Commit Graph

252 Commits

Author SHA1 Message Date
Laurent Vivier 5166fe0ae4 qapi: net: add stream and dgram netdevs
Copied from socket netdev file and modified to use SocketAddress
to be able to introduce new features like unix socket.

"udp" and "mcast" are squashed into dgram netdev, multicast is detected
according to the IP address type.
"listen" and "connect" modes are managed by stream netdev. An optional
parameter "server" defines the mode (off by default)

The two new types need to be parsed the modern way with -netdev, because
with the traditional way, the "type" field of netdev structure collides with
the "type" field of SocketAddress and prevents the correct evaluation of the
command line option. Moreover the traditional way doesn't allow to use
the same type (SocketAddress) several times with the -netdev option
(needed to specify "local" and "remote" addresses).

The previous commit paved the way for parsing the modern way, but
omitted one detail: how to pick modern vs. traditional, in
netdev_is_modern().

We want to pick based on the value of parameter "type".  But how to
extract it from the option argument?

Parsing the option argument, either the modern or the traditional way,
extracts it for us, but only if parsing succeeds.

If parsing fails, there is no good option.  No matter which parser we
pick, it'll be the wrong one for some arguments, and the error
reporting will be confusing.

Fortunately, the traditional parser accepts *anything* when called in
a certain way.  This maximizes our chance to extract the value of
"type", and in turn minimizes the risk of confusing error reporting.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-28 13:28:52 +08:00
Daniel Henrique Barboza bf353ad555 qmp/hmp, device_tree.c: introduce dumpdtb
To save the FDT blob we have the '-machine dumpdtb=<file>' property.
With this property set, the machine saves the FDT in <file> and exit.
The created file can then be converted to plain text dts format using
'dtc'.

There's nothing particularly sophisticated into saving the FDT that
can't be done with the machine at any state, as long as the machine has
a valid FDT to be saved.

The 'dumpdtb' command receives a 'filename' parameter and, if the FDT is
available via current_machine->fdt, save it in dtb format to 'filename'.
In short, this is a '-machine dumpdtb' that can be fired on demand via
QMP/HMP.

This command will always be executed in-band (i.e. holding BQL),
avoiding potential race conditions with machines that might change the
FDT during runtime (e.g. PowerPC 'pseries' machine).

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-2-danielhb413@gmail.com>
2022-10-17 16:15:10 -03:00
Dr. David Alan Gilbert 22269b0436 hmp: Fix ordering of text
Fix the ordering of the help text so it's always after the commands
being defined.  A few had got out of order.  Keep 'info' at the end.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2022-09-15 14:13:30 +01:00
Hyman Huang(黄勇) f3b2e38cfb softmmu/dirtylimit: Implement dirty page rate limit
Implement dirtyrate calculation periodically basing on
dirty-ring and throttle virtual CPU until it reachs the quota
dirty page rate given by user.

Introduce qmp commands "set-vcpu-dirty-limit",
"cancel-vcpu-dirty-limit", "query-vcpu-dirty-limit"
to enable, disable, query dirty page limit for virtual CPU.

Meanwhile, introduce corresponding hmp commands
"set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit",
"info vcpu_dirty_limit" so the feature can be more usable.

"query-vcpu-dirty-limit" success depends on enabling dirty
page rate limit, so just add it to the list of skipped
command to ensure qmp-cmd-test run successfully.

Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <4143f26706d413dd29db0b672fe58b3d3fbe34bc.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-07-20 12:15:08 +01:00
Paolo Bonzini f55ba8018c block: add more commands to preconfig mode
Of the block device commands, those that are available outside system
emulators do not require a fully constructed machine by definition.
Allow running them before machine initialization has concluded.

Of the ones that are available inside system emulation, allow querying
the PR managers, and setting up accounting and throttling.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-14 16:50:30 +02:00
Vladislav Yaroshchuk fd8c8c056d net/vmnet: update hmp-commands.hx
Update HMP for supporting vmnet.

Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Vladislav Yaroshchuk <Vladislav.Yaroshchuk@jetbrains.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-05-17 16:48:23 +08:00
Richard Henderson cf6f26d6f9 vnc: add display-update monitor command.
screendump: add png support.
 vmsvga: screen update fix.
 i386: sev setup for -bios loaded firmware
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmJpfYUACgkQTLbY7tPo
 cTg6ChAAn5EWtNwmVbfbVzRTu0kqdx7QXyK6FFgTgXrsrmBCWzJhHDraYa9cMOZU
 wBlU/Rutuv9ETvtRTRic3t0qcdRmvZjpHuA/3agBMJY7xpEQbQ8NwVdSRZTOZo0i
 hXzWEAnxviEv8F/W1TXwB5d2Q9sWlJ2yO8SvcxTfAEK7hOSFrWypp3XRKr5WBHjO
 DFTtwqTk9MRNsgsfnpEHNGDb30JPTqKZKRbDal15NDR9fQz+iCq3FIv/FpBaUfys
 v9GA2zNT324MvhR64xNblaujCn2XFOsFvDY4nGDrfbKGJch8ltAg5t4G1CCZqOn7
 NIiwodC0508sAv9xUm+qvh+oHyf11EFdcAMWYimrExY2I51XOEDnJip/SAdogo5u
 h7LyLkZTEG5tyc+a4PGIcC216ecDDNytMnJM9nh9YK3p5UiBOgcHV2wWDdzJbsdS
 GRoP0fzF/MBQd985HBCF2vtQVk4AbQA7atZ8FKp1ZsHr3sFfs+vd0xyItsDMinBP
 k/eKOOKbHRgXcdIocw4PK16yURrMo5IUGCGGiG9waqYz+VDyHhtikBAzQvYYdnqN
 NaZttCcEieIk4XNd+wCfI0GQLtOY/AP1k8TV0rCaDTnO6nOxJ/uP64IaCzxzCT10
 b8VRdCfYDGjd2C14XYKmTzBRPM4hVrf9bo7FtXVtmSksTG+eIao=
 =yaxh
 -----END PGP SIGNATURE-----

Merge tag 'kraxel-20220427-pull-request' of git://git.kraxel.org/qemu into staging

vnc: add display-update monitor command.
screendump: add png support.
vmsvga: screen update fix.
i386: sev setup for -bios loaded firmware

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmJpfYUACgkQTLbY7tPo
# cTg6ChAAn5EWtNwmVbfbVzRTu0kqdx7QXyK6FFgTgXrsrmBCWzJhHDraYa9cMOZU
# wBlU/Rutuv9ETvtRTRic3t0qcdRmvZjpHuA/3agBMJY7xpEQbQ8NwVdSRZTOZo0i
# hXzWEAnxviEv8F/W1TXwB5d2Q9sWlJ2yO8SvcxTfAEK7hOSFrWypp3XRKr5WBHjO
# DFTtwqTk9MRNsgsfnpEHNGDb30JPTqKZKRbDal15NDR9fQz+iCq3FIv/FpBaUfys
# v9GA2zNT324MvhR64xNblaujCn2XFOsFvDY4nGDrfbKGJch8ltAg5t4G1CCZqOn7
# NIiwodC0508sAv9xUm+qvh+oHyf11EFdcAMWYimrExY2I51XOEDnJip/SAdogo5u
# h7LyLkZTEG5tyc+a4PGIcC216ecDDNytMnJM9nh9YK3p5UiBOgcHV2wWDdzJbsdS
# GRoP0fzF/MBQd985HBCF2vtQVk4AbQA7atZ8FKp1ZsHr3sFfs+vd0xyItsDMinBP
# k/eKOOKbHRgXcdIocw4PK16yURrMo5IUGCGGiG9waqYz+VDyHhtikBAzQvYYdnqN
# NaZttCcEieIk4XNd+wCfI0GQLtOY/AP1k8TV0rCaDTnO6nOxJ/uP64IaCzxzCT10
# b8VRdCfYDGjd2C14XYKmTzBRPM4hVrf9bo7FtXVtmSksTG+eIao=
# =yaxh
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 27 Apr 2022 10:29:41 AM PDT
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [undefined]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [undefined]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* tag 'kraxel-20220427-pull-request' of git://git.kraxel.org/qemu:
  i386: firmware parsing and sev setup for -bios loaded firmware
  i386: factor out x86_firmware_configure()
  i386: move bios load error message
  avocado/vnc: add test_change_listen
  qapi/ui: add 'display-update' command for changing listen address
  ui/vnc: refactor arrays of addresses to SocketAddressList
  Added parameter to take screenshot with screendump as PNG
  Replacing CONFIG_VNC_PNG with CONFIG_PNG
  hw/display/vmware_vga: do not discard screen updates

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-04-27 10:49:28 -07:00
Kshitij Suri 9a0a119a38 Added parameter to take screenshot with screendump as PNG
Currently screendump only supports PPM format, which is un-compressed. Added
a "format" parameter to QMP and HMP screendump command to support PNG image
capture using libpng.

