Commit Graph

210 Commits

Author SHA1 Message Date
Mark McLoughlin
7f161aaea6 net: add QemuOptsList arg to net_client_parse()
Patchworks-ID: 35505
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:01 -05:00
Mark McLoughlin
d80b9fc628 net: allow clients not associated with a vlan
Allow net clients to be created which are not connected to any vlan.

This is needed by Gerd in order to allow adding -device nic, where
the absence of a vlan parameter will not imply vlan=0. Also needed
to allow adding a -netdevice option which doesn't connect the backend
to a vlan.

Patchworks-ID: 35513
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:01 -05:00
Mark McLoughlin
5610c3aaf4 net: use qtailq for vlan and client lists
Patchworks-ID: 35507
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:00 -05:00
Mark McLoughlin
dea7b3b95a net: remove id field from NICInfo
Just use the name field instead since we now use the id paramater as
the name, if supplied. Only implication with this change is that if
id is not supplied, the value of the name paramater is used as an
id.

Patchworks-ID: 35512
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:00 -05:00
Mark McLoughlin
6d952ebedd net: handle id= parameter for -net
Use id= in the same was as the current name= parameter; if both are
specified, id= is used.

Patchworks-ID: 35514
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:00 -05:00
Mark McLoughlin
8b077c9f97 net: pass monitor handle to client init functions
Needed for e.g. looking up a file descriptor name using
monitor_get_fd() in net_init_tap()

Patchworks-ID: 35509
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:00 -05:00
Juan Quintela
a3a766e7b3 slirp: fix !CONFIG_SLIRP compilation
This moves the code that depens on slirp under CONFIG_SLIRP again.

Patchworks-ID: 35372
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12 09:42:31 -05:00
Mark McLoughlin
dc1c9fe8b7 Final net cleanup after conversion to QemuOpts
Now that net_client_init() has no users, kill it off and rename
net_client_init_from_opts().

There is no further need for the old code in net_client_parse() either.
We use qemu_opts_parse() 'firstname' facitity for that. Instead, move
the special handling of the 'vmchannel' type there.

Simplify the vl.c code into merely call net_client_parse() for each
-net command line option and then calling net_init_clients() later
to iterate over the options and create the clients.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:13 -05:00
Mark McLoughlin
13cf8f2129 Port usb net to QemuOpts
We need net_client_init_from_opts() exported for this

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:13 -05:00
Mark McLoughlin
7f1c9d20ea Port host_net_add monitor command to QemuOpts
Here is where we rely on qemu_opts_parse() to handle an empty string.
We could alternatively explicitly handle this here by using
qemu_opts_create() when we're not supplied any parameters, but its
cleaner this way.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:13 -05:00
Mark McLoughlin
7b3fb25110 Clean up legacy code in net_client_init()
Now that we've ported everything over to QemuOpts, we can kill off
all the cruft in net_client_init().

Note, the 'channel' type requires special handling as it uses a
format that QemuOpts can't parse

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:12 -05:00
Mark McLoughlin
ed2955c2d6 Port -net dump to QemuOpts
Note, not incrementing nb_host_devs in net_init_dump() is intentional.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:12 -05:00
Mark McLoughlin
dd51058dfc Port -net vde to QemuOpts
The net_vde_init() change is needed because we now pass NULL pointers
instead of empty strings for group/sock if they're not set.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:12 -05:00
Mark McLoughlin
88ce16cafc Port -net socket to QemuOpts
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:12 -05:00
Mark McLoughlin
8a1c523551 Port -net tap to QemuOpts
Some parameters are not valid with fd=. Rather than having a separate
parameter description table for validating fd=, it's easir to just
check for those invalid parameters later.

Note, the need to possible lookup a file descriptor name from the
monitor is the reason why all these init functions are passed a Monitor
pointer.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:12 -05:00
Mark McLoughlin
ec302ffdfd Port -net user to QemuOpts
The handling of guestfwd and hostfwd requires the previous changes
to allow multiple values for each parameter. The only way to access
those multiple values is to use qemu_opt_foreach().

