The new msys2-64bit job is often running for more than 50 minutes - and
if the CI is currently loaded, it times out after 60 minutes. The job
has been declared with a bigger timeout, but seems like this is getting
ignored on the shared Gitlab-CI Windows runners, so we're currently
seeing a lot of failures with this job. Thus we have to reduce the time
it takes to finish this job. Since we want to test compiling the WHPX
and HAX accelerator code with this job, switching to another target CPU
is not really a good option, so let's reduce the amount of code that we
have to compile with the --without-default-devices switch instead.
Message-Id: <20211216082253.43899-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Gitlab also provides runners with Windows, we can use them to
test compilation with MSYS2, in both, 64-bit and 32-bit.
However, it takes quite a long time to set up the VM, so to stay
in a reasonable time frame, we can only compile and check one
target here.
Message-Id: <20211115140623.104116-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Cirrus-CI provides KVM in their Linux containers, so we can also run
our VM-based NetBSD and OpenBSD build jobs there.
Since the VM installation might take a while, we only run the "help"
target on the first invocation to avoid timeouts, and then only check
the build during the next run, once the base image has been cached.
For the the build tests, we also only use very a limited set of target
CPUs since compiling in these VMs is not very fast (especially the
build on OpenBSD seems to be incredibly slow).
The jobs are marked as "manual" only, since this double-indirect setup
(with the cirrus-run script and VMs in the Cirrus-CI containers) might
fail more often than the other jobs, and since we can trigger a limited
amount of Cirrus-CI jobs at a time anyway (due to the restrictions in
the free tier of Cirrus). Thus these jobs are rather added as convenience
for contributors who would like to run the NetBSD/OpenBSD tests without
the need of downloading and installing the corresponding VM images on
their local machines.
Message-Id: <20211209103124.121942-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The device-crash-test script has been quite neglected in the past,
so that it bit-rot quite often. Let's add CI jobs that run this
script for at least some targets, so that this script does not
regress that easily anymore.
Message-Id: <20211126162724.1162049-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The jobs on Cirrus-CI sometimes get delayed quite a bit, waiting to
be scheduled, so while the build test itself finishes within 60 minutes,
the total run time of the jobs can be longer due to this waiting time.
Thus let's increase the timeout on the gitlab side a little bit, so
that these jobs are not marked as failing just because of the delay.
Message-Id: <20211116163309.246602-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On the primary QEMU repository we want the CI jobs to run on the staging
branch as a gating CI test.
Cirrus CI has very limited job concurrency, so if there are too many
jobs triggered they'll queue up and hit the GitLab CI job timeout before
they complete on Cirrus.
If we let Cirrus jobs run again on the master branch immediately after
merging from staging, that just increases the chances jobs will get
queued and subsequently timeout.
The same applies for merges to the stable branches.
User forks meanwhile should be allowed to run Cirrus CI jobs freely.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20211116112757.1909176-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
To ease maintenance, add the custom-runners/ directory and
split custom-runners.yml in 3 files, all included by the
current custom-runners.yml:
- ubuntu-18.04-s390x.yml
- ubuntu-20.04-aarch64.yml
- centos-stream-8-x86_64.yml
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211115095608.2436223-1-philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20211115142915.3797652-7-alex.bennee@linaro.org>
This introduces three different parts of a job designed to run
on a custom runner managed by Red Hat. The goals include:
a) propose a model for other organizations that want to onboard
their own runners, with their specific platforms, build
configuration and tests.
b) bring awareness to the differences between upstream QEMU and the
version available under CentOS Stream, which is "A preview of
upcoming Red Hat Enterprise Linux minor and major releases".
c) because of b), it should be easier to identify and reduce the gap
between Red Hat's downstream and upstream QEMU.
The components of this custom job are:
I) OS build environment setup code:
- additions to the existing "build-environment.yml" playbook
that can be used to set up CentOS/EL 8 systems.
- a CentOS Stream 8 specific "build-environment.yml" playbook
that adds to the generic one.
