Add IVRS table for AMD IOMMU. Generate IVRS or DMAR
depending on emulated IOMMU.
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit (14c985cff target-i386: present virtual L3 cache info for vcpus)
misplaced compat property putting it in new 2.8 machine type
which would effectively to disable feature until 2.9 is released.
Intent of commit probably should be to disable feature for 2.7
and older while allowing not yet released 2.8 to have feature
enabled by default.
Cc: qemu-stable@nongnu.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Since commit
bacc344c ("machine: add properties to compat_props incrementaly")
there is no need to chain per machine type compat macro.
Clean up places where it was done anyway so it will be
consistent and won't confuse contributors during addtion
of new machine types.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some software algorithms are based on the hardware's cache info, for example,
for x86 linux kernel, when cpu1 want to wakeup a task on cpu2, cpu1 will trigger
a resched IPI and told cpu2 to do the wakeup if they don't share low level
cache. Oppositely, cpu1 will access cpu2's runqueue directly if they share llc.
The relevant linux-kernel code as bellow:
static void ttwu_queue(struct task_struct *p, int cpu)
{
struct rq *rq = cpu_rq(cpu);
......
if (... && !cpus_share_cache(smp_processor_id(), cpu)) {
......
ttwu_queue_remote(p, cpu); /* will trigger RES IPI */
return;
}
......
ttwu_do_activate(rq, p, 0); /* access target's rq directly */
......
}
In real hardware, the cpus on the same socket share L3 cache, so one won't
trigger a resched IPIs when wakeup a task on others. But QEMU doesn't present a
virtual L3 cache info for VM, then the linux guest will trigger lots of RES IPIs
under some workloads even if the virtual cpus belongs to the same virtual socket.
For KVM, there will be lots of vmexit due to guest send IPIs.
The workload is a SAP HANA's testsuite, we run it one round(about 40 minuates)
and observe the (Suse11sp3)Guest's amounts of RES IPIs which triggering during
the period:
No-L3 With-L3(applied this patch)
cpu0: 363890 44582
cpu1: 373405 43109
cpu2: 340783 43797
cpu3: 333854 43409
cpu4: 327170 40038
cpu5: 325491 39922
cpu6: 319129 42391
cpu7: 306480 41035
cpu8: 161139 32188
cpu9: 164649 31024
cpu10: 149823 30398
cpu11: 149823 32455
cpu12: 164830 35143
cpu13: 172269 35805
cpu14: 179979 33898
cpu15: 194505 32754
avg: 268963.6 40129.8
The VM's topology is "1*socket 8*cores 2*threads".
After present virtual L3 cache info for VM, the amounts of RES IPIs in guest
reduce 85%.
For KVM, vcpus send IPIs will cause vmexit which is expensive, so it can cause
severe performance degradation. We had tested the overall system performance if
vcpus actually run on sparate physical socket. With L3 cache, the performance
improves 7.2%~33.1%(avg:15.7%).
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will used by the next patch.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Further cleanup would need to call qemu_free_irq() at the appropriate
time, but for now this silences ASAN about direct leaks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
machine_class_base_init() member name is allocated by
machine_class_base_init(), but not freed by
machine_class_finalize(). Simply freeing there doesn't work,
because DEFINE_PC_MACHINE() overwrites it with a literal string.
Fix DEFINE_PC_MACHINE() not to overwrite it, and add the missing
free to machine_class_finalize().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
qemu_irq is already a pointer, no need to have an extra pointer level.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Some old Linux kernels (upstream before v4.0), or any released RHEL
kernels has problem in sending APIC EOI when IR is enabled. Meanwhile,
many of them only support explicit EOI for IOAPIC, which is only
introduced in IOAPIC version 0x20. This patch provide a way to boost
QEMU IOAPIC to version 0x20, in order for QEMU to correctly receive EOI
messages.
Without boosting IOAPIC version to 0x20, kernels before commit d32932d
("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces")
will have trouble enabling both IR and level-triggered interrupt devices
(like e1000).
