The v8.4-RCPC extension implements some new instructions:
* LDAPUR, LDAPURB, LDAPURH, LDAPRSB, LDAPRSH, LDAPRSW
* STLUR, STLURB, STLURH
These are all in a new subgroup of encodings that sits below the
top-level "Loads and Stores" group in the Arm ARM.
The STLUR* instructions have standard store-release semantics; the
LDAPUR* have Load-AcquirePC semantics, but (as with LDAPR*) we choose
to implement them as the slightly stronger Load-Acquire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224172846.13053-4-peter.maydell@linaro.org
The v8.3-RCPC extension implements three new load instructions
which provide slightly weaker consistency guarantees than the
existing load-acquire operations. For QEMU we choose to simply
implement them with a full LDAQ barrier.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224172846.13053-3-peter.maydell@linaro.org
Use isar feature tests instead of feature bit tests.
Although none of QEMUs current cpus have VFPv3 without D32,
replace the large comment explaining why with one line that
sets ARM_HWCAP_ARM_VFPv3D16 under the correct conditions.
Mirror the test sequence used in the linux kernel.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enforce a convention that an isar_feature function that tests a
32-bit ID register always has _aa32_ in its name, and one that
tests a 64-bit ID register always has _aa64_ in its name.
We already follow this except for three cases: thumb_div,
arm_div and jazelle, which all need _aa32_ adding.
(As noted in the comment, isar_feature_aa32_fp16_arith()
is an exception in that it currently tests ID_AA64PFR0_EL1,
but will switch to MVFR1 once we've properly implemented
FP16 for AArch32.)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-2-peter.maydell@linaro.org
With bad luck, we can wind up with no space at all for brk,
which will generally cause the guest malloc to fail.
This bad luck is easier to come by with ET_DYN (PIE) binaries,
where either the stack or the interpreter (ld.so) gets placed
immediately after the main executable.
But there's nothing preventing this same thing from happening
with ET_EXEC (normal) binaries, during probe_guest_base().
In both cases, reserve some extra space via mmap and release
it back to the system after loading the interpreter and
allocating the stack.
The choice of 16MB is somewhat arbitrary. It's enough for libc
to get going, but without being so large that 32-bit guests or
32-bit hosts are in danger of running out of virtual address space.
It is expected that libc will be able to fall back to mmap arenas
after the limited brk space is exhausted.
Launchpad: https://bugs.launchpad.net/qemu/+bug/1749393
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200117230245.5040-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In init_guest_space, we need to mmap guest space. If the return address
of first mmap is not aligned with align, which was set to MAX(SHMLBA,
qemu_host_page_size), we need unmap and a new mmap(space is larger than
first size). The new size is named real_size, which is aligned_size +
qemu_host_page_size. alugned_size is the guest space size. And add a
qemu_host_page_size to avoid memory error when we align real_start
manually (ROUND_UP(real_start, align)). But when SHMLBA >
qemu_host_page_size, the added size will smaller than the size to align,
which can make a mistake(in a mips machine, it appears). So change
real_size from aligned_size +qemu_host_page_size
to aligned_size + align will solve it.
Signed-off-by: Xinyu Li <precinct@mail.ustc.edu.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191213022919.5934-1-precinct@mail.ustc.edu.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
ARMv8.2 introduced support for Data Cache Clean instructions
to PoP (point-of-persistence) - DC CVAP and PoDP (point-of-deep-persistence)
- DV CVADP. Both specify conceptual points in a memory system where all writes
that are to reach them are considered persistent.
The support provided considers both to be actually the same so there is no
distinction between the two. If none is available (there is no backing store
for given memory) both will result in Data Cache Clean up to the point of
coherency. Otherwise sync for the specified range shall be performed.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191121000843.24844-5-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is needed to support debugging PIE ELF binaries running under QEMU
user mode. Currently, `code_offset` and `data_offset` remain unset for
all ELF binaries, so GDB is unable to correctly locate the position of
the binary's text and data.