II) QEMU build configuration: a script that will produce binaries with
features as similar as possible to the ones built and packaged on
CentOS stream 8.
III) Scripts that define the minimum amount of testing that the
binaries built with the given configuration (point II) under the
given OS build environment (point I) should be subjected to.
IV) Job definition: GitLab CI jobs that will dispatch the build/test
jobs (see points #II and #III) to the machine specifically
configured according to #I.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20211111160501.862396-2-crosa@redhat.com>
Message-Id: <20211115142915.3797652-6-alex.bennee@linaro.org>
In the discussion about renaming the `tests/acceptance` [1], the
conclusion was that the folders inside `tests` are related to the
framework running the tests and not directly related to the type of
the tests.
This changes the folder to `tests/avocado` and adjusts the MAKEFILE, the
CI related files and the documentation.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-05/msg06553.html
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20211105155354.154864-3-willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Allows edk2 detect virtio-mmio devices and pcie ecam.
See comment in hw/i386/microvm-dt.c for more details.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20211014193617.2475578-1-kraxel@redhat.com>
The EDK2 firmware images built to test QEMU do not require
the following submodules:
- MdeModulePkg/Universal/RegularExpressionDxe/oniguruma
- UnitTestFrameworkPkg/Library/CmockaLib/cmocka
The only submodules required are:
- ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3
- BaseTools/Source/C/BrotliCompress/brotli
- CryptoPkg/Library/OpensslLib/openssl
- MdeModulePkg/Library/BrotliCustomDecompressLib/brotli
Adapt the buildsys machinery to only initialize the required
submodules.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211018105816.2663195-3-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A typo meant the substitution would not work, and the placeholder in the
target file didn't even exist.
The result was that tests were never run on the FreeBSD and macOS jobs,
only a basic build.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210915125452.1704899-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210917162332.3511179-10-alex.bennee@linaro.org>
The check-patch job is intended to be used by contributors or
subsystem maintainers to see if there are style mistakes. The
false positive rate is too high to be used in a gating scenario
so should not run it on the upstream repo ever.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210915125452.1704899-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210917162332.3511179-9-alex.bennee@linaro.org>
To be able to cross build QEMU itself we need to include a few more
libraries. These are only available in Debian's unstable ports repo
for now so we need to base the riscv64 image on sid with the the
minimal libs needed to build QEMU (glib/pixman).
The result works but is not as clean as using build-dep to bring in
more dependencies. However sid is by definition a shifting pile of
sand and by keeping the list of libs minimal we reduce the chance of
having an image we can't build. It's good enough for a basic cross
build testing of TCG.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210914185830.1378771-2-richard.henderson@linaro.org>
[AJB: tweak allow_failure]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210917162332.3511179-5-alex.bennee@linaro.org>
If a gitlab CI job is marked as manual-only but is not marked
as allow_failure, then gitlab considers that the pipeline is
"blocked" until the job has been manually triggered. We need
to mark these manual-only jobs as also allow_failure: true
so that gitlab doesn't insist that they have run before it
will consider the pipeline to be complete.
Fixes: 4c9af1ea14
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210915123412.8232-1-peter.maydell@linaro.org
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Currently we define a lot of jobs for our custom runners:
for both aarch64 and s390x we have
- all-linux-static
- all
- alldbg
- clang (manual)
- tci
- notcg (manual)
This is overkill. The main reason to run on these hosts is to get
coverage for the host architecture; we can leave the handling of
differences like debug vs non-debug to the x86 CI jobs.
The jobs are also generally running OK; they occasionally fail due to
timeouts, which is likely because we're overloading the machine by
asking it to run 4 CI jobs at once plus the ad-hoc CI.
Remove the 'allow_failure' tag from all these jobs, and switch the
s390x-alldbg, aarch64-all, s390x-tci and aarch64-tci jobs to manual.
(We keep -all on s390x and -alldbg on aarch64 just for diversity
of coverage.)