QMP example usage:
{ "execute": "screendump", "arguments": { "filename": "/tmp/image",
"format":"png" } }

HMP example usage:
screendump /tmp/image -f png

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/718

Signed-off-by: Kshitij Suri <kshitij.suri@nutanix.com>

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220408071336.99839-3-kshitij.suri@nutanix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-04-27 07:51:01 +02:00
Denis V. Lunev 80dd5aff1b block: add 'force' parameter to 'blockdev-change-medium' command
'blockdev-change-medium' is a convinient wrapper for the following
sequence of commands:
 * blockdev-open-tray
 * blockdev-remove-medium
 * blockdev-insert-medium
 * blockdev-close-tray
and should be used f.e. to change ISO image inside the CD-ROM tray.
Though the guest could lock the tray and some linux guests like
CentOS 8.5 actually does that. In this case the execution if this
command results in the error like the following:
  Device 'scsi0-0-1-0' is locked and force was not specified,
  wait for tray to open and try again.

This situation is could be resolved 'blockdev-open-tray' by passing
flag 'force' inside. Thus is seems reasonable to add the same
capability for 'blockdev-change-medium' too.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Acked-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220412221846.280723-1-den@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-04-25 12:02:36 +02:00
Viktor Prutyanov f5daa8293b dump/win_dump: add 32-bit guest Windows support
Before this patch, 'dump-guest-memory -w' was accepting only 64-bit
dump header provided by guest through vmcoreinfo and thus was unable
to produce 32-bit guest Windows dump. So, add 32-bit guest Windows
dumping support.

Signed-off-by: Viktor Prutyanov <viktor.prutyanov@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[ misc error handling fixes to avoid compiler warning ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220406171558.199263-5-viktor.prutyanov@redhat.com>
2022-04-22 13:41:56 +04:00
Stefan Reiter 675fd3c96b qapi/monitor: allow VNC display id in set/expire_password
It is possible to specify more than one VNC server on the command line,
either with an explicit ID or the auto-generated ones à la "default",
"vnc2", "vnc3", ...

It is not possible to change the password on one of these extra VNC
displays though. Fix this by adding a "display" parameter to the
"set_password" and "expire_password" QMP and HMP commands.

For HMP, the display is specified using the "-d" value flag.

For QMP, the schema is updated to explicitly express the supported
variants of the commands with protocol-discriminated unions.

Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[FE: update "Since: " from 6.2 to 7.0
     make @connected a common member of @SetPasswordOptions]
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Message-Id: <20220225084949.35746-4-f.ebner@proxmox.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-03-02 18:12:40 +00:00
BALATON Zoltan de4cf848b1 hmp: Add shortcut to stop command to match cont
Some commands such as quit or cont have one letter alternatives but
stop is missing that. Add stop|s to match cont|c for consistency and
convenience.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20211030095225.513D4748F48@zero.eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-11-09 10:11:27 +01:00
Hyman Huang(黄勇) 826b8bc80c migration/dirtyrate: implement dirty-bitmap dirtyrate calculation
introduce dirty-bitmap mode as the third method of calc-dirty-rate.
implement dirty-bitmap dirtyrate calculation, which can be used
to measuring dirtyrate in the absence of dirty-ring.

introduce "dirty_bitmap:-b" option in hmp calc_dirty_rate to
indicate dirty bitmap method should be used for calculation.

Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2021-11-01 22:56:44 +01:00
Hyman Huang(黄勇) 0e21bf2460 migration/dirtyrate: implement dirty-ring dirtyrate calculation
use dirty ring feature to implement dirtyrate calculation.

introduce mode option in qmp calc_dirty_rate to specify what
method should be used when calculating dirtyrate, either
page-sampling or dirty-ring should be passed.

introduce "dirty_ring:-r" option in hmp calc_dirty_rate to
indicate dirty ring method should be used for calculation.

Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <7db445109bd18125ce8ec86816d14f6ab5de6a7d.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2021-11-01 22:56:43 +01:00
Markus Armbruster 8982552e6a hmp: Drop a bogus sentence from set_password's documentation
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210909081219.308065-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-27 10:57:21 +02:00
Paolo Bonzini 48f596c5a7 netdev: add more commands to preconfig mode
Creating and destroying network backend does not require a fully
constructed machine.  Allow the related monitor commands to run before
machine initialization has concluded.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-06-11 10:30:13 +08:00
Peter Xu a4a571d978 hmp: Add "calc_dirty_rate" and "info dirty_rate" cmds
These two commands are missing when adding the QMP sister commands.
Add them, so developers can play with them easier.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <4cc0039fc3ad6145136770cf3b0f056c09a2910b.1623027729.git.huangy81@chinatelecom.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-06-08 20:18:26 +01:00
Peter Maydell 8385235ba9 * submodule cleanups (Philippe, myself)
* tiny step towards a usable preconfig mode (myself)
 * Kconfig and LOCK_GUARD cleanups (philippe)
 * new x86 CPUID feature (Yang Zhong)
 * "-object qtest" support (myself)
 * Dirty ring support for KVM (Peter)
 * Fixes for 6.0 command line parsing breakage (myself)
 * Fix for macOS 11.3 SDK (Katsuhiro)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCuRAQUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroOL6Qf/bUjQNAUc2QQJya1lu8TEf1o4vjkK
 C3EzFPVAj+m2O3OZOGEHcTh8+lDSzBeE2gB3bt4AD+KvFbQGXhLM3gMu/Ztymv8m
 3rVEe/NxNyq/CgC307GIwF3in7rEzjH0+WHaOuoU340e3Po1FA7s20VnMysVxxng
 4Pf4m4Y0k0eq022HgqZ/r/kbnINxDHagmzuyiFARkt8ooiuj4NyOMW7UKMk3fBvY
 MLMPsBe3imWmVnkOF0n/qJ+Svbtx15iLgGIIggshy3rmPereUpIQYaJ9FS6jcXO2
 YHuYDc2aGelMU84r+x+9UQra6auzJfc4UbylOsGjopCeFG2aU8rLMphvpw==
 =UQwU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* submodule cleanups (Philippe, myself)
* tiny step towards a usable preconfig mode (myself)
* Kconfig and LOCK_GUARD cleanups (philippe)
* new x86 CPUID feature (Yang Zhong)
* "-object qtest" support (myself)
* Dirty ring support for KVM (Peter)
* Fixes for 6.0 command line parsing breakage (myself)
* Fix for macOS 11.3 SDK (Katsuhiro)

# gpg: Signature made Wed 26 May 2021 13:50:12 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (28 commits)
  gitlab-ci: use --meson=git for CFI jobs
  hw/scsi: Fix sector translation bug in scsi_unmap_complete_noio
  configure: Avoid error messages about missing *-config-*.h files
  doc: Add notes about -mon option mode=control argument.
  qemu-config: load modules when instantiating option groups
  vl: allow not specifying size in -m when using -M memory-backend
  replication: move include out of root directory
  remove qemu-options* from root directory
  meson: Set implicit_include_directories to false
  tests/qtest/fuzz: Fix build failure
  KVM: Dirty ring support
  KVM: Disable manual dirty log when dirty ring enabled
  KVM: Add dirty-ring-size property
  KVM: Cache kvm slot dirty bitmap size
  KVM: Simplify dirty log sync in kvm_set_phys_mem
  KVM: Provide helper to sync dirty bitmap from slot to ramblock
  KVM: Provide helper to get kvm dirty log
  KVM: Create the KVMSlot dirty bitmap on flag changes
  KVM: Use a big lock to replace per-kml slots_lock
  memory: Introduce log_sync_global() to memory listener
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-26 21:05:36 +01:00
Paolo Bonzini 9e33013bd4 object: add more commands to preconfig mode
Creating and destroying QOM objects does not require a fully constructed
machine.  Allow running object-add and object-del before machine
initialization has concluded.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-26 14:49:45 +02:00
Alex Bennée ae49ce0019 hmp-commands: expand type of icount to "l" in replay commands
This is not a 32 bit number, it can (and most likely will) be quite a
big one.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210520174303.12310-7-alex.bennee@linaro.org>
2021-05-25 16:52:50 +01:00
Markus Armbruster bdabafc683 block: Remove monitor command block_passwd
Command block_passwd always fails since

Commit c01c214b69 "block: remove all encryption handling APIs"
(v2.10.0) turned block_passwd into a stub that always fails, and
hardcoded encryption_key_missing to false in query-named-block-nodes
and query-block.