To upgrade IOAPIC to version 0x20, we need to specify:
-global ioapic.version=0x20
To be compatible with old systems, 0x11 will still be the default IOAPIC
version. Here 0x11 and 0x20 are the only versions to be supported.
One thing to mention: this patch only applies to emulated IOAPIC. It
does not affect kernel IOAPIC behavior.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1470059959-372-1-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit f6e98444 (apic: Use apic_id as apic's migration instance_id)
breaks migration when in kernel irqchip is used for 2.6 and older
machine types.
It applies compat property only for userspace 'apic' type
instead of applying it to all apic types inherited from
'apic-common' type as it was supposed to do.
Fix it by setting compat property 'legacy-instance-id' for
'apic-common' type which affects inherited types (i.e. not
only 'apic' but also 'kvm-apic' types)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469800542-11402-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- interrupt remapping for intel iommus
- a bunch of virtio cleanups
- fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXkQsqAAoJECgfDbjSjVRpanoIAJ9JVlc1aEjt9sa0cSBcs+NQ
J7JmgU9FqFsj+4FrNTouO3AxTjHurd1UAULP1WMPD+V3JpbnHct8r6SCBLQ5EBMN
VOjYo4DwWs1g+DqnQ9WZmbadu06XvYi/yiAKNUzWfZk0MR11D0D/S5hmarNKw0Kq
tGHeTWjGeY4WqFLV7m+qB4+cqkAByn6um99UtUvgLL05RgIEIP2IEMKYZ+rXvAa9
iGUvzqlO7mbq/+LbL18kaWywa4TCwbbd2eSGWaqhX4CuB62Rl33mWTXFcfaYhkyp
Z3FgwaJ09h0lAjSVEbyAuLFMfO/BnMcsoKqwl4xc4vkn/xBCqFtgH9JcEVm3O8U=
=ge2D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
- interrupt remapping for intel iommus
- a bunch of virtio cleanups
- fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 21 Jul 2016 18:49:30 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (57 commits)
intel_iommu: avoid unnamed fields
virtio: Update migration docs
virtio-gpu: Wrap in vmstate
virtio-gpu: Use migrate_add_blocker for virgl migration blocking
virtio-input: Wrap in vmstate
9pfs: Wrap in vmstate
virtio-serial: Wrap in vmstate
virtio-net: Wrap in vmstate
virtio-balloon: Wrap in vmstate
virtio-rng: Wrap in vmstate
virtio-blk: Wrap in vmstate
virtio-scsi: Wrap in vmstate
virtio: Migration helper function and macro
virtio-serial: Remove old migration version support
virtio-net: Remove old migration version support
virtio-scsi: Replace HandleOutput typedef
Revert "mirror: Workaround for unexpected iohandler events during completion"
virtio-scsi: Call virtio_add_queue_aio
virtio-blk: Call virtio_add_queue_aio
virtio: Introduce virtio_add_queue_aio
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also avoid unnamed fields for portability.
Also, rename VTD_IRTE to VTD_IR_TableEntry for coding
style compliance.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch enables SID validation. Invalid interrupts will be dropped.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As neither QEMU nor KVM support more than 255 CPUs so far, this is
simple: we only need to switch the destination ID translation in
vtd_remap_irq_get if EIME is set.
Once CFI support is there, it will have to take EIM into account as
well. So far, nothing to do for this.
This patch allows to use x2APIC in split irqchip mode of KVM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[use le32_to_cpu() to retrieve dest_id]
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let IOAPIC the first consumer of x86 IOMMU IEC invalidation
notifiers. This is only used for split irqchip case, when vIOMMU
receives IR invalidation requests, IOAPIC will be notified to update
kernel irq routes. For simplicity, we just update all IOAPIC routes,
even if the invalidated entries are not IOAPIC ones.
Since now we are creating IOMMUs using "-device" parameter, IOMMU
device will be created after IOAPIC. We need to do the registration
after machine done by leveraging machine_done notifier.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces x86 IOMMU IEC (Interrupt Entry Cache)
invalidation notifier list. When vIOMMU receives IEC invalidate
request, all the registered units will be notified with specific
invalidation requests.
