Rather than requiring all flat unions to explicitly create
a separate base struct, we can allow the qapi schema to specify
the common members via an inline dictionary. This is similar to
how commands can specify an inline anonymous type for its 'data'.
We already have several struct types that only exist to serve as
a single flat union's base; the next commit will clean them up.
In particular, this patch's change to the BlockdevOptions example
in qapi-code-gen.txt will actually be done in the real QAPI schema.
Now that anonymous bases are legal, we need to rework the
flat-union-bad-base negative test (as previously written, it
forms what is now valid QAPI; tweak it to now provide coverage
of a new error message path), and add a positive test in
qapi-schema-test to use an anonymous base (making the integer
argument optional, for even more coverage).
Note that this patch only allows anonymous bases for flat unions;
simple unions are already enough syntactic sugar that we do not
want to burden them further. Meanwhile, while it would be easy
to also allow an anonymous base for structs, that would be quite
redundant, as the members can be put right into the struct
instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-15-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Although we don't want to repeat the entire BlockdevOptions
QMP command in the example, it helps if we aren't needlessly
diverging (the initial example was written before we had
committed the actual QMP interface). Use names that match what
is found in qapi/block-core.json, such as '*read-only' rather
than 'readonly', or 'BlockdevRef' rather than 'BlockRef'.
For the simple union example, invent BlockdevOptionsSimple so
that later text is unambiguous which of the two union forms is
meant (telling the user to refer back to two 'BlockdevOptions'
wasn't nice, and QMP has only the flat union form).
Also, mention that the discriminator of a flat union is
non-optional.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-14-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we are always bulk-initializing a QAPI C struct to 0
(whether by g_malloc0() or by 'Type arg = {0};'), we no longer
have any clients of c_null() in the generator for per-element
initialization. This patch is easy enough to revert if we find
a use in the future, but in the present, get rid of the dead code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-12-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 82ca8e46 noticed that we had multiple implementations of
visiting every member of a struct, and consolidated it into
gen_visit_fields() (now gen_visit_members()) with enough
parameters to cater to slight differences between the clients.
But recent exposure of implicit types has meant that we are now
down to a single use of that method, so we can clean up the
unused conditionals and just inline it into the remaining
caller: gen_visit_object_members().
Likewise, gen_err_check() no longer needs optional parameters,
as the lone use of non-defaults was via gen_visit_members().
No change to generated code.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-11-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Originally, gen_marshal_input_visit() (or gen_visitor_input_block()
before commit f1538019) was factored out to make it easy to do two
passes of a visit to each member of a (possibly-implicit) object,
without duplicating lots of code. But after recent changes, those
visits now occupy a single line of emitted code, and the helper
method has become a series of conditionals both before and after
the one important line, making it rather awkward to see at a glance
what gets emitted on the first (parsing) or second (deallocation)
pass. It's a lot easier to read the generator code if we just
inline both uses directly into gen_marshal(), without all the
conditionals.
Once we've done that, it's easy to notice that gen_marshal_vars()
is used only once, and inlining it too lets us consolidate some
mcgen() calls that used to be split across helpers.
gen_call() remains a single-use helper function, but it has
enough indentation and complexity that inlining it would hamper
legibility.
