Commit Graph

45 Commits

Author SHA1 Message Date
Stefan Hajnoczi ca96ac44dc AioContext: force event loop iteration using BH
The notify_me optimization introduced in commit eabc977973
("AioContext: fix broken ctx->dispatching optimization") skips
event_notifier_set() calls when the event loop thread is not blocked in
ppoll(2).

This optimization causes a deadlock if two aio_context_acquire() calls
race.  notify_me = 0 during the race so the winning thread can enter
ppoll(2) unaware that the other thread is waiting its turn to acquire
the AioContext.

This patch forces ppoll(2) to return by scheduling a BH instead of
calling aio_notify().

The following deadlock with virtio-blk dataplane is fixed:

  qemu ... -object iothread,id=iothread0 \
           -drive if=none,id=drive0,file=test.img,... \
           -device virtio-blk-pci,iothread=iothread0,drive=drive0

This command-line results in a hang early on without this patch.

Thanks to Paolo Bonzini <pbonzini@redhat.com> for investigating this bug
with me.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1438101249-25166-4-git-send-email-pbonzini@redhat.com
Message-Id: <1438014819-18125-3-git-send-email-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-29 10:02:06 +01:00
Stefan Hajnoczi a076972a4d AioContext: avoid leaking BHs on cleanup
BHs are freed during aio_bh_poll().  This leads to memory leaks if there
is no aio_bh_poll() between qemu_bh_delete() and aio_ctx_finalize().

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1438101249-25166-3-git-send-email-pbonzini@redhat.com
Message-Id: <1438014819-18125-2-git-send-email-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-29 10:02:06 +01:00
Paolo Bonzini 05e514b1d4 AioContext: optimize clearing the EventNotifier
It is pretty rare for aio_notify to actually set the EventNotifier.  It
can happen with worker threads such as thread-pool.c's, but otherwise it
should never be set thanks to the ctx->notify_me optimization.  The
previous patch, unfortunately, added an unconditional call to
event_notifier_test_and_clear; now add a userspace fast path that
avoids the call.

Note that it is not possible to do the same with event_notifier_set;
it would break, as proved (again) by the included formal model.

This patch survived over 3000 reboots on aarch64 KVM.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 1437487673-23740-7-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-22 12:41:40 +01:00
Paolo Bonzini 21a03d17f2 AioContext: fix broken placement of event_notifier_test_and_clear
event_notifier_test_and_clear must be called before processing events.
Otherwise, an aio_poll could "eat" the notification before the main
I/O thread invokes ppoll().  The main I/O thread then never wakes up.
This is an example of what could happen:

   i/o thread       vcpu thread                     worker thread
   ---------------------------------------------------------------------
   lock_iothread
   notify_me = 1
   ...
   unlock_iothread
                                                     bh->scheduled = 1
                                                     event_notifier_set
                    lock_iothread
                    notify_me = 3
                    ppoll
                    notify_me = 1
                    aio_dispatch
                     aio_bh_poll
                      thread_pool_completion_bh
                                                     bh->scheduled = 1
                                                     event_notifier_set
                     node->io_read(node->opaque)
                      event_notifier_test_and_clear
   ppoll
   *** hang ***

"Tracing" with qemu_clock_get_ns shows pretty much the same behavior as
in the previous bug, so there are no new tricks here---just stare more
at the code until it is apparent.

One could also use a formal model, of course.  The included one shows
this with three processes: notifier corresponds to a QEMU thread pool
worker, temporary_waiter to a VCPU thread that invokes aio_poll(),
waiter to the main I/O thread.  I would be happy to say that the
formal model found the bug for me, but actually I wrote it after the
fact.

This patch is a bit of a big hammer.  The next one optimizes it,
with help (this time for real rather than a posteriori :)) from
another, similar formal model.

Reported-by: Richard W. M. Jones <rjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 1437487673-23740-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-22 12:41:40 +01:00
Paolo Bonzini eabc977973 AioContext: fix broken ctx->dispatching optimization
This patch rewrites the ctx->dispatching optimization, which was the cause
of some mysterious hangs that could be reproduced on aarch64 KVM only.
The hangs were indirectly caused by aio_poll() and in particular by
flash memory updates's call to blk_write(), which invokes aio_poll().
Fun stuff: they had an extremely short race window, so much that
adding all kind of tracing to either the kernel or QEMU made it
go away (a single printf made it half as reproducible).