This will let us make the switch for s390x and aarch64 hosts from
the ad-hoc CI to gitlab.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20210913101948.12600-1-peter.maydell@linaro.org
libfdt in Debian is too old to be usable for QEMU. So far we were
silently falling back to the internal dtc submodule, but since
this is wrong, let's remove the --enable-fdt=system switch here now.
Message-Id: <20210827151718.178988-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- fix typo in execlog plugin
- clean-up and document gitlab FOO_RUNNER_AVAILABLE vars
- fix plugin build issue on OSX and modules
- add multi-core support to cache modelling plugin
- clean-ups for plugin arg=FOO handling
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmEwqF4ACgkQ+9DbCVqe
KkTCcAf/fCHK1hhXJIaxpFyMGvCkhYzUgKlpL4b05ofXFyQJ4JWp+0OadQzBcVIN
PwsVVsXik/5ibKvQiud8wt3/kbr9gj5RZdwVITZMEpod6hy9Nt5oaUhxEZpiVs3f
XZG17zaK8huwTwU6EtHWOnvIWMCuvBXpw8cM/6jF6pEiq162VJbiRo9L/aQ+n0Io
TZTy9YqEbrZUTj+XrvgPV0TewjM6T/zTujXFJtyCzYJ3P3kx9z5a3/KzfyJI9qkk
TYw0MX9MY8J5/sXcP6OjOqXqppsRe+G5Uaz0BoW9SvOmR/0nNGy/N8mVCZTD6mqs
zMsWw5RyIZsZCyWEYj4TYWEORv5Kiw==
=CBs1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-6.2-020921-1' into staging
Testing and plugin updates:
- fix typo in execlog plugin
- clean-up and document gitlab FOO_RUNNER_AVAILABLE vars
- fix plugin build issue on OSX and modules
- add multi-core support to cache modelling plugin
- clean-ups for plugin arg=FOO handling
# gpg: Signature made Thu 02 Sep 2021 11:33:02 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-6.2-020921-1: (22 commits)
docs/devel: be consistent about example plugin names
docs/deprecated: deprecate passing plugin args through `arg=`
tests/plugins/syscalls: adhere to new arg-passing scheme
tests/plugins/mem: introduce "track" arg and make args not positional
tests/plugins/insn: made arg inline not positional and parse it as bool
tests/plugins/bb: adapt to the new arg passing scheme
docs/tcg-plugins: new passing parameters scheme for cache docs
plugins/howvec: adapting to the new argument passing scheme
plugins/hwprofile: adapt to the new plugin arguments scheme
plugins/lockstep: make socket path not positional & parse bool arg
plugins/hotblocks: Added correct boolean argument parsing
plugins/hotpages: introduce sortby arg and parsed bool args correctly
plugins/api: added a boolean parsing plugin api
plugins: allow plugin arguments to be passed directly
docs/devel/tcg-plugins: added cores arg to cache plugin
plugins: sort exported symbol list
plugins/cache: supported multicore cache modelling
plugins: do not limit exported symbols if modules are active
gitlab-ci: Fix ..._RUNNER_AVAILABLE variables and document them
gitlab-ci: Remove superfluous "dnf install" statement
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The patch that recently introduced the S390X_RUNNER_AVAILABLE variable
in custom-runners.yml missed that the bottom half of the file is rather
about aarch64 than s390x. Thus rename the S390X_RUNNER_AVAILABLE to
AARCH64_RUNNER_AVAILABLE in those jobs.
Finally mention both variables in our CI documentation, too.