No change to generated output. The fact that the diffstat shows
a net reduction in lines is an argument in favor of this cleanup.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-10-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than generate inline per-member visits, take advantage
of the 'visit_type_FOO_members()' function for command
marshalling. This is possible now that implicit structs can be
visited like any other. Generate call arguments from a stack-
allocated struct, rather than a list of local variables:
|@@ -57,26 +57,15 @@ void qmp_marshal_add_fd(QDict *args, QOb
| QmpInputVisitor *qiv = qmp_input_visitor_new_strict(QOBJECT(args));
| QapiDeallocVisitor *qdv;
| Visitor *v;
|- bool has_fdset_id = false;
|- int64_t fdset_id = 0;
|- bool has_opaque = false;
|- char *opaque = NULL;
|+ q_obj_add_fd_arg arg = {0};
|
| v = qmp_input_get_visitor(qiv);
|- if (visit_optional(v, "fdset-id", &has_fdset_id)) {
|- visit_type_int(v, "fdset-id", &fdset_id, &err);
|- if (err) {
|- goto out;
|- }
|- }
|- if (visit_optional(v, "opaque", &has_opaque)) {
|- visit_type_str(v, "opaque", &opaque, &err);
|- if (err) {
|- goto out;
|- }
|+ visit_type_q_obj_add_fd_arg_members(v, &arg, &err);
|+ if (err) {
|+ goto out;
| }
|
|- retval = qmp_add_fd(has_fdset_id, fdset_id, has_opaque, opaque, &err);
|+ retval = qmp_add_fd(arg.has_fdset_id, arg.fdset_id, arg.has_opaque, arg.opaque, &err);
| if (err) {
| goto out;
| }
|@@ -88,12 +77,7 @@ out:
| qmp_input_visitor_cleanup(qiv);
| qdv = qapi_dealloc_visitor_new();
| v = qapi_dealloc_get_visitor(qdv);
|- if (visit_optional(v, "fdset-id", &has_fdset_id)) {
|- visit_type_int(v, "fdset-id", &fdset_id, NULL);
|- }
|- if (visit_optional(v, "opaque", &has_opaque)) {
|- visit_type_str(v, "opaque", &opaque, NULL);
|- }
|+ visit_type_q_obj_add_fd_arg_members(v, &arg, NULL);
| qapi_dealloc_visitor_cleanup(qdv);
| }
This also has the nice side effect of eliminating a chance of
collision between argument QMP names and local variables.
This patch also paves the way for some followup simplifications
in the generator, in subsequent patches.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-9-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than generate inline per-member visits, take advantage
of the 'visit_type_FOO_members()' function for emitting events.
This is possible now that implicit structs can be visited like
any other. Generated code shrinks accordingly; by initializing
a struct based on parameters, through a new gen_param_var()
helper, like:
|@@ -338,6 +250,9 @@ void qapi_event_send_block_job_error(con
| QMPEventFuncEmit emit = qmp_event_get_func_emit();
| QmpOutputVisitor *qov;
| Visitor *v;
|+ q_obj_BLOCK_JOB_ERROR_arg param = {
|+ (char *)device, operation, action
|+ };
|
| if (!emit) {
| return;
@@ -351,19 +266,7 @@ void qapi_event_send_block_job_error(con
| if (err) {
| goto out;
| }
|- visit_type_str(v, "device", (char **)&device, &err);
|- if (err) {
|- goto out_obj;
|- }
|- visit_type_IoOperationType(v, "operation", &operation, &err);
|- if (err) {
|- goto out_obj;
|- }
|- visit_type_BlockErrorAction(v, "action", &action, &err);
|- if (err) {
|- goto out_obj;
|- }
|-out_obj:
|+ visit_type_q_obj_BLOCK_JOB_ERROR_arg_members(v, ¶m, &err);
| visit_end_struct(v, err ? NULL : &err);
Notice that the initialization of 'param' has to cast away const
(just as the old gen_visit_members() had to do): we can't change
the signature of the user function (which uses 'const char *'), but
have to assign it to a non-const QAPI object (which requires
'char *').
While touching this, document with a FIXME comment that there is
still a potential collision between QMP members and our choice of
local variable names within qapi_event_send_FOO().
This patch also paves the way for some followup simplifications
in the generator, in subsequent patches.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-8-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We already have several places that want to visit all the members
of an implicit object within a larger context (simple union variant,
event with anonymous data, command with anonymous arguments struct);
and will be adding another one soon (the ability to declare an
anonymous base for a flat union). Having a C struct declared for
these implicit types, along with a visit_type_FOO_members() helper
function, will make for fewer special cases in our generator.