Intel IOMMU is the first provider that generates such a event.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In split irqchip mode, IOAPIC is working in user space, only update
kernel irq routes when entry changed. When IR is enabled, we directly
update the kernel with translated messages. It works just like a kernel
cache for the remapping entries.
Since KVM irqfd is using kernel gsi routes to deliver interrupts, as
long as we can support split irqchip, we will support irqfd as
well. Also, since kernel gsi routes will cache translated interrupts,
irqfd delivery will not suffer from any performance impact due to IR.
And, since we supported irqfd, vhost devices will be able to work
seamlessly with IR now. Logically this should contain both vhost-net and
vhost-user case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[move trace-events lines into target-i386/trace-events]
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch translates all IOAPIC interrupts into MSI ones. One pseudo
ioapic address space is added to transfer the MSI message. By default,
it will be system memory address space. When IR is enabled, it will be
IOMMU address space.
Currently, only emulated IOAPIC is supported.
Idea suggested by Jan Kiszka and Rita Sinha in the following patch:
https://lists.gnu.org/archive/html/qemu-devel/2016-03/msg01933.html
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch enables interrupt remapping for PCI devices.
To play the trick, one memory region "iommu_ir" is added as child region
of the original iommu memory region, covering range 0xfeeXXXXX (which is
the address range for APIC). All the writes to this range will be taken
as MSI, and translation is carried out only when IR is enabled.
Idea suggested by Paolo Bonzini.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Several data structs are defined to better support the rest of the
patches: IRTE to parse remapping table entries, and IOAPIC/MSI related
structure bits to parse interrupt entries to be filled in by guest
kernel.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Defined Interrupt Remap Table Address register to store IR table
pointer. Also, do proper handling on global command register writes to
store table pointer and its size.
One more debug flag "DEBUG_IR" is added for interrupt remapping.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In ACPI DMA remapping report structure, enable INTR flag when specified.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adding one property for intel-iommu devices to specify whether we should
support interrupt remapping. By default, IR is disabled. To enable it,
we should use (take Intel IOMMU as example):
-device intel_iommu,intremap=on
This property can be shared by Intel and future AMD IOMMUs.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of searching the device tree every time, one static variable is
declared for the default system x86 IOMMU device.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introducing parent class for intel-iommu devices named "x86-iommu". This
is preparation work to abstract shared functionalities out from Intel
and AMD IOMMUs. Currently, only the parent class is introduced. It does
nothing yet.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
instance_id is generated by last_used_id + 1 for a given device type
so for QEMU with 3 CPUs instance_id for APICs is a seti of [0, 1, 2]
When CPU in the middle is hot-removed and migration started
APICs with instance_ids 0 and 2 are transferred in migration stream.
However target starts with 2 CPUs and APICs' instance_ids are
generated from scratch [0, 1] hence migration fails with error
Unknown savevm section or instance 'apic' 2
Fix issue by manually registering APIC's vmsd with apic_id as
instance_id, in this case instance_id on target will always
match instance_id on source as apic_id is the same for a given
cpu instance.
Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Callbacks will do necessary cleanups before APIC device is deleted
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
local_apics[] is sized to contain all APIC ID supported in xAPIC mode,
so use APIC ID as index in it instead of constantly increasing counter idx.
Fixes error "apic initialization failed" when a CPU hotplugged and
unplugged more times than there are free slots in local_apics[].
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
MAX_APICS is only used by child 'apic' class and not
by its parent TYPE_APIC_COMMON or any other derived
class.
Move check into end user 'apic' class so it won't
get in the way of other APIC implementations
if they support more then MAX_APICS.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's reverse of apicid_from_topo_ids() and will be used in follow up
patches to fill in data structures for query-hotpluggable-cpus and
for user friendly error reporting.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Fill the bits between 51..number-of-physical-address-bits in the
MTRR_PHYSMASKn variable range mtrr masks so that they're consistent
in the migration stream irrespective of the physical address space
of the source VM in a migration.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This optionrom is based on linuxboot.S.