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:12 -05:00
Mark McLoughlin
f83c6e1085 Port -net none and -net nic to QemuOpts
We use a table of network types to look up the initialization function
and parameter descriptions in net_client_init().

For now, we use QemuOpts for the 'none' and 'nic' types. Subsequent
patches port the other types too and the special casing is removed.

We're not parsing the full -net option string here as the type has
been stripped from the string, so we do not use qemu_opts_parse()
'firstname' facility. This will also be rectified in subsequent
patches.

No functional changes are introduced by this patch.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:12 -05:00
Markus Armbruster
fb12577c2a Drop config_error(), use qemu_error() instead
Diagnostic output goes to stderr, except when we're in a monitor
command, when it goes to the monitor instead.

config_error() implements this with a monitor argument: if it's
non-null, report there, else to stderr.  This obliges us to pass the
monitor down various call chains, to make it available to
config_error().

The recently created qemu_error() doesn't need a monitor argument to
route output.  Use it.

There's one user-visible difference: config_error() prepended "qemu: "
to a message bound for stderr.  qemu_error() doesn't, which means the
prefix goes away with this commit.  If such a prefix is desired for
stderr, then I figure it should be slapped on all error messages, not
just the ones that used to go through config_error().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:11 -05:00
Markus Armbruster
0752706de2 Don't exit() in config_error()
Propagating errors up the call chain is tedious.  In startup code, we
can take a shortcut: terminate the program.  This is wrong elsewhere,
the monitor in particular.

config_error() tries to cater for both customers: it terminates the
program unless its mon parameter tells it it's working for the
monitor.

Its users need to return status anyway (unless passing a null mon
argument, which none do), which their users need to check.  So this
automatic exit buys us exactly nothing useful.  Only the dangerous
delusion that we can get away without returning status.  Some of its
users fell for that.  Their callers continue executing after failure
when working for the monitor.

This bites monitor command host_net_add in two places:

* net_slirp_init() continues after slirp_hostfwd(), slirp_guestfwd(),
  or slirp_smb() failed, and may end up reporting success.  This
  happens for "host_net_add user guestfwd=foo": it complains about the
  invalid guest forwarding rule, then happily creates the user network
  without guest forwarding.

* net_client_init() can't detect slirp_guestfwd() failure, and gets
  fooled by net_slirp_init() lying about success.  Suppresses its
  "Could not initialize device" message.

Add the missing error reporting, make sure errors are checked, and
drop the exit() from config_error().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:10 -05:00
Markus Armbruster
3a179c6614 Make net_client_init() consume slirp_configs even on error
net_slirp_init() walks slirp_configs, and stops when it encounters one
that doesn't work.  Instead of consuming slirp_configs members there,
consume them in the sole caller.  This makes sure all are consumed.
Before, the tail starting with the non-working one was left in place,
where it made the next net_slirp_init() fail again.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:10 -05:00
Mark McLoughlin
02374aa02a Use qemu_strdup() for VLANClientState string fields
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:10 -05:00
Mark McLoughlin
d2cffe303e Move memset() from net_client_uninit() to net_client_init()
zeroing a structure before using it is more common than zeroing after
using it. Also makes the setting of nd->used more obvious.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:10 -05:00
Mark McLoughlin
9203f5202b Make NICInfo string fields non-const
We now only assign strdup()ed strings to these fields, never static
strings.

aliguori: fix build for ppc_prep and mips_jazz

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:10 -05:00
Mark McLoughlin
32a8e14a0b Use qemu_strdup() for NICInfo string fields
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:10 -05:00
Markus Armbruster
07caea315a Fix pci_add nic not to exit on bad model
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to
create the NIC.  When MODEL is unknown or "?", this prints to stderr
and terminates the program.

