Previous commit added QMP documentation to the qemu-monitor.hx
file, it's is a copy of this information.
While it's good to keep it near code, maintaining two copies of
the same information is too hard and has little benefit as we
don't expect client writers to consult the code to find how to
use a QMP command.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This make sure we send a desktop resize message only in case we actually
have to, using the new variables which track the clients desktop size.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't send updates for screen areas which are outside the clients
desktop. May happed with vnc clients which don't support the desktop
resize message.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add two new variables to keep track of the vnc clients desktop size.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In case the desktop did resize while the vnc connection setup was still
in progress the client isn't informed about it. Send a desktop resize
event as soon as the client told us it can handle deskop resize via set
encodings message to make sure the client us up to date.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add support for tight encoding [1]. This patch only add support
for "basic" tight compression without any filter.
[1] http://tigervnc.org/cgi-bin/rfbproto#tight-encoding.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some encodings like tight supports tiling (spliting in
multiple sub-rectangles). So we needed a way to tell
vnc_update_client() how much rectangles are in the buffer.
zlib, raw and hextile always send a full rectangle.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Makes sure we free all ressources used in zlib encoding (zlib stream
and buffer).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a buffer_free() helper to free vnc buffers and
remove some duplicated code in vnc_disconnect_finish().
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On init, values are already NULL, but we shouldn't try
to reset them each time a client send a set encoding
command because this break everything. For example,
libvncclient re-send a set encoding command if the
framebuffer is resized.
This fix framebuffer resizing for zlib encoding.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
send_framebuffer_update() was calling hextile instead of zlib
since commit 70a4568fe0.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a small comment to explain why we need to start from
the end of the array to set the right prefered encoding.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch was wrong, because the loop was already reversed,
so the first encoding was correctly set at the end of the loopp.
This reverts commit 14eb8b6829.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Uses VNC_ENCODING_RICH_CURSOR. Adding XCURSOR support should be
possible without much trouble. Shouldn't be needed though as
RICH_CURSOR is a superset of XCURSOR.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
message is a hint by the client as to its preference (the first
encoding specified being most preferred)"
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 37c34d9d5d introduced a regression when
using relative mouse mode with a client that understands the PointerTypeChange
pseudo-encoding.
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Gerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will allow to implement new encodings (tight, zrle, ..)
in a cleaner way. This may hurt performances, because some
functions like vnc_convert_pixel are not static anymore, but
should not be a problem with gcc 4.5 and the new -flto.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The code processing incoming & sending outgoing messages from/to
clients used embedded magic numbers for all message IDs. This
made the code a little hard to follow. Add constants in the vnc.h
header file for all message IDs and use them in the code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When we switch to absolute mode, we send out a notification (if the client
supports it). Today, we only send this notification when the client sends us
a mouse event and we're in the wrong mode.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an option to disable the heuristics which try to keep
capslock and numlock state for guest and host in sync.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
During boot, the screen gets resized to height 1 and a mouse click at this
point will cause a division by zero when calculating the absolute pointer
position from the pixel (x, y). Return a click in the middle of the screen
instead in this case.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commits 376253ec..731b0364 introduced global variable cur_mon, which
points to the "default monitor" (if any), except during execution of
monitor_read() or monitor_control_read() it points to the monitor from
which we're reading instead (the "current monitor"). Monitor command
handlers run within monitor_read() or monitor_control_read().
Default monitor and current monitor are really separate things, and
squashing them together is confusing and error-prone.
For instance, usb_host_scan() can run both in "info usbhost" and
periodically via usb_host_auto_check(). It prints to cur_mon, which
is what we want in the former case: the monitor executing "info
usbhost". But since that's the default monitor in the latter case, it
periodically spams the default monitor there.
A few places use cur_mon to log stuff to the default monitor. If we
ever log something while cur_mon points to current monitor instead of
default monitor, the log temporarily "jumps" to another monitor.
Whether that can or cannot happen isn't always obvious.
Maybe logging to the default monitor (which may not even exist) is a
bad idea, and we should log to stderr or a logfile instead. But
that's outside the scope of this commit.
Change cur_mon to point to the current monitor. Create new
default_mon to point to the default monitor. Update users of cur_mon
accordingly.
This fixes the periodical spamming of the default monitor by
usb_host_scan(). It also stops "log jumping", should that problem
exist.
Use led status notification support in vnc.
The qemu vnc server keeps track of the capslock and numlock states based
on the key presses it receives from the vnc client. But this fails in
case the guests idea of the capslock and numlock state changes for other
reasons. One case is guest reboot (+ keyboard reset). Another case are
more recent windows versions which reset capslock state before
presenting the login screen.
Usually guests use the keyboard leds to signal the capslock and numlock
state to the user, so we can use this to better keep track of capslock
and numlock state in the qemu vnc server.
