Commit Graph

23786 Commits

Author SHA1 Message Date
Stefan Hajnoczi
ef4929fb3c dataplane: use linux-headers/ for virtio includes
The hw/dataplane/vring.c code includes linux/virtio_ring.h.  Ensure that
we use linux-headers/ instead of the system-wide headers, which may be
out-of-date on older distros.

This resolves the following build error on Debian 6:

  CC    hw/dataplane/vring.o
cc1: warnings being treated as errors
hw/dataplane/vring.c: In function 'vring_enable_notification':
hw/dataplane/vring.c:71: error: implicit declaration of function 'vring_avail_event'
hw/dataplane/vring.c:71: error: nested extern declaration of 'vring_avail_event'
hw/dataplane/vring.c:71: error: lvalue required as left operand of assignment

Note that we now build dataplane/ for each target instead of only once.
There is no way around this since linux-headers/ is only available for
per-target objects - and it's how virtio, vfio, kvm, and friends are
built.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-03 07:13:25 -06:00
Stefan Weil
dbd99ae302 configure: Write new file "config-all-disas.mak" when running configure
Incremental builds added new lines to that file each time when configure
was run.

Now a new file with a comment line is written.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02 13:33:21 -06:00
Stefan Weil
5034833360 tci: Fix broken builds with TCG interpreter
TCI no longer compiled after commit 76cad71136.

The TCI disassembler depends on data structures which are different for
each QEMU target, so it cannot be compiled as a universal-obj today.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02 13:33:05 -06:00
Michael Tokarev
74e91370be savevm.c: cleanup system includes
savevm.c suffers from the same problem as some other files.
Some years ago savevm.c was created from vl.c, moving some
code from there into a separate file.  At that time, all
includes were just copied from vl.c to savevm.c, without
checking which ones are needed and which are not.

But actually most of that stuff is _not_ needed.  More, some
stuff is wrong, for example, *BSD #ifdef'ery around <util.h>
vs <libutil.h> - for one, it fails to build on Debian/kFreebsd.

Just remove all this.  Maybe there's a possibility to clean
it up further - like removing <windows.h> (and maybe including
winsock.h for htons etc), and maybe it's possible to remove
some internal #includes too, but I didn't check this.

While at it, remove duplicate #include of qemu/timer.h.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02 13:32:48 -06:00
Michael Tokarev
ab51b1d568 disallow -daemonize usage of stdio (curses display, -nographic, -serial stdio etc)
Curses display requires stdin/out to stay on the terminal,
so -daemonize makes no sense in this case.  Instead of
leaving display uninitialized like is done since 995ee2bf46,
explicitly detect this case earlier and error out.

-nographic can actually be used with -daemonize, by redirecting
everything to a null device, but the problem is that according
to documentation and historical behavour, -nographic redirects
guest ports to stdin/out, which, again, makes no sense in case
of -daemonize.  Since -nographic is a legacy option, don't bother
fixing this case (to allow -nographic and -daemonize by redirecting
guest ports to null instead of stdin/out in this case), but disallow
it completely instead, to stop garbling host terminal.

If no display display needed and user wants to use -nographic,
the right way to go is to use
  -serial null -parallel null -monitor none -display none -vga none
instead of -nographic.

Also prevent the same issue -- it was possible to get garbled
host tty after

  -nographic -daemonize

and it is still possible to have it by using

  -serial stdio -daemonize

Fix this by disallowing opening stdio chardev when -daemonize
is specified.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02 13:32:41 -06:00
Anthony Liguori
217da7fdeb Merge remote-tracking branch 'stefanha/block' into staging
* stefanha/block:
  sheepdog: pass oid directly to send_pending_req()
  sheepdog: don't update inode when create_and_write fails
  block/raw-win32: Fix compiler warnings (wrong format specifiers)
  qemu-img: report size overflow error message
  cutils: change strtosz_suffix_unit function
  virtio-blk: Return UNSUPP for unknown request types
  virtio-blk: add x-data-plane=on|off performance feature
  dataplane: add virtio-blk data plane code
  virtio-blk: restore VirtIOBlkConf->config_wce flag
  iov: add qemu_iovec_concat_iov()
  test-iov: add iov_discard_front/back() testcases
  iov: add iov_discard_front/back() to remove data
  dataplane: add Linux AIO request queue
  dataplane: add event loop
  dataplane: add virtqueue vring code
  dataplane: add host memory mapping code
  configure: add CONFIG_VIRTIO_BLK_DATA_PLANE
  raw-posix: add raw_get_aio_fd() for virtio-blk-data-plane

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02 12:19:27 -06:00
Stefan Weil
9a8a5ae69d tcg: Remove unneeded assertion
Commit 7f6f0ae5b9 added two assertions.