Fixes: c5dd0f0342 ("Improve rules for the staging branch")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210730143809.717079-4-thuth@redhat.com>
[AJB: moved due to docu changes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210806141015.2487502-5-alex.bennee@linaro.org>
The container already features meson and ninja, so there is no need
to try to install it with dnf again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210730143809.717079-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210806141015.2487502-4-alex.bennee@linaro.org>
Both jobs are testing more or less the same thing (building QEMU with
features disabled), so we are wasting precious CI cycles here by doing
this twice. Merge the jobs by using --without-default-features by default
and just adding some additional --disable-... switches which are not
covered by the generic switch (yet). And while we're at it, also test
compilation with "--disable-fdt" (which forces us to change the list
of targets in this job, though, since some targets do not work without
fdt).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210730143809.717079-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210806141015.2487502-3-alex.bennee@linaro.org>
Give a good name to test file.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-29-vsementsov@virtuozzo.com>
[hreitz: Adjust .gitlab-ci.d/buildtest.yml]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The windows cross builds still take way too long in gitlab CI, so need
more targets to be skipped. We don't want to hurt coverage of other
cross builds more though, so we let jobs fine tune with a new env
variale $CROSS_SKIP_TARGETS.
We take the set of targets that are considered relatively niche or
very old architectures, and skip approx half of them in win32 builds
and the other half of them in win64.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210810140653.3969823-3-berrange@redhat.com>
[thuth: Swapped the "CROSS_SKIP_TARGETS:" lines as suggested by philmd]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We need to cut down compile time by excluding more targets. Both these
targets still have their 64-bit variant enabled, so the loss of coverage
is mitigated to some degree.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210810140653.3969823-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If maintainers are currently pushing to a branch called "staging"
in their repository, they are ending up with some stuck jobs - unless
they have a s390x CI runner machine available. That's ugly, we should
make sure that the related jobs are really only started if such a
runner is available. So let's only run these jobs if it's the
"staging" branch of the main repository of the QEMU project (where
we can be sure that the s390x runner is available), or if the user
explicitly set a S390X_RUNNER_AVAILABLE variable in their CI configs
to declare that they have such a runner available, too.
Fixes: 4799c21023 ("Jobs based on custom runners: add job definitions ...")
Message-Id: <20210728173857.497523-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These two jobs are currently failing very often - the linker seems to
get killed due to out-of-memory problems. Since apparently nobody has
currently an idea how to fix that nicely, let's mark the jobs as manual
for the time being until someone comes up with a proper fix.
Message-Id: <20210728075141.400816-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The iotests 197 and 215 are occasionally failing in the gitlab-CI now.
According to the log, the failure is "./common.rc: Killed" which might
be an indication that the process has been killed due to out-of-memory
reasons. Both tests are doing a big read with 2G that likely causes
this issue. It used to work fine in the gitlab-CI in the past, but
either the program is now requiring more free memory, or the the CI
containers have changed, so that the OOM condition now sometimes occurs.
Anyway, these two tests are not really suitable for CI containers if
they are doing things like huge reads (which is likely also the reason
why they haven't been added to the "auto" group in the past), so let's
simply disable them in the gitlab-CI now, too.
Message-Id: <20210727162542.318882-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Jobs depending on another should not use the 'when: always'
condition, because if a dependency failed we should not keep
running jobs depending on it. The correct condition is
'when: on_success'.
Fixes: c6fc0fc1a7 ("gitlab-ci.yml: Add jobs to build OpenSBI firmware binaries")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210727142431.1672530-5-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Jobs depending on another should not use the 'when: always'
condition, because if a dependency failed we should not keep
running jobs depending on it. The correct condition is
'when: on_success'.
Fixes: 71920809ce ("gitlab-ci.yml: Add jobs to build EDK2 firmware binaries")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210727142431.1672530-4-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Jobs depending on another should not use the 'when: always'
condition, because if a dependency failed we should not keep
running jobs depending on it. The correct condition is
'when: on_success'.