The fields `code_offset`, and `data_offset` were originally added way
back in 2006 to support debugging of bFMT executables (978efd6aac),
and support was just never added for ELF. Since non-PIE binaries are
loaded at exactly the address specified in the binary, GDB does not need
to relocate any symbols, so the buggy behavior is not normally observed.
http://sourceware.org/gdb/onlinedocs/gdb/General-Query-Packets.html#index-qOffsets-packet
Buglink: https://bugs.launchpad.net/qemu/+bug/1528239
Signed-off-by: Josh Kunz <jkz@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190816233422.16715-1-jkz@google.com>
[lv: added link to documentation]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add the HWCAP2_* bits from kernel version v5.3-rc3.
Enable the bits corresponding to ARMv8.5-CondM and ARMv8.5-FRINT.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190809171156.3476-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-20-armbru@redhat.com>
QEMU_PPC_FEATURE2_VEC_CRYPTO enables the use
of VSX instructions in libcrypto that are accelerated
by the TCG vector instructions now.
QEMU_PPC_FEATURE2_DARN allows to use the new builtin
qemu_guest_getrandom() function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190609143521.19374-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let's add all HWCAPs that we can support under TCG right now, when the
respective CPU facilities are enabled.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
For those hosts with SHMLBA > getpagesize, we don't automatically
select a guest address that is compatible with the host. We can
achieve this by boosting the alignment of guest_base and by adding
an extra alignment argument to mmap_find_vma.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190519201953.20161-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Sanitize interp_info structure in load_elf_binary() and, for MIPS only,
init its field fp_abi to MIPS_ABI_FP_UNKNOWN. This fixes appearances of
"Unexpected FPU mode" message in some MIPS use cases. Currently, this
bug is a complete stopper for some MIPS binaries.
In load_elf_binary(), struct image_info interp_info is used without
being properly initialized. One result is that when the ELF's program
header doesn't contain an entry for the ABI flags, then the value of
the struct image_info's fp_abi field is set to whatever happened to
be in stack memory at the time.
Backporting to 4.0 and, if possible, to 3.1 is recommended.
Fixes: https://bugs.launchpad.net/qemu/+bug/1825002
Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1558282527-22183-6-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use a better interface for random numbers than rand * 16.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Some PT_LOAD segments may be completely zeroed out and their p_filesize
is zero, in that case the loader should just allocate a page that's at
least p_memsz bytes large (plus eventual alignment padding).
Calling zero_bss does this job for us, all we have to do is make sure we
don't try to mmap a zero-length page.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190503122007.lkjsvztgt4ycovac@debian>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix this warning when building with GCC9 on Fedora 30:
In function ‘strncpy’,
inlined from ‘fill_psinfo’ at /home/alistair/qemu/linux-user/elfload.c:3208:12,
inlined from ‘fill_note_info’ at /home/alistair/qemu/linux-user/elfload.c:3390:5,
inlined from ‘elf_core_dump’ at /home/alistair/qemu/linux-user/elfload.c:3539:9:
/usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ specified bound 16 equals destination size [-Werror=stringop-truncation]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c4d2b1de9efadcf1c900b91361af9302823a72a9.1556666645.git.alistair.francis@wdc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The 32-bit kernel has strings for v4, v5, v6, v7, v7m.
The 64-bit kernel, in compat mode, has strings for v8.