Change pci_nic_init() not to treat "?" specially, and to return NULL
on failure.  Switch uses during startup to new convenience wrapper
pci_nic_init_nofail(), which behaves just like pci_nic_init() used to
do.

Bonus bug fix: we now check for qdev_init() failing there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:53 -05:00
Markus Armbruster
9ee05825d9 Make it obvious that pci_nic_init() can't fail
Before this patch, pci_nic_init() returns NULL when it can't find the
model in pci_nic_models[].  Except this can't happen, because
qemu_check_nic_model_list() just searched for model in
pci_nic_models[], and terminated the program on failure.

Repeating the search here is pointless.  Instead, change
qemu_check_nic_model_list() to return the model's array index.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:53 -05:00
Glauber Costa
a979670344 Correctly free nd structure
When we "free" a NICInfo structure, we can leak pointers, since we don't do
much more than setting used = 0.

We free() the model parameter, but we don't set it to NULL. This means that
a new user of this structure will see garbage in there. It was not noticed
before because reusing a NICInfo is not that common, but it can be, for
users of device pci hotplug.

A user hit it, described at https://bugzilla.redhat.com/show_bug.cgi?id=524022

This patch memset's the whole structure, guaranteeing that anyone reusing it
will see a fresh NICinfo. Also, we free some other strings that are currently
leaking.

This codebase is quite old, so this patch should feed all stable trees.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:44 -05:00
Michael S. Tsirkin
acedcfbf7a net: fix coding style nit
Put space between = and - assigning a negative number
to avoid confusion with old-style "-="
(which we also have, and need to be fixed).

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-30 18:56:44 +00:00
Blue Swirl
72cf2d4f0e Fix sys-queue.h conflict for good
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.

Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-12 07:36:22 +00:00
Juan Quintela
6ee093c907 Unexport ticks_per_sec variable. Create get_ticks_per_sec() function
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11 10:19:52 -05:00
Blue Swirl
f40d753718 Include sys-queue.h early to override system queue definitions on BSD
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-04 17:47:09 +00:00
Luiz Capitulino
1d4daa91ff monitor: Port handler_3 to use QDict
This commit ports command handlers that receive three arguments to use
the new monitor's dictionary.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04 09:37:31 -05:00
Luiz Capitulino
f18c16de4a monitor: Port handler_2 to use QDict
This commit ports command handlers that receive two arguments to use
the new monitor's dictionary.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04 09:37:31 -05:00
Jan Kiszka
9da4318706 net: Fix send queue ordering
Ensure that packets enqueued for delayed delivery are dequeued in FIFO
order. At least one simplistic guest TCP/IP stack became unhappy due to
sporadically reordered packet streams.

At this chance, switch the send queue implementation to TAILQ.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04 09:37:27 -05:00
Stefan Weil
7dc3fa0913 Add missing linefeed in error message
The error message for an unknown network device given to
monitor command set_link looks better with a terminating
linefeed.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24 08:01:40 -05:00
Luiz Capitulino
c3cf0d3f96 net: Fix do_set_link() return type
do_set_link() returns int, but Monitor handler functions should
always return void.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:48 -05:00
Juan Quintela
71e72a19ba rename HOST_BSD to CONFIG_BSD
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27 14:09:20 -05:00
Filip Navara
8fde6546fb Remove useless Win32 include files and unused function in net.c.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27 14:09:15 -05:00
Jan Kiszka
bb53fc5394 slirp: Fix guestfwd for incoming data
Unless a virtual server address was explicitly defined (which is
impossible with the legacy -net channel format), guestfwd did not
properly forwarded host->guest packets. This patch fixes it.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27 14:08:23 -05:00
Mark McLoughlin
c1d6eed7e8 Add support for fd=name to tap and socket networking
This allows a program to initialize a host networking device using a
file descriptor passed over a unix monitor socket.