One of these assertions is not needed:
The pointer ts is never NULL because it is initialized with the
address of an array element.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02 11:23:21 -06:00
Liu Yuan
d6b1ef89a1 sheepdog: pass oid directly to send_pending_req()
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 16:09:00 +01:00
Liu Yuan
bd751f2204 sheepdog: don't update inode when create_and_write fails
For the error case such as SD_RES_NO_SPACE, we shouldn't update the inode bitmap
to avoid the scenario that the object is allocated but wasn't created at the
server side. This will result in VM's IO error on the failed object.

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 16:08:58 +01:00
Stefan Weil
fccedc624c block/raw-win32: Fix compiler warnings (wrong format specifiers)
Commit fbcad04d6b added fprintf statements
with wrong format specifiers.

GetLastError() returns a DWORD which is unsigned long, so %lu must be used.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 16:08:57 +01:00
liguang
7944339726 qemu-img: report size overflow error message
qemu-img will complain when qcow or qcow2
size overflow for 64 bits, report the right
message in this condition.

$./qemu-img create -f qcow2 /tmp/foo 0x10000000000000000
before change:
qemu-img: Invalid image size specified! You may use k, M, G or T suffixes for
qemu-img: kilobytes, megabytes, gigabytes and terabytes.

after change:
qemu-img: Image size must be less than 8 EiB!

[Resolved conflict with a9300911 goto removal -- Stefan]

Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 16:08:56 +01:00
liguang
37edbf7ea8 cutils: change strtosz_suffix_unit function
if value to be translated is larger than INT64_MAX,
this function will not be convenient for caller to
be aware of it, so change a little for this.

Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 16:08:54 +01:00
Alexey Zaytsev
9e72c45033 virtio-blk: Return UNSUPP for unknown request types
Currently, all unknown requests are treated as VIRTIO_BLK_T_IN

Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 16:08:53 +01:00
Stefan Hajnoczi
392808b49b virtio-blk: add x-data-plane=on|off performance feature
The virtio-blk-data-plane feature is easy to integrate into
hw/virtio-blk.c.  The data plane can be started and stopped similar to
vhost-net.

Users can take advantage of the virtio-blk-data-plane feature using the
new -device virtio-blk-pci,x-data-plane=on property.

The x-data-plane name was chosen because at this stage the feature is
experimental and likely to see changes in the future.

If the VM configuration does not support virtio-blk-data-plane an error
message is printed.  Although we could fall back to regular virtio-blk,
I prefer the explicit approach since it prompts the user to fix their
configuration if they want the performance benefit of
virtio-blk-data-plane.

Limitations:
 * Only format=raw is supported
 * Live migration is not supported
 * Block jobs, hot unplug, and other operations fail with -EBUSY
 * I/O throttling limits are ignored
 * Only Linux hosts are supported due to Linux AIO usage

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 16:08:51 +01:00
Stefan Hajnoczi
e72f66a0a2 dataplane: add virtio-blk data plane code
virtio-blk-data-plane is a subset implementation of virtio-blk.  It only
handles read, write, and flush requests.  It does this using a dedicated
thread that executes an epoll(2)-based event loop and processes I/O
using Linux AIO.

This approach performs very well but can be used for raw image files
only.  The number of IOPS achieved has been reported to be several times
higher than the existing virtio-blk implementation.

Eventually it should be possible to unify virtio-blk-data-plane with the
main body of QEMU code once the block layer and hardware emulation is
able to run outside the global mutex.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 16:08:47 +01:00
Stefan Hajnoczi
8a873ba780 virtio-blk: restore VirtIOBlkConf->config_wce flag
Two slightly different versions of a patch to conditionally set
VIRTIO_BLK_F_CONFIG_WCE through the "config-wce" qdev property have been
applied (ea776abca and eec7f96c2).  David Gibson
<david@gibson.dropbear.id.au> noticed that the "config-wce"
property is broken as a result and fixed it recently.

The fix sets the host_features VIRTIO_BLK_F_CONFIG_WCE bit from a qdev
property.  Unfortunately, the virtio device then has no chance to test
for the presence of the feature bit during virtio_blk_init().

