Commit Graph

57 Commits

Author SHA1 Message Date
Juan Quintela 16310a3cca savevm: split save_live into stage2 and stage3
We split it into 2 functions, foo_live_iterate, and foo_live_complete.
At this point, we only remove the bits that are for the other stage,
functionally this is equivalent to previous code.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20 08:19:27 +02:00
Juan Quintela d1315aac6e savevm: split save_live_setup from save_live_state
This patch splits stage 1 to its own function for both save_live
users, ram and block.  It is just a copy of the function, removing the
parts of the other stages.  Optimizations would came later.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20 08:19:27 +02:00
Juan Quintela 6bd6878133 savevm: introduce is_active method
Enable the creation of a method to tell migration if that section is
active and should be migrate.  We use it for blk-migration, that is
normally not active.  We don't create the method for RAM, as setups
without RAM are very strange O:-)

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20 08:19:27 +02:00
Juan Quintela 9b5bfab05f savevm: Refactor cancel operation in its own operation
Intead of abusing stage with value -1.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20 08:19:27 +02:00
Juan Quintela 7908c78d3e savevm: Live migration handlers register the struct directly
Notice that the live migration users never unregister, so no problem
about freeing the ops structure.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20 08:19:27 +02:00
Isaku Yamahata 6607ae235b Add MigrationParams structure
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2012-06-29 13:18:21 +02:00
Luiz Capitulino 539de1246d Purge migration of (almost) everything to do with monitors
The Monitor object is passed back and forth within the migration/savevm
code so that it can print errors and progress to the user.

However, that approach assumes a HMP monitor, being completely invalid
in QMP.

This commit drops almost every single usage of the Monitor object, all
monitor_printf() calls have been converted into DPRINTF() ones.

There are a few remaining Monitor objects, those are going to be dropped
by the next commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-15 10:39:52 -03:00
Paolo Bonzini 6b620ca3b0 prepare for future GPLv2+ relicensing
All files under GPLv2 will get GPLv2+ changes starting tomorrow.
event_notifier.c and exec-obsolete.h were only ever touched by Red Hat
employees and can be relicensed now.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-13 10:55:56 -06:00
Paolo Bonzini ad54ae80c7 block: bdrv_aio_* do not return NULL
Initially done with the following semantic patch:

@ rule1 @
expression E;
statement S;
@@
  E =
(
   bdrv_aio_readv
|  bdrv_aio_writev
|  bdrv_aio_flush
|  bdrv_aio_discard
|  bdrv_aio_ioctl
)
     (...);
(
- if (E == NULL) { ... }
|
- if (E)
    { <... S ...> }
)

which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-15 12:40:07 +01:00
Stefan Hajnoczi 922453bca6 block: convert qemu_aio_flush() calls to bdrv_drain_all()
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O.  Most of these places actually want to drain all block
requests but there is no block layer API to do so.

This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete.  As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:56:06 +01:00
Stefan Weil 4238e26416 Fix some spelling bugs in documentation and comments
These errors were detected by codespell:

remaing -> remaining
soley -> solely
virutal -> virtual
seperate -> separate

libcacard.txt still needs some more patches.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-17 12:57:36 +00:00
Juan Quintela 2975725f6b migration: make *save_live return errors
Make *save_live() return negative values when there is one error, and
updates all callers to check for the error.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20 13:23:52 +02:00
Juan Quintela 42802d47dd migration: use qemu_file_get_error() return value when possible
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20 13:23:52 +02:00
Juan Quintela 624b9cc209 migration: rename qemu_file_has_error to qemu_file_get_error
Now the function returned errno, so it is better the new name.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20 13:23:52 +02:00
Juan Quintela dcd1d224df migration: change has_error to contain errno values
We normally already have an errno value.  When not, abuse EIO.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20 13:23:52 +02:00
Anthony Liguori 7267c0947d Use glib memory allocation and free functions
qemu_malloc/qemu_free no longer exist after this commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20 23:01:08 -05:00
Markus Armbruster 6daf194dde Strip trailing '\n' from error_report()'s first argument
error_report() prepends location, and appends a newline.  The message
constructed from the arguments should not contain a newline.  Fix the
obvious offenders.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-24 09:13:36 +01:00
Avishay Traeger ff5c52a379 Improve accuracy of block migration bandwidth calculation
block_mig_state.total_time is currently the sum of the read request
latencies.  This is not very accurate because block migration uses aio and
so several requests can be submitted at once.  Bandwidth should be computed
with wall-clock time, not by adding the latencies.  In this case,
"total_time" has a higher value than it should, and so the computed
bandwidth is lower than it is in reality.  This means that migration can
take longer than it needs to.
However, we don't want to use pure wall-clock time here.  We are computing
bandwidth in the asynchronous phase, where the migration repeatedly wakes
up and sends some aio requests.  The computed bandwidth will be used for
synchronous transfer.