Signed-off-by: Marc Marí <markmb@redhat.com>
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <1464027093-24073-2-git-send-email-rjones@redhat.com>
[Add -fno-toplevel-reorder, support clang without -m16. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXe4l4AAoJECgfDbjSjVRpIz4IALye7mKG61/POA4Gqmhalc3d
HnlNSZ2YcKAuvPg7WWkBuRacrQvVY/MbW1mLloG1lY0tdFgZG8Cy+CY6wJg1NE4c
cXd+77vHkIyrnl+Nil+QOgTFiAsMnD+mXHHsnCDw2jGn3JbgVNuCMi7V34fGkQd2
PDkZyYfwTqO3HytuG0/j2Somc9du1gjYdn+9qigfZVgP96jGDojBuJWuuU5flCB3
Kj5xrOuI01XlbdTk71tVjBJBektQurWr6r7GECDqZIpUfc+BI70FU9jPh+OlLTO/
92yi29ncjyStz4tRnf18xoQ8uBgH/tD1xigEUPRtnm1+0i/tgONBL8cAdBF9FBE=
=ABGE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 05 Jul 2016 11:18:32 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (30 commits)
vmw_pvscsi: remove unnecessary internal msi state flag
e1000e: remove unnecessary internal msi state flag
vmxnet3: remove unnecessary internal msi state flag
mptsas: remove unnecessary internal msi state flag
megasas: remove unnecessary megasas_use_msi()
pci: Convert msi_init() to Error and fix callers to check it
pci bridge dev: change msi property type
megasas: change msi/msix property type
mptsas: change msi property type
intel-hda: change msi property type
usb xhci: change msi/msix property type
change pvscsi_init_msi() type to void
tests: add APIC.cphp and DSDT.cphp blobs
tests: acpi: add CPU hotplug testcase
log: Permit -dfilter 0..0xffffffffffffffff
range: Replace internal representation of Range
range: Eliminate direct Range member access
log: Clean up misuse of Range for -dfilter
pci_register_bar: cleanup
Revert "virtio-net: unbreak self announcement and guest offloads after migration"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PcPciInfo has two (ill-named) members: Range w32 is the PCI hole, and
w64 is the PCI64 hole.
Three users:
* I440FXState and MCHPCIState have a member PcPciInfo pci_info, but
only pci_info.w32 is actually used. This is confusing. Replace by
Range pci_hole.
* acpi_build() uses auto PcPciInfo pci_info to forward both PCI holes
from acpi_get_pci_info() to build_dsdt(). Replace by two variables
Range pci_hole, pci_hole64. Rename acpi_get_pci_info() to
acpi_get_pci_holes().
PcPciInfo is now unused; drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
The ICH9 LPC bridge has 24 output IRQs connected to GSI. Currently the IRQs are
referenced by pointers. The pointers are initialized at startup by direct access
to the structure fields. This violates Qemu device model.
The patch makes the IRQs handling to use GPIO model.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ich9->pic and ich9->ioapic differ for the first 16 GSIs (because
ich9->pic is wired to 8259+IOAPIC but ich9->ioapic is wired to
IOAPIC only). However, ich9->ioapic is never used for the first
16 GSIs, so the two vectors can be merged.
Reviewed-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ICH9 SMB bridge can be created using qdev API despite existence of helper
function. The type name is needed for such creation. Using a preprocessor
alias instead the string type name itself is preferable.
The patch makes the alias accessible through the header.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The port92 device has outgouing IRQ line A20. Currently the IRQ is referenced
by a pointer which normally is set during machine initialization. The
pointer is never changed at runtime. Hence, common GPIO model can be applied
to A20 IRQ line. Note that checking for IRQ to be connected as in
previous version of code is not required qemu_set_irq will do it.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The i8042 device has outgouing IRQ line A20. Currently the IRQ is referenced
by a pointer which normally is set during machine initialization. The pointer
is never changed at runtime. So common GPIO model can be applied to A20 IRQ
line. Note that checking for IRQ to be connected as in previous version
of code is not required because qemu_set_irq will do it.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During creation of Q35 instance several parameters are set using direct access.
