This adds support for the MOVE WITH OPTIONAL SPECIFICATIONS (MVCOS)
instruction. Allow to enable it for the qemu cpu model using
qemu-system-s390x ... -cpu qemu,mvcos=on ...
This allows to boot linux kernel that uses it for uacccess.
We are missing (as for most other part) low address protection checks,
PSW key / storage key checks and support for AR-mode.
We fake an ADDRESSING exception when called from problem state (which
seems to rely on PSW key checks to be in place) and if AR-mode is used.
user mode will always see a PRIVILEDGED exception.
This patch is based on an original patch by Miroslav Benes (thanks!).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170614133819.18480-3-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Such shifts are usually used to easily extract the PSW KEY from the PSW
mask, so let's avoid the confusing offset of 4.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170614133819.18480-2-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The FAC_ names were placeholders prior to the introduction
of the current facility modeling.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Exit to cpu loop so we reevaluate cpu_s390x_hw_interrupts.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Let's properly expose the CPU type (machine-type number) via "STORE CPU
ID" and "STORE SUBSYSTEM INFORMATION".
As TCG emulates basic mode, the CPU identification number has the format
"Annnnn", whereby A is the CPU address, and n are parts of the CPU serial
number (0 for us for now).
A specification exception will be injected if the address is not aligned
to a double word. Low address protection will not be checked as
we're missing some more general support for that.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170609133426.11447-3-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can tell from the program interrupt code, whether a program interrupt
has to forward the address in the PGM new PSW
(suppressing/terminated/completed) to point at the next instruction, or
if it is nullifying and the PSW address does not have to be incremented.
So let's not modify the PSW address outside of the injection path and
handle this internally. We just have to handle instruction length
auto detection if no valid instruction length can be provided.
This should fix various program interrupt injection paths, where the
PSW was not properly forwarded.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170609142156.18767-3-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170609142156.18767-2-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We have to make the address in the old PSW point at the next
instruction, as addressing exceptions are suppressing and not
nullifying.
I assume that there are a lot of other broken cases (as most instructions
we care about are suppressing) - all trigger_pgm_exception() specifying
and explicit number or ILEN_LATER look suspicious, however this is another
story that might require bigger changes (and I have to understand when
the address might already have been incremented first).
This is needed to make an upcoming kvm-unit-test work.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170529121228.2789-1-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The CDSG instruction requires a 16-byte alignement, as expressed in
the MO_ALIGN_16 passed to helper_atomic_cmpxchgo_be_mmu. In the non
parallel case, use check_alignment to enforce this.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170604202034.16615-4-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Use a common helper with PACK ASCII as the differences are limited to
the stride of the source operand.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-25-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For that we need to make program_interrupt available to qemu-user.
Fortunately there is almost nothing to change as both kvm_enabled and
CONFIG_KVM evaluate to false in that case.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-22-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As MVCL and MVCLE only differ by their operands, use a common
do_mvcl helper. Optimize it calling fast_memmove and fast_memset.
Correctly write back addresses. Check that r1 and r2/r3 registers
are even.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-21-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
adj_len_to_page doesn't return the correct result when the address
is already page aligned and the length is bigger than a page. Fix that.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-20-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As CLCL and CLCLE mostly differ by their operands, use a common do_clcl
helper. Another difference is that CLCL is not interruptible.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-19-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There are multiple issues with the COMPARE LOGICAL LONG EXTENDED
instruction:
- The test between the two operands is inverted, leading to an inversion
of the cc values 1 and 2.
- The address and length of an operand continue to be decreased after
reaching the end of this operand. These values are then wrong write
back to the registers.
- We should limit the amount of bytes to process, so that interrupts can
be served correctly.
At the same time rename dest into src1 and src into src3 to match the
operand names and make the code less confusing.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-18-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Improve fix_address to also handle the 24-bit mode. Rename fix_address
to wrap_address to better explain what is changed.
Replace the calls to get_address with x2 = 0 and b2 = 0 by
call to wrap_address, leading to the removal of this function. Rename
get_address_31fix into get_address.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-15-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
These functions differ from COMPARE by generating an exception for a
QNaN input. Use the non quiet version of floatXX_compare.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-10-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
And at the same time make IPTE SMP aware.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-4-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Currently we only present the plain z900 feature bits to the guest,
but QEMU already emulates some additional features (but not all of
the next CPU generation, so we can not use the next CPU level as
default yet). Since newer Linux kernels are checking the feature bits
and refuse to work if a required feature is missing, it would be nice
to have a way to present more of the supported features when we are
running with the "qemu" CPU.
This patch now adds the supported features to the "full_feat" bitmap,
so that additional features can be enabled on the command line now,
for example with:
qemu-system-s390x -cpu qemu,stfle=true,ldisp=true,eimm=true,stckf=true
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1495704132-5675-1-git-send-email-thuth@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
While the previous patch is required for proper conformance,
the vast majority of target insns are MVC and XC for implementing
memmove and memset respectively. The next most common are CLC,
TR, and SVC.
Implementing these (and a few others for which we already have
an implementation) directly is faster than going through full
translation to a TB.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Previously, helper_ex would construct the insn and then implement
the insn via direct calls other helpers. This was sufficient to
boot Linux but that is all.
It is easy enough to go the whole nine yards by stashing state for
EXECUTE within the cpu, and then rely on a new TB to be created
that properly and completely interprets the insn.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This split will be required for implementing EXECUTE properly.