Therefore, reinstate the VirtIOBlkConf->config_wce flag.  Drop the
duplicate qdev property to set the host_features bit.  The
VirtIOBlkConf->config_wce flag will be used by virtio-blk-data-plane in
a later patch.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:59:20 +01:00
Stefan Hajnoczi
530c0bbd73 iov: add qemu_iovec_concat_iov()
The qemu_iovec_concat() function copies a subset of a QEMUIOVector.  The
new qemu_iovec_concat_iov() function does the same for a iov/cnt pair.

It is easy to define qemu_iovec_concat() in terms of
qemu_iovec_concat_iov().  The existing code is mostly unchanged, except
for the assertion src->size >= soffset, which cannot be efficiently
checked upfront on a iov/cnt pair.  Instead we assert upon hitting the
end of src with an unsatisfied soffset.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:58:09 +01:00
Stefan Hajnoczi
8962e44fe4 test-iov: add iov_discard_front/back() testcases
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:58:09 +01:00
Stefan Hajnoczi
d02776350d iov: add iov_discard_front/back() to remove data
The iov_discard_front/back() functions remove data from the front or
back of the vector.  This is useful when peeling off header/footer
structs.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:58:05 +01:00
Stefan Hajnoczi
3e9ec52171 dataplane: add Linux AIO request queue
The IOQueue has a pool of iocb structs and a function to add new
read/write requests.  Multiple requests can be added before calling the
submit function to actually tell the host kernel to begin I/O.  This
allows callers to batch requests and submit them in one go.

The actual I/O is performed using Linux AIO.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:58:03 +01:00
Stefan Hajnoczi
71973b0461 dataplane: add event loop
Outside the safety of the global mutex we need to poll on file
descriptors.  I found epoll(2) is a convenient way to do that, although
other options could replace this module in the future (such as an
AioContext-based loop or glib's GMainLoop).

One important feature of this small event loop implementation is that
the loop can be terminated in a thread-safe way.  This allows QEMU to
stop the data plane thread cleanly.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:56:21 +01:00
Stefan Hajnoczi
88807f89d9 dataplane: add virtqueue vring code
The virtio-blk-data-plane cannot access memory using the usual QEMU
functions since it executes outside the global mutex and the memory APIs
are this time are not thread-safe.

This patch introduces a virtqueue module based on the kernel's vhost
vring code.  The trick is that we map guest memory ahead of time and
access it cheaply outside the global mutex.

Once the hardware emulation code can execute outside the global mutex it
will be possible to drop this code.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:55:47 +01:00
Stefan Hajnoczi
185ecf40e3 dataplane: add host memory mapping code
The data plane thread needs to map guest physical addresses to host
pointers.  Normally this is done with cpu_physical_memory_map() but the
function assumes the global mutex is held.  The data plane thread does
not touch the global mutex and therefore needs a thread-safe memory
mapping mechanism.

Hostmem registers a MemoryListener similar to how vhost collects and
pushes memory region information into the kernel.  There is a
fine-grained lock on the regions list which is held during lookup and
when installing a new regions list.

When the physical memory map changes the MemoryListener callbacks are
invoked.  They build up a new list of memory regions which is finally
installed when the list has been completed.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:50:32 +01:00
Stefan Hajnoczi
583f6e7bbd configure: add CONFIG_VIRTIO_BLK_DATA_PLANE
The virtio-blk-data-plane feature only works with Linux AIO.  Therefore
add a ./configure option and necessary checks to implement this
dependency.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:31:39 +01:00
Stefan Hajnoczi
4065742ac0 raw-posix: add raw_get_aio_fd() for virtio-blk-data-plane
The raw_get_aio_fd() function allows virtio-blk-data-plane to get the
file descriptor of a raw image file with Linux AIO enabled.  This
interface is really a layering violation that can be resolved once the
block layer is able to run outside the global mutex - at that point
virtio-blk-data-plane will switch from custom Linux AIO code to using
the block layer.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:31:39 +01:00
Anthony Liguori
34daffa048 Merge remote-tracking branch 'qemu-kvm/uq/master' into staging
* qemu-kvm/uq/master:
  qemu-kvm/pci-assign: 64 bits bar emulation
  target-i386: Enabling IA32_TSC_ADJUST for QEMU KVM guest VMs