It violates Qemu device model. Correctly, the parameters should be handled as
object properties.
The patch adds four link type properties for fields:
mch.ram_memory
mch.pci_address_space
mch.system_memory
mch.address_space_io
And, it adds two size type properties for fields:
mch.below_4g_mem_size
mch.above_4g_mem_size
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently vmport device is identified by the string literal. Using a
preprocessor alias instead is preferable.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PCMachineState.node_cpu was used for mapping APIC ID
to numa node id as CPU entries in SRAT used to be
built on sparse APIC ID bitmap (up to apic_id_limit).
However since commit
5803fce pc: acpi: SRAT: create only valid processor lapic entries
CPU entries in SRAT aren't build using apic bitmap
but using 0..maxcpus index instead which is also used
for creating numa_info[x].node_cpu map.
So instead of doing useless intermediate conversion from
1. node by cpu index -> node by apic id
i.e. numa_info[x].node_cpu -> PCMachineState.node_cpu
2. apic id -> srat entry PMX
PCMachineState.node_cpu[apic id] -> PMX value
use numa_info[x].node_cpu map directly like ARM does and do
1. numa_info[x].node_cpu -> PMX value using index
in range 0..maxcpus
and drop not necessary PCMachineState.node_cpu and related
code.
That also removes the last (not counting legacy hotplug)
dependency of ACPI code on apic_id_limit and need to allocate
huge sparse PCMachineState.node_cpu array in case of 32-bit
APIC IDs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For compatibility reasons PC/Q35 will start with legacy
CPU hotplug interface by default but with new CPU hotplug
AML code since 2.7 machine type. That way legacy firmware
that doesn't use QEMU generated ACPI tables will be
able to continue using legacy CPU hotplug interface.
While new machine type, with firmware supporting QEMU
provided ACPI tables, will generate new CPU hotplug AML,
which will switch to new CPU hotplug interface when
guest OS executes its _INI method on ACPI tables
loading.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add madt_cpu callback to AcpiDeviceIfClass and use
it for generating LAPIC MADT entries for CPUs.
Later it will be used for generating x2APIC
entries in case of more than 255 CPUs and also
would be reused by ARM target when ACPI CPU hotplug
is introduced there.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I looked at a dozen Intel CPU that have this CPUID and all of them
always had Core offset as 1 (a wasted bit when hyperthreading is
disabled) and Package offset at least 4 (wasted bits at <= 4 cores).
QEMU uses more compact IDs and it doesn't make much sense to change it
now. I keep the SMT and Core sub-leaves even if there is just one
thread/core; it makes the code simpler and there should be no harm.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of relying on x86_cpudef_setup() calling
qemu_hw_version(), just make old machines set model-id explicitly
on compat_props for qemu64, qemu32, and athlon. This will allow
us to eliminate x86_cpudef_setup() later.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently IOAPIC RO bits can be written. To be better aligned with
hardware, we should let them read-only.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1462875682-1349-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switch to adding compat properties incrementaly instead of
completly overwriting compat_props per machine type.
That removes data duplication which we have due to nested
[PC|SPAPR]_COMPAT_* macros.
It also allows to set default device properties from
default foo_machine_options() hook, which will be used
in following patch for putting VMGENID device as
a function if ISA bridge on pc/q35 machines.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Fixed CCW_COMPAT_* and PC_COMPAT_0_* defines]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Re-run scripts/clean-includes to apply the previous commit's
corrections and updates. Besides redundant qemu/typedefs.h, this only
finds a redundant config-host.h include in ui/egl-helpers.c. No idea
how that escaped the previous runs.
Some manual whitespace trimming around dropped includes squashed in.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change all machine_init() users that simply call type_register*()
to use type_init().
Cc: Evgeny Voevodin <e.voevodin@samsung.com>
Cc: Maksim Kozlov <m.kozlov@samsung.com>
Cc: Igor Mitsyanko <i.mitsyanko@gmail.com>
Cc: Dmitry Solodkiy <d.solodkiy@samsung.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
on x86 currently range 0..max_cpus is used to generate
architecture-dependent CPU ID (APIC Id) for each present
and possible CPUs. However architecture-dependent CPU IDs
list could be sparse and code that needs to enumerate
all IDs (ACPI) ended up doing guess work enumerating all
possible and impossible IDs up to
apic_id_limit = x86_cpu_apic_id_from_index(max_cpus).