Do this now as a separate step to aid comparison of before and
after TB listings.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Use this saved value instead of recomputing from next_pc difference.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Also provide the cross-cpu tlb flushing required by the PoO.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The PoO specifies that when R1==0, no ORing into the insn
loaded from storage takes place. Load a zero for this case.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
(1) The OR of the low bits or R1 into INSN were not being done
consistently; it was forgotten along all but the SVC path.
(2) The setting of ILEN was wrong on SVC path for EXRL.
(3) The data load for ICM read too much.
Fix these by consolidating data load at the beginning, using
get_ilen to control the number of bytes loaded, and ORing in
the byte from R1. Use extract64 from the full aligned insn
to extract arguments.
Pass in ILEN rather than RET as the more natural way to give
the required data along the SVC path.
Modify ENV->CC_OP directly rather than include it in the
functional interface.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Fix saving exception_index around mmu_translate; eliminate a dead store.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This will avoid needing forward declarations in following patches.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
TEST BLOCK was likely once used to execute basic memory
tests, but nowadays it's just a (slow) way to clear a page.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1495128400-23759-1-git-send-email-thuth@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Currently, under z/VM on a 0x2827, QEMU will detect a 0x2828 if no
IBC value is provided. QEMU will simply take the last model of that HW
generation, which happens to be the BC version.
Let's improve our search for that case by selecting the latest CPU
definition that matches the CPU type. This for example will avoid
detecting an z13 as a z13s.
We might still detect a GA2 version on a GA1 system, but as we don't
have further information at hand, there isn't too much we can do about
it. The alternative of always presenting the oldest GA is not backward
compatible, e.g:
You're running on 0x2827 GA2.
Old QEMU version indicated "0x2828 GA1 == 0x2827 GA2". After you updated
QEMU, you suddenly detect "0x2827 GA1". You're previous libvirt guest
might suddenly refuse to run.
In the end presenting a newer GA level does not matter because:
1: All GAX models share the same base feature set. A GAX++ might
support "more features".
2: Without an IBC, the guest can't detect the GA version.
If we have no IBC (esp. unblocked_ibc == 0), the IBC we will present
to the guest in read_SCP_info() will be 0. The guest will not know
which GA version it has. The problem of missing IBC propagates.
If we don't have a feature of the GA++ version, also our guest won't
have it. So in summary, the guest also has no idea of its GA version.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170531193434.6918-3-david@redhat.com>
Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[improve patch description by reusing mailing list discussion]
Let's also properly forward that bit. It should always be set. I
verified it under z/VM, it seems to be always set there. For now,
zKVM guests never get that bit set when the CPU model is active.
The PoP mentiones, that z800 + z900 (HW generation 7) always set this
bit to 0, so let's take care of that.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170531193434.6918-2-david@redhat.com>
Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
MIDA (modified indirect data addressing) is an optional facility, and
we (currently) don't support it. Let's post an operand exception if
the guest tries to set it in the orb and a channel program check
if it is set in a ccw, as specified in the Principles of Operation.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.
It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.
Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The riccb is kept unchanged during initial cpu reset. Move the data
structure to the other registers that are unchanged.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Implement a basic infrastructure of handling channel I/O instruction
interception for passed through subchannels:
1. Branch the code path of instruction interception handling by
SubChannel type.
2. For a passed-through subchannel, issue the ORB to kernel to do ccw
translation and perform an I/O operation.
3. Assign different condition code based on the I/O result, or
trigger a program check.
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-12-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We want to support real (i.e. not virtual) channel devices
even for guests that do not support MCSS-E (where guests may
see devices from any channel subsystem image at once). As all
virtio-ccw devices are in css 0xfe (and show up in the default
css 0 for guests not activating MCSS-E), we need an option to
squash both the virtio subchannels and e.g. passed-through
subchannels from their real css (0-3, or 0 for hosts not
activating MCSS-E) into the default css. This will be
exploited in a later patch.
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-4-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The SIGNAL PROCESSOR helper returns its value through the CC register.
set_cc_static should be called just after the helper.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170509082800.10756-3-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For that move the definition from kvm.c to cpu.h
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170509082800.10756-2-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Eric Bischoff <ebischoff@nerim.net>
Message-Id: <20170228120134.7921-1-ebischoff@suse.com>
[rth: Combine the two via insn->data; free the address temps.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
All of the interlocked access facility instructions raise a
specification exception for unaligned accesses. Do this by
using the (previously unused) unaligned_access hook.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Linux arch/s390/kernel/head(64).S uses LPP instruction if it is
available in facilities list provided by stfl/stfle instruction.
This is the case of newer z/System generations and their qemu
definition.
The description of LPP is at
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Message-Id: <20170227085353.20787-1-mbenes@suse.cz>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
s390_virtio_hypercall can trigger IO events and interrupts, most notably
when using virtio-ccw devices.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes: 278f5e98c6 ("s390x/misc_helper.c: wrap IO instructions in BQL")
Signed-off-by: Alexander Graf <agraf@suse.de>
According to "CPU Signaling and Response", "Signal-Processor Orders",
the order field is bit position 56-63. Without this, the Linux
guest kernel is sometimes unable to stop emulation and enters
an infinite loop of "XXX unknown sigp: 0xffffffff00000005".
Signed-off-by: Philipp Kern <phil@philkern.de>
Reviewed-by: Thomas Huth <thuth@tuxfamily.org>
[agraf: add comment according to email]
Signed-off-by: Alexander Graf <agraf@suse.de>
David Hildenbrand
Richard Henderson
Peter Maydell
Aurelien Jarno
Thomas Huth
Cornelia Huck
Juan Quintela
Stefan Hajnoczi
Eric Blake
Christian Borntraeger
Xiao Feng Ren
Eric Bischoff
Miroslav Benes
Philipp Kern