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02 08:01:54 -06:00
Anthony Liguori
079944e695 pci,virtio
This optimizes MSIX handling in virtio-pci.
 Also included is pci express capability bugfix.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQ2tD2AAoJECgfDbjSjVRpUNcIAKN2c+3iiutUWFBBII2TWppc
 QAQ4Q5HK7gCtAnwNrlQMAIXcUzHBd5s6BW74BaFBZYymf/tqe4CsvmIH15qQyvm0
 McdJAba3FLk0+TELG/Fmf4+faM/kr3gl5Cve3YJC69NHpcq3gi8V4696sP8cGfUt
 atA+NR8AITBJDmQlcq6Vwfp+t+B1MY9D9SROT/BmfO+/kY3krkhlPL2pdcoinBa2
 zKJLz+jE0tjz7kZ99bmbb2uzKImvtFwxCVZjhD0UINjDOWd9k6ao2pWQIEftv56z
 zwz/L8TKCFdM2350XXPg99f4WbrvBqmg3Slb4vrsIYEuAWvArI8sUSYG3rC4fS4=
 =8Jun
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pci,virtio

This optimizes MSIX handling in virtio-pci.
Also included is pci express capability bugfix.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

* mst/tags/for_anthony:
  virtio-pci: don't poll masked vectors
  msix: expose access to masked/pending state
  msi: add API to get notified about pending bit poll
  pcie: Fix bug in pcie_ext_cap_set_next
  virtio: make bindings typesafe
2013-01-02 08:01:36 -06:00
Anthony Liguori
a97ff30e93 Merge remote-tracking branch 'kraxel/seabios-a810e4e' into staging
* kraxel/seabios-a810e4e:
  Update seabios to a810e4e72a0d42c7bc04eda57382f8e019add901

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02 08:01:22 -06:00
Stefan Weil
5928023cef pflash_cfi01: Suppress warning when Linux probes for AMD flash
There are several ARM and MIPS boards which are manufactured with
either Intel (pflash_cfi01.c) or AMD (pflash_cfi02.c) flash memory.

The Linux kernel supports both and first probes for AMD flash which
resulted in one or two warnings from the Intel flash emulation:

pflash_write: Unimplemented flash cmd sequence (offset 0000000000000000, wcycle 0x0 cmd 0x0 value 0xf000f0)
pflash_write: Unimplemented flash cmd sequence (offset 0000000000000000, wcycle 0x0 cmd 0x0 value 0xf0)

These warnings confuse users, so suppress them.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-01 13:05:57 +01:00
陳韋任 (Wei-Ren Chen)
0f0b939805 target-mips: Use EXCP_SC rather than a magic number
From the discussion on the ML [1], the exception limit defined by
magic number 0x100 is actually EXCP_SC defined in cpu.h. Replace the
magic number with EXCP_SC. Remove "#if 1 .. #endif" as well.

[1] http://lists.gnu.org/archive/html/qemu-devel/2012-11/msg03080.html

Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-01 12:02:24 +01:00
Jovanovic, Petar
c4aaba92e5 target-mips: Make repl_ph to sign extend to target-long
The immediate value is 9bits, should sign-extend to 16bits. The return value to
register should sign-extend to target_long, as Richard says, removing an
unnecessary cast works fun.

Signed-off-by: Dongxue Zhang <elta.era@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-01 11:55:57 +01:00
Dongxue Zhang
fe65a1fad6 Fix my email address
Fix my email address, last time it's wrong.

Signed-off-by: Dongxue Zhang <elta.era@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-01 11:50:02 +01:00
Stefan Weil
79eb8392db target-mips: Remove semicolon from macro definition
Macro RESTORE_FLUSH_MODE is similar to RESTORE_ROUNDING_MODE
but included a semicolon.

The code which uses that macro also includes a semicolon,
so the result was an empty statement.

Remove the superfluous semicolon from the macro definition.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-01 11:16:02 +01:00
Petar Jovanovic
b8abbbe8df target-mips: Fix for helpers for EXTR_* instructions
The change removes some unnecessary and incorrect code for EXTR_S.H.
Further, it corrects the mask for shift value in the EXTR_ instructions. It also
extends the existing tests so they trigger the issues corrected with the change.

Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-01 11:11:38 +01:00
Petar Jovanovic
eec8972a5b target-mips: Fix incorrect reads and writes to DSPControl register
Upper 4 bits of ccond (bits 31..28 ) of DSPControl register are not used in
the MIPS32 architecture. They are used in the MIPS64 architecture. For MIPS32
these bits must be written as zero, and return zero on read.

The change fixes writes (WRDSP) and reads (RDDSP) to the register. It also fixes
the tests that use these instructions, and makes them smaller and simpler.

Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-01 11:10:47 +01:00
Brad Smith
a795ef8dcb Fix semaphores fallback code
As reported in bug 1087114 the semaphores fallback code is broken which
results in QEMU crashing and making QEMU unusable.

This patch is from Paolo.