Signed-off-by: Avishay Traeger <avishay@il.ibm.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-27 14:36:57 +02:00
Avishay Traeger 155eb9aa09 Fix integer overflow in block migration bandwidth calculation
block_mig_state.reads is an int, and multiplying by BLOCK_SIZE yielded a
negative number, resulting in a negative bandwidth (running on a 32-bit
machine).  Change order to avoid.

Signed-off-by: Avishay Traeger <avishay@il.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-07 13:51:48 +02:00
Marcelo Tosatti 8591675f44 block: enable in_use flag
Set block device in use during block migration, disallow drive_del and
bdrv_truncate for in use devices.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-02-07 12:51:19 +01:00
Marcelo Tosatti f48905d44f block-migration: add reference to target DriveInfo
So that ejection of attached device by guest does not free data
in use by block migration instance.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-02-07 12:51:19 +01:00
Marcelo Tosatti 8f794c557c block-migration: actually disable dirty tracking on cleanup
Call to set_dirty_tracking() is misplaced.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-02-07 12:51:19 +01:00
Pierre Riteau 77358b59f6 Fix block migration when the device size is not a multiple of 1 MB
b02bea3a85 added a check on the return
value of bdrv_write and aborts migration when it fails. However, if the
size of the block device to migrate is not a multiple of BLOCK_SIZE
(currently 1 MB), the last bdrv_write will fail with -EIO.

Fixed by calling bdrv_write with the correct size of the last block.

Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24 16:41:50 +01:00
Pierre Riteau 8b6b2afcf8 Avoid divide by zero when there is no block device to migrate
When block migration is requested and no read-write block device is
present, a divide by zero exception is triggered because
total_sector_sum equals zero.

Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24 11:08:50 +01:00
Marcelo Tosatti 62155e2b51 block migration: do not submit multiple AIOs for same sector (v2)
An old version of this patch was applied to master, so this contains the
differences between v1 and v2.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-24 17:31:06 +01:00
Marcelo Tosatti 33656af702 block migration: do not submit multiple AIOs for same sector
Block migration can submit multiple AIO reads for the same sector/chunk, but
completion of such reads can happen out of order:

migration               guest
- get_dirty(N)
- aio_read(N)
- clear_dirty(N)
                        write(N)
                        set_dirty(N)
- get_dirty(N)
- aio_read(N)

If the first aio_read completes after the second, stale data will be
migrated to the destination.

Fix by not allowing multiple AIOs inflight for the same sector.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:56 -06:00
Yoshiaki Tamura bd0858bb46 block migration: replace tabs by spaces.
Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03 15:57:22 +02:00
Yoshiaki Tamura b02bea3a85 block migration: propagate return value when bdrv_write() returns < 0
Currently block_load() doesn't check return value of bdrv_write(), and
even the destination weren't prepared to execute block migration, it
proceeds and guest boots on the target.  This patch fix this issue.

Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-26 13:39:39 +02:00
Shahar Havivi 31f54f24bb Block migration fail, ignore error from bdrv_getlength
When there is no block driver associate with BlockDriverState bdrv_getlength
returns -ENOMEDIUM that cause block migration to fail

Signed-off-by: Shahar Havivi <shaharh@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-13 17:48:17 +02:00
Anthony Liguori 5efb397f87 Merge remote branch 'kwolf/for-anthony' into staging 2010-07-06 10:48:01 -05:00
Alex Williamson 0be71e324f savevm: Add DeviceState param
When available, we'd like to be able to access the DeviceState
when registering a savevm.  For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06 10:36:28 -05:00
Markus Armbruster d246673dcb block migration: Fix test for read-only drive
init_blk_migration_it() skips drives with type hint BDRV_TYPE_CDROM.
The intention is to skip read-only drives.  However, BDRV_TYPE_CDROM
is only a hint.  It is currently sufficent for read-only.  But it's
not necessary, and it may not remain sufficient.