Commit ad1324e044 "block: remove 'encryption_key_missing' flag from
QAPI" just landed.  Complete the cleanup job: remove block_passwd.

Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323101951.3686029-1-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-23 22:31:56 +01:00
Kevin Wolf da0a932bbf hmp: QAPIfy object_add
This switches the HMP command object_add from a QemuOpts-based parser to
user_creatable_add_from_str() which uses a keyval parser and enforces
the QAPI schema.

Apart from being a cleanup, this makes non-scalar properties and help
accessible. In order for help to be printed to the monitor instead of
stdout, the printf() calls in the help functions are changed to
qemu_printf().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-03-19 10:17:14 +01:00
Daniel P. Berrangé cbde7be900 migrate: remove QMP/HMP commands for speed, downtime and cache size
The generic 'migrate_set_parameters' command handle all types of param.

Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00
Daniel P. Berrangé 5994dcb8d8 ui, monitor: remove deprecated VNC ACL option and HMP commands
The VNC ACL concept has been replaced by the pluggable "authz" framework
which does not use monitor commands.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00
Paolo Bonzini cfb5387a1d hmp: remove "change vnc TARGET" command
The HMP command \"change vnc TARGET\" is messy:

- it takes an ugly shortcut to determine if the option has an "id",
with incorrect results if "id=" is not preceded by an unescaped
comma.

- it deletes the existing QemuOpts and does not try to rollback
if the parsing fails (which is not causing problems, but only due to
how VNC options are parsed)

- because it uses the same parsing function as "-vnc", it forces
the latter to not support "-vnc help".

On top of this, it uses a deprecated QMP command, thus getting in
the way of removing the QMP command.  Since the usecase for the
command is not clear, just remove it and send "change vnc password"
directly to the QMP "change-vnc-password" command.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210120144235.345983-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-23 15:55:07 -05:00
Peter Maydell ff688cd2c7 hmp-commands.hx: List abbreviation after command for cont, quit, print
We have four HMP commands which have a single-character abbreviated
version: cont ('c'), quit ('q'), print ('p') and help ('h').  For
cont, quit and print, we list the abbreviation first in the help
documentation and the command name.  This has the odd effect that in
the full 'help' command list these commands end up sorted out of
alphabetical order (they end up after all the other commands that
start with the same letter).  As it happens, the only place this
currently changes the order is for 'cont'.

Abbreviation first is also not a very logical order, and it doesn't
match what we use for 'help' (which is 'help|?').  Put the full
command name first in both the help text and the .name field for
cont, quit and print.

Fixes: https://bugs.launchpad.net/qemu/+bug/1614609
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201121151711.20783-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18 10:08:24 +00:00
Paolo Bonzini ebe3444468 monitor: allow quitting while in preconfig state
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:57 -05:00
Zenghui Yu 8ad4e4519c pcie_aer: Fix help message of pcie_aer_inject_error command
There is an interesting typo in the help message of pcie_aer_inject_error
command. Use 'tlp' instead of 'tlb' to match the PCIe AER term.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201204030953.837-1-yuzenghui@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09 13:04:17 -05:00
Marc-André Lureau 0d9b90ce5c console: make QMP/HMP screendump run in coroutine
Thanks to the monitors' coroutine support (merge commit b7092cda1b),
the screendump handler can trigger a graphic_hw_update(), yield and let
the main loop run until update is done. Then the handler is resumed, and
ppm_save() will write the screen image to disk in the coroutine context.

The IO is still blocking though, as the file is set blocking so far,
this could be addressed by some future change (with other caveats).

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1230527

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201027133602.3038018-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-11-04 08:02:25 +01:00
Kevin Wolf eb94b81a94 block: Convert 'block_resize' to coroutine
block_resize performs some I/O that could potentially take quite some
time, so use it as an example for the new 'coroutine': true annotation
in the QAPI schema.

bdrv_truncate() requires that we're already in the right AioContext for
the BlockDriverState if called in coroutine context. So instead of just
taking the AioContext lock, move the QMP handler coroutine to the
context.

