Use the generic Fifo8 helper provided by QEMU, rather than re-implement
privately.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET,
and it was issued as a bottom-half:
86e94dea5b
Which we basically used to print out a greeting/prompt for the
monitor.
AFAICT the only reason this was ever done in a BH was because in
some cases we'd modify the chr_write handler for a new chardev
backend *after* the site where we issued the reset (see:
86e94d:qemu_chr_open_stdio())
At some point this event was renamed to CHR_EVENT_OPENED, and we've
maintained the use of this BH ever since.
However, due to 9f939df955, we schedule
the BH via g_idle_add(), which is causing events to sometimes be
delivered after we've already begun processing data from backends,
leading to:
known bugs:
QMP:
session negotation resets with OPENED event, in some cases this
is causing new sessions to get sporadically reset
potential bugs:
hw/usb/redirect.c:
can_read handler checks for dev->parser != NULL, which may be
true if CLOSED BH has not been executed yet. In the past, OPENED
quiesced outstanding CLOSED events prior to us reading client
data. If it's delayed, our check may allow reads to occur even
though we haven't processed the OPENED event yet, and when we
do finally get the OPENED event, our state may get reset.
qtest.c:
can begin session before OPENED event is processed, leading to
a spurious reset of the system and irq_levels
gdbstub.c:
may start a gdb session prior to the machine being paused
To fix these, let's just drop the BH.
Since the initial reasoning for using it still applies to an extent,
work around that by deferring the delivery of CHR_EVENT_OPENED until
after the chardevs have been fully initialized, toward the end of
qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This
defers delivery long enough that we can be assured a CharDriverState
is fully initialized before CHR_EVENT_OPENED is sent.
Also, rather than requiring each chardev to do an explicit open, do it
automatically, and allow the small few who don't desire such behavior to
suppress the OPENED-on-init behavior by setting a 'explicit_be_open'
flag.
We additionally add missing OPENED events for stdio backends on w32,
which were previously not being issued, causing us to not recieve the
banner and initial prompts for qmp/hmp.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1370636393-21044-1-git-send-email-mdroth@linux.vnet.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now image info will be retrieved as an embbed json object inside
BlockDeviceInfo, backing chain info and all related internal snapshot
info can be got in the enhanced recursive structure of ImageInfo. New
recursive member *backing-image is added to reflect the backing chain
status.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds function bdrv_query_image_info(), which will
retrieve image info in qmp object format. The implementation is
based on the code moved from qemu-img.c, but uses block layer
function to get snapshot info.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds function bdrv_query_snapshot_info_list(), which will
retrieve snapshot info of an image in qmp object format. The implementation
is based on the code moved from qemu-img.c with modification to fit more
for qmp based block layer API.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* sstabellini/xen_fixes_20130603:
xen: use pc_init_pci instead of pc_init_pci_no_kvmclock
xen: remove xen_vcpu_init
xen: start PCI hole at 0xe0000000 (same as pc_init1 and qemu-xen-traditional)
xen_machine_pv: do not create a dummy CPU in machine->init
main_loop: do not set nonblocking if xen_enabled()
xen: simplify xen_enabled
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Stefan Hajnoczi (6) and others
# Via Kevin Wolf
* kwolf/for-anthony:
block: dump snapshot and image info to specified output
block: move qmp and info dump related code to block/qapi.c
block: move snapshot code in block.c to block/snapshot.c
block: drop bs_snapshots global variable
qemu-iotests: make create_image() common
qemu-iotests: make compare_images() common
qemu-iotests: make cancel_and_wait() common
qemu-iotests: make assert_no_active_block_jobs() common
block: add block driver read only whitelist
qemu-iotests: fix 054 cluster size help output