Fixes: f56bf4caf7 ("gitlab: Run Avocado tests manually (except mainstream CI)")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210727142431.1672530-3-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- git ignore some file editor detritus
- add overview on device emulation terminology
- remove needless if leg in configure custom devices logic
- numerous gitdm/mailmap updates
- fix plugin_exit race for linux-user
- fix a few bugs in cache modelling plugin
- fix plugin calculation of physical address
- handle pure assembler/linker tcg tests outside of docker
- add tricore build to gitlab
- remove superfluous MacOSX task
- generalise the OpenBSI gitlab rules
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmD67ioACgkQ+9DbCVqe
KkTKcwf/UlEl2wlYrvymoJy7caasD/UrlNwpaK90zRTxuofJjG2bXX/58EGBlgxe
cjbX3841702HXAFDxzswmWX3yeXQVgNiXrEy5FapB7L3h/qC/BDVS4pz987TITNW
b4lw/d05bQVGavcdJXPnX0CdV8IK4hpieDkdh/LGj5+CSAC39jvyVGTYBpfLKl8D
cps5qcJcJuQjz4hatB1haZOV1WHLyw8KI0srfcEqkh3IImZFZ09frs3qqAxrYRqE
Y62d7SIN5TX1XgWuTaf1mmaMVmbNi9DTdCxWpGYr4ZBLhhzKeljQvKbF45ZGQ0z9
eBVBdxGJTX/WAKrimcbHxLo43pCo2Q==
=7vzj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-6.1-rc1-230721-1' into staging
Doc, metadata, plugin and testing updates for 6.1-rc1:
- git ignore some file editor detritus
- add overview on device emulation terminology
- remove needless if leg in configure custom devices logic
- numerous gitdm/mailmap updates
- fix plugin_exit race for linux-user
- fix a few bugs in cache modelling plugin
- fix plugin calculation of physical address
- handle pure assembler/linker tcg tests outside of docker
- add tricore build to gitlab
- remove superfluous MacOSX task
- generalise the OpenBSI gitlab rules
# gpg: Signature made Fri 23 Jul 2021 17:28:26 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-6.1-rc1-230721-1: (28 commits)
gitlab-ci: Extract OpenSBI job rules to reusable section
gitlab-ci: Remove the second superfluous macos task
gitlab: enable a very minimal build with the tricore container
tests/tcg/configure.sh: add handling for assembler only builds
plugins: Fix physical address calculation for IO regions
plugins/cache: Fixed "function decl. is not a prototype" warnings
plugins/cache: limited the scope of a mutex lock
plugins/cache: Fixed a bug with destroying FIFO metadata
tcg/plugins: implement a qemu_plugin_user_exit helper
contrib/gitdm: add more individual contributor entries.
contrib/gitdm: add a new interns group-map for GSoC/Outreachy work
contrib/gitdm: add an explicit academic entry for BU
contrib/gitdm: add group-map for Netflix
contrib/gitdm: add domain-map for NVIDIA
contrib/gitdm: add domain-map for Crudebyte
contrib/gitdm: un-ironically add a mapping for LWN
contrib/gitdm: add domain-map/group-map for Wind River
contrib/gitdm: add domain-map for Eldorado
contrib/gitdm: add domain-map/group-map mappings for Samsung
gitdm.config: sort the corporate GroupMap entries
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All jobs depending on 'docker-opensbi' job must use at most all
the rules that triggers it. The simplest way to ensure that
is to always use the same rules. Extract all the rules to a
reusable section, and include this section (with the 'extends'
keyword) in both 'docker-opensbi' and 'build-opensbi' jobs.
The problem was introduced in commit c6fc0fc1a7 ("gitlab-ci.yml:
Add jobs to build OpenSBI firmware binaries"), but was revealed in
commit 91e9c47e50 ("docker: OpenSBI build job depends on OpenSBI
container").
This fix is similar to the one used with the EDK2 firmware job in
commit ac0595cf6b ("gitlab-ci: Extract EDK2 job rules to reusable
section").