Also toggle the numlock and capslock states on keydown events (instead
of keyup). Guests do the same.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The combination of keymap support (-k option) and curses is currently
very broken. The patch below fixes it by first extending keymap support
to interpret the shift, ctrl, altgr and addupper keywords in keymaps,
and to fix curses into properly using keymaps.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Hi all,
this patch fixes another bug in vnc_refresh: calling vnc_update_client
might cause vs to be free()ed, in this case we cannot access vs->next
right after to examine the next item on the list.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's emitted when a VNC client session is activated by QEMU,
client's information such as port, IP and auth ID (if the
session is authenticated) are provided.
Event example:
{ "event": "VNC_INITIALIZED",
"timestamp": {"seconds": 1263475302, "microseconds": 150772},
"data": {
"server": { "auth": "sasl", "family": "ipv4",
"service": "5901", "host": "0.0.0.0"},
"client": { "family": "ipv4", "service": "46089",
"host": "127.0.0.1", "sasl_username": "lcapitulino" } } }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's emitted when a VNC client connects to QEMU, client's information
such as port and IP address are provided.
Note that this event is emitted right when the connection is
established. This means that it happens before authentication
procedure and session initialization.
Event example:
{ "event": "VNC_CONNECTED",
"timestamp": { "seconds": 1262976601, "microseconds": 975795 },
"data": {
"server": { "auth": "sasl", "family": "ipv4",
"service": "5901", "host": "0.0.0.0" },
"client": { "family": "ipv4", "service": "58425",
"host": "127.0.0.1" } } }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When a disconnection happens the client's socket on QEMU
side may become invalid, this way it won't be possible
to query it to get client information, which is going to
be needed by the future QMP VNC_DISCONNECTED event.
To always have this information available we query the
socket at connection time and cache the client info in
struct VncState.
Two function are introduced to perform this job.
vnc_client_cache_addr() is called right when the connection
is made, however the authentication information is not
available at that moment so vnc_client_cache_auth() is
called from protocol_client_init() to get auth info.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It contains the socket adress family name, like "ipv4" or
"ipv6".
This is useful for clients so that they can interpret the
'host' key reliably.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's the SASL username, so it's better to call it 'sasl_username'
to be consistent.
Note that this change wouldn't be allowed if QMP were stable.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is no reason to have it as optional and the code
in the server and client gets slightly simpler if the
key is mandatory.
While there also do some cleanup on how the server info is
collected.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently the 'status' key is a string whose value can be
"disabled" or "enabled", change it to the QMP's standard
'enabled' key, which is a bool.
Note that 'status' in being dropped and this wouldn't be
allowed if QMP were stable.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hi all,
calling vnc_update_client in vnc_refresh might have the unlikely side
effect of setting vd->timer = NULL, if the last vnc client disconnected.
In this case we have to return from vnc_refresh without updating the
timer, otherwise we cause a segfault.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Return a QDict with server information. Connected clients are returned
as a QList of QDicts.
The new functions (vnc_qdict_remote_addr(), vnc_qdict_local_addr() and
put_addr_qdict()) are used to insert 'host' and 'service' information
in the returned QDict.
This patch is big, but I don't see how to split it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The capslock tracking logic added by commit
6b1325029d doesn't work correctly for vnc
clients without EXT_KEY_EVENT support. The reason is that qemu converts
keysyms for letters to lowercase for the keysym2scancode lookup. It
then also passes the lowercase value down to do_key_event(), but the
capslock tracking code needs it with the correct case to work properly.
This patch adds a new variable for the lowercase keysym so we'll keep
the unmodified value for do_key_event().
The keysym2scancode is not needed with EXT_KEY_EVENT capable clients
like any app based on the gtk-vnc widget, so I missed that case in
testing ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file
descriptors that don't need to be passed to children to stop this misbehaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When capslock is toggled while the vnc window hasn't the focus qemu
will miss the state change. Add sanity checks for the capslock state
and toggle it if needed, so hosts and guests idea of capslock state
stay in sync. Simliar logic for numlock is present in qemu already.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Without this patch, qemu on windows crashes as soon
as a vnc client connects.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
After qemu_free, the pointers for input and output
buffers are no longer valid, so set them to NULL
(most other calls of qemu_free in vnc.c use this
pattern, too).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We are using the vs structure when it was just freed. Classic use after free,
fix it.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch introduces dynamic timer intervals: we slow down the refresh
rate when there in no much activity but we get back to a fast refresh
rate when the activity resume.
Please note that qemu_timer_expired is not an inline function any more
because I needed to call it from vnc.c however I don't think this change
should have any serious consequence.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
This patch removes the server surface from VncState and adds a single
server surface to VncDisplay for all the possible clients connected.
Each client maintains a different dirty bitmap in VncState.
The guest surface is moved to VncDisplay as well because we don't need
to track guest updates in more than one place.
This patch has been updated to handle CopyRect correctly and efficiently.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
