These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The command is not implemented correctly yet. The documentation allows
to not pass any value to set, in which case the time is re-read from
RTC. However, reading CMOS on Windows is not trivial to implement. So
instead of pretending we've set the correct time, fail explicitly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For memory block command, we only support for linux with sysfs.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Introduce three new guest commands:
guest-get-memory-blocks, guest-set-memory-blocks, guest-get-memory-block-size.
With these three commands, we can support online/offline guest's memory block
(logical memory hotplug/unplug) as required from host.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*generalized guest-get-memory-block-size to get-get-memory-block-info
for future extensibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The following commands are implemented:
- guest_file_open
- guest_file_close
- guest_file_write
- guest_file_read
- guest_file_seek
- guest_file_flush
Motivation is quite simple: Windows guests should be supported with the
same set of features as Linux one. Also this patch is a prerequisite for
Windows guest-exec command support.
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add a new 'guest-set-user-password' command for changing the password
of guest OS user accounts. This command is needed to enable OpenStack
to support its API for changing the admin password of guests running
on KVM/QEMU. It is not practical to provide a command at the QEMU
level explicitly targetting administrator account password change
only, since different guest OS have different names for the admin
account. While UNIX systems use 'root', Windows systems typically
use 'Administrator' and even that can be renamed. Higher level apps
like OpenStack have the ability to figure out the correct admin
account name since they have info that QEMU/libvirt do not.
The command accepts either the clear text password string, encoded
in base64 to make it 8-bit safe in JSON:
$ echo -n "123456" | base64
MTIzNDU2
$ virsh -c qemu:///system qemu-agent-command f21x86_64 \
'{ "execute": "guest-set-user-password",
"arguments": { "crypted": false,
"username": "root",
"password": "MTIzNDU2" } }'
{"return":{}}
Or a password that has already been run though a crypt(3) like
algorithm appropriate for the guest, again then base64 encoded:
$ echo -n '$6$n01A2Tau$e...snip...DfMOP7of9AJ1I8q0' | base64
JDYkb...snip...YT2Ey
$ virsh -c qemu:///system qemu-agent-command f21x86_64 \
'{ "execute": "guest-set-user-password",
"arguments": { "crypted": true,
"username": "root",
"password": "JDYkb...snip...YT2Ey" } }'
NB windows support is desirable, but not implemented in this
patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently management softwares cannot know whether a qemu-ga command is
supported or not on the running platform until they actually execute it.
This patch disables unsupported commands at launch time of qemu-ga, so that
management softwares can check whether they are supported from 'enabled'
property of the result from 'guest-info' command.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add command to get mounted filesystems information in the guest.
The returned value contains a list of mountpoint paths and
corresponding disks info such as disk bus type, drive address,
and the disk controllers' PCI addresses, so that management layer
such as libvirt can resolve the disk backends.
For example, when `lsblk' result is:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb 8:16 0 1G 0 disk
`-sdb1 8:17 0 1024M 0 part
`-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test
sdc 8:32 0 1G 0 disk
`-sdc1 8:33 0 512M 0 part
`-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test
vda 252:0 0 25G 0 disk
`-vda1 252:1 0 25G 0 part /
where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1,
sdc is an IDE disk with PCI controller 0000:00:01.1, and
vda is a virtio-blk disk with PCI device 0000:00:06.0,
guest-get-fsinfo command will return the following result:
{"return":
[{"name":"dm-1",
"mountpoint":"/mnt/test",
"disk":[
{"bus-type":"scsi","bus":0,"unit":1,"target":0,
"pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}},
{"bus-type":"ide","bus":0,"unit":0,"target":0,
"pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}],
"type":"xfs"},
{"name":"vda1", "mountpoint":"/",
"disk":[
{"bus-type":"virtio","bus":0,"unit":0,"target":0,
"pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}],
"type":"ext4"}]}
In Linux guest, the disk information is resolved from sysfs. So far,
it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86
hosts, and "disk" parameter may be empty for unsupported disk types.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
*updated schema to report 2.2 as initial supported version
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If an array of mount point paths is specified as 'mountpoints' argument
of guest-fsfreeze-freeze-list, qemu-ga will only freeze the file systems
mounted on specified paths in Linux guests. Otherwise, it works as the
same way as guest-fsfreeze-freeze.
This would be useful when the host wants to create partial disk snapshots.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*updated schema to report 2.2 as initial supported version
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
token should be closed in all conditions.