We do not, however, need qapi_free_FOO() or visit_type_FOO()
functions for implicit types, because they should not be used
directly outside of the generated code. This is done by adding a
conditional in visit_object_type() for both qapi-types.py and
qapi-visit.py based on the object name. The comparison of
"name.startswith('q_')" is a bit hacky (it's basically duplicating
what .is_implicit() already uses), but beats changing the signature
of the visit_object_type() callback to pass a new 'implicit' flag.
The hack should be temporary: we are considering adding a future
patch that consolidates the narrow visit_object_type(..., base,
local_members, variants) and visit_object_type_flat(...,
all_members, variants) [where different sets of information are
already broken out, and the QAPISchemaObjectType is no longer
available] into a broader visit_object_type(obj_type) [where the
visitor can query the needed fields from obj_type directly].
Also, now that we WANT to output C code for implicits, we no longer
need the visit_needed() filter, leaving 'q_empty' as the only object
still needing a special case. Remember, 'q_empty' is the only
built-in generated object, which means that without a special case
it would be emitted in multiple files (the main qapi-types.h and in
qga-qapi-types.h) causing compilation failure due to redefinition.
But since it has no members, it's easier to just avoid an attempt to
visit that particular type; since gen_object() is called recursively,
we also prime the objects_seen set to cover any recursion into the
empty type.
The patch relies on the changed naming of implicit types in the
previous patch. It is a bit unfortunate that the generated struct
names and visit_type_FOO_members() don't match normal naming
conventions, but it's not too bad, since they will only be used in
generated code.
The generated code grows substantially in size: the implicit
'-wrapper' types must be emitted in qapi-types.h before any union
can include an unboxed member of that type. Arguably, the '-args'
types could be emitted in a private header for just qapi-visit.c
and qmp-marshal.c, rather than polluting qapi-types.h; but adding
complexity to the generator to split the output location according
to role doesn't seem worth the maintenance costs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The original choice of ':obj-' as the prefix for implicit types
made it obvious that we weren't going to clash with any user-defined
names, which cannot contain ':'. But now we want to create structs
for implicit types, to get rid of special cases in the generators,
and our use of ':' in implicit names needs a tweak to produce valid
C code.
We could transliterate ':' to '_', except that C99 mandates that
"identifiers that begin with an underscore are always reserved for
use as identifiers with file scope in both the ordinary and tag name
spaces". So it's time to change our naming convention: we can
instead use the 'q_' prefix that we reserved for ourselves back in
commit 9fb081e0. Technically, since we aren't planning on exposing
the empty type in generated code, we could keep the name ':empty',
but renaming it to 'q_empty' makes the check for startswith('q_')
cover all implicit types, whether or not code is generated for them.
As long as we don't declare 'empty' or 'obj' ticklish, it shouldn't
clash with c_name() prepending 'q_' to the user's ticklish names.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-5-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaType.c_type() is a bit awkward: it takes two optional
boolean flags is_param and is_unboxed, and they should never both
be True.
Add a new method for each of the flags, and drop the flags from
c_type().
Most callers pass no flags; they remain unchanged.
One caller passes is_param=True; call the new .c_param_type()
instead.
One caller passes is_unboxed=True, except for simple union types.
This is actually an ugly special case that will go away soon, so
until then, we now have to call either .c_type() or the new
.c_unboxed_type(). Tolerable in the interim.