Message-id: 1370349940-4703-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This includes some pci-related cleanups,
and fw cfg cleanups which will be useful for on-going
pci related work.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRq6EsAAoJECgfDbjSjVRplKYIALtUF6RtKyOR6bSo1YvI203y
huzLkLP675D2cEFbjBsjJFLcQPXUbj78taePMgFwlLzKWCrV0wTuAX21Sd3m4i/p
P4BZzXd50EgRwxtpTBOu7jgboZbL/3TuVpRYDiGz5pRnWw/NBOPYbbi1Trj53nXg
lwOq8E1HZyBo7pniLkYsUuScXzmqQ5qqNDU0r5eQURKkqaIXJN6ZFlXb0N6IgWMZ
ytX5FGi22pIzQwf5oxKRrIbko1dyy+Jn5xoykEz9AbP+mt+kvTqjAkzO7cCSCmSq
DOYQT4EsGnokM2CVwdZEbjgjJ+nTrzwf7VbvMIlWOSHyPYBBMjBXXYhwsC/fuU8=
=Adz/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci: misc cleanups
This includes some pci-related cleanups,
and fw cfg cleanups which will be useful for on-going
pci related work.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 02 Jun 2013 02:46:52 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (8) and Laszlo Ersek (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pvpanic: use FWCfgState explicitly
fw_cfg: fw_cfg is a singleton
fw_cfg: add API to find FW cfg object
fw_cfg: move typedef to qemu/typedefs.h
refer to FWCfgState explicitly
apic: rename apic specific bitopts
firmware_abi: move to include/hw/nvram/
dec.c - move to pci-bridge
q35: set fw_name
Message-id: 1370202787-3712-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
bdrv_snapshot_dump() and bdrv_image_info_dump() do not dump to a buffer now,
some internal buffers are still used for format control, which have no
chance to be truncated. As a result, these two functions have no more issue
of truncation, and they can be used by both qemu and qemu-img with correct
parameter specified.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is a pure code move patch, except following modification:
1 get_human_readable_size() is changed to static function.
2 dump_human_image_info() is renamed to bdrv_image_info_dump().
3 in qmp_query_block() and qmp_query_blockstats, use bdrv_next(bs)
instead of direct traverse of global array 'bdrv_states'.
4 collect_snapshots() and collect_image_info() are renamed, unused parameter
*fmt in collect_image_info() is removed.
5 code style fix.
To avoid conflict and tip better, macro in header file is BLOCK_QAPI_H
instead of QAPI_H. Now block.h and snapshot.h are at the same level in
include path, block_int.h and qapi.h will both include them.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All snapshot related code, except bdrv_snapshot_dump() and
bdrv_is_snapshot(), is moved to block/snapshot.c. bdrv_snapshot_dump()
will be moved to another file later. bdrv_is_snapshot() is not related
with internal snapshot. It also fixes small code style errors reported
by check script.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bs_snapshots global variable points to the BlockDriverState which
will be used to save vmstate. This is really a savevm.c concept but was
moved into block.c:bdrv_snapshots() when it became clear that hotplug
could result in a dangling pointer.
While auditing the block layer's global state I came upon bs_snapshots
and realized that a variable is not necessary here. Simply find the
first BlockDriverState capable of internal snapshots each time this is
needed.
The behavior of bdrv_snapshots() is preserved across hotplug because new
drives are always appended to the bdrv_states list. This means that
calling the new find_vmstate_bs() function is idempotent - it returns
the same BlockDriverState unless it was hot-unplugged.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.
Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.
E.g. To include vmdk readonly, and others read+write:
./configure --target-list=x86_64-softmmu \
--block-drv-rw-whitelist=qcow2,raw,file,qed \
--block-drv-ro-whitelist=vmdk
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No need for xen_vcpu_init anymore:
- the RTC emulator doesn't have any periodic timers continuously running
even in absence of guest interactions anymore;
- qemu_dummy_start_vcpu takes care of disabling TCG for us, so we don't
need to do it manually here.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
We are currently setting the PCI hole to start at HVM_BELOW_4G_RAM_END,
that is 0xf0000000.