Call blk_unref() only after switching back because blk_unref() may only
be called in the main thread.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-15-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:20 +02:00
Pavel Dovgalyuk f6baed3d14 replay: implement replay-seek command
This patch adds hmp/qmp commands replay_seek/replay-seek that proceed
the execution to the specified instruction count.
The command automatically loads nearest snapshot and replays the execution
to find the desired instruction count.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>

--

v4 changes:
 - fixed HMP command description indent
 - removed useless error_free call
Message-Id: <160174521180.12451.14033112911009278753.stgit@pasha-ThinkPad-X280>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06 08:34:49 +02:00
Pavel Dovgalyuk e751067179 replay: introduce breakpoint at the specified step
This patch introduces replay_break, replay_delete_break
qmp and hmp commands.
These commands allow stopping at the specified instruction.
It may be useful for debugging when there are some known
events that should be investigated.
replay_break command has one argument - number of instructions
executed since the start of the replay.
replay_delete_break removes previously set breakpoint.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>

--

v4 changes:
 - removed useless error_free call
Message-Id: <160174520606.12451.7056879546045599378.stgit@pasha-ThinkPad-X280>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06 08:34:49 +02:00
Igor Mammedov 63e79833c4 cphp: remove deprecated cpu-add command(s)
These were deprecated since 4.0, remove both HMP and QMP variants.

Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:30 -04:00
zhaolichang e3a6e0daf4 qemu/: fix some comment spelling errors
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-2-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-17 20:35:43 +02:00
David Hildenbrand 2d9e3dd9be hmp: Make json format optional for qom-set
Commit 7d2ef6dcc1 ("hmp: Simplify qom-set") switched to the json
parser, making it possible to specify complex types. However, with this
change it is no longer possible to specify proper sizes (e.g., 2G, 128M),
turning the interface harder to use for properties that consume sizes.

Let's switch back to the previous handling and allow to specify passing
json via the "-j" parameter.

Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200610075153.33892-1-david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17 17:48:39 +01:00
Dr. David Alan Gilbert 7d2ef6dcc1 hmp: Simplify qom-set
Simplify qom_set by making it use qmp_qom_set and the JSON parser.

(qemu) qom-get /machine smm
"auto"
(qemu) qom-set /machine smm "auto"

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200520151108.160598-3-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  With 's'->'S' type change suggested by Paolo and Markus
2020-06-01 18:44:27 +01:00
Dr. David Alan Gilbert 89cf4fe34f hmp: Implement qom-get HMP command
This started off as Andreas Färber's implementation from
March 2015, but after feedback from Paolo and Markus it morphed into
using the json output which handles structs reasonably.

Use with qom-list to find the members of an object.

(qemu) qom-get /backend/console[0]/device/vga.rom[0] size
65536
(qemu) qom-get /machine smm
"auto"
(qemu) qom-get /machine rtc-time
{
    "tm_year": 120,
    "tm_sec": 51,
    "tm_hour": 9,
    "tm_min": 50,
    "tm_mon": 4,
    "tm_mday": 20
}
(qemu) qom-get /machine frob
Error: Property '.frob' not found

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200520151108.160598-2-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-01 18:44:27 +01:00
Peter Maydell 3c95fdef94 Update comments in .hx files that mention Texinfo
Update the header comments in .hx files that mention STEXI/ETEXI
markup; this is now SRST/ERST as all these files have been
converted to rST.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-3-peter.maydell@linaro.org
2020-03-12 11:14:05 +00:00
Thomas Huth b4983c570c net: Remove deprecated [hub_id name] tuple of 'hostfwd_add' / 'hostfwd_remove'
It's been deprecated since QEMU v3.1.0. Time to finally remove it now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191205104109.18680-1-thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Reworked Thomas's deprecated.texi to the rst
2020-03-09 18:44:04 +00:00
Peter Maydell 29f9dff790 *.hx: Remove all the STEXI/ETEXI blocks
We no longer generate texinfo from the hxtool input files,
so delete all the STEXI/ETEXI blocks.