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210720164829.3949558-1-philmd@redhat.com>
Message-Id: <20210720232703.10650-30-alex.bennee@linaro.org>
While there might have been bigger differnces between the -base and
the -xcode images in the beginning, they almost vanished in the
current builds, e.g. when comparing the output of the "configure"
step after cleaning up the differences due to temporary path names,
I only get:
$ diff -u /tmp/base.txt /tmp/xcode.txt
--- /tmp/base.txt 2021-07-16 09:16:24.211427940 +0200
+++ /tmp/xcode.txt 2021-07-16 09:16:43.029684274 +0200
@@ -19,14 +19,14 @@
Build type: native build
Project name: qemu
Project version: 6.0.50
-C compiler for the host machine: cc (clang 12.0.0 "Apple clang version 12.0.0 (clang-1200.0.32.29)")
+C compiler for the host machine: cc (clang 12.0.0 "Apple clang version 12.0.0 (clang-1200.0.32.28)")
C linker for the host machine: cc ld64 609.8
Host machine cpu family: x86_64
Host machine cpu: x86_64
Program sh found: YES (/bin/sh)
Program python3 found: YES (/usr/local/opt/python@3.9/bin/python3.9)
Program bzip2 found: YES (/usr/bin/bzip2)
-C++ compiler for the host machine: c++ (clang 12.0.0 "Apple clang version 12.0.0 (clang-1200.0.32.29)")
+C++ compiler for the host machine: c++ (clang 12.0.0 "Apple clang version 12.0.0 (clang-1200.0.32.28)")
C++ linker for the host machine: c++ ld64 609.8
Objective-C compiler for the host machine: clang (clang 12.0.0)
Objective-C linker for the host machine: clang ld64 609.8
Since we're not using Xcode itself at all, it seems like it does not
make much sense anymore to waste compute cycles with two images here.
Thus let's delete the -xcode job now.
[AJB: fix up commit formatting which trips up b4]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210719073051.1559348-1-thuth@redhat.com>
Message-Id: <20210720232703.10650-29-alex.bennee@linaro.org>
Rather than base of the shared Debian 10 container which would require
us to bring in even more dependencies just bring in what is needed for
building tricore-softmmu in GitLab. We don't even remove the container
from the DOCKER_PARTIAL_IMAGES lest we cause more confusion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210720232703.10650-28-alex.bennee@linaro.org>
GitLab will happily publish pages generated by the latest CI pipeline
from any branch:
https://docs.gitlab.com/ee/user/project/pages/introduction.html
"Remember that GitLab Pages are by default branch/tag agnostic
and their deployment relies solely on what you specify in
.gitlab-ci.yml. You can limit the pages job with the only
parameter, whenever a new commit is pushed to a branch used
specifically for your pages."
The current "pages" job is not limited, so it is happily publishing
docs content from any branch/tag in qemu.git that gets pushed to.
This means we're potentially publishing from the "staging" branch
or worse from outdated "stable-NNN" branches
This change restricts it to only publish from the default branch
in the main repository. For contributor forks, however, we allow
it to publish from any branch, since users will have arbitrarily
named topic branches in flight at any time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210723113051.2792799-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build windows installer for qemu in gitlab CI,
store the result as artifact.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210623091137.1156959-2-kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- custom runner playbooks for configuring GitLab runners
- integrate Cirrus jobs into GitLab via cirrus-run
- clean-up docker package lists
- bump NetBSD to 9.2
- bump OpenBSD to 6.9
- make test-mmap more hexagon friendly
- fixup handling of hostaddr for plugins
- disallow some incompatible plugin configurations
- fix handling of -ldl for BSDs
- remove some old unused symbols from the plugin symbol map
- enable plugins by default for most TCG builds
- honour main build -Wall settings for plugins
- new execlog plugin
- new cache modelling plugin
- fix io_uring build regression
- disable modular TCG on Darwin
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmDu+xsACgkQ+9DbCVqe
KkQ2XAf+MRBeSMX9J091iloiqSjpuobAcVuoIFciG7gEqWd2iTQVPDqJNgBJUANQ
vTA7f89ljxj/FZjSZwLgR6cqY6X0ufXI1BLEIt7s78LJtVp14sHVo89GwNBzmRwo