Fixes: https://bugs.launchpad.net/bugs/1813034
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190212074840.13542-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190219222952.22183-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Userspace programs should (in theory) query the ELF HWCAP before
probing these registers. Now we have implemented them all make it
public.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190205190224.2198-6-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set fp_abi and interp_fp_abi values to current fp_abi value read from
MIPS.abiflags.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Read MIPS.abiflags section from ELF file into Mips_elf_abiflags_v0 struct.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both arm and thumb2 division are controlled by the same ISAR field,
which takes care of the arm implies thumb case. Having M imply
thumb2 division was wrong for cortex-m0, which is v6m and does not
have thumb2 at all, much less thumb2 division.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the v8 extensions are self-contained within the ISAR
registers and are not implied by other feature bits, which
makes them the easiest to convert.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the hostpage size is greater than the TARGET_PAGESIZE, the
target-pages of size TARGET_PAGESIZE are marked valid only till the
length requested during the elfload. The glibc attempts to consume unused
space in the last page of data segment(__libc_memalign() in
elf/dl-minimal.c). If PT_LOAD p_align is greater than or
equal to hostpage size, the GLRO(dl_pagesize) is actually the host pagesize
as set in the auxillary vectors. So, there is no explicit mmap request for
the remaining target-pages on the last hostpage. The glibc assumes that
particular space as available and subsequent attempts to use
those addresses lead to crash as the target_mmap has not marked them valid
for those target-pages.
The issue is seen when trying to chroot to 16.04-x86_64 ubuntu on a PPC64
host where the fork fails to access the thread_id as it is allocated on a
page not marked valid. The recent glibc doesn't have checks for thread-id in
fork, but the issue can manifest somewhere else, none the less.
The fix here is to map all the target-pages of the hostpage during the
elfload if the p_align is greater than or equal to hostpage size, for
data segment to allow the glibc for proper consumption.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <153553435604.51992.5640085189104207249.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This adds the HWCAP2 bit to detect if a linux user process is
running on an ISA 3.0 compliant cpu like POWER9. This can be
verified using a simple test program that prints the value in
the auxiliary vector for AT_HWCAP2 as shown below.
Before:
$ qemu-ppc64le -cpu power8 test
0x8c000000
$ qemu-ppc64le -cpu power9 test
0x8c000000
After:
$ qemu-ppc64le -cpu power8 test
0x8c000000
$ qemu-ppc64le -cpu power9 test
0x8c800000
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Starting from nanoMIPS introduction, machine variant can be
EM_MIPS or EM_NANOMIPS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
When we try to use some targets on ppc64, it can happen the target
doesn't support the host page size to align ELF load sections and
fails with:
ELF load command alignment not page-aligned
Since commit a70daba377 ("linux-user: Tell guest about big host
page sizes") the host page size is used to align ELF sections, but
this doesn't work if the alignment required by the load section is
smaller than the host one. For these cases, we continue to use the
TARGET_PAGE_SIZE instead of the host one.
I have tested this change on ppc64, and it fixes qemu linux-user for:
s390x, m68k, i386, arm, aarch64, hppa
and I have tested it doesn't break the following targets:
x86_64, mips64el, sh4
mips and mipsel abort, but I think for another reason.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: fixed "info->alignment = 0"]
Message-Id: <20180716195349.29959-1-laurent@vivier.eu>
We've already added the helpers with an SVE patch, all that remains
is to wire up the aa64 and aa32 translators. Enable the feature
within -cpu max for CONFIG_USER_ONLY.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable ARM_FEATURE_SVE for the generic "max" cpu.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The insns in the ARMv8.1-Atomics are added to the existing
load/store exclusive and load/store reg opcode spaces.
Rearrange the top-level decoders for these to accomodate.
The Atomics insns themselves still generate Unallocated.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-8-richard.henderson@linaro.org
[PMM: Drop the ARM_FEATURE_V8_1 feature flag]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add FDPIC info into image_info structure since interpreter info is on
stack and needs to be saved to be accessed later on.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-4-christophe.lyon@st.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to avoid code disabled by default, because it ends up less
tested. This patch removes all instances of #ifdef CONFIG_USE_FDPIC,
most of which can be safely kept. For the ones that should be
conditionally executed, we define elf_is_fdpic(). Without this patch,
defining CONFIG_USE_FDPIC would prevent QEMU from building precisely
because elf_is_fdpic is not defined.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-2-christophe.lyon@st.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add support for the two currently defined HWCAP bits on MIPS - R6 and
MSA.