The program must first pass the file descriptor using SCM_RIGHTS
ancillary data with the getfd monitor command. It then may do
"host_net_add tap fd=name" to use the named file descriptor.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27 08:39:28 -05:00
Gerd Hoffmann
eb54b6dcb8 qdev: add id= support for pci nics.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16 17:28:53 -05:00
Anthony Liguori
8389e7f4e1 slirp: Fix default netmask to 255.255.255.0
This got broken between a13a4126c8 and c92ef6a22d: old slirp code used
255.255.255.0.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16 08:28:12 -05:00
Mark McLoughlin
d026fb6dab Don't abort if TUNSETSNDBUF fails where no sndbuf= arg is supplied
If no tap,sndbuf= arg is supplied, we use a default value. If
TUNSETSNDBUF fails in this case, we should not abort.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09 16:58:07 -05:00
Mark McLoughlin
fc5b81d1f6 net: set a default value for sndbuf=
On reflection, perhaps it does make sense to set a default value for
the sndbuf= tap parameter.

For best effect, sndbuf= should be set to just below the capacity of
the physical NIC.

Setting it higher will cause packets to be dropped before the limit
is hit. Setting it much lower will not cause any problems unless
you set it low enough such that the guest cannot queue up new packets
before the NIC has emptied its queue.

In Linux, txqueuelen=1000 by default for ethernet NICs. Given a 1500
byte MTU, 1Mb is a good choice for sndbuf.

If it turns out that txqueuelen is actually much lower than this, then
sndbuf is essentially disabled. In the event that txqueuelen is much
higher, it's unlikely that the NIC will be able to empty a 1Mb queue.

Thanks to Herbert Xu for this logic.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Cc: Herbert Xu <herbert.xu@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09 16:06:37 -05:00
Blue Swirl
3da6abd472 Use pstrcpy and pstrcat to avoid OpenBSD linker warning
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-01 20:29:39 +00:00
Jan Kiszka
fc57bc5780 slirp: Basic VLAN client info_str
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:51 -05:00
Jan Kiszka
f13b572cb3 slirp: Make hostfwd_add/remove multi-instance-aware
Extend the syntax of hostfwd_add/remove to optionally take a tuple of
VLAN ID and slirp stack name. If those are omitted, the commands will
continue to work on the first registered slirp stack.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:50 -05:00
Jan Kiszka
1a60952027 net: Provide VLAN client lookup helper
Introduce qemu_find_vlan_client_by_name for VLANClientState lookup based
on VLAN ID and client name. This is useful for monitor commands.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:50 -05:00
Jan Kiszka
28432466f3 slirp: Enable multi-instance support for the smb service
Push the smb state, smb_dir, into SlirpState and construct it in a way
that allows multiple smb instances (one per slirp stack). Remove the smb
directory on slirp cleanup instead of qemu termination. As VLAN clients
are also cleaned up on process termination, no feature is lost.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:50 -05:00
Jan Kiszka
492efabd47 slirp: Improve error handling in slirp_smb
Make sure for invocations from the monitor that slirp_smb properly
reports errors and doesn't terminate qemu.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:50 -05:00
Jan Kiszka
09c1892576 slirp: Use shell to erase smb directory
Instead of open-coding this, we can use the power of the shell to remove
the smb_dir on exit.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:50 -05:00
Jan Kiszka
b1c99fcdf5 slirp: Enable multiple instances
Once again this was a long journey to reach the destination: Allow to
instantiate slirp multiple times. But as in the past, the journey was
worthwhile, cleaning up, fixing and enhancing various parts of the user
space network stack along the way.

What is this particular change good for? Multiple slirps instances
allow separated user space networks for guests with multiple NICs. This
is already possible, but without any slirp support for the second
network, ie. without a chance to talk to that network from the host via
IP. We have a legacy guest system here that benefits from this slirp
enhancement, allowing us to run both of its NICs purely over
unprivileged user space IP stacks.