615T49KG8b5EBBU5YlVcAW/m8DlfgI4b1ufS/qHldOukKegu+haoCDjGG6RNpYNx
mmXgLOBJiB/p2u2S73KTIa+3AEIIlsTJZpdLPus8hby+/Q4qB9t8YbdHaweyM9qs
NjiojczvlbHLFd/IQSl6fqBS9QI+KWf4+oFd6ZB4THhr9/GUYTiMeLjRKucBgDQG
TwGtd1RN3gAPI5aEJ0xlgCL/crz1qg==
=dQl6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugins-140721-5' into staging
Testing and plugin updates:
- custom runner playbooks for configuring GitLab runners
- integrate Cirrus jobs into GitLab via cirrus-run
- clean-up docker package lists
- bump NetBSD to 9.2
- bump OpenBSD to 6.9
- make test-mmap more hexagon friendly
- fixup handling of hostaddr for plugins
- disallow some incompatible plugin configurations
- fix handling of -ldl for BSDs
- remove some old unused symbols from the plugin symbol map
- enable plugins by default for most TCG builds
- honour main build -Wall settings for plugins
- new execlog plugin
- new cache modelling plugin
- fix io_uring build regression
- disable modular TCG on Darwin
# gpg: Signature made Wed 14 Jul 2021 15:56:27 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-plugins-140721-5: (44 commits)
MAINTAINERS: Added myself as a reviewer for TCG Plugins
docs/devel: Added cache plugin to the plugins docs
plugins/cache: Added FIFO and LRU eviction policies
plugins/cache: Enable cache parameterization
plugins: Added a new cache modelling plugin
docs/devel: tcg-plugins: add execlog plugin description
contrib/plugins: add execlog to log instruction execution and memory access
contrib/plugins: enable -Wall for building plugins
tcg/plugins: enable by default for most TCG builds
configure: stop user enabling plugins on Windows for now
configure: add an explicit static and plugins check
configure: don't allow plugins to be enabled for a non-TCG build
tcg/plugins: remove some stale entries from the symbol list
meson.build: relax the libdl test to one for the function dlopen
meson.build: move TCG plugin summary output
plugins: fix-up handling of internal hostaddr for 32 bit
tests/tcg: make test-mmap a little less aggressive
tests/vm: update openbsd to release 6.9
tests/vm: update NetBSD to 9.2
tests/docker: expand opensuse-leap package list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All jobs depending on 'docker-edk2' job must use at most all
the rules that triggers it. The simplest way to ensure that
is to always use the same rules. Extract all the rules to a
reusable section, and include this section (with the 'extends'
keyword) in both 'docker-edk2' and 'build-edk2' jobs.
The problem was introduced in commit 71920809ce ("gitlab-ci.yml:
Add jobs to build EDK2 firmware binaries"), but was revealed in
commit 1925468ddb ("docker: EDK2 build job depends on EDK2
container") and eventually failed on CI:
https://gitlab.com/qemu-project/qemu/-/pipelines/335995843
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210714101003.3113726-1-philmd@redhat.com>
Aside from a minor bloat to file size the ability to have TCG plugins
has no real impact on performance unless a plugin is actively loaded.
Even then the libempty.so plugin shows only a minor degradation in
performance caused by the extra book keeping the TCG has to do to keep
track of instructions. As it's a useful feature lets just enable it by
default and reduce our testing matrix a little.
We need to move our linker testing earlier so we can be sure we can
enable the loader module required. As we have ruled out static &
plugins in an earlier patch we can also reduce the indent a little.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210709143005.1554-33-alex.bennee@linaro.org>
This adds support for running 4 jobs via Cirrus CI runners:
* FreeBSD 12
* FreeBSD 13
* macOS 11 with default XCode
* macOS 11 with latest XCode
The gitlab job uses a container published by the libvirt-ci
project (https://gitlab.com/libvirt/libvirt-ci) that contains
the 'cirrus-run' command. This accepts a short yaml file that
describes a single Cirrus CI job, runs it using the Cirrus CI
REST API, and reports any output to the console.
In this way Cirrus CI is effectively working as an indirect
custom runner for GitLab CI pipelines. The key benefit is that
Cirrus CI job results affect the GitLab CI pipeline result and
so the user only has look at one CI dashboard.