On the plus side, the failure mode (a hang until the next keypress)
made it very easy to examine the state of the process with a debugger.
And there was a very nice reproducer from Laszlo, which failed pretty
often (more than half of the time) on any version of QEMU with a non-debug
kernel; it also failed fast, while still in the firmware.  So, it could
have been worse.

For some unknown reason they happened only with virtio-scsi, but
that's not important.  It's more interesting that they disappeared with
io=native, making thread-pool.c a likely suspect for where the bug arose.
thread-pool.c is also one of the few places which use bottom halves
across threads, by the way.

I hope that no other similar bugs exist, but just in case :) I am
going to describe how the successful debugging went...  Since the
likely culprit was the ctx->dispatching optimization, which mostly
affects bottom halves, the first observation was that there are two
qemu_bh_schedule() invocations in the thread pool: the one in the aio
worker and the one in thread_pool_completion_bh.  The latter always
causes the optimization to trigger, the former may or may not.  In
order to restrict the possibilities, I introduced new functions
qemu_bh_schedule_slow() and qemu_bh_schedule_fast():

     /* qemu_bh_schedule_slow: */
     ctx = bh->ctx;
     bh->idle = 0;
     if (atomic_xchg(&bh->scheduled, 1) == 0) {
         event_notifier_set(&ctx->notifier);
     }

     /* qemu_bh_schedule_fast: */
     ctx = bh->ctx;
     bh->idle = 0;
     assert(ctx->dispatching);
     atomic_xchg(&bh->scheduled, 1);

Notice how the atomic_xchg is still in qemu_bh_schedule_slow().  This
was already debated a few months ago, so I assumed it to be correct.
In retrospect this was a very good idea, as you'll see later.

Changing thread_pool_completion_bh() to qemu_bh_schedule_fast() didn't
trigger the assertion (as expected).  Changing the worker's invocation
to qemu_bh_schedule_slow() didn't hide the bug (another assumption
which luckily held).  This already limited heavily the amount of
interaction between the threads, hinting that the problematic events
must have triggered around thread_pool_completion_bh().

As mentioned early, invoking a debugger to examine the state of a
hung process was pretty easy; the iothread was always waiting on a
poll(..., -1) system call.  Infinite timeouts are much rarer on x86,
and this could be the reason why the bug was never observed there.
With the buggy sequence more or less resolved to an interaction between
thread_pool_completion_bh() and poll(..., -1), my "tracing" strategy was
to just add a few qemu_clock_get_ns(QEMU_CLOCK_REALTIME) calls, hoping
that the ordering of aio_ctx_prepare(), aio_ctx_dispatch, poll() and
qemu_bh_schedule_fast() would provide some hint.  The output was:

    (gdb) p last_prepare
    $3 = 103885451
    (gdb) p last_dispatch
    $4 = 103876492
    (gdb) p last_poll
    $5 = 115909333
    (gdb) p last_schedule
    $6 = 115925212

Notice how the last call to qemu_poll_ns() came after aio_ctx_dispatch().
This makes little sense unless there is an aio_poll() call involved,
and indeed with a slightly different instrumentation you can see that
there is one:

    (gdb) p last_prepare
    $3 = 107569679
    (gdb) p last_dispatch
    $4 = 107561600
    (gdb) p last_aio_poll
    $5 = 110671400
    (gdb) p last_schedule
    $6 = 110698917

So the scenario becomes clearer:

   iothread                   VCPU thread
--------------------------------------------------------------------------
   aio_ctx_prepare
   aio_ctx_check
   qemu_poll_ns(timeout=-1)
                              aio_poll
                                aio_dispatch
                                  thread_pool_completion_bh
                                    qemu_bh_schedule()

At this point bh->scheduled = 1 and the iothread has not been woken up.
The solution must be close, but this alone should not be a problem,
because the bottom half is only rescheduled to account for rare situations
(see commit 3c80ca1, thread-pool: avoid deadlock in nested aio_poll()
calls, 2014-07-15).

