While the tracing framework does not forbid trailing newline in
events format string, using them lead to confuse output.
It is the responsibility of the backend to properly end an event
line.
Some of our formats have trailing newlines, remove them.
[Fixed typo in commit description reported by Eric Blake
<eblake@redhat.com>
--Stefan]
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-2-philmd@redhat.com
Message-Id: <20190916095121.29506-2-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A server may have a reason to reject a request for structured replies,
beyond just not recognizing them as a valid request; similarly, it may
have a reason for rejecting a request for a meta context. It doesn't
hurt us to continue talking to such a server; otherwise 'qemu-nbd
--list' of such a server fails to display all available details about
the export.
Encountered when temporarily tweaking nbdkit to reply with
NBD_REP_ERR_POLICY. Present since structured reply support was first
added (commit d795299b reused starttls handling, but starttls is
different in that we can't fall back to other behavior on any error).
Note that for an unencrypted client trying to connect to a server that
requires encryption, this defers the point of failure to when we
finally execute a strict command (such as NBD_OPT_GO or NBD_OPT_LIST),
now that the intermediate NBD_OPT_STRUCTURED_REPLY does not diagnose
NBD_REP_ERR_TLS_REQD as fatal; but as the protocol eventually gets us
to a command where we can't continue onwards, the changed error
message doesn't cause any security concerns.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190824172813.29720-3-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[eblake: fix iotest 233]
We've recently added traces for clients to flag server non-compliance;
let's do the same for servers to flag client non-compliance. According
to the spec, if the client requests NBD_INFO_BLOCK_SIZE, it is
promising to send all requests aligned to those boundaries. Of
course, if the client does not request NBD_INFO_BLOCK_SIZE, then it
made no promises so we shouldn't flag anything; and because we are
willing to handle clients that made no promises (the spec allows us to
use NBD_REP_ERR_BLOCK_SIZE_REQD if we had been unwilling), we already
have to handle unaligned requests (which the block layer already does
on our behalf). So even though the spec allows us to return EINVAL
for clients that promised to behave, it's easier to always answer
unaligned requests. Still, flagging non-compliance can be useful in
debugging a client that is trying to be maximally portable.
Qemu as client used to have one spot where it sent non-compliant
requests: if the server sends an unaligned reply to
NBD_CMD_BLOCK_STATUS, and the client was iterating over the entire
disk, the next request would start at that unaligned point; this was
fixed in commit a39286dd when the client was taught to work around
server non-compliance; but is equally fixed if the server is patched
to not send unaligned replies in the first place (yes, qemu 4.0 as
server still has few such bugs, although they will be patched in
4.1). Fortunately, I did not find any more spots where qemu as client
was non-compliant. I was able to test the patch by using the following
hack to convince qemu-io to run various unaligned commands, coupled
with serving 512-byte alignment by intentionally omitting '-f raw' on
the server while viewing server traces.
| diff --git i/nbd/client.c w/nbd/client.c
| index 427980bdd22..1858b2aac35 100644
| --- i/nbd/client.c
| +++ w/nbd/client.c
| @@ -449,6 +449,7 @@ static int nbd_opt_info_or_go(QIOChannel *ioc, uint32_t opt,
| nbd_send_opt_abort(ioc);
| return -1;
| }
| + info->min_block = 1;//hack
| if (!is_power_of_2(info->min_block)) {
| error_setg(errp, "server minimum block size %" PRIu32
| " is not a power of two", info->min_block);
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190403030526.12258-3-eblake@redhat.com>
[eblake: address minor review nits]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tracked down with cleanup-trace-events.pl. Funnies requiring manual
post-processing:
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_udp_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-5-armbru@redhat.com
Message-Id: <20190314180929.27722-5-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Almost all trace-events point to docs/devel/tracing.txt in a comment
right at the beginning. Touch up the ones that don't.
[Updated with Markus' new commit description wording.
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-2-armbru@redhat.com
Message-Id: <20190314180929.27722-2-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename the function to nbd_opt_info_or_go() with an added parameter
and slight changes to comments and trace messages, in order to
reuse the function for NBD_OPT_INFO.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190117193658.16413-17-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
An upcoming patch will add the ability for qemu-nbd to list
the services provided by an NBD server. Share the common
code of the TLS handshake by splitting the initial exchange
into a separate function, leaving only the export handling
in the original function. Functionally, there should be no
change in behavior in this patch, although some of the code
motion may be difficult to follow due to indentation changes
(view with 'git diff -w' for a smaller changeset).
