This patch adds code to do minimal siTD handling, which is basically
just following the next pointer. This is good enougth to handle the
inactive siTDs used by FreeBSD. Active siTDs are skipped too as we
don't have split transfer support in qemu, additionally a warning is
printed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
USB Devices can have up to 15 IN and 15 OUT endpoints, not 15 endpoints
total. Move from one array to two arrays (one IN, one OUT) to maintain
the endpoint state.
When configured to pass through a specific host port (using hostbus and
hostport properties), try to claim the port if supported by the kernel.
That will avoid any kernel drivers binding to devices plugged into that
port. It will not stop any userspace apps (such as usb_modeswitch)
access the device via usbfs though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is perfectly fine to leave the usb device in unconfigured state
(USBHostDevice->configuration == 0). Just do that and wait for the
guest to explicitly set a configuration. This is closer to what real
hardware does and it also simplifies the device initialization. There
is no need to figure how the device is configured on the host.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Limit the number of times qemu tries to open host devices to three.
Reset error counter when the device goes away, after un-plugging and
re-plugging the device qemu will try again three times.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Two fixes for the price of one ;)
First, reinitialize the endpoint table after device reset.
This is needed anyway as the reset might have switched interfaces.
It also clears the endpoint halted state.
Second the CLEAR_HALT ioctl wants a unsigned int passed in as
argument, not uint8_t.
This gets my usb sd card reader (sandisk micromate) going.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a bunch of trace points to usb-linux.c Drop a bunch of DPRINTK's in
favor of the trace points. Also cleanup error reporting a bit while being
at it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If qxl->ssd.running=true is set after telling spice to start, the spice server
thread can call qxl_send_events while qxl->ssd.running is still false. This leads to
assert(d->ssd.running).
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
if qxl_send_events was called from spice server context, and then
migration had completed before a call to pipe_read, the target
guest qxl driver didn't get the interrupt. In addition,
qxl_send_events ignored further interrupts of the same kind, since
ram->int_pending was set. As a result, the guest driver was stacked
or very slow (when the waiting for the interrupt was with timeout).
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix format string errors causing compile failure on 32 bit hosts
when spice is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use the correct printf format string character (%z) for ssize_t.
This fixes a compile failure on 32 bit Linux with spice enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- do not return extra pages when requesting all pages (PAGE CODE = 0x3f)
- return correct sense code for PC = 3 (saved parameters not supported)
- do not return geometry pages for CD devices
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even though we do not use them, we should include the last three
bytes of sense data in the additional sense length.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"\/" is supposed to be decoded as "/", but there is no need to encode
"/" via escape. Fix the existing test and add a second one expressing
this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The QDict unit-tests (check-qdict) will fail when ran on a different
build directory. That's, it only works when ran on the source dir.
This happens because its data file (qdict-test-data.txt) is not
copied to the build dir. Fix it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 to distinguish
from the 12-byte CDB variant, and add a constant for the subcommand.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Writes go through scsi_write_complete at least twice, the first time
to get some data without having actually written anything. Because
of this, the first time scsi_write_complete is called it will call
bdrv_acct_done and account a read incorrectly. Fix this by looking
at the aiocb. I am doing the same in scsi_read_complete for symmetry,
but it is only needed in the (bogus) case of bdrv_aio_readv returning
NULL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vSphere 4 exported image is streamOptimized extent, which is not
quite correctly handled. Ignore rdgOffset when RGD flag bit not set.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Haiku provides a specially formed vmdk image, which let qemu abort. It a
combination of sparse header and flat data (i.e. with not l1/l2 table at
all). The fix is turn to descriptor when sparse header is zero in field
'capacity'.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Creating streamOptimized subformat. Added subformat option
'streamOptimized', to create a image with compression enabled and each
cluster with a GrainMarker.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add support for reading/writing compressed extent.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Added flags field for compressed/streamOptimized extents, open and save
image configuration.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Factor out read/write extent code, since there will be more things to
take care of once reading/writing compressed clusters is introduced.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Enable the createType 'twoGbMaxExtentFlat'. The supporting code is
already in.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Device models should be able to use it without an unclean include of
block_int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We try the drive defined with -drive if=ide,index=0 (or equivalent
sugar). We use it only if (dinfo && bdrv_is_inserted(dinfo->bdrv) &&
!bdrv_is_removable(dinfo->bdrv)). This is a convoluted way to test
for "drive media can't be removed".
The only way to create such a drive with -drive if=ide is media=cdrom.
And that sets dinfo->media_cd, so just test that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
pci_piix3_xen_ide_unplug() unplugs only disks, not CD-ROMs. It peeks
into the DriveInfo's BlockDriverState to distinguish between the two.