Use bdrv_is_read_only() instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06 17:05:49 +02:00
Stefan Hajnoczi b66460e4e9 block: Do not export bdrv_first
The bdrv_first linked list of BlockDriverStates is currently extern so
that block migration can iterate the list.  However, since there is
already a bdrv_iterate() function there is no need to expose bdrv_first.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-23 16:21:57 +02:00
Liran Schour 889ae39c9a Try not to exceed max downtime on stage3
Move to stage3 only when remaining work can be done below max downtime.
Use qemu_get_clock_ns for measuring read performance.

Signed-off-by: Liran Schour <lirans@il.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-09 16:56:14 -06:00
Liran Schour d76cac7dfb Tranfer dirty blocks during iterative phase
Start transfer dirty blocks during the iterative stage. That will
reduce the time that the guest will be suspended

Signed-off-by: Liran Schour <lirans@il.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-09 16:56:14 -06:00
Liran Schour e970ec0b5e Remove unused code
blk_mig_save_bulked_block is never called with sync flag. Remove the sync
flag. Calculate bulk completion during blk_mig_save_bulked_block.
Remove unused constants.

Signed-off-by: Liran Schour <lirans@il.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-09 16:56:13 -06:00
malc d0f2c4c602 Do not use dprintf
dprintf is already claimed by POSIX[1], and on at least one system
is implemented as a macro

[1] http://www.opengroup.org/onlinepubs/9699919799/functions/dprintf.html

Signed-off-by: malc <av1474@comtv.ru>
2010-02-07 02:03:50 +03:00
Jan Kiszka 792773b225 block migration: Skip zero-sized disks
No need to migrate emptiness (risking divide by zero later on).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 11:45:39 -06:00
Jan Kiszka 01e61e2d16 block migration: Add support for restore progress reporting
Inject progress report in percentage into the block live stream. This
can be read out and displayed easily on restore.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:54 -06:00
Jan Kiszka 25f236433f block migration: Report progress also via info migration
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:53 -06:00
Jan Kiszka 7184049ee6 block migration: Fix outgoing progress output
Report progress of an outgoing live migration to the monitor instead of
stdout.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:53 -06:00
Jan Kiszka f327aa0c60 live migration: Propagate output monitor to callback handler
In order to allow proper progress reporting to the monitor that
initiated the migration, forward the monitor reference through the
migration layer down to SaveLiveStateHandler.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:53 -06:00
Jan Kiszka 82801d8f4f block migration: Report overall migration progress
So far progress reporting only works for the first block device. Fix
this by keeping an overall sum of sectors to be migratated, calculating
the sum of all processed sectors, and finally basing the progress
display on those values.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:53 -06:00
Jan Kiszka 4ec7fcc7da live migration: Allow cleanup after cancellation or error
Introduce qemu_savevm_state_cancel and inject a stage -1 to cancel a
live migration. This gives the involved subsystems a chance to clean up
dynamically allocated resources. Namely, the block migration layer can
now free its device descriptors and pending blocks.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:53 -06:00
Jan Kiszka 4b640365c7 block migration: Add error handling/propagation
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:53 -06:00
Jan Kiszka 13f0b67fd3 block migration: Consolidate block transmission
Based on the original patch by Pierre Riteau: Use a common blk_send
function to transmit a block.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:53 -06:00
Jan Kiszka 57cce12d54 block migration: Consolidate mig_read_device_bulk into mig_save_device_bulk
Both functions share a lot of code, so make them one.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:53 -06:00
Jan Kiszka b1d10856d6 block migration: Clean up use of total_sectors
We already save total_sectors in BlkMigDevState, let's use this value
during the migration and avoid to recalculate it needlessly.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:53 -06:00
Jan Kiszka 69d63a97a1 block migration: Initialize remaining BlkMigState fields
In case we restart a migration, submitted, read_done, transferred, and
print_completion need to be reinitialized to 0.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:52 -06:00
Jan Kiszka 5e5328be14 block migration: Switch device and block lists to QSIMPLEQ
Based on the original patch by Pierre Riteau.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:52 -06:00