aren't
converted. Converting them is a big job for relatively little
practical benefit, so leave it for later.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Both functions report errors nicely enough now, no need for additional
messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Fixes device_add to report duplicate ID properly in QMP, as
DuplicateId instead of UndefinedError.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add suitable comments to help keerp them in order.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Note: our device unplug methods don't need conversion work, because
they can't currently fail.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Currently when using the change command to switch the file in the cd drive
the command doesn't complain if the file doesn't exit or can't be opened
and the drive keeps the existing image. This patch adds a qerror_report
call to print a message out indicating the failure. This error message
can be used to catch failures.
Current behavior:
QEMU 0.12.50 monitor - type 'help' for more information
(qemu) info block
ide0-hd0: type=hd removable=0 file=/dev/null ro=0 drv=host_device encrypted=0
ide1-cd0: type=cdrom removable=1 locked=0 [not inserted]
floppy0: type=floppy removable=1 locked=0 [not inserted]
sd0: type=floppy removable=1 locked=0 [not inserted]
(qemu) change ide1-cd0 /home/rharper/work/isos/Fedora-9-i386-DVD.iso
(qemu) info block
ide0-hd0: type=hd removable=0 file=/dev/null ro=0 drv=host_device encrypted=0
ide1-cd0: type=cdrom removable=1 locked=0
file=/home/rharper/work/isos/Fedora-9-i386-DVD.iso ro=0 drv=raw encrypted=0
floppy0: type=floppy removable=1 locked=0 [not inserted]
sd0: type=floppy removable=1 locked=0 [not inserted]
(qemu) change ide1-cd0 /tmp/non_existent_file.iso
(qemu) info block
ide0-hd0: type=hd removable=0 file=/dev/null ro=0 drv=host_device encrypted=0
ide1-cd0: type=cdrom removable=1 locked=0 [not inserted]
floppy0: type=floppy removable=1 locked=0 [not inserted]
sd0: type=floppy removable=1 locked=0 [not inserted]
(qemu)
With patch:
QEMU 0.12.50 monitor - type 'help' for more information
(qemu) change ide1-cd0 /tmp/non_existent_file.iso
Could not open '/tmp/non_existent_file.iso'
(qemu)
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fixes clang errors:
CC i386-softmmu/kvm.o
/src/qemu/target-i386/kvm.c:40:9: error: 'dprintf' macro redefined
In file included from /src/qemu/target-i386/kvm.c:21:
In file included from /src/qemu/qemu-common.h:27:
In file included from /usr/include/stdio.h:910:
/usr/include/bits/stdio2.h:189:12: note: previous definition is here
CC i386-softmmu/kvm-all.o
/src/qemu/kvm-all.c:39:9: error: 'dprintf' macro redefined
In file included from /src/qemu/kvm-all.c:23:
In file included from /src/qemu/qemu-common.h:27:
In file included from /usr/include/stdio.h:910:
/usr/include/bits/stdio2.h:189:12: note: previous definition is here
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These clang errors are harmless but worth fixing:
CC ppc-softmmu/usb-ohci.o
/src/qemu/hw/usb-ohci.c:1104:59: error: if statement has empty body [-Wempty-body]
ohci->ctrl_head, ohci->ctrl_cur);
/src/qemu/hw/usb-ohci.c:1371:57: error: if statement has empty body [-Wempty-body]
DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum);
CC sparc64-softmmu/translate.o
/src/qemu/target-sparc/translate.c:3173:37: error: if statement has empty body [-Wempty-body]
; // XXX
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
use empty_slot device for the RAM which is not installed
Models without ECC don't trap when missing ram is accessed.
v0->v1 compile only once and fix indentation
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The empty_slot device emulates known to a bus but not connected devices.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These clang errors are harmless but worth fixing:
CC libhw64/fdc.o
/src/qemu/hw/fdc.c:998:74: error: if statement has empty body [-Wempty-body]
FLOPPY_DPRINTF("Floppy digital input register: 0x%02x\n", retval);
CC libhw64/cuda.o
/src/qemu/hw/cuda.c:320:66: error: if statement has empty body [-Wempty-body]
CUDA_DPRINTF("read: reg=0x%x val=%02x\n", (int)addr, val);
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There's a header file inclusion ordering problem between cpu-all.h
and qemu-timer.h, such that cpu_get_real_ticks is not defined when
we attempt to use it in profile_getclock.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rather than creating new temporaries for constants, use the
ones created in disas_sparc_insn. Remember the temps created
there so that they can be freed at the end of the function.
Profile data collected by TCG while booting sparc-test kernel:
-avg temps/TB 70.61 max=421
+avg temps/TB 62.75 max=66
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The 32 and 64-bit definitions were swapped in the ifdef.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Aurelien Jarno
M. Mohan Kumar
Luiz Capitulino
Kevin Wolf
Markus Armbruster
Ryan Harper
Blue Swirl
Artyom Tarasenko
malc
Richard Henderson