I considered an enum for the return code coordinating state
between the two functions, but in the end just settled with
ample comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190117193658.16413-15-eblake@redhat.com>
Extract portions of nbd_negotiate_simple_meta_context() to
a new function nbd_receive_one_meta_context() that copies the
pattern of nbd_receive_list() for performing the argument
validation of one reply. The error message when the server
replies with more than one context changes slightly, but
that shouldn't happen in the common case.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190117193658.16413-13-eblake@redhat.com>
Refactor nbd_negotiate_simple_meta_context() to pull out the
code that can be reused to send a LIST request for 0 or 1 query.
No semantic change. The old comment about 'sizeof(uint32_t)'
being equivalent to '/* number of queries */' is no longer
needed, now that we are computing 'sizeof(queries)' instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20190117193658.16413-12-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Refactor the 'name' parameter of nbd_receive_negotiate() from
being a separate parameter into being part of the in-out 'info'.
This also spills over to a simplification of nbd_opt_go().
The main driver for this refactoring is that an upcoming patch
would like to add support to qemu-nbd to list information about
all exports available on a server, where the name(s) will be
provided by the server instead of the client. But another benefit
is that we can now allow the client to explicitly specify the
empty export name "" even when connecting to an oldstyle server
(even if qemu is no longer such a server after commit 7f7dfe2a).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190117193658.16413-10-eblake@redhat.com>
Right now, nbd_receive_list() is only called by
nbd_receive_query_exports(), which in turn is only called if the
server lacks NBD_OPT_GO but has working option negotiation, and is
merely used as a quality-of-implementation trick since servers
can't give decent errors for NBD_OPT_EXPORT_NAME. However, servers
that lack NBD_OPT_GO are becoming increasingly rare (nbdkit was a
latecomer, in Aug 2018, but qemu has been such a server since commit
f37708f6 in July 2017 and released in 2.10), so it no longer makes
sense to micro-optimize that function for performance.
Furthermore, when debugging a server's implementation, tracing the
full reply (both names and descriptions) is useful, not to mention
that upcoming patches adding 'qemu-nbd --list' will want to collect
that data. And when you consider that a server can send an export
name up to the NBD protocol length limit of 4k; but our current
NBD_MAX_NAME_SIZE is only 256, we can't trace all valid server
names without more storage, but 4k is large enough that the heap
is better than the stack for long names.
Thus, I'm changing the division of labor, with nbd_receive_list()
now always malloc'ing a result on success (the malloc is bounded
by the fact that we reject servers with a reply length larger
than 32M), and moving the comparison to 'wantname' to the caller.
There is a minor change in behavior where a server with 0 exports
(an immediate NBD_REP_ACK reply) is now no longer distinguished
from a server without LIST support (NBD_REP_ERR_UNSUP); this
information could be preserved with a complication to the calling
contract to provide a bit more information, but I didn't see the
point. After all, the worst that can happen if our guess at a
match is wrong is that the caller will get a cryptic disconnect
when NBD_OPT_EXPORT_NAME fails (which is no different from what
would happen if we had not tried LIST), while treating an empty
list as immediate failure would prevent connecting to really old
servers that really did lack LIST. Besides, NBD servers with 0
exports are rare (qemu can do it when using QMP nbd-server-start
without nbd-server-add - but qemu understands NBD_OPT_GO and
thus won't tickle this change in behavior).
Fix the spelling of foundExport to match coding standards while
in the area.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190117193658.16413-9-eblake@redhat.com>
Not all servers send free-form text alongside option error replies, but
for servers that do (such as qemu), we pass the server's message as a
hint alongside our own error reporting. However, it would also be
useful to trace such server messages, since we can't guarantee how the
hint may be consumed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181218225714.284495-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Handle a new NBD meta namespace: "qemu", and corresponding queries:
"qemu:dirty-bitmap:<export bitmap name>".
With the new metadata context negotiated, BLOCK_STATUS query will reply
with dirty-bitmap data, converted to extents. The new public function
nbd_export_bitmap selects which bitmap to export. For now, only one bitmap
may be exported.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180609151758.17343-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: wording tweaks, minor cleanups, additional tracing]
Signed-off-by: Eric Blake <eblake@redhat.com>
Having a more detailed log of the interaction between client and
server is invaluable in debugging how meta context negotiation
actually works.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180330130950.1931229-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
1. NBD_REP_ERR_INVALID is not only about length, so, make message more
general
2. hex format is not very good: it's hard to read something like
"option a (set meta context)", so switch to dec.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1518702707-7077-6-git-send-email-vsementsov@virtuozzo.com>
[eblake: expand scope of patch: ALL uses of nbd_opt_lookup and
nbd_rep_lookup are now decimal]
Signed-off-by: Eric Blake <eblake@redhat.com>
The reason that NBD added structured reply in the first place was
to allow for efficient reads of sparse files, by allowing the
reply to include chunks to quickly communicate holes to the client
without sending lots of zeroes over the wire. Time to implement
this in the server; our client can already read such data.