[AJB: remove $TEMPORARILY_DISABLED condition, s/py37/py38/]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210625172211.451010-3-berrange@redhat.com>
Message-Id: <20210709143005.1554-8-alex.bennee@linaro.org>
The QEMU project has two machines (aarch64 and s390x) that can be used
for jobs that do build and run tests. This introduces those jobs,
which are a mapping of custom scripts used for the same purpose.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210630012619.115262-5-crosa@redhat.com>
Message-Id: <20210709143005.1554-5-alex.bennee@linaro.org>
As described in the included documentation, the "custom runner" jobs
extend the GitLab CI jobs already in place. One of their primary
goals of catching and preventing regressions on a wider number of host
systems than the ones provided by GitLab's shared runners.
This sets the stage in which other community members can add their own
machine configuration documentation/scripts, and accompanying job
definitions. As a general rule, those newly added contributed jobs
should run as "non-gating", until their reliability is verified (AKA
"allow_failure: true").
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210630012619.115262-2-crosa@redhat.com>
Message-Id: <20210709143005.1554-2-alex.bennee@linaro.org>
Currently tox tests against the installed interpreters, however if any
supported interpreter is absent then it will return fail. It seems not
reasonable to expect developers to have all supported interpreters
installed on their systems. Luckily tox can be configured to skip
missing interpreters.
This changed the tox setup so that missing interpreters are skipped by
default. On the CI, however, we still want to enforce it tests
against all supported. This way on CI the
--skip-missing-interpreters=false option is passed to tox.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210630184546.456582-1-wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Well, Cleber was right, this is a better name.
In preparation for adding a different kind of virtual environment check
(One that simply uses whichever version of Python you happen to have),
rename this test 'check-pipenv' so that it matches the CI job
'check-python-pipenv'.
Remove the "If you don't know which test to run" hint, because it's not
actually likely you have Python 3.6 installed to be able to run the
test. It's still the test I'd most prefer you to run, but it's not the
test you are most likely to be able to run.
Rename the 'venv' target to 'pipenv' as well, and move the more
pertinent help text under the 'check-pipenv' target.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Rather than relying on external tweaks lets just do it inside
checkpatch's direct commitish handling which is QEMU specific code
anyway.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210623102749.25686-4-alex.bennee@linaro.org>
This job is hitting the 70min limit, so split it in 2 tasks.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210525082556.4011380-7-f4bug@amsat.org>
This copies the behaviour of patchew's configuration to make the diff
algorithm generate a minimal diff.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210602153247.27651-1-alex.bennee@linaro.org>
* Bump minimum versions of some requirements after removing CentOS 7 support
-----BEGIN PGP SIGNATURE-----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=RAkI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-06-02' into staging
* Update the references to some doc files (use *.rst instead of *.txt)
* Bump minimum versions of some requirements after removing CentOS 7 support
# gpg: Signature made Wed 02 Jun 2021 08:12:18 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-06-02:
configure: bump min required CLang to 6.0 / XCode 10.0
configure: bump min required GCC to 7.5.0
configure: bump min required glib version to 2.56
tests/docker: drop CentOS 7 container
tests/vm: convert centos VM recipe to CentOS 8
crypto: drop used conditional check
crypto: bump min gnutls to 3.5.18, dropping RHEL-7 support
crypto: bump min gcrypt to 1.8.0, dropping RHEL-7 support
crypto: drop back compatibility typedefs for nettle
crypto: bump min nettle to 3.4, dropping RHEL-7 support
patchew: move quick build job from CentOS 7 to CentOS 8 container
block/ssh: Bump minimum libssh version to 0.8.7
docs: fix references to docs/devel/s390-dasd-ipl.rst
docs: fix references to docs/specs/tpm.rst
docs: fix references to docs/devel/build-system.rst
docs: fix references to docs/devel/atomics.rst
docs: fix references to docs/devel/tracing.rst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-10-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