This commit was created using the following Perl one-liner:
  perl -i -n -e '$suppress = 1,next if /^STEXI/;$suppress=0,next if /^ETEXI/; print if !$suppress;' *.hx

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-06 11:06:55 +00:00
Peter Maydell a6b30bcae6 hmp-commands.hx: Add rST documentation fragments
Add the rST versions of the documentation fragments.  Once we've
converted fully from Texinfo to rST we can remove the ETEXI
fragments; for the moment we need both.

Since the only consumer of the hmp-commands hxtool documentation
is the HTML manual, all we need to do for the monitor command
documentation to appear in the Sphinx system manual is add the
one line that invokes the hxtool extension on the .hx file.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-21-peter.maydell@linaro.org
2020-03-06 10:05:12 +00:00
Kevin Wolf 89b6fc4561 hmp: Allow using qdev ID for qemu-io command
In order to issue requests on an existing BlockBackend with the
'qemu-io' HMP command, allow specifying the BlockBackend not only with a
BlockBackend name, but also with a qdev ID/QOM path for a device that
owns the (possibly anonymous) BlockBackend.

Because qdev names could be conflicting with BlockBackend and node
names, introduce a -d option to explicitly address a device. If the
option is not given, a BlockBackend or a node is addressed.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-12-19 18:04:25 +01:00
Kővágó, Zoltán f0b9f36d71 audio: add audiodev property to vnc and wav_capture
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 8cbc9e865bbf40850c14340fc0549e6ac2d5fe9c.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 09:13:37 +02:00
Dr. David Alan Gilbert c6644548c7 net/announce: Add HMP optional ID
Add the optional ID to the HMP command.

e.g.
   # start an announce for a long time on eth1
   migrate_set_parameter announce-rounds 1000
   announce_self "eth1" e1

   # start an announce on eth2
   announce_self "eth2" e2

   # Change e1 to be announcing on eth1 and eth3
   announce_self "eth1,eth3" e1

   # Cancel e1
   migrate_set_parameter announce-rounds 0
   announce_self "" e1

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02 10:21:07 +08:00
Dr. David Alan Gilbert 0852827115 net/announce: Add HMP optional interface list
Add the optional interface list to the HMP command.

i.e.

   All interfaces
        announce_self

   Just the named interfaces:
        announce_self vn1,vn2

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02 10:21:06 +08:00
Kevin Wolf a0cd5e1c8e monitor: Rename HMP command type and tables
This renames the type for HMP monitor commands and the tables holding
the commands to make clear that they are related to HMP and to allow
making them public later:

* mon_cmd_t -> HMPCommand (fixing use of a reserved name, too)
* mon_cmds -> hmp_cmds
* info_cmds -> hmp_info_cmds

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[sortcmdlist() cleaned up to make checkpatch.pl happy]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-17 20:36:56 +02:00
Dr. David Alan Gilbert 574d96933c hmp: gva2gpa debug command
Add a gva2gpa command purely for debug which performs
address translation on the gva, the existing gpa2hva
command can then also be used to find it in the qemu
userspace; e.g.

(qemu) info registers
.... RSP=ffffffff81c03e98
....
(qemu) gva2gpa 0xffffffff81c03e98
gpa: 0x1c03e98
(qemu) gpa2hva 0x1c03e98
Host virtual address for 0x1c03e98 (pc.ram) is 0x7f0599a03e98
(qemu) x/10x 0xffffffff81c03e98
ffffffff81c03e98: 0x81c03eb8 0xffffffff 0x8101ea3f 0xffffffff
ffffffff81c03ea8: 0x81d27b00 0xffffffff 0x00000000 0x00000000
ffffffff81c03eb8: 0x81c03ec8 0xffffffff

gdb -p ...qemu...
(gdb) x/10x 0x7f0599a03e98
0x7f0599a03e98:	0x81c03eb8	0xffffffff	0x8101ea3f	0xffffffff
0x7f0599a03ea8:	0x81d27b00	0xffffffff	0x00000000	0x00000000
0x7f0599a03eb8:	0x81c03ec8	0xffffffff

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190412152652.827-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-05-01 10:46:59 +01:00
Dr. David Alan Gilbert 544f6ea324 hmp: Add hmp_announce_self
Add an HMP command to trigger self annocements.
Unlike the QMP command (which takes a set of parameters), the HMP
command reuses the set of parameters used for migration.