That leads to creation of MADT entries and Processor
objects in ACPI tables for not possible CPUs.
Fix it by allowing board specify a concrete list of
CPU IDs accourding its own rules (which for x86 depends
on topology). So that code that needs this list could
request it from board instead of trying to guess
what IDs are correct on its own.
This interface will also allow to help making AML
part of CPU hotplug target independent so it could
be reused for ARM target.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
32 bits IO port starting from 0x0a18 in guest is reserved for NVDIMM
ACPI emulation. The table, NVDIMM_DSM_MEM_FILE, will be patched into
NVDIMM ACPI binary code
OSPM uses this port to tell QEMU the final address of the DSM memory
and notify QEMU to emulate the DSM method
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
change some "rbca" to "rcrb"(root complex register block) while
the other to "rcba"(root complex base address).
Bonus: add more comments and fix some indentation.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make it possible to query the CMOS type of a floppy drive outside of the
source file where it's defined.
It will allow to properly populate the corresponding ACPI objects and
thus enable Windows on BIOS-less systems to access the floppy drives.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Kevin O'Connor <kevin@koconnor.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move BIOS_CFG_IOPORT define from pc.c to pc.h, and rename
it to FW_CFG_IO_BASE.
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc Marí <markmb@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1455906029-25565-3-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes all over the place.
virtio dataplane migration support.
Old q35 machine types removed.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWzuKeAAoJECgfDbjSjVRpGzIH/1Tz6CoEq1rowiyVJ9B80oQU
gDI2YWnJDSwJllmAF0rmoPRBQR8op3ZETZiCAcADHoZ7kdBNWGbyQeaDrrEPH7Q/
rCDVt8Q3g80vs89aWKG0nQ16J2MW5TbkuiQw7pjQSdc9AbUdWpUqSiWnpZ+sPAql
6DuVpjQ4/rN2alucXoa1Sir8KDDV7kBuY8U6/KoY890qzh842dv2523qvuCza9yR
KX8Imj3oQAFjFSv5t1aOD3yYvWFd73EsReHPLGb1JtsVr/6wjs0sFUyA3JicBgnT
+kWoSObWikfDY69HnqTkJpkun6woMM3zW5h2SkUBf9QP3yqLfGIp9uSriNN84Ak=
=KXyh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, virtio, pci, pc
Fixes all over the place.
virtio dataplane migration support.
Old q35 machine types removed.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 25 Feb 2016 11:16:46 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (21 commits)
q35: No need to check gigabyte_align
q35: Remove unused q35-acpi-dsdt.aml file
ich9: Remove enable_tco arguments from init functions
machine: Remove no_tco field
q35: Remove old machine versions
tests/vhost-user-bridge: fix build on 32 bit systems
vring: remove
virtio-scsi: do not use vring in dataplane
virtio-blk: do not use vring in dataplane
virtio-blk: fix "disabled data plane" mode
virtio: export vring_notify as virtio_should_notify
virtio: add AioContext-specific function for host notifiers
vring: make vring_enable_notification return void
block-migration: acquire AioContext as necessary
pci core: function pci_bus_init() cleanup
pci core: function pci_host_bus_register() cleanup
balloon: Use only 'pc-dimm' type dimm for ballooning
virtio-balloon: rewrite get_current_ram_size()
move get_current_ram_size to virtio-balloon.c
vhost-user: don't merge regions with different fds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The enable_tco arguments are always true, so they are not needed
anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
NB: If this commit breaks compilation for your out-of-tree
patchseries or fork, then you need to make sure you add
#include "qemu/osdep.h" to any new .c files that you have.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Current intel_iommu only supports 4K page which may not be sufficient
to cover guest working set. This patch tries to enable 2M and 1G mapping
for intel_iommu. This is also useful for future device IOTLB
implementation to have a better hit rate.