Another benefit of this patch is that it simply removes an artificial
restriction of the configuration space qemu is providing, avoiding
another source of surprises that users may face when playing with
possible setups.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:50 -05:00
Jan Kiszka
ad0d8c4c32 slirp: Allocate/free stack instance dynamically
Allocate the internal slirp state dynamically and provide and call
slirp_cleanup to properly release it after use. This patch finally
unbreaks slirp release and re-instantiation via host_net_* monitor
commands.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:49 -05:00
Jan Kiszka
9f8bd0421d slirp: Use internal state in interface
This now also exports the internal state to the slirp users in qemu,
returning it from slirp_init and expecting it along with service
invocations. Additionally provide an opaque value interface for the
callbacks from slirp into the qemu core.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:49 -05:00
Jan Kiszka
d6cf84e1de slirp: Drop redundant checks from slirp_output
Slirp doesn't invoke slirp[_can]_output before it is initialized. The
motivation for these checks (3b7f5d479c) no longer applies. So drop
them.

Note: slirp_vc will become invalid if the slirp stack is removed during
runtime. But this is no new bug and will be fixed later.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:49 -05:00
Jan Kiszka
d918f23efa slirp: Kill slirp_is_inited
Avoid the need for slirp_is_inited by refactoring the protected
slirp_select_* functions. This also avoids the clearing of all fd sets
on select errors.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:49 -05:00
Jan Kiszka
0fe6a7f284 slirp: Drop statistic code
As agreed on the mailing list, there is no interest in keeping the
usually disabled slirp statistics in the tree. So this patch removes
them.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:46 -05:00
Jan Kiszka
6dbe553fe9 slirp: Add info usernet for dumping connection states
Break out sockstats from the slirp statistics and present them under the
new info category "usernet". This patch also improves the current output
/wrt proper reporting connection source and destination.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:46 -05:00
Jan Kiszka
9c12a6f24d slirp: Do not allow to remove non-hostfwd sockets
Prevent that the users accidentally shoots down dynamic sockets. This
allows to remove looping for removals as there can now only be one
match.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:46 -05:00
Jan Kiszka
3c6a05803c slirp: Bind support for host forwarding rules
Extend the hostfwd rule format so that the user can specify on which
host interface qemu should listen for incoming connections. If omitted,
binding will takes place against all interfaces.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:45 -05:00
Jan Kiszka
f3546deb07 slirp: Rework monitor commands for host forwarding
Improve the monitor interface for adding and removing host forwarding
rules by splitting it up in two commands and rename them to hostfwd_add
and hostfwd_remove. Also split up the paths taken for legacy -redir
support and the monitor add command as the latter will be extended later
on.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:45 -05:00
Jan Kiszka
c92ef6a22d slirp: Rework external configuration interface
With the internal IP configuration made more flexible, we can now
enhance the user interface. This patch adds a number of new options to
"-net user": net (address and mask), host, dhcpstart, dns and smbserver.
It also renames "redir" to "hostfwd" and "channel" to "guestfwd" in
order to (hopefully) clarify their meanings. The format of guestfwd is
extended so that the user can define not only the port but also the
virtual server's IP address the forwarding starts from.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:45 -05:00
Jan Kiszka
ad196a9d0c slirp: Move smb, redir, tftp and bootp parameters and -net channel
So far a couple of slirp-related parameters were expressed via
stand-alone command line options. This it inconsistent and unintuitive.
Moreover, it prevents both dynamically reconfigured (host_net_add/
delete) and multi-instance slirp.

This patch refactors the configuration by turning -smb, -redir, -tftp
and -bootp as well as -net channel into options of "-net user". The old
stand-alone command line options are still processed, but no longer
advertised. This allows smooth migration of management applications to
to the new syntax and also the extension of that syntax later in this
series.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:44 -05:00
Jan Kiszka
e15f4a992c Revert "User networking: Show active connections"
This reverts commit 1c6ed9f337.