Signend-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-03-05 11:27:41 +08:00
Daniel Henrique Barboza 6ca080453e block/snapshot.c: eliminate use of ID input in snapshot operations
At this moment, QEMU attempts to create/load/delete snapshots
by using either an ID (id_str) or a name. The problem is that the code
isn't consistent of whether the entered argument is an ID or a name,
causing unexpected behaviors.

For example, when creating snapshots via savevm <arg>, what happens is that
"arg" is treated as both name and id_str. In a guest without snapshots, create
a single snapshot via savevm:

(qemu) savevm 0
(qemu) info snapshots
List of snapshots present on all disks:
ID        TAG                 VM SIZE                DATE       VM CLOCK
--        0                      741M 2018-07-31 13:39:56   00:41:25.313

A snapshot with name "0" is created. ID is hidden from the user, but the
ID is a non-zero integer that starts at "1". Thus, this snapshot has
id_str=1, TAG="0". Creating a second snapshot with arg = 1, the first one
is deleted:

(qemu) savevm 1
(qemu) info snapshots
List of snapshots present on all disks:
ID        TAG                 VM SIZE                DATE       VM CLOCK
--        1                      741M 2018-07-31 13:42:14   00:41:55.252

What happened?

- when creating the second snapshot, a verification is done inside
bdrv_all_delete_snapshot to delete any existing snapshots that matches an
string argument. Here, the code calls bdrv_all_delete_snapshot("1", ...);

- bdrv_all_delete_snapshot calls bdrv_snapshot_find(..., "1") for each
BlockDriverState of the guest. And this is where things goes tilting:
bdrv_snapshot_find does a search by both id_str and name. It finds
out that there is a snapshot that has id_str = 1, stores a reference
to the snapshot in the sn_info pointer and then returns match found;

- since a match was found, a call to bdrv_snapshot_delete_by_id_or_name() is
made. This function ignores the pointer written by bdrv_snapshot_find. Instead,
it deletes the snapshot using bdrv_snapshot_delete() calling it first with
id_str = 1. If it fails to delete, then it calls it again with name = 1.

- after all that, QEMU creates the new snapshot, that has id_str = 1 and
name = 1. The user is left wondering that happened with the first snapshot
created. Similar bugs can be triggered when using loadvm and delvm.

Before contemplating discarding the use of ID input in these operations,
I've searched the code of what would be the implications. My findings
are:

- the RBD and Sheepdog drivers don't care. Both uses the 'name' field as
key in their logic, making id_str = name when appropriate.
replay-snapshot.c does not make any special use of id_str;

- qcow2 uses id_str as an unique identifier but it is automatically
calculated, not being influenced by user input. Other than that, there are
no distinguish operations made only with id_str;

- in blockdev.c, the delete operation uses a match of both id_str AND
name. Given that id_str is either a copy of 'name' or auto-generated,
we're fine here.

This gives motivation to not consider ID as a valid user input in HMP
commands - sticking with 'name' input only is more consistent. To
accomplish that, the following changes were made in this patch:

- bdrv_snapshot_find() does not match for id_str anymore, only 'name'. The
function is called in save_snapshot(), load_snapshot(), bdrv_all_delete_snapshot()
and bdrv_all_find_snapshot(). This change makes the search function more
predictable and does not change the behavior of any underlying code that uses
these affected functions, which are related to HMP (which is fine) and the
main loop inside vl.c (which doesn't care about it anyways);

- bdrv_all_delete_snapshot() does not call bdrv_snapshot_delete_by_id_or_name
anymore. Instead, it uses the pointer returned by bdrv_snapshot_find to
erase the snapshot with the exact match of id_str an name. This function
is called in save_snapshot and hmp_delvm, thus this change  produces the
intended effect;

- documentation changes to reflect the new behavior. I consider this to
be an API fix instead of an API change - the user was already creating
snapshots using 'name', but now he/she will also enjoy a consistent
behavior.

Ideally we would get rid of the id_str field entirely, but this would have
repercussions on existing snapshots. Another day perhaps.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-25 15:03:18 +01:00
Kashyap Chamarthy e25701b730 Deprecate HMP `cpu-add`
Since we're deprecating the QMP `cpu-add`, let's deprecate its HMP
equivalent, too.

Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20181030123526.26415-3-kchamart@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-11 15:45:22 -02:00