Introducing a third thread---a thread pool worker thread, which
also does qemu_bh_schedule()---does bring out the problematic case.
The third thread must be awakened *after* the callback is complete and
thread_pool_completion_bh has redone the whole loop, explaining the
short race window.  And then this is what happens:

                                                      thread pool worker
--------------------------------------------------------------------------
                                                      <I/O completes>
                                                      qemu_bh_schedule()

Tada, bh->scheduled is already 1, so qemu_bh_schedule() does nothing
and the iothread is never woken up.  This is where the bh->scheduled
optimization comes into play---it is correct, but removing it would
have masked the bug.

So, what is the bug?

Well, the question asked by the ctx->dispatching optimization ("is any
active aio_poll dispatching?") was wrong.  The right question to ask
instead is "is any active aio_poll *not* dispatching", i.e. in the prepare
or poll phases?  In that case, the aio_poll is sleeping or might go to
sleep anytime soon, and the EventNotifier must be invoked to wake
it up.

In any other case (including if there is *no* active aio_poll at all!)
we can just wait for the next prepare phase to pick up the event (e.g. a
bottom half); the prepare phase will avoid the blocking and service the
bottom half.

Expressing the invariant with a logic formula, the broken one looked like:

   !(exists(thread): in_dispatching(thread)) => !optimize

or equivalently:

   !(exists(thread):
          in_aio_poll(thread) && in_dispatching(thread)) => !optimize

In the correct one, the negation is in a slightly different place:

   (exists(thread):
         in_aio_poll(thread) && !in_dispatching(thread)) => !optimize

or equivalently:

   (exists(thread): in_prepare_or_poll(thread)) => !optimize

Even if the difference boils down to moving an exclamation mark :)
the implementation is quite different.  However, I think the new
one is simpler to understand.

In the old implementation, the "exists" was implemented with a boolean
value.  This didn't really support well the case of multiple concurrent
event loops, but I thought that this was okay: aio_poll holds the
AioContext lock so there cannot be concurrent aio_poll invocations, and
I was just considering nested event loops.  However, aio_poll _could_
indeed be concurrent with the GSource.  This is why I came up with the
wrong invariant.

In the new implementation, "exists" is computed simply by counting how many
threads are in the prepare or poll phases.  There are some interesting
points to consider, but the gist of the idea remains:

1) AioContext can be used through GSource as well; as mentioned in the
patch, bit 0 of the counter is reserved for the GSource.

2) the counter need not be updated for a non-blocking aio_poll, because
it won't sleep forever anyway.  This is just a matter of checking
the "blocking" variable.  This requires some changes to the win32
implementation, but is otherwise not too complicated.

3) as mentioned above, the new implementation will not call aio_notify
when there is *no* active aio_poll at all.  The tests have to be
adjusted for this change.  The calls to aio_notify in async.c are fine;
they only want to kick aio_poll out of a blocking wait, but need not
do anything if aio_poll is not running.

4) nested aio_poll: these just work with the new implementation; when
a nested event loop is invoked, the outer event loop is never in the
prepare or poll phases.  The outer event loop thus has already decremented
the counter.

Reported-by: Richard W. M. Jones <rjones@redhat.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 1437487673-23740-5-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-22 12:41:40 +01:00
Stefan Hajnoczi da5e1de95b Revert "iothread: release iothread around aio_poll"
This reverts commit a0710f7995.

In qemu-devel email message <556DBF87.2020908@de.ibm.com>, Christian
Borntraeger writes:

  Having many guests all with a kernel/ramdisk (via -kernel) and
  several null block devices will result in hangs. All hanging
  guests are in partition detection code waiting for an I/O to return
  so very early maybe even the first I/O.

  Reverting that commit "fixes" the hangs.

Reverting this commit for the 2.4 release.  More time is needed to
investigate and correct this patch.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:58:33 +01:00
Paolo Bonzini a0710f7995 iothread: release iothread around aio_poll
This is the first step towards having fine-grained critical sections in
dataplane threads, which resolves lock ordering problems between
address_space_* functions (which need the BQL when doing MMIO, even
after we complete RCU-based dispatch) and the AioContext.

