The current setting is much too pessimistic. Indicating only
the one or two registers that are actually assigned after a
call should avoid unnecessary movement between the register
array and the stack array.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return value to bool, because that's what is should
have been from the start. Pass the ct mask instead of the whole
TCGArgConstraint, as that's the only part that's relevant.
Change the value argument to int64_t. We will need the extra
width for 32-bit hosts wanting to match vector constants.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are two different versions of prototype for tcg_out_op and
tcg_out_vec_op functions:
1) using const TCGArg *args and const int *const_args arguments
2) using const TCGArg args[TCG_MAX_OP_ARGS] and const int
const_args[TCG_MAX_OP_ARGS] aguments.
This duality causes warnings on GCC 11 and prevents build using
--enable-werror. As second version provides more information,
unify functions prototypes to this variant.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <20210312121418.139093-1-mrezanin@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At the same time, validate the type argument in tcg_out_mov.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to split out bytecode output into helpers, but
we can't do that one at a time if tcg_out_op_t is being done
outside of the switch.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is unused. It's not even the disassembler,
which is print_insn_tci, located in disas/tci.c.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are currently using the "natural" size routine, which
uses 64-bits on a 64-bit host. The TCGMemOpIdx operand
has 11 bits, so we can safely reduce to 32-bits.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the correct set of asserts during code generation.
We do not require the first input to overlap the output;
the existing interpreter already supported that.
Split out tci_args_rrrbb in the translator.
Use the deposit32/64 functions rather than inline expansion.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert to indirect jumps, as it's less complicated.
Then we just have a pointer to the tb address at which
the chain is stored, from which we read.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not emit a uint64_t, but a tcg_target_ulong, aka uintptr_t.
This reduces the size of the constant on 32-bit hosts.
The assert for label != NULL has to be removed because that
is a valid value for exit_tb.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 5/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-6-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 4/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 3/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 2/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 1/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict all operands to registers. All constants will be forced
into registers by the middle-end. Removing the difference in how
immediate integers were encoded will allow more code to be shared
between 32-bit and 64-bit operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This was removed from tcg_target_reg_alloc_order and
tcg_target_call_iarg_regs on the assumption that it
was the stack. This was incorrectly copied from i386.
For tci, the stack is R15.
By adding R4 back to tcg_target_call_iarg_regs, adjust the other
entries so that 6 (or 12) entries are still present in the array,
and adjust the numbers in the interpreter.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As noted in several comments, 8 regs is not enough for 32-bit
to perform calls, as currently implemented. Shortly, we will
rearrange the encoding which will make 32 regs impossible.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Trivially implemented like other arithmetic.
Tested via check-tcg and the ppc64 target.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not simultaneously support div and div2 -- it's one
or the other. TCI is already using div, so remove div2.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The existing check was incomplete:
(1) Only applied to two of the 7 stores, and not to the loads at all.
(2) Only checked the upper, but not the lower bound of the stack.
Doing this at compile time means that we don't need to do it
at runtime as well.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This requires finishing the conversion to tcg_target_op_def.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The opcodes always exist, regardless of whether or not they
are enabled. Remove the unnecessary ifdefs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are identical to the 'r' constraint.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are now completely covered by mov from a
TYPE_CONST temporary.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The normal movi opcodes are going away. We need something
for TCI to use internally.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We must change all targets at once, since all must match
the declaration in tcg.c.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This wasn't actually used for anything, really. All variable
operands must accept registers, and which are indicated by the
set in TCGArgConstraint.regs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The union is unused; let "regs" appear in the main structure
without the "u.regs" wrapping.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