We can only skip holes insofar as the block layer can query them;
and only if the client is okay with a fragmented request (if a
client requests NBD_CMD_FLAG_DF and the entire read is a hole, we
could technically return a single NBD_REPLY_TYPE_OFFSET_HOLE, but
that's a fringe case not worth catering to here). Sadly, the
control flow is a bit wonkier than I would have preferred, but
it was minimally invasive to have a split in the action between
a fragmented read (handled directly where we recognize
NBD_CMD_READ with the right conditions, and sending multiple
chunks) vs. a single read (handled at the end of nbd_trip, for
both simple and structured replies, when we know there is only
one thing being read). Likewise, I didn't make any effort to
optimize the final chunk of a fragmented read to set the
NBD_REPLY_FLAG_DONE, but unconditionally send that as a separate
NBD_REPLY_TYPE_NONE.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171107030912.23930-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The NBD spec was recently clarified to state that a read of length 0
should not be attempted by a compliant client; but that a server must
still handle it correctly in an unspecified manner (that is, either
a successful no-op or an error reply, but not a crash) [1]. However,
it also implies that NBD_REPLY_TYPE_OFFSET_DATA must have a non-zero
payload length, but our existing code was replying with a chunk
that a picky client could reject as invalid because it was missing
a payload (our own client implementation was recently patched to be
that picky, after first fixing it to not send 0-length requests).
We are already doing successful no-ops for 0-length writes and for
non-structured reads; so for consistency, we want structured reply
reads to also be a no-op. The easiest way to do this is to return
a NBD_REPLY_TYPE_NONE chunk; this is best done via a new helper
function (especially since future patches for other structured
replies may benefit from using the same helper).
[1] https://github.com/NetworkBlockDevice/nbd/commit/ee926037
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-8-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
It's useful to know which structured reply chunk is being processed.
Missed in commit d2febedb.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
In following patch nbd_receive_reply will be used both for simple
and structured reply header receiving.
NBDReply is altered into union of simple reply header and structured
reply chunk header, simple error translation moved to block/nbd-client
to be consistent with further structured reply error translation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-11-eblake@redhat.com>
Split out nbd_request_simple_option to be reused for structured reply
option.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-10-eblake@redhat.com>
The NBD spec permits including a human-readable error string if
structured replies are in force, so we might as well send the
client the message that we logged on any error.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-9-eblake@redhat.com>
Minimal implementation of structured read: one structured reply chunk,
no segmentation.
Minimal structured error implementation: no text message.
Support DF flag, but just ignore it, as there is no segmentation any
way.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-8-eblake@redhat.com>
This is needed in preparation for structured reply handling,
as we will be performing the translation from NBD error to
system errno value higher in the stack at block/nbd-client.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-3-eblake@redhat.com>
NBD errors were originally sent over the wire based on Linux errno
values; but not all the world is Linux, and not all platforms share
the same values. Since a number isn't very easy to decipher on all
platforms, update the trace messages to include the name of NBD
errors being sent/received over the wire. Tweak the trace messages
to be at the point where we are using the NBD error, not the
translation to the host errno values.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-2-eblake@redhat.com>
Use packed structure instead of pointer arithmetics.
Also, merge two redundant traces into one.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171012095319.136610-5-vsementsov@virtuozzo.com>
[eblake: tweak and mention impact on traces, fix errp usage]
Signed-off-by: Eric Blake <eblake@redhat.com>
To be consistent when their _structured_ analogs will be introduced.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171012095319.136610-4-vsementsov@virtuozzo.com>
[eblake: also tweak trace message contents]
Signed-off-by: Eric Blake <eblake@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make the client trace slightly more legible by including the name
of the command being sent.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20170717192635.17880-2-eblake@redhat.com>
The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server whether it intends to
obey block sizes.
When using the block layer as the client, we will obey block
sizes; but when used as 'qemu-nbd -c' to hand off to the
kernel nbd module as the client, we are still waiting for the
kernel to implement a way for us to learn if it will honor
block sizes (perhaps by an addition to sysfs, rather than an
ioctl), as well as any way to tell the kernel what additional
block sizes to obey (NBD_SET_BLKSIZE appears to be accurate
for the minimum size, but preferred and maximum sizes would
probably be new ioctl()s), so until then, we need to make our
request for block sizes conditional.