It's redundant to slirp statistics, which are going to be split up /
reworked later on.

Conflicts:

	monitor.c
	net.c

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:44 -05:00
Michael S. Tsirkin
ffe6370c9f qemu/net: flag to control the number of vectors a nic has
Add an option to specify the number of MSI-X vectors for PCI NIC cards. This
can also be used to disable MSI-X, for compatibility with old qemu. This
option currently only affects virtio cards.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-24 09:09:15 -05:00
Mark McLoughlin
783527a9ef net: add packet length to NetPacketSent callback
virtio-net needs this - for the same purpose that it currently uses the
return value from qemu_sendv_packet().

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:15:30 -05:00
Mark McLoughlin
0df0ff6de7 net: add '-net tap,sndbuf=nbytes'
2.6.30 adds a new TUNSETSNDBUF ioctl() which allows a send buffer limit
for the tap device to be specified. When this limit is reached, a tap
write() will return EAGAIN and poll() will indicate the fd isn't
writable.

This allows people to tune their setups so as to avoid e.g. UDP packet
loss when the sending application in the guest out-runs the NIC in the
host.

There is no obviously sensible default setting - a suitable value
depends mostly on the capabilities of the physical NIC through which the
packets are being sent.

Also, note that when using a bridge with netfilter enabled, we currently
never get EAGAIN because netfilter causes the packet to be immediately
orphaned. Set /proc/sys/net/bridge/bridge nf-call-iptables to zero to
disable this behaviour.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:15:30 -05:00
Mark McLoughlin
4a77b25e2a net: return TAPState from net_tap_init()
net_tap_fd_init() already returns TAPState, so this is a sensible
cleanup in its own right.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:15:30 -05:00
Mark McLoughlin
1f7babf6d5 net: handle EAGAIN from tapfd write()
If a write() on tapfd returns EAGAIN, return zero so that the packet
gets queued (in the case of async send) and enable polling tapfd for
writing.

When tapfd becomes writable, disable write polling and flush any queued
packets.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:15:30 -05:00
Mark McLoughlin
b664e3673c net: add tap_read_poll() helper
Add a helper to enable/disable the read polling on tapfd.

We need this, because we want to start write polling on the tapfd too
and enable/disable both types of polling independently.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:15:30 -05:00
Mark McLoughlin
b9adce2c83 net: purge queued packets in tap_cleanup()
If tap has any packets queued at host_net_remove time, it needs to purge
them in order to prevent a sent callback being invoked for it.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:15:30 -05:00
Mark McLoughlin
8cad55161c net: add qemu_purge_queued_packets()
If net client sends packets asynchronously, it needs to purge its queued
packets in cleanup() so as to prevent sent callbacks being invoked with
a freed client.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:15:30 -05:00
Markus Armbruster
5607c38820 Support addr=... in option argument of -net nic
Make net_client_init() accept addr=, put the value into struct
NICinfo.  Use it in pci_nic_init(), and remove arguments bus and
devfn.

Don't support addr= in third argument of monitor command pci_add,
because that clashes with its first argument.  Admittedly unelegant.

Machines "malta" and "r2d" have a default NIC with a well-known PCI
address.  Deal with that the same way as the NIC model: make
pci_nic_init() take an optional default to be used when the user
doesn't specify one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:15:29 -05:00
Filip Navara
024431b3d8 Add O_BINARY to open call in net_dump_init.
Fix the pcap dumps on Win32 and other systems where O_BINARY is required.

Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:10:50 -05:00
Glauber Costa
406c8df3a9 Make nic option rom loading less painful.
The code how it is today, is totally painful to read and keep.
To begin with, the code is duplicated with the option rom loading
code that linux_boot and vga are already using.

This patch introduces a "bootable" state in NICInfo structure,
that we can use to keep track of whether or not a given nic should
be bootable, avoiding the introduction of yet another global state.