Buglink: https://bugs.launchpad.net/qemu/+bug/1754372
Signed-off-by: James Cowgill <james.cowgill@mips.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180315151348.6451-1-james.cowgill@mips.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
At a fixed distance after the usable memory that init_guest_space maps, for
32-bit ARM targets we also need to map a commpage. The normal
init_guest_space logic doesn't keep this in mind when searching for an
address range.
If !host_start, then try to find a big continuous segment where we can put
both the usable memory and the commpage; we then munmap that segment and
set current_start to that address; and let the normal code mmap the usable
memory and the commpage separately. That is: if we don't have hint of
where to start looking for memory, come up with one that is better than
NULL. Depending on host_size and guest_start, there may or may not be a
gap between the usable memory and the commpage, so this is slightly more
restrictive than it needs to be; but it's only a hint, so that's OK.
We only do that for !host start, because if host_start, then either:
- we got an address passed in with -B, in which case we don't want to
interfere with what the user said;
- or host_start is based off of the ELF image's loaddr. The check "if
(host_start && real_start != current_start)" suggests that we really
want lowest available address that is >= loaddr. I don't know why that
is, but I'm trusting that Paul Brook knew what he was doing when he
wrote the original version of that check in
c581deda32 way back in 2010.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-11-lukeshu@lukeshu.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- small cleanup for xtensa registers dumping (-d cpu);
- add support for debugging linux-user process with xtensa-linux-gdb
(as opposed to xtensa-elf-gdb), which can only access unprivileged
registers;
- enable MTTCG for target/xtensa;
- cleanup in linux-user/mmap area making sure that it works correctly
with limited 30-bit-wide user address space;
- import xtensa-specific definitions from the linux kernel,
conditionalize user-only/softmmu-only code and add handlers for
signals, exceptions, process/thread creation and core registers dumping.
-----BEGIN PGP SIGNATURE-----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=UCny
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xtensa/tags/20180316-xtensa' into staging
target/xtensa linux-user support.
- small cleanup for xtensa registers dumping (-d cpu);
- add support for debugging linux-user process with xtensa-linux-gdb
(as opposed to xtensa-elf-gdb), which can only access unprivileged
registers;
- enable MTTCG for target/xtensa;
- cleanup in linux-user/mmap area making sure that it works correctly
with limited 30-bit-wide user address space;
- import xtensa-specific definitions from the linux kernel,
conditionalize user-only/softmmu-only code and add handlers for
signals, exceptions, process/thread creation and core registers dumping.
# gpg: Signature made Fri 16 Mar 2018 16:46:19 GMT
# gpg: using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044
* remotes/xtensa/tags/20180316-xtensa:
MAINTAINERS: fix W: address for xtensa
qemu-binfmt-conf.sh: add qemu-xtensa
target/xtensa: add linux-user support
linux-user: drop unused target_msync function
linux-user: fix target_mprotect/target_munmap error return values
linux-user: fix assertion in shmdt
linux-user: fix mmap/munmap/mprotect/mremap/shmat
target/xtensa: support MTTCG
target/xtensa: use correct number of registers in gdbstub
target/xtensa: mark register windows in the dump
target/xtensa: dump correct physical registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# linux-user/syscall.c
Import list of syscalls from the kernel source. Conditionalize code/data
that is only used with softmmu. Implement exception handlers. Implement
signal hander (only the core registers for now, no coprocessors or TIE).
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Lirong Yuan
Peter Maydell
Richard Henderson
Xinyu Li
Beata Michalska
Josh Kunz
Markus Armbruster
Laurent Vivier
David Hildenbrand
Daniel Santos
Giuseppe Musacchio
Alistair Francis
Alex Bennée
Paolo Bonzini
Stefan Markovic
Shivaprasad G Bhat
Sandipan Das
Aleksandar Markovic
Christophe Lyon
James Cowgill
Luke Shumaker
Max Filippov