This needs to be back ported to the 1.3 stable tree as well.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-29 12:27:36 +00:00
Richard Henderson
753d99d38b tcg-hppa: Fix typo in brcond2
Reported-by: Stuart Brady <sdb@zubnet.me.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-29 12:21:53 +00:00
Richard Henderson
76a347e1cd tcg-i386: Perform cmov detection at runtime for 32-bit.
Existing compile-time detection is spotty at best.  Convert
it all to runtime detection instead.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-29 12:21:16 +00:00
Richard Henderson
afcb92beac tcg: Add TCGV_IS_UNUSED_*
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-29 12:14:07 +00:00
Brad Smith
927fa909d5 Disable semaphores fallback code for OpenBSD
Disable the semaphores fallback code for OpenBSD as modern OpenBSD
releases now have sem_timedwait().

Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-28 16:11:52 +00:00
Alon Levy
62054c06d4 usb/redirect.c: unbreak compilation due to include/char/char.h
Broken since:

commit 927d4878b0
Author: Paolo Bonzini <pbonzini@redhat.com>
Date:   Mon Dec 17 18:20:05 2012 +0100

    softmmu: move remaining include files to include/ subdirectories

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-28 16:09:33 +00:00
Blue Swirl
4de63460ca Merge branch 'qom-cpu' of git://repo.or.cz/qemu/afaerber
* 'qom-cpu' of git://repo.or.cz/qemu/afaerber:
  MAINTAINERS: Include X86CPU in CPU maintenance area
  cpu: Move kvm_run into CPUState
  cpu: Move kvm_state field into CPUState
  ppc_booke: Pass PowerPCCPU to ppc_booke_timers_init()
  ppc4xx_devs: Return PowerPCCPU from ppc4xx_init()
  ppc_booke: Pass PowerPCCPU to {decr,fit,wdt} timer callbacks
  ppc: Pass PowerPCCPU to [h]decr timer callbacks
  ppc: Pass PowerPCCPU to [h]decr callbacks
  ppc: Pass PowerPCCPU to ppc_set_irq()
  kvm: Pass CPUState to kvm_vcpu_ioctl()
  kvm: Pass CPUState to kvm_arch_*
  cpu: Move kvm_fd into CPUState
  qdev-properties.c: Separate core from the code used only by qemu-system-*
  qdev: Coding style fixes
  cpu: Introduce CPUListState struct
  target-alpha: Add support for -cpu ?
  target-alpha: Turn CPU definitions into subclasses
  target-alpha: Avoid leaking the alarm timer over reset
  alpha: Pass AlphaCPU array to Typhoon
  target-alpha: Let cpu_alpha_init() return AlphaCPU
2012-12-28 16:08:23 +00:00
Michael S. Tsirkin
89d62be9f4 virtio-pci: don't poll masked vectors
At the moment, when irqfd is in use but a vector is masked,
qemu will poll it and handle vector masks in userspace.
Since almost no one ever looks at the pending bits,
it is better to defer this until pending bits
are actually read.
Implement this optimization using the new poll notifier.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-26 11:49:29 +02:00
Michael S. Tsirkin
70f8ee395a msix: expose access to masked/pending state
For use by poll handler.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-26 11:49:29 +02:00
Michael S. Tsirkin
bbef882cc1 msi: add API to get notified about pending bit poll
Update all users.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-26 11:49:28 +02:00
Knut Omang
812d2594d5 pcie: Fix bug in pcie_ext_cap_set_next
Upper 16 bits of the PCIe Extended Capability Header was truncated during update,
also breaking pcie_add_capability.

Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-26 11:49:28 +02:00
Xudong Hao
0a2a59d35c qemu-kvm/pci-assign: 64 bits bar emulation
Enable 64 bits bar emulation.

Test pass with the current seabios which already support 64bit pci bars.

Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2012-12-25 14:37:52 +02:00
Gleb Natapov
a2685bcc80 MAINTAINERS: Take over kvm maintenance
Replace Avi with myself as kvm maintainer.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-23 15:30:55 -06:00
Robert Schiele
74880fe27d configure: allow disabling pixman if not needed
When we build neither any system emulation targets nor the tools there
is actually no need for pixman library.  In that case do not enforce
presence of that library on the system.

Reviewed-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-23 14:38:52 -06:00
Alex Horn
2915efbfa8 tmp105: Create API for TMP105 temperature sensor.
* Define enum for TMP105 registers
* Move tmp105_set() from I2C to TMP105 header
* Document units and range of temperature as preconditions

Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alex Horn <alex.horn@cs.ox.ac.uk>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-23 14:37:51 -06:00