Unclean; use DriveInfo member media_cd, like xen_config_dev_blk().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
savevm and loadvm silently ignore block devices with removable media,
such as floppies and SD cards. Rolling back a VM to a previous
checkpoint will *not* roll back writes to block devices with removable
media.
Moreover, bdrv_is_removable() is a confused mess, and wrong in at
least one case: it considers "-drive if=xen,media=cdrom -M xenpv"
removable. It'll be cleaned up later in this series.
Read-only block devices are also ignored, but that's okay.
Fix by ignoring only read-only block devices and empty block devices.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change (!bdrv_is_removable(bs) || bdrv_is_inserted(bs)) to just
bdrv_is_inserted(). Rationale:
The value of bdrv_is_removable(bs) matters only when
bdrv_is_inserted(bs) is false.
bdrv_is_inserted(bs) is true when bs is open (bs->drv != NULL) and
not an empty host drive (CD-ROM or floppy).
Therefore, bdrv_is_removable(bs) matters only when:
1. bs is not open
old: may call bdrv_flush(bs), which does nothing
new: won't call
2. bs is an empty host drive
old: may call bdrv_flush(bs), which calls driver method
raw_flush(), which calls fdatasync() or equivalent, which
can't do anything useful while the drive is empty
new: won't call
Result is bs->drv && !bdrv_is_read_only(bs) && bdrv_is_inserted(bs).
bdrv_is_inserted(bs) implies bs->drv. Drop the redundant test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
fdctrl_change_cb() gets called on a virtual media change via monitor.
It would be nice if host device block drivers called it on physical
media change, but they don't.
bdrv_media_changed() lets you poll for media change, but it returns
"don't know" except with block driver "host_floppy".
FDrive member media_changed gets set on device initialization and by
fdctrl_change_cb(), and cleared by fdctrl_media_changed(). Thus, it's
set on first entry to fdctrl_media_changed() since device
initialization or virtual media change.
fdctrl_media_changed() ignores media_changed unless
bdrv_media_changed() returns "don't know". If we change media via
monitor (setting media_changed), and the new media's block driver
returns 0, we lose. Fortunately, "host_floppy" always returns 1 on
first call. Brittle. Clean it up not to rely on it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block driver "raw" forwards most methods to the underlying block
driver. However, it doesn't implement method bdrv_media_changed().
Makes bdrv_media_changed() always return -ENOTSUP.
I believe -fda /dev/fd0 gives you raw over host_floppy, and disk
change detection (fdc register 7 bit 7) is broken. Testing my theory
requires a computer museum, though.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop WIN_SRST, it has the same value as WIN_DEVICE_RESET.
Drop unused WIN_RESTORE, it has the same value as WIN_RECAL.
Drop codes that are not implemented and long obsolete: WIN_READ_LONG,
WIN_READ_LONG_ONCE, WIN_WRITE_LONG, WIN_WRITE_LONG_ONCE, WIN_FORMAT
(all obsolete since ATA4), WIN_ACKMEDIACHANGE, WIN_POSTBOOT,
WIN_PREBOOT (obsolete since ATA3), WIN_WRITE_SAME (obsolete since
ATA3, code reused for something else in ACS2), WIN_IDENTIFY_DMA
(obsolete since ATA4).
Drop codes that are not implemented and vendor-specific:
EXABYTE_ENABLE_NEST, DISABLE_SEAGATE.
Drop WIN_INIT, it isn't implemented, its value used to be reserved,
and is used for something else since ATA8.
CFA_IDLEIMMEDIATE isn't specific to CFATA. ACS-2 shows it as a
defined command in ATA-1, -2 and -3. Rename to WIN_IDLEIMMEDIATE2.
Mark vendor specific, retired, and obsolete codes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Multiplexing callbacks complicates matters needlessly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, this just protects against programming errors like having the
same drive back multiple non-qdev devices, or untimely bdrv_delete().
Later commits will add other interesting uses.
While there, rename BlockDriverState member peer to dev, bdrv_attach()
to bdrv_attach_dev(), bdrv_detach() to bdrv_detach_dev(), and
bdrv_get_attached() to bdrv_get_attached_dev().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu may segfault when a BH handler first deletes a BH and then (possibly
indirectly) calls a nested qemu_bh_poll(). This is because the inner instance
frees the BH and deletes it from the list that the outer one processes.
This patch deletes BHs only in the outermost qemu_bh_poll instance.
Commit 7887f620 already tried to achieve the same, but it assumed that the BH
handler would only delete its own BH. With a nested qemu_bh_poll(), this isn't
guaranteed, so that commit wasn't enough. Hope this one fixes it for real.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Requests depending on a failed request would end up waiting forever. This fixes
the error path to continue dependent requests even when the request has failed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add some notes about Linux AIO explaining why we don't use AIO in
some situations.
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No change to the CPU kinds, so SMP will only work if
manually changing the cpu to 34Kf:
-cpu 34Kf -smp 2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