When using ioctl(NBD_SET_BLKSIZE) to hand off to the kernel,
use the minimum block size as the sector size if it is larger
than 512, which also has the nice effect of cooperating with
(non-qemu) servers that don't do read-modify-write when
exposing a block device with 4k sectors; it might also allow
us to visit a file larger than 2T on a 32-bit kernel.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-10-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server that it intends to
obey block sizes.
Thanks to a recent fix (commit df7b97ff), our real minimum
transfer size is always 1 (the block layer takes care of
read-modify-write on our behalf), but we're still more efficient
if we advertise 512 when the client supports it, as follows:
- OPT_INFO, but no NBD_INFO_BLOCK_SIZE: advertise 512, then
fail with NBD_REP_ERR_BLOCK_SIZE_REQD; client is free to try
something else since we don't disconnect
- OPT_INFO with NBD_INFO_BLOCK_SIZE: advertise 512
- OPT_GO, but no NBD_INFO_BLOCK_SIZE: advertise 1
- OPT_GO with NBD_INFO_BLOCK_SIZE: advertise 512
We can also advertise the optimum block size (presumably the
cluster size, when exporting a qcow2 file), and our absolute
maximum transfer size of 32M, to help newer clients avoid
EINVAL failures or abrupt disconnects on oversize requests.
We do not reject clients for using the older NBD_OPT_EXPORT_NAME;
we are no worse off for those clients than we used to be.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-9-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NBD_OPT_EXPORT_NAME is lousy: per the NBD protocol, any failure
requires the server to close the connection rather than report an
error to us. Therefore, upstream NBD recently added NBD_OPT_GO as
the improved version of the option that does what we want [1]: it
reports sane errors on failures, and on success provides at least
as much info as NBD_OPT_EXPORT_NAME.
[1] https://github.com/NetworkBlockDevice/nbd/blob/extension-info/doc/proto.md
This is a first cut at use of the information types. Note that we
do not need to use NBD_OPT_INFO, and that use of NBD_OPT_GO means
we no longer have to use NBD_OPT_LIST to learn whether a server
requires TLS (this requires servers that gracefully handle unknown
NBD_OPT, many servers prior to qemu 2.5 were buggy, but I have patched
qemu, upstream nbd, and nbdkit in the meantime, in part because of
interoperability testing with this patch). We still fall back to
NBD_OPT_LIST when NBD_OPT_GO is not supported on the server, as it
is still one last chance for a nicer error message. Later patches
will use further info, like NBD_INFO_BLOCK_SIZE.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-8-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NBD_OPT_EXPORT_NAME is lousy: per the NBD protocol, any failure
requires us to close the connection rather than report an error.
Therefore, upstream NBD recently added NBD_OPT_GO as the improved
version of the option that does what we want [1], along with
NBD_OPT_INFO that returns the same information but does not
transition to transmission phase.
[1] https://github.com/NetworkBlockDevice/nbd/blob/extension-info/doc/proto.md
This is a first cut at the information types, and only passes the
same information already available through NBD_OPT_LIST and
NBD_OPT_EXPORT_NAME; items like NBD_INFO_BLOCK_SIZE (and thus any
use of NBD_REP_ERR_BLOCK_SIZE_REQD) are intentionally left for
later patches.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-7-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify the tracing of client flags in the server, and return -EINVAL
instead of -EIO if we successfully read but don't like those flags.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-5-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD protocol has several constants defined in various extensions
that we are about to implement. Expose them to the code, along with
an easy way to map various constants to strings during diagnostic
messages.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-4-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We really don't care if our spec-compliant reply to NBD_OPT_ABORT
was received, so shave off some lines of code by not even tracing it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-3-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let NBD use the trace mechanisms already present in qemu. Now you can
use the -trace optino of qemu, or the -T/--trace option of qemu-img,
qemu-io, and qemu-nbd, to select nbd traces. For qemu, the QMP commands
trace-event-{get,set}-state can also toggle tracing on the fly.
Example:
qemu-nbd --trace 'nbd_*' <image file> # enables all nbd traces
Recompilation with CFLAGS=-DDEBUG_NBD is no more needed, furthermore,
DEBUG_NBD macro is removed from the code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-11-vsementsov@virtuozzo.com>
[eblake: minor tweaks to a couple of traces]
Signed-off-by: Eric Blake <eblake@redhat.com>