Because AioContext does not use contention callbacks anymore, the
unit test has to be changed.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424449612-18215-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28 15:36:08 +02:00
Paolo Bonzini e98ab09709 aio-posix: move pollfds to thread-local storage
By using thread-local storage, aio_poll can stop using global data during
g_poll_ns.  This will make it possible to drop callbacks from rfifolock.

[Moved npfd = 0 assignment to end of walking_handlers region as
suggested by Paolo.  This resolves the assert(npfd == 0) assertion
failure in pollfds_cleanup().
--Stefan]

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424449612-18215-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28 15:36:08 +02:00
Paolo Bonzini e8d3b1a25f aio: strengthen memory barriers for bottom half scheduling
There are two problems with memory barriers in async.c.  The fix is
to use atomic_xchg in order to achieve sequential consistency between
the scheduling of a bottom half and the corresponding execution.

First, if bh->scheduled is already 1 in qemu_bh_schedule, QEMU does
not execute a memory barrier to order any writes needed by the callback
before the read of bh->scheduled.  If the other side sees req->state as
THREAD_ACTIVE, the callback is not invoked and you get deadlock.

Second, the memory barrier in aio_bh_poll is too weak.  Without this
patch, it is possible that bh->scheduled = 0 is not "published" until
after the callback has returned.  Another thread wants to schedule the
bottom half, but it sees bh->scheduled = 1 and does nothing.  This causes
a lost wakeup.  The memory barrier should have been changed to smp_mb()
in commit 924fe12 (aio: fix qemu_bh_schedule() bh->ctx race condition,
2014-06-03) together with qemu_bh_schedule()'s.  Guess who reviewed
that patch?

Both of these involve a store and a load, so they are reproducible on
x86_64 as well.  It is however much easier on aarch64, where the
libguestfs test suite triggers the bug fairly easily.  Even there the
failure can go away or appear depending on compiler optimization level,
tracing options, or even kernel debugging options.

Paul Leveille however reported how to trigger the problem within 15
minutes on x86_64 as well.  His (untested) recipe, reproduced here
for reference, is the following:

   1) Qcow2 (or 3) is critical – raw files alone seem to avoid the problem.

   2) Use “cache=directsync” rather than the default of
   “cache=none” to make it happen easier.

   3) Use a server with a write-back RAID controller to allow for rapid
   IO rates.

   4) Run a random-access load that (mostly) writes chunks to various
   files on the virtual block device.

      a. I use ‘diskload.exe c:25’, a Microsoft HCT load
         generator, on Windows VMs.

      b. Iometer can probably be configured to generate a similar load.

   5) Run multiple VMs in parallel, against the same storage device,
   to shake the failure out sooner.

   6) IvyBridge and Haswell processors for certain; not sure about others.

A similar patch survived over 12 hours of testing, where an unpatched
QEMU would fail within 15 minutes.

This bug is, most likely, also the cause of failures in the libguestfs
testsuite on AArch64.

Thanks to Laszlo Ersek for initially reporting this bug, to Stefan
Hajnoczi for suggesting closer examination of qemu_bh_schedule, and to
Paul for providing test input and a prototype patch.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Reported-by: Paul Leveille <Paul.Leveille@stratus.com>
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1428419779-26062-1-git-send-email-pbonzini@redhat.com
Suggested-by: Paul Leveille <Paul.Leveille@stratus.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-04-09 10:29:29 +01:00
Paolo Bonzini ee82310f8a block: replace g_new0 with g_new for bottom half allocation.
This saves about 15% of the clock cycles spent on allocation.  Using the
slice allocator does not add a visible improvement; allocation is faster
than malloc, while freeing seems to be slower.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-13 11:47:56 +00:00
Paolo Bonzini fcf5def1ab block: mark AioContext as recursive
AioContext can be accessed recursively, in fact that's what we do with
aio_poll.  Marking the GSource as recursive avoids that GLib blocks it
and unblocks it around every call to aio_dispatch, which is a pretty
expensive operation.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-13 11:47:55 +00:00
Markus Armbruster 3ba235a022 block: Use g_new0() for a bit of extra type checking
g_new(T, 1) is safer than g_malloc(sizeof(T)), because it returns T *
rather than void *, which lets the compiler catch more type errors.