It requires slightly more Python, but is arguably easier to read.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The generator special-cased
{ 'command':'foo', 'data': {} }
to avoid emitting a visitor variable, but failed to see that
{ 'struct':'NamedEmptyType, 'data': {} }
{ 'command':'foo', 'data':'NamedEmptyType' }
needs the same treatment. There, the generator happily generates a
visitor to get no arguments, and a visitor to destroy no arguments;
and the compiler isn't happy with that, as demonstrated by the updated
qapi-schema-test.json:
tests/test-qmp-marshal.c: In function ‘qmp_marshal_user_def_cmd0’:
tests/test-qmp-marshal.c:264:14: error: variable ‘v’ set but not used [-Werror=unused-but-set-variable]
Visitor *v;
^
No change to generated code except for the testsuite addition.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-3-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We are getting closer to the point where we could use one union
as the base or variant type within another union type (as long
as there are no collisions between any possible combination of
member names allowed across all discriminator choices). But
until we get to that point, it is worth asserting that variants
are not present in places where we are not prepared to handle
them: when exploding a type into a parameter list, we do not
expect variants. The qapi.py code is already checking this,
via the older check_type() method; but someday we hope to get
rid of that and move checking into QAPISchema*.check(). The
two asserts added here make sure any refactoring still catches
problems, and makes it locally obvious why we can iterate over
only type.members without worrying about type.variants.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=OfzG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Thu 17 Mar 2016 15:49:29 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (29 commits)
iotests: Test QUORUM_REPORT_BAD in fifo mode
quorum: Emit QUORUM_REPORT_BAD for reads in fifo mode
block: Use blk_co_pwritev() in blk_co_write_zeroes()
block: Use blk_aio_prwv() for aio_read/write/write_zeroes
block: Use blk_prw() in blk_pread()/blk_pwrite()
block: Use blk_co_pwritev() in blk_write_zeroes()
block: Pull up blk_read_unthrottled() implementation
block: Use blk_co_pwritev() for blk_write()
block: Use blk_co_preadv() for blk_read()
block: Use BdrvChild in BlockBackend
block: Remove bdrv_states list
block: Use bdrv_next() instead of bdrv_states
block: Rewrite bdrv_next()
block: Add blk_next_root_bs()
block: Add bdrv_next_monitor_owned()
block: Move some bdrv_*_all() functions to BB
blockdev: Remove blk_hide_on_behalf_of_hmp_drive_del()
blockdev: Split monitor reference from BB creation
blockdev: Separate BB name management
blockdev: Add list of all BlockBackends
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW6tDLAAoJEDuxQgLoOKytAisH/3nPs+SCVD9Vd936wx0o1+dG
2sWwR2QirfbK98+/XGIuW77qXzsrKbaku+KqCvQ8/R6zTKENblEm+EJuCqcvif/f
6SktylvNlyKPuKFqCY9mHbaC2tiFYUsmH50afrMegu0dO9ZM4DnRcgAqJKrGeHVr
U3kbLjmTYnciv3YJ4YgWyKkY++IuZXT0ElS2lasOxPa8ntQhFSQgRWdjQE0RZyEC
wB5gJQYtwOdc6++Y/cGQgnoY/Nz24ggAnQ3OaDJSH4GdWjNUKn02KaZhcBw+MgfU
lnfTFpPJ57htWuP3Pbi69dh+qpdkU9U+wD6TXecrnLdAovUf8m+/M/x76LvU9ro=
=nG9k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-03-17-v2' into queue-block
Two quorum patches for the block queue, v2.
# gpg: Signature made Thu Mar 17 16:44:11 2016 CET using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2016-03-17-v2:
iotests: Test QUORUM_REPORT_BAD in fifo mode
quorum: Emit QUORUM_REPORT_BAD for reads in fifo mode
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If there's an I/O error in one of Quorum children then QEMU
should emit QUORUM_REPORT_BAD. However this is not working with
read-pattern=fifo. This patch fixes this problem.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: d57e39e8d3e8564003a1e2aadbd29c97286eb2d2.1458034554.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch introduces blk_co_preadv() as a central function on the
BlockBackend level that is supposed to handle all read requests from the
BB to its root BDS eventually.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no point in manually iterating through the bdrv_states list
when there is bdrv_next().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of using the bdrv_states list, iterate over all the
BlockDriverStates attached to BlockBackends, and over all the
monitor-owned BDSs afterwards (except for those attached to a BB).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function iterates over all BDSs attached to a BB. We are going to
need it when rewriting bdrv_next() so it no longer uses bdrv_states.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a function for iterating over all monitor-owned BlockDriverStates so
the generic block layer can do so.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move bdrv_commit_all() and bdrv_flush_all() to the BlockBackend level.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can basically inline it in hmp_drive_del(); monitor_remove_blk() is
called already, so we just need to call bdrv_make_anon(), too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before this patch, blk_new() automatically assigned a name to the new
BlockBackend and considered it referenced by the monitor. This patch
removes the implicit monitor_add_blk() call from blk_new() (and
consequently the monitor_remove_blk() call from blk_delete(), too) and
thus blk_new() (and related functions) no longer take a BB name
argument.
