Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Similarly to the store_cpu_field() helper which takes a TCG
temporary, store its value to the CPUState, introduce the
store_cpu_field_constant() helper which store a constant to
CPUState (without using any TCG temporary).
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211029231834.2476117-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCTP insn, which sets the VPR.P0 predicate bits so
as to predicate any element at index Rn or greater is predicated. As
with VPNOT, this insn itself is predicable and subject to beatwise
execution.
The calculation of the mask is the same as is used to determine
ltpmask in mve_element_mask(), but we precalculate masklen in
generated code to avoid having to have 4 helpers specialized by size.
We put the decode line in with the low-overhead-loop insns in
t32.decode because it's logically part of that collection of insn
patterns, even though it is an MVE only insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMOV forms that move data between 2 general-purpose
registers and 2 32-bit lanes in a vector register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In a CPU with MVE, the VMOV (vector lane to general-purpose register)
and VMOV (general-purpose register to vector lane) insns are not
predicated, but they are subject to beatwise execution if they
are not in an IT block.
Since our implementation always executes all 4 beats in one tick,
this means only that we need to handle PSR.ECI:
* we must do the usual check for bad ECI state
* we must advance ECI state if the insn succeeds
* if ECI says we should not be executing the beat corresponding
to the lane of the vector register being accessed then we
should skip performing the move
Note that if PSR.ECI is non-zero then we cannot be in an IT block.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-45-peter.maydell@linaro.org
Instead of open-coding the "take NOCP exception if FPU disabled,
otherwise call gen_preserve_fp_state()" code in the accessors for
FPCXT_NS, add an argument to vfp_access_check_m() which tells it to
skip the gen_update_fp_context() call, so we can use it for the
FPCXT_NS case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-8-peter.maydell@linaro.org
The M-profile architecture requires that accesses to FPCXT_NS when
there is no active FP state must not take a NOCP fault even if the
FPU is disabled. We were not implementing this correctly, because
in our decode we catch the NOCP faults early in m-nocp.decode.
Fix this bug by moving all the handling of M-profile FP system
register accesses from vfp.decode into m-nocp.decode and putting
it above the NOCP blocks. This provides the correct behaviour:
* for accesses other than FPCXT_NS the trans functions call
vfp_access_check(), which will check for FPU disabled and
raise a NOCP exception if necessary
* for FPCXT_NS we have the special case code that doesn't
call vfp_access_check()
* when these trans functions want to raise an UNDEF they return
false, so the decoder will fall through into the NOCP blocks.
This means that NOCP correctly takes precedence over UNDEF
for these insns. (This is a difference from the other insns
handled by m-nocp.decode, where UNDEF takes precedence and
which we implement by having those trans functions call
unallocated_encoding() in the appropriate places.)
[Note for backport to stable: this commit has a semantic dependency
on commit 9a486856e9, which was not marked as cc-stable because
we didn't know we'd need it for a for-stable bugfix.]
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-4-peter.maydell@linaro.org
Add the framework for decoding MVE insns, with the necessary new
files and the meson.build rules, but no actual content yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-11-peter.maydell@linaro.org
On A-profile, PSR bits [15:10][26:25] are always the IT state bits.
On M-profile, some of the reserved encodings of the IT state are used
to instead indicate partial progress through instructions that were
interrupted partway through by an exception and can be resumed.
These resumable instructions fall into two categories:
(1) load/store multiple instructions, where these bits are called
"ICI" and specify the register in the ldm/stm list where execution
should resume. (Specifically: LDM, STM, VLDM, VSTM, VLLDM, VLSTM,
CLRM, VSCCLRM.)
(2) MVE instructions subject to beatwise execution, where these bits
are called "ECI" and specify which beats in this and possibly also
the following MVE insn have been executed.
There are also a few insns (LE, LETP, and BKPT) which do not use the
ICI/ECI bits but must leave them alone.
Otherwise, we should raise an INVSTATE UsageFault for any attempt to
execute an insn with non-zero ICI/ECI bits.
So far we have been able to ignore ECI/ICI, because the architecture
allows the IMPDEF choice of "always restart load/store multiple from
the beginning regardless of ICI state", so the only thing we have
been missing is that we don't raise the INVSTATE fault for bad guest
code. However, MVE requires that we honour ECI bits and do not
rexecute beats of an insn that have already been executed.
Add the support in the decoder for handling ECI/ICI:
* identify the ECI/ICI case in the CONDEXEC TB flags
* when a load/store multiple insn succeeds, it updates the ECI/ICI
state (both in DisasContext and in the CPU state), and sets a flag
to say that the ECI/ICI state was handled
* if we find that the insn we just decoded did not handle the
ECI/ICI state, we delete all the code that we just generated for
it and instead emit the code to raise the INVFAULT. This allows
us to avoid having to update every non-MVE non-LDM/STM insn to
make it check for "is ECI/ICI set?".
We continue with our existing IMPDEF choice of not caring about the
ICI state for the load/store multiples and simply restarting them
from the beginning. Because we don't allow interrupts in the middle
of an insn, the only way we would see this state is if the guest set
ICI manually on return from an exception handler, so it's a corner
case which doesn't merit optimisation.
ICI update for LDM/STM is simple -- it always zeroes the state. ECI
update for MVE beatwise insns will be a little more complex, since
the ECI state may include information for the following insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-5-peter.maydell@linaro.org
Switch translate-neon.c.inc from being #included into translate.c
to being its own compilation unit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-14-peter.maydell@linaro.org
Make the remaining functions needed by the translate-neon code
global.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-13-peter.maydell@linaro.org
Switch translate-vfp.c.inc from being #included into translate.c
to being its own compilation unit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-9-peter.maydell@linaro.org
Make the remaining functions which are needed by translate-vfp.c.inc
global.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-8-peter.maydell@linaro.org
Move the various gen_aa32* functions and macros out of translate.c
and into translate-a32.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-6-peter.maydell@linaro.org
Currently the trans functions for m-nocp.decode all live in
translate-vfp.inc.c; move them out into their own translation unit,
translate-m-nocp.c.
The trans_* functions here are pure code motion with no changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-5-peter.maydell@linaro.org
We want to split out the .c.inc files which are currently included
into translate.c so they are separate compilation units. To do this
we need to make some functions which are currently file-local to
translate.c have global scope; create a translate-a32.h paralleling
the existing translate-a64.h as a place for these declarations to
live, so that code moved into the new compilation units can call
them.
The functions made global here are those required by the
m-nocp.decode functions, except that I have converted the whole
family of {read,write}_neon_element* and also both the load_cpu and
store_cpu functions for consistency, even though m-nocp only wants a
few functions from each.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-4-peter.maydell@linaro.org
Frédéric Pétrot
Philippe Mathieu-Daudé
Peter Maydell