With that in hands, we move the code in vl.c to hw/pc.c, and use
the already existing infra structure to load those option roms.

Error checking code suggested by Mark McLoughlin

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:10:50 -05:00
Stefan Weil
705032644f Win32: Don't remove const attribute in type casts.
Type casts removing the const attribute are bad because
they hide the fact that the argument remains const.

They also result in a compiler warning (at least with MS-C).

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2009-06-13 14:22:03 +03:00
Blue Swirl
c5b76b3810 Fix mingw32 build warnings
Work around buffer and ioctlsocket argument type signedness problems
Suppress a prototype which is unused on mingw32
Expand a macro to avoid warnings from some GCC versions

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-13 08:44:31 +00:00
Anthony Liguori
068daedd7d Fix build breakage when using VDE introduced by 4f1c942
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-10 20:24:44 -05:00
Mark McLoughlin
e19eb22486 net: make use of async packet sending API in tap client
If a packet is queued by qemu_send_packet(), remove I/O
handler for the tap fd until we get notification that the
packet has been sent.

A not insignificant side effect of this is we can now
drain the tap send queue in one go without fear of packets
being dropped.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:50 +01:00
Mark McLoughlin
f3b6c7fcf8 net: add qemu_send_packet_async()
Add a qemu_send_packet() variant which will queue up the packet
if it cannot be sent when all client queues are full. It later
invokes the supplied callback when the packet has been sent.

If qemu_send_packet_async() returns zero, the caller is expected
to not send any more packets until the queued packet has been
sent.

Packets are queued iff a receive() handler returns zero (indicating
queue full) and the caller has provided a sent notification callback
(indicating it will stop and start its own queue).

We need the packet sending API to support queueing because:

  - a sending client should process all available packets in one go
    (e.g. virtio-net emptying its tx ring)

  - a receiving client may not be able to handle the packet
    (e.g. -EAGAIN from write() to tapfd)

  - the sending client could detect this condition in advance
    (e.g. by select() for writable on tapfd)

  - that's too much overhead (e.g. a select() call per packet)

  - therefore the sending client must handle the condition by
    dropping the packet or queueing it

  - dropping packets is poor form; we should queue.

However, we don't want queueing to be completely transparent. We
want the sending client to stop sending packets as soon as a
packet is queued. This allows the sending client to be throttled
by the receiver.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:50 +01:00
Mark McLoughlin
e94667b91c net: split out packet queueing and flushing into separate functions
We'll be doing more packet queueing in later commits.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:50 +01:00
Mark McLoughlin
3e021d40b7 net: return status from qemu_deliver_packet()
Will allow qemu_send_packet() handle queue full condition.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:50 +01:00
Mark McLoughlin
4f1c942b7f net: add return value to packet receive handler
This allows us to handle queue full conditions rather than dropping
the packet on the floor.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Mark McLoughlin
e3f5ec2b5e net: pass VLANClientState* as first arg to receive handlers
Give static type checking a chance to catch errors.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Mark McLoughlin
cda9046ba7 net: re-name vc->fd_read() to vc->receive()
VLANClientState's fd_read() handler doesn't read from file
descriptors, it adds a buffer to the client's receive queue.

Re-name the handlers to make things a little less confusing.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Mark McLoughlin
463af5349a net: add fd_readv() handler to qemu_new_vlan_client() args
This, apparently, is the style we prefer - all VLANClientState
should be an argument to qemu_new_vlan_client().

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Mark McLoughlin
3471b757d0 net: only read from tapfd when we can send
Reduce the number of packets dropped under heavy network
traffic by only reading a packet from the tapfd when a
client can actually handle it.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Mark McLoughlin
2e1e064110 net: vlan clients with no fd_can_read() can always receive
If a vlan client has no fd_can_read(), that means it can
always receive packets. The current code assumes it can *never*
receive packets.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Mark McLoughlin
5b01e886d9 net: move the tap buffer into TAPState
KVM uses a 64k buffer for reading from tapfd (for GSO support)
and allocates the buffer with TAPState rather than on the stack.