Missed in commit 02c4f26.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1417697709-13087-1-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10 10:31:21 +01:00
Chrysostomos Nanakos 2f78e491d7 async: aio_context_new(): Handle event_notifier_init failure
On a system with a low limit of open files the initialization
of the event notifier could fail and QEMU exits without printing any
error information to the user.

The problem can be easily reproduced by enforcing a low limit of open
files and start QEMU with enough I/O threads to hit this limit.

The same problem raises, without the creation of I/O threads, while
QEMU initializes the main event loop by enforcing an even lower limit of
open files.

This commit adds an error message on failure:

 # qemu [...] -object iothread,id=iothread0 -object iothread,id=iothread1
 qemu: Failed to initialize event notifier: Too many open files in system

Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:39:48 +01:00
Paolo Bonzini a3462c6561 AioContext: introduce aio_prepare
This will be used to implement socket polling on Windows.
On Windows, select() and g_poll() are completely different;
sockets are polled with select() before calling g_poll,
and the g_poll must be nonblocking if select() says a
socket is ready.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-29 10:46:58 +01:00
Paolo Bonzini e4c7e2d12d AioContext: export and use aio_dispatch
So far, aio_poll's scheme was dispatch/poll/dispatch, where
the first dispatch phase was used only in the GSource case in
order to avoid a blocking poll.  Earlier patches changed it to
dispatch/prepare/poll/dispatch, where prepare is aio_compute_timeout.

By making aio_dispatch public, we can remove the first dispatch
phase altogether, so that both aio_poll and the GSource use the same
prepare/poll/dispatch scheme.

This patch breaks the invariant that aio_poll(..., true) will not block
the first time it returns false.  This used to be fundamental for
qemu_aio_flush's implementation as "while (qemu_aio_wait()) {}" but
no code in QEMU relies on this invariant anymore.  The return value
of aio_poll() is now comparable with that of g_main_context_iteration.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-29 10:46:58 +01:00
Paolo Bonzini 845ca10dd0 AioContext: take bottom halves into account when computing aio_poll timeout
Right now, QEMU invokes aio_bh_poll before the "poll" phase
of aio_poll.  It is simpler to do it afterwards and skip the
"poll" phase altogether when the OS-dependent parts of AioContext
are invoked from GSource.  This way, AioContext behaves more
similarly when used as a GSource vs. when used as stand-alone.

As a start, take bottom halves into account when computing the
poll timeout.  If a bottom half is ready, do a non-blocking
poll.  As a side effect, this makes idle bottom halves work
with aio_poll; an improvement, but not really an important
one since they are deprecated.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-29 10:46:58 +01:00
Paolo Bonzini 0ceb849bd3 AioContext: speed up aio_notify
In many cases, the call to event_notifier_set in aio_notify is unnecessary.
In particular, if we are executing aio_dispatch, or if aio_poll is not
blocking, we know that we will soon get to the next loop iteration (if
necessary); the thread that hosts the AioContext's event loop does not
need any nudging.

The patch includes a Promela formal model that shows that this really
works and does not need any further complication such as generation
counts.  It needs a memory barrier though.

The generation counts are not needed because any change to
ctx->dispatching after the memory barrier is okay for aio_notify.
If it changes from zero to one, it is the right thing to skip
event_notifier_set.  If it changes from one to zero, the
event_notifier_set is unnecessary but harmless.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-09 15:50:11 +02:00
Stefan Hajnoczi 924fe1293c aio: fix qemu_bh_schedule() bh->ctx race condition
qemu_bh_schedule() is supposed to be thread-safe at least the first time
it is called.  Unfortunately this is not quite true:

  bh->scheduled = 1;
  aio_notify(bh->ctx);

Since another thread may run the BH callback once it has been scheduled,
there is a race condition if the callback frees the BH before
aio_notify(bh->ctx) has a chance to run.

Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Stefan Priebe <s.priebe@profihost.ag>
2014-06-04 09:56:06 +02:00
Stefan Hajnoczi 98563fc3ec aio: add aio_context_acquire() and aio_context_release()
It can be useful to run an AioContext from a thread which normally does
not "own" the AioContext.  For example, request draining can be
implemented by acquiring the AioContext and looping aio_poll() until all
requests have been completed.

