Commit Graph

15 Commits

Author SHA1 Message Date
Alexander Graf d590081380 target-s390: enable SIGP Initial Reset
For SMP to work with KVM, we need to properly emulate the SIGP Initial Reset
Command. Recent (2.6.32) kernels issue that before the SIGP Reset command that
actually wakes up the vcpu.

This patch makes -smp work on S390x.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-18 21:23:24 +02:00
Gleb Natapov 4513d9232b Do not stop VM if emulation failed in userspace.
Continue vcpu execution in case emulation failure happened while vcpu
was in userspace. In this case #UD will be injected into the guest
allowing guest OS to kill offending process and continue.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-11 14:03:44 -03:00
Marcelo Tosatti 0af691d779 kvm: enable smp > 1
Process INIT/SIPI requests and enable -smp > 1.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-11 14:02:22 -03:00
Alexander Graf c92114b1fb S390: Add stub for cpu_get_phys_page_debug
We don't implement any virtual memory in the S390 target so far, so let's
add a stub for this now mandatory function.

Fixes building of S390 target.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01 21:51:59 +02:00
Paul Brook d4c430a80f Large page TLB flush
QEMU uses a fixed page size for the CPU TLB.  If the guest uses large
pages then we effectively split these into multiple smaller pages, and
populate the corresponding TLB entries on demand.

When the guest invalidates the TLB by virtual address we must invalidate
all entries covered by the large page.  However the address used to
invalidate the entry may not be present in the QEMU TLB, so we do not
know which regions to clear.

Implementing a full vaiable size TLB is hard and slow, so just keep a
simple address/mask pair to record which addresses may have been mapped by
large pages.  If the guest invalidates this region then flush the
whole TLB.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-17 02:44:41 +00:00
Paul Brook 4fcc562bff Remove cpu_get_phys_page_debug from userspace emulation
cpu_get_phys_page_debug makes no sense for userspace emulation, so remove it.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-12 18:34:25 +00:00
Richard Henderson 5270589032 Move TARGET_PHYS_ADDR_SPACE_BITS to target-*/cpu.h.
Removes a set of ifdefs from exec.c.

Introduce TARGET_VIRT_ADDR_SPACE_BITS for all targets other
than Alpha.  This will be used for page_find_alloc, which is
supposed to be using virtual addresses in the first place.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2010-03-12 16:28:24 +00:00
Blue Swirl 70539e1850 Update to a hopefully more future proof FSF address
See also 8167ee8839,
530e7615ce and
fad6cb1a56.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-07 15:48:43 +00:00
Jan Kiszka ea375f9ab8 KVM: Rework VCPU state writeback API
This grand cleanup drops all reset and vmsave/load related
synchronization points in favor of four(!) generic hooks:

- cpu_synchronize_all_states in qemu_savevm_state_complete
  (initial sync from kernel before vmsave)
- cpu_synchronize_all_post_init in qemu_loadvm_state
  (writeback after vmload)
- cpu_synchronize_all_post_init in main after machine init
- cpu_synchronize_all_post_reset in qemu_system_reset
  (writeback after system reset)

These writeback points + the existing one of VCPU exec after
cpu_synchronize_state map on three levels of writeback:

- KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run)
- KVM_PUT_RESET_STATE   (on synchronous system reset, all VCPUs stopped)
- KVM_PUT_FULL_STATE    (on init or vmload, all VCPUs stopped as well)

This level is passed to the arch-specific VCPU state writing function
that will decide which concrete substates need to be written. That way,
no writer of load, save or reset functions that interact with in-kernel
KVM states will ever have to worry about synchronization again. That
also means that a lot of reasons for races, segfaults and deadlocks are
eliminated.

cpu_synchronize_state remains untouched, just as Anthony suggested. We
continue to need it before reading or writing of VCPU states that are
also tracked by in-kernel KVM subsystems.

Consequently, this patch removes many cpu_synchronize_state calls that
are now redundant, just like remaining explicit register syncs.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-04 00:29:28 -03:00
Blue Swirl ee0dc6d393 Fix incorrect exception_index use
env->exception_index should be cleared with -1, not 0.

See also 821b19fe92.

Spotted by Igor Kovalenko.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-14 07:23:50 +00:00
Paolo Bonzini 49a945a3c0 kill regs_to_env and env_to_regs
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-19 16:31:02 -06:00
Alexander Graf d7963c43b9 target-s390: Fail on unknown instructions
We were being a bit too nice and didn't give the guest an invalid instruction
interrupt.

While that works, it's not exactly the fastest thing to do, since now the
guest doesn't know that we're not really implementing that instruction, so it
continues doing it.

We run into this with the set_page_unstable hint instruction. So let's bail out
in these cases.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18 16:32:03 +01:00
Alexander Graf 10c339a07d Add support for S390x system emulation
Let's enable the basics for system emulation so we can run virtual machines
with KVM!

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-05 17:36:05 +01:00
Alexander Graf 0e60a699d2 Add KVM support for S390x
S390x was one of the first platforms that received support for KVM back in the
day. Unfortunately until now there hasn't been a qemu implementation that would
enable users to actually run guests.

So let's include support for KVM S390x in qemu!

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-05 17:36:02 +01:00
Alexander Graf 10ec51174c S/390 CPU fake emulation
Because Qemu currently requires a TCG target to exist and there are quite some
useful helpers here to lay the groundwork for out KVM target, let's create a
stub TCG emulation target for S390X CPUs.

This is required to make tcg happy. The emulation target itself won't work
though.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-05 17:36:00 +01:00