Start the PCI hole at 0xe0000000 instead, that is the same value used by
pc_init1 and qemu-xen-traditional.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: qemu-stable@nongnu.org
No need for preprocessor conditionals in xen_enabled: xen_allowed is
always defined.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: qemu-stable@nongnu.org
# By Gerd Hoffmann (5) and others
# Via Gerd Hoffmann
* kraxel/usb.83:
xhci: add live migration support
xhci: add xhci_init_epctx
xhci: add xhci_alloc_epctx
xhci: add XHCISlot->addressed
pci: add VMSTATE_MSIX
host-libusb: Correct test for USB packet state
Fix usage of USB_DEV_FLAG_IS_HOST flag.
Message-id: 1370253951-12323-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Using a trick cut+pasted from vmstate_scsi_device
to wind up msix_save and msix_load.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Remove some code duplication by adding a
function to look up the fw cfg file.
This way, we don't need to duplicate same strings everywhere.
Use by both fw cfg and pvpanic device.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently some places use pointer-to-void even though they mean
pointer-to-FWCfgState. Clean them up.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
firmware_abi.h with structs for OpenBIOS landed in hw/sparc/ by mistake
- move it to hw/nvram/ alongside fw_cfg.h. In addition to sparc it's
included from ppc mac_nvram.c and will need to include it from prep.c in
the future.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since it's not defined and used anywhere.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
# By Laszlo Ersek
# Via Michael Roth
* mdroth/qga-pull-2013-05-30:
Makefile: create ".../var/run" when installing the POSIX guest agent
qga: save state directory in ga_install_service()
qga: remove undefined behavior in ga_install_service()
qga: create state directory on win32
configure: don't save any fixed local_statedir for win32
qga: determine default state dir and pidfile dynamically
osdep: add qemu_get_local_state_pathname()
Message-id: 1369940341-9043-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Luiz Capitulino (1) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
target-i386: Fix mask of pte index in memory mapping
target-i386: fix abort on bad PML4E/PDPTE/PDE/PTE addresses
qapi: pad GenericList value fields to 64 bits
Message-id: 1370009905-4255-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini
# Via Paolo Bonzini
* bonzini/iommu-for-anthony: (22 commits)
memory: add return value to address_space_rw/read/write
memory: propagate errors on I/O dispatch
exec: just use io_mem_read/io_mem_write for 8-byte I/O accesses
memory: correctly handle endian-swapped 64-bit accesses
memory: split accesses even when the old MMIO callbacks are used
memory: add big endian support to access_with_adjusted_size
memory: accept mismatching sizes in memory_region_access_valid
memory: add address_space_access_valid
exec: implement .valid.accepts for subpages
memory: export memory_region_access_valid to exec.c
exec: introduce memory_access_size
exec: introduce memory_access_is_direct
exec: expect mr->ops to be initialized for ROM
memory: assign MemoryRegionOps to all regions
memory: move unassigned_mem_ops to memory.c
memory: add address_space_translate
memory: dispatch unassigned accesses based on .valid.accepts
exec: do not use error_mem_read
exec: make io_mem_unassigned private
cputlb: simplify tlb_set_page
...
Message-id: 1369947836-2638-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This function returns ${prefix}/var/RELATIVE_PATHNAME on POSIX-y systems,
and <CSIDL_COMMON_APPDATA>/RELATIVE_PATHNAME on Win32.
http://msdn.microsoft.com/en-us/library/bb762494.aspx
[...] This folder is used for application data that is not user
specific. For example, an application can store a spell-check
dictionary, a database of clip art, or a log file in the
CSIDL_COMMON_APPDATA folder. [...]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
With the introduction of native list types, we now have types such as
int64List where the 'value' field is not a pointer, but the actual
64-bit value.