Major work is adding a page mask field on IOTLB entry to make it
support large page. And also use the slpte level as key to do IOTLB
lookup. MAMV was increased to 18 to support direct invalidation for 1G
mapping.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The struct is not used for anything, now.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
The code can use the PCMachineClass.pci_enabled field directly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
The ACPI code can use the PCMachineState fields directly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Remove the fields: legacy_acpi_table_size, has_acpi_build,
has_reserved_memory, and rsdp_in_ram from PcGuestInfo, and let
the existing code use the PCMachineClass fields directly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
We can get the PcGuestInfo struct directly from PCMachineState,
and the return value is not needed at all.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
We can get the PcGuestInfo struct directly from PCMachineState,
and the return value is not needed at all.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Instead of allocating a new struct just for PcGuestInfo and the
mchine_done Notifier, place them inside PCMachineState.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
The struct will be used inside PCMachineState.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Replace the uint32 softfloat-specific typedef with uint32_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint32\b/uint32_t/g'
together with manual removal of the typedef definition,
manual undoing of various mis-hits, and another couple of
fixes found via test compilation.
All the uses in hw/ were using the wrong type by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-5-git-send-email-peter.maydell@linaro.org
This patch enables migrating vcpu's TSC rate. If KVM on the
destination machine supports TSC scaling, guest programs will
observe a consistent TSC rate across the migration.
If TSC scaling is not supported on the destination machine, the
migration will not be aborted and QEMU on the destination will
not set vcpu's TSC rate to the migrated value.
If vcpu's TSC rate specified by CPU option 'tsc-freq' on the
destination machine is inconsistent with the migrated TSC rate,
the migration will be aborted.
For backwards compatibility, the migration of vcpu's TSC rate is
disabled on pc-*-2.5 and older machine types.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Rewrote comment at kvm_arch_put_registers()]
[ehabkost: Moved compat code to pc-2.5]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Biggest content is a thorough cleanups of spapr machine type handling.
Also contains several other minor cleanups, bugfixes and extensions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r7ZI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160111' into staging
ppc patch queue 2016-01-11
Biggest content is a thorough cleanups of spapr machine type handling.
Also contains several other minor cleanups, bugfixes and extensions.
# gpg: Signature made Mon 11 Jan 2016 04:34:38 GMT using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.6-20160111:
hw/ppc/spapr: fix spapr->kvm_type leak
spapr vio: fix to incomplete QOMify
hw/ppc/spapr: Use XHCI as host controller for new spapr machines
pseries: Add pseries-2.6 machine type
pseries: Improve setting of default machine version
pseries: Restructure class_options functions
pseries: DEFINE_SPAPR_MACHINE
pseries: Use SET_MACHINE_COMPAT
Move SET_MACHINE_COMPAT macro to boards.h
pseries: Remove versions from mc->desc
pseries: Remove redundant calls to spapr_machine_initfn()
pseries: Rearrange versioned machine type code
pseries: Remove redundant setting of mc->name for pseries-2.5 machine
spapr: Add /system-id
target-ppc: Define kvmppc_read_int_dt()
hw/ppc/spapr_rtc: Remove bad class_size value
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pc.h defines a SET_MACHINE_COMPAT macro to make setting up compat_props
for the various PC machine versions less verbose. There's nothing
inherently PC specific about it, though, so move it to boards.h where other
versioned machine types (like pseries-*) can use it.
While we're doing that, change it's indentation to be a bit more regular.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Factor out and expose the function to locate the floppy controller in
the system.
It will allow to dynamically populate the relevant objects in the ACPI
tables.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-block@nongnu.org
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
Currently, we only support PMEM mode. Each device has 3 structures:
- SPA structure, defines the PMEM region info
- MEM DEV structure, it has the @handle which is used to associate specified
ACPI NVDIMM device we will introduce in later patch.