In fact, there is only a single point where blk_new()/blk_new_open() is
called and the new BB is monitor-owned, and that is in blockdev_init().
Besides thus relieving us from having to invent names for all of the BBs
we use in qemu-img, this fixes a bug where qemu cannot create a new
image if there already is a monitor-owned BB named "image".
If a BB and its BDS tree are created in a single operation, as of this
patch the BDS tree will be created before the BB is given a name
(whereas it was the other way around before). This results in minor
change to the output of iotest 087, whose reference output is amended
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce separate functions (monitor_add_blk() and
monitor_remove_blk()) which set or unset a BB name. Since the name is
equivalent to the monitor's reference to a BB, adding a name the same as
declaring the BB to be monitor-owned and removing it revokes this
status, hence the function names.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While monitor_block_backends contains nearly all BBs, we sometimes
really need all BBs. To this end, this patch adds the block_backend
list.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The blk_backends list does not contain all BlockBackends but only the
ones which are referenced by the monitor, and that is not necessarily
true for every BlockBackend. Rename the list to monitor_block_backends
to make that fact clear.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The information which BB is concerned does not seem useful enough to
justify its existence in most other place (which may be related to qemu
printing the -drive parameter in question anyway, and for blockdev-add
the attribution is naturally unambiguous). Furthermore, as of a future
patch, bdrv_get_device_name(bs) will always return the empty string
before bdrv_open_inherit() returns.
Therefore, just dropping that information seems to be the best course of
action.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just specifying a custom string is simpler in basically all places that
used it, and in addition, specifying the BB or node name is something we
generally do not do in other error messages when opening a BDS, so we
should not do it here.
This changes the output for iotest 036 (to the better, in my opinion),
so the reference output needs to be changed accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace bdrv_commmit_all() and bdrv_flush_all() by their BlockBackend
equivalents.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Later, we will remove bdrv_commit_all() and move its contents here, and
in order to replace bdrv_commit_all() calls by calls to blk_commit_all()
before doing so, we need to add it as an alias now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of iterating directly through blk_backends, we can use
blk_next() instead. This gives us some abstraction from the list itself
which we can use to rename it, for example.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
hmp_drive_add_node() leaked qdict in the error path when no node-name is
specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This reverts commit df9a681dc9.
Note that commit df9a681dc9 included some
unrelated hunks, possibly due to a merge failure or an overlooked
squash. This only reverts the qed .bdrv_drain() implementation.
The qed .bdrv_drain() implementation is unsafe and can lead to a double
request completion.
Paolo Bonzini reports:
"The problem is that bdrv_qed_drain calls qed_plug_allocating_write_reqs
unconditionally, but this is not correct if an allocating write is
queued. In this case, qed_unplug_allocating_write_reqs will restart the
allocating write and possibly cause it to complete. The aiocb however
is still in use for the L2/L1 table writes, and will then be completed
again as soon as the table writes are stable."
For QEMU 2.6 we can simply revert this commit. A full solution for the
qed need check timer may be added if the bdrv_drain() implementation is
extended.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1457431876-8475-1-git-send-email-stefanha@redhat.com
CONFIG_EPOLL was being used to guard epoll_create1 which results
in build failures on CentOS 5.
Signed-off-by: Matthew Fortune <matthew.fortune@imgtec.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 6D39441BF12EF246A7ABCE6654B023536BB85D08@hhmail02.hh.imgtec.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The only remaining users of machine_init() only call
qemu_add_opts(). Rename machine_init() to opts_init() and move it
closer to the qemu_add_opts() calls on vl.c.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