On 32-bit architectures, this can lead to situations where 'next' field
offset in GenericList does not correspond to the 'next' field in the
types that we cast to GenericList when using the visit_next_list()
interface, causing issues when we attempt to traverse linked list
structures of these types.
To fix this, pad the 'value' field of GenericList and other
schema-defined/native *List types out to 64-bits.
This is less memory-efficient for 32-bit architectures, but allows us to
continue to rely on list-handling interfaces that target GenericList to
simply visitor implementations.
In the future we can improve efficiency by defaulting to using native C
array backends to handle list of non-pointer types, which would be more
memory efficient in itself and allow us to roll back this change.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The memory API is able to split it in two 4-byte accesses.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The old-style IOMMU lets you check whether an access is valid in a
given DMAContext. There is no equivalent for AddressSpace in the
memory API, implement it with a lookup of the dispatch tree.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We'll use it to implement address_space_access_valid.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using phys_page_find to translate an AddressSpace to a MemoryRegionSection
is unwieldy. It requires to pass the page index rather than the address,
and later memory_region_section_addr has to be called. Replace
memory_region_section_addr with a function that does all of it: call
phys_page_find, compute the offset within the region, and check how
big the current mapping is. This way, a large flat region can be written
with a single lookup rather than a page at a time.
address_space_translate will also provide a single point where IOMMU
forwarding is implemented.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason to avoid a recompile before accessing unassigned
memory. In the end it will be treated as MMIO anyway.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is never used, the IOTLB always goes through io_mem_notdirty.
In fact in softmmu_template.h, if it were, QEMU would crash just
below the tests, as soon as io_mem_read/write dispatches to
error_mem_read/write.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Paolo Bonzini (11) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony:
memory: clean up phys_page_find
memory: populate FlatView for new address spaces
memory: limit sections in the radix tree to the actual address space size
s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62
memory: fix address space initialization/destruction
memory: make memory_global_sync_dirty_bitmap take an AddressSpace
memory: do not duplicate memory_region_destructor_none
memory: Rename readable flag to romd_mode
memory: Replace open-coded memory_region_is_romd
memory: allow memory_region_find() to run on non-root memory regions
memory: assert that PhysPageEntry's ptr does not overflow
exec: eliminate stq_phys_notdirty
exec: make qemu_get_ram_ptr private
exec: eliminate qemu_put_ram_ptr
exec: remove obsolete comment
Message-id: 1369414987-8839-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The radix tree is statically sized to fit TARGET_PHYS_ADDR_SPACE_BITS.
If a larger memory region is registered, it will overflow.
Fix by limiting any section in the radix tree to the supported size.
This problem was not observed earlier since artificial regions (containers
and aliases) are eliminated by the memory core, leaving only device regions
which have reasonable sizes. An IOMMU however cannot be eliminated by the
memory core, and may have an artificial size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[ Fail the build if TARGET_PHYS_ADDR_SPACE_BITS is too large - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since this is a MemoryListener operation, it only makes sense
on an AddressSpace granularity.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"Readable" is a very unfortunate name for this flag because even a
rom_device region will always be readable from the guest POV. What
differs is the mapping, just like the comments had to explain already.
Also, readable could currently be understood as being a generic region
flag, but it only applies to rom_device regions.
So rename the flag and the function to modify it after the original term
"ROMD" which could also be interpreted as "ROM direct", i.e. ROM mode
with direct access. In any case, the scope of the flag is clearer now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
memory_region_find() is similar to registering a MemoryListener and
checking for the MemoryRegionSections that come from a particular
region. There is no reason for this to be limited to a root memory
region.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is a private interface between exec.c and memory.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Crosthwaite
Michael Roth
Wenchao Xia
Kevin Wolf
Anthony Liguori
Stefan Hajnoczi
Fam Zheng
Stefano Stabellini
Gerd Hoffmann
Michael S. Tsirkin
Laszlo Ersek
Hu Tao
Paolo Bonzini
Jordan Justen
Avi Kivity
Jan Kiszka