The following pattern should work:

  /* Event loop thread */
  while (running) {
      aio_context_acquire(ctx);
      aio_poll(ctx, true);
      aio_context_release(ctx);
  }

  /* Another thread */
  aio_context_acquire(ctx);
  bdrv_read(bs, 0x1000, buf, 1);
  aio_context_release(ctx);

This patch implements aio_context_acquire() and aio_context_release().

Note that existing aio_poll() callers do not need to worry about
acquiring and releasing - it is only needed when multiple threads will
call aio_poll() on the same AioContext.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-13 14:42:24 +01:00
Alex Bligh 533a8cf350 aio / timers: aio_ctx_prepare sets timeout from AioContext timers
Calculate the timeout in aio_ctx_prepare taking into account
the timers attached to the AioContext.

Alter aio_ctx_check similarly.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:28 +02:00
Alex Bligh d5541d8680 aio / timers: Add a notify callback to QEMUTimerList
Add a notify pointer to QEMUTimerList so it knows what to notify
on a timer change.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:28 +02:00
Alex Bligh dae21b98b9 aio / timers: Add QEMUTimerListGroup to AioContext
Add a QEMUTimerListGroup each AioContext (meaning a QEMUTimerList
associated with each clock is added) and delete it when the
AioContext is freed.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:27 +02:00
Stefan Hajnoczi f2e5dca46b aio: drop io_flush argument
The .io_flush() handler no longer exists and has no users.  Drop the
io_flush argument to aio_set_fd_handler() and related functions.

The AioFlushEventNotifierHandler and AioFlushHandler typedefs are no
longer used and are dropped too.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-19 15:52:19 +02:00
Liu Ping Fan dcc772e2f2 QEMUBH: make AioContext's bh re-entrant
BH will be used outside big lock, so introduce lock to protect
between the writers, ie, bh's adders and deleter. The lock only
affects the writers and bh's callback does not take this extra lock.
Note that for the same AioContext, aio_bh_poll() can not run in
parallel yet.

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19 12:29:21 +08:00
Stefan Hajnoczi 9b34277d23 aio: add a ThreadPool instance to AioContext
This patch adds a ThreadPool to AioContext.  It's possible that some
AioContext instances will never use the ThreadPool, so defer creation
until aio_get_thread_pool().

The reason why AioContext should have the ThreadPool is because the
ThreadPool is bound to a AioContext instance where the work item's
callback function is invoked.  It doesn't make sense to keep the
ThreadPool pointer anywhere other than AioContext.  For example,
block/raw-posix.c can get its AioContext's ThreadPool and submit work.

Special note about headers: I used struct ThreadPool in aio.h because
there is a circular dependency if aio.h includes thread-pool.h.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-15 16:07:50 +01:00
Stefan Hajnoczi 6b5f876252 aio: convert aio_poll() to g_poll(3)
AioHandler already has a GPollFD so we can directly use its
events/revents.

Add the int pollfds_idx field to AioContext so we can map g_poll(3)
results back to AioHandlers.

Reuse aio_dispatch() to invoke handlers after g_poll(3).

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-10-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21 16:17:31 -06:00
Paolo Bonzini 1de7afc984 misc: move include files to include/qemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:39 +01:00
Paolo Bonzini 737e150e89 block: move include files to include/block/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:31 +01:00
Kevin Wolf c57b6656c3 aio: Get rid of qemu_aio_flush()
There are no remaining users, and new users should probably be
using bdrv_drain_all() in the first place.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-12-11 11:04:25 +01:00
Paolo Bonzini f5022a135e aio: fix aio_ctx_prepare with idle bottom halves
Commit ed2aec4867f0d5f5de496bb765347b5d0cfe113d changed the return
value of aio_ctx_prepare from false to true when only idle bottom
halves are available.  This broke PC old-style DMA, which uses them.
Fix this by making aio_ctx_prepare return true only when non-idle
bottom halves are scheduled to run.