So move CloseHandle(token) to "out" branch.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
acquire_privilege(), execute_async() and check_suspend_mode() do
nothing when called with an error set. Callers shouldn't do that, and
no caller does. Drop the superfluous tests.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
The error_is_set(errp) in the guest agent command handler functions
are merely fragile, because all chall chains (do_qmp_dispatch() via
the generated marshalling functions) pass a non-null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
As the description to the guest-set-time states, the command is
there to ease time synchronization after resume. If guest was
suspended for longer period of time, its system time can go off
so badly, that even NTP refuses to set it. That's why the command
was invented: to give users chance to set the time (not
necessarily 100% correct). However, there's is no real need for
us to require users to pass an arbitrary time. Especially if we
can read the correct value from RTC (boiling down to reading
host's time). Hence this commit enables logic:
guest-set-time() == guest-set-time($now_from_rtc)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Both code locations cause a compiler warning. Using "%s" instead of "%lu"
would result in a program crash if the wrong code were executed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1385409257-2522-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Support guest-fsfreeze-freeze and guest-fsfreeze-thaw commands for Windows
guests. When fsfreeze command is issued, it calls the VSS requester to
freeze filesystems and applications. On thaw command, it again tells the VSS
requester to thaw them.
This also adds calling of initialize functions for the VSS requester.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*added stub for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*added stub for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
FITRIM is a mounted filesystem feature to discard (or "trim") blocks which
are not in use by the filesystem. This is useful for solid-state drives
(SSDs) and thinly-provisioned storage. Provide access to the feature
from the host so that filesystems can be trimmed periodically or before
migration.
Here is an example using scsi_debug:
# modprobe scsi_debug lbpu=1 lbpws=1
# sg_vpd -p0xb2 /dev/sdb
Logical block provisioning VPD page (SBC):
Unmap command supported (LBPU): 1
Write same (16) with unmap bit supported (LBWS): 1
Write same (10) with unmap bit supported (LBWS10): 0
# mke2fs /dev/sdb
# cat /sys/bus/pseudo/drivers/scsi_debug/map
1-616,16257-16383
# mount /dev/sdb /run/media/pbonzini/test
# dd if=/dev/zero of=/run/media/pbonzini/test/file
# cat map
1-616,645-1588,1599-4026,4029-16383
# rm /run/media/pbonzini/test/file
# ./qemu-ga /dev/fd/0
{"execute":"guest-fstrim"}
{"return": {}}
# cat map
1-612
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This command returns an array of:
[ifname, hwaddr, [ipaddr, ipaddr_family, prefix] ]
for each interface in the system.
Currently, only IPv4 and IPv6 are supported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Implement guest-suspend-disk RPC for Windows. Functionally this should be
equivalent to the posix implementation.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
As the command name implies, this command suspends the guest to disk.
The suspend operation is implemented by two functions: bios_supports_mode()
and guest_suspend(). Both functions are generic enough to be used by
other suspend modes (introduced by next commits).
Both functions will try to use the scripts provided by the pm-utils
package if it's available. If it's not available, a manual method,
which consists of directly writing to '/sys/power/state', will be used.
To reap terminated children, a new signal handler is installed in the
parent to catch SIGCHLD signals and a non-blocking call to waitpid()
is done to collect their exit statuses. The statuses, however, are
discarded.
The approach used to query the guest for suspend support deserves some
explanation. It's implemented by bios_supports_mode() and shown below:
qemu-ga
|
create pipe
|
fork()
-----------------
| |
| |
| fork()
| --------------------------
| | |
| | |
| | exec('pm-is-supported')
| |
| wait()
| write exit status to pipe
| exit
|
read pipe
This might look complex, but the resulting code is quite simple.
The purpose of that approach is to allow qemu-ga to reap its children
(semi-)automatically from its SIGCHLD handler.
Implementing this the obvious way, that's, doing the exec() call from
the first child process, would force us to introduce a more complex way
to reap qemu-ga's children. Like registering PIDs to be reaped and
having a way to wait for them when returning their exit status to
qemu-ga is necessary. The approach explained above avoids that complexity.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Implement guest-shutdown RPC for Windows. Functionally this should be
equivalent to the posix implementation.
Original patch by Gal Hammer <ghammer@redhat.com>
Various stubs and #ifdefs to compile for Windows using mingw
cross-build. Still has 1 linker error due to a dependency on the
forthcoming win32 versions of the GAChannel/transport class.