Also we can happily ignored the memory device's interleave, the real
nvdimm hardware access is hidden behind host
- DCR structure, it defines vendor ID used to associate specified vendor
nvdimm driver. Since we only implement PMEM mode this time, Command
window and Data window are not needed
The NVDIMM functionality is controlled by the parameter, 'nvdimm', which
is introduced for the machine, there is a example to enable it:
-machine pc,nvdimm -m 8G,maxmem=100G,slots=100 -object \
memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \
nvdimm,memdev=mem1,id=nv1
It is disabled on default
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cosmetic change only.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add pc-i440fx-2.6 and pc-q35-2.6 machine classes.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Group related PCMachineState and PCMachineClass fields into
sections, and move existing field descriptions to doc comments.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Add bus property to PC machines and use it when looking
for primary PCI root bus (bus 0).
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
The property is read-only and not used for anything.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
enforce_aligned_dimm never changes after the machine is
initialized, so it can be simply set in PCMachineClass like all
the other compat fields.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way we don't need code in pc_compat_*() functions to set the legacy
acpi_data_size value.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This way we can set legacy_acpi_table_size on the machine_options()
functions, instead of requirng code in pc_compat_*() functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This way the compat flags can be initialized in the machine_options()
function. This will help us to eventually eliminate the pc_compat_*()
functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This patch adds support for split IRQ chip mode. When
KVM_CAP_SPLIT_IRQCHIP is enabled:
1.) The PIC, PIT, and IOAPIC are implemented in userspace while
the LAPIC is implemented by KVM.
2.) The software IOAPIC delivers interrupts to the KVM LAPIC via
kvm_set_irq. Interrupt delivery is configured via the MSI routing
table, for which routes are reserved in target-i386/kvm.c then
configured in hw/intc/ioapic.c
3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI,
which is handled in target-i386/kvm.c and relayed to the software
IOAPIC via ioapic_eoi_broadcast.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM can't virtualize rdtscp on AMD CPUs yet, so there's no point
in enabling it by default on AMD CPU models, as all we are
getting are confused users because of the "host doesn't support
requested feature" warnings.
Disable rdtscp on Opteron_G* models, but keep compatibility on
pc-*-2.4 and older (just in case there are people are doing funny
stuff using AMD CPU models on Intel hosts).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
POPCNT is not available on Penryn and older and on Opteron_G2 and older,
and we want to make the default CPU runnable in most hosts, so it won't
be enabled by default in KVM mode.
We should eventually have all features supported by TCG enabled by
default in TCG mode, but as we don't have a good mechanism today to
ensure we have different defaults in KVM and TCG mode, disable POPCNT in
the qemu64 and qemu32 CPU models entirely.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
ABM is not available on Sandy Bridge and older, and we want to make the
default CPU runnable in most hosts, so it won't be enabled by default in
KVM mode.
We should eventually have all features supported by TCG enabled by
default in TCG mode, but as we don't have a good mechanism today to
ensure we have different defaults in KVM and TCG mode, disable ABM in
the qemu64 CPU model entirely.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
SSE4a is not available in any Intel CPU, and we want to make the default
CPU runnable in most hosts, so it doesn't make sense to enable it by
default in KVM mode.
We should eventually have all features supported by TCG enabled by
default in TCG mode, but as we don't have a good mechanism today to
ensure we have different defaults in KVM and TCG mode, disable SSE4a in
the qemu64 CPU model entirely.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The default CPU model (qemu64) have some issues today: it enables some
features (ABM and SSE4a) that are not present in many host CPUs. That
means many hosts (but not all of them) had those features silently
disabled in the default configuration in QEMU 2.4 and older.
With the new "check=on" default, this causes warnings to be printed in
the default configuration, because of the lack of SSE4A on all Intel
hosts, and the lack of ABM on Sandy Bridge and older hosts:
$ qemu-system-x86_64 -machine pc,accel=kvm
warning: host doesn't support requested feature: CPUID.80000001H:ECX.abm [bit 5]
warning: host doesn't support requested feature: CPUID.80000001H:ECX.sse4a [bit 6]
Those issues will be fixed in pc-*-2.5 and newer. But as we can't change
the guest ABI in pc-*-2.4, disable "check" mode by default in pc-*-2.4
and older so we don't print spurious warnings.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