Reported-by: malc <av1474@comtv.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2012-11-12 20:02:09 +04:00
Paolo Bonzini 22bfa75eaf aio: clean up now-unused functions
Some cleanups can now be made, now that the main loop does not anymore need
hooks into the bottom half code.

Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30 09:30:54 +01:00
Paolo Bonzini 2f4dc3c1b2 aio: add aio_notify
With this change async.c does not rely anymore on any service from
main-loop.c, i.e. it is completely self-contained.

Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30 09:30:53 +01:00
Paolo Bonzini e3713e001f aio: make AioContexts GSources
This lets AioContexts be used (optionally) with a glib main loop.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30 09:30:53 +01:00
Paolo Bonzini 7c0628b20e aio: add non-blocking variant of aio_wait
This will be used when polling the GSource attached to an AioContext.

Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30 09:30:53 +01:00
Paolo Bonzini a915f4bc97 aio: add I/O handlers to the AioContext interface
With this patch, I/O handlers (including event notifier handlers) can be
attached to a single AioContext.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30 09:30:53 +01:00
Paolo Bonzini f627aab1cc aio: introduce AioContext, move bottom halves there
Start introducing AioContext, which will let us remove globals from
aio.c/async.c, and introduce multiple I/O threads.

The bottom half functions now take an additional AioContext argument.
A bottom half is created with a specific AioContext that remains the
same throughout the lifetime.  qemu_bh_new is just a wrapper that
uses a global context.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30 09:30:53 +01:00
Stefan Weil 9b47b17e80 async: Use bool for boolean struct members and remove a hole
Using bool reduces the size of the structure and improves readability.
A hole in the structure was removed.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-05-01 10:13:25 +01:00
Stefano Stabellini 7c7db75576 main_loop_wait: block indefinitely
- remove qemu_calculate_timeout;

- explicitly size timeout to uint32_t;

- introduce slirp_update_timeout;

- pass NULL as timeout argument to select in case timeout is the maximum
value;

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-26 13:14:58 -05:00
Paolo Bonzini 44a9b356ad main-loop: create main-loop.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-10-21 18:14:30 +02:00
Kevin Wolf 648fb0ea5e async: Allow nested qemu_bh_poll calls
qemu may segfault when a BH handler first deletes a BH and then (possibly
indirectly) calls a nested qemu_bh_poll(). This is because the inner instance
frees the BH and deletes it from the list that the outer one processes.

This patch deletes BHs only in the outermost qemu_bh_poll instance.

Commit 7887f620 already tried to achieve the same, but it assumed that the BH
handler would only delete its own BH. With a nested qemu_bh_poll(), this isn't
guaranteed, so that commit wasn't enough. Hope this one fixes it for real.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06 11:23:51 +02:00
Anthony Liguori 7267c0947d Use glib memory allocation and free functions
qemu_malloc/qemu_free no longer exist after this commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20 23:01:08 -05:00
Kevin Wolf 384acbf46b async: Remove AsyncContext
The purpose of AsyncContexts was to protect qcow and qcow2 against reentrancy
during an emulated bdrv_read/write (which includes a qemu_aio_wait() call and
can run AIO callbacks of different requests if it weren't for AsyncContexts).

Now both qcow and qcow2 are protected by CoMutexes and AsyncContexts can be
removed.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-02 15:53:41 +02:00
Kevin Wolf 7887f6201f Allow nested qemu_bh_poll() after BH deletion
Without this, qemu segfaults when a BH handler first deletes its BH and
then calls another function which involves a nested qemu_bh_poll() call.

This can be reproduced by generating an I/O error (e.g. with blkdebug) on
an IDE device and using rerror/werror=stop to stop the VM. When continuing
the VM, qemu segfaults.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-15 15:43:20 +02:00
Kevin Wolf 9a1e948129 Introduce contexts for asynchronous callbacks
Add the possibility to use AIO and BHs without allowing foreign callbacks to be
run. Basically, you put your own AIOs and BHs in a separate context. For
details see the comments in the source.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:59 -05:00
Kevin Wolf 4f999d05f5 Split out bottom halves
Instead of putting more and more stuff into vl.c, let's have the generic
functions that deal with asynchronous callbacks in their own file.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:59 -05:00