Not allocating it on the stack probably makes sense for qemu
anyway, so merge it in advance of GSO support.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Mark McLoughlin
5a6d881574 net: factor tap_read_packet() out of tap_send()
Move portability clutter out into its own function.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Jan Kiszka
b8e8af38ee slirp: Reorder initialization
This patch reorders the initialization of slirp itself as well as its
associated features smb and redirection. So far the first reference to
slirp triggered the initialization, independent of the actual -net user
option which may carry additional parameters. Now we save any request to
add a smb export or some redirections until the actual initialization of
the stack. This also allows to move a few parameters that were passed
via global variable into the argument list of net_slirp_init.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Jan Kiszka
10ae5a7a98 net: Improve parameter error reporting
As host network devices can also be instantiated via the monitor, errors
should then be reported to the related monitor instead of stderr. This
requires larger refactoring, so this patch starts small with introducing
a helper to catch both cases and convert net_client_init as well as
net_slirp_redir.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Mark McLoughlin
c8decae2e1 net: fix error reporting for some net parameter checks
A small bit of confusion between buffers is causing errors like:

  qemu: invalid parameter '10' in 'script=/etc/qemu-ifup,fd=10'

instead of:

  qemu: invalid parameter 'script' in 'script=/etc/qemu-ifup,fd=10'

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Jan Kiszka
0aa7a205c8 net: Real fix for check_params users
OK, last try: 8e4416af45 broke -net socket, ffad4116b9 tried to fix it
but broke error reporting of invalid parameters. So this patch widely
reverts ffad4116b9 again and intead fixes those callers of check_params
that originally suffered from overwritten buffers by using separate
ones.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Mark McLoughlin
cda94b2782 Revert "Fix output of uninitialized strings"
This reverts commit 8cf07dcbe7.

This is a sorry saga.

This commit:

  8e4416af45 net: Add parameter checks for VLAN clients

broken '-net socket' and this commit:

  ffad4116b9 net: Fix -net socket parameter checks

fixed the problem but introduced another problem which
this commit:

  8cf07dcbe7 Fix output of uninitialized strings

fixed that final problem, but causing us to lose some
error reporting information in the process.

Meanwhile Jan posted a patch to mostly re-do ffad4116b9
in a way that fixes the original issue, but without
losing the error reporting information. So, let's revert
8cf07dcbe7 and apply Jan's patch.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Jan Kiszka
7c3370d4fe slirp: Avoid zombie processes after fork_exec
Slirp uses fork_exec for spawning service processes, and QEMU uses this
for running smbd. As SIGCHLD is not handled, these processes become
zombies on termination. Fix this by installing a proper signal handler,
but also make sure we disable the signal while waiting on forked network
setup/shutdown scripts.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Jan Kiszka
c27ff60871 net: Fix and improved ordered packet delivery
Fix a race in qemu_send_packet when delivering deferred packets and
add proper deferring also to qemu_sendv_packet.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:48 +01:00
Jan Kiszka
c8aa237c64 net: Don't deliver to disabled interfaces in qemu_sendv_packet
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:48 +01:00
Alexander Graf
1c6ed9f337 User networking: Show active connections
In case you're wondering what connections exactly you have open
or maybe redir'ed in the past, you can't really find out from qemu
right now.

This patch enables you to see all current connections the host
only networking holds open, so you can kill them using the previous
patch.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-28 02:14:56 -05:00
Alexander Graf
c1261d8d16 User Networking: Enable removal of redirections
Using the new host_net_redir command you can easily create redirections
on the fly while your VM is running.

While that's great, it's missing the removal of redirections, in case you
want to have a port closed again at a later point in time.

This patch adds support for removal of redirections.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27 09:46:12 -05:00