There have some code style problems be found when read the block driver code.
So I fixes some problems of this error, ERROR: "foo* bar" should be "foo *bar".
Signed-off-by: Liyang Shi <shiliyang@huawei.com>
Reported-by: Euler Robot <euler.robot@huawei.com>
Message-Id: <3211f389-6d22-46c1-4a16-e6a2ba66f070@huawei.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_default_perms() can decide which permission profile to use based on
the BdrvChildRole, so block drivers do not need to select it explicitly.
The blkverify driver now no longer shares the WRITE permission for the
image to verify. We thus have to adjust two places in
test-block-iothread not to take it. (Note that in theory, blkverify
should behave like quorum in this regard and share neither WRITE nor
RESIZE for both of its children. In practice, it does not really
matter, because blkverify is used only for debugging, so we might as
well keep its permissions rather liberal.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-30-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commonly, they need to pass the BDRV_CHILD_IMAGE set as the
BdrvChildRole; but there are exceptions for drivers with external data
files (qcow2 and vmdk).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-26-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, it is always set to 0. Later patches in this series will
ensure that all callers pass an appropriate combination of flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to unify child_format and child_file at some point. One of the
important things that set format drivers apart from other drivers is
that they do not expect other format nodes under them (except in the
backing chain), i.e. we must not probe formats inside of formats. That
means we need something on which to distinguish format drivers from
others, and hence this flag.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200513110544.176672-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace instances of:
(n & (BDRV_SECTOR_SIZE - 1)) == 0
And:
(n & ~BDRV_SECTOR_MASK) == 0
With:
QEMU_IS_ALIGNED(n, BDRV_SECTOR_SIZE)
Which reveals the intent of the code better, and makes it easier to
locate the code checking alignment.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20190827185913.27427-2-nsoffer@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
The dmg file has many tables which describe: "start from sector XXX to
sector XXX, the compression method is XXX and where the compressed data
resides on".
Each sector in the expanded file should be covered by a table. The table
will describe the offset of compressed data (or raw depends on the type)
in the dmg.
For example:
[-----------The expanded file------------]
[---bzip table ---]/* zeros */[---zlib---]
^
| if we want to read this sector.
we will find bzip table which contains this sector, and get the
compressed data offset, read it from dmg, uncompress it, finally write to
expanded file.
If we skip zero chunk (table), some sector cannot find the table which
will cause search_chunk() return s->n_chunks, dmg_read_chunk() return -1
and finally causing dmg_co_preadv() return EIO.
See:
[-----------The expanded file------------]
[---bzip table ---]/* zeros */[---zlib---]
^
| if we want to read this sector.
Oops, we cannot find the table contains it...
In the original implementation, we don't have zero table. When we try to
read sector inside the zero chunk. We will get EIO, and skip reading.
After this patch, we treat zero chunk the same as ignore chunk, it will
directly write zero and avoid some sector may not find the table.
After this patch:
[-----------The expanded file------------]
[---bzip table ---][--zeros--][---zlib---]
Signed-off-by: yuchenlin <npes87184@gmail.com>
Reviewed-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103114700.9686-4-npes87184@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There is a possible hang in original binary search implementation. That is
if chunk1 = 4, chunk2 = 5, chunk3 = 4, and we go else case.
The chunk1 will be still 4, and so on.
Signed-off-by: yuchenlin <npes87184@gmail.com>
Message-id: 20190103114700.9686-2-npes87184@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a trivial patch to fix a wrong value for block terminator.
The old value was 0x7fffffff which is wrong. It was not affecting the
code because QEMU dmg block is not handling block terminator right now.
Neverthless, it should be fixed.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: yuchenlin <yuchenlin@synology.com>
Message-id: 20181228145055.18039-1-jcfaracco@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This change is better to understand what kind of block type is being
handled by the code. Using a syntax similar to the DMG documentation is
easier than tracking all hex values assigned to a block type.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit includes the support to new module dmg-lzfse into dmg block
driver. It includes the support for block type ULFO (0x80000007).
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some block drivers have traditionally changed their node to read-only
mode without asking the user. This behaviour has been marked deprecated
since 2.11, expecting users to provide an explicit read-only=on option.
Now that we have auto-read-only=on, enable these drivers to make use of
the option.
This is the only use of bdrv_set_read_only(), so we can make it a bit
more specific and turn it into a bdrv_apply_auto_read_only() that is
more convenient for drivers to use.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_set_read_only() is used by some block drivers to override the
read-only option given by the user. This is not how read-only images
generally work in QEMU: Instead of second guessing what the user really
meant (which currently includes making an image read-only even if the
user didn't only use the default, but explicitly said read-only=off), we
should error out if we can't provide what the user requested.
This adds deprecation warnings to all callers of bdrv_set_read_only() so
that the behaviour can be corrected after the usual deprecation period.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
A few block drivers will set the BDS read_only flag from their
.bdrv_open() function. This means the bs->read_only flag could
be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ
flag check occurs prior to the call to bdrv->bdrv_open().
This adds an error return to bdrv_set_read_only(), and an error will be
return if we try to set the BDS to read_only while copy_on_read is
enabled.
This patch also changes the behavior of vvfat. Before, vvfat could
override the drive 'readonly' flag with its own, internal 'rw' flag.
For instance, this -drive parameter would result in a writable image:
"-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on"
This is not correct. Now, attempting to use the above -drive parameter
will result in an error (i.e., 'rw' is incompatible with 'readonly=on').
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com
We have a helper wrapper for checking for the BDS read_only flag,
add a helper wrapper to set the read_only flag as well.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com
This makes use of the .bdrv_child_perm() implementation for formats that
we just added. All format drivers expose the permissions they actually
need nows, so that they can be set accordingly and updated when parents
are attached or detached.
The only format not included here is raw, which was already converted
with the other filter drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
The way that attaching bs->file worked was a bit unusual in that it was
the only child that would be attached to a node which is not opened yet.
Because of this, the block layer couldn't know yet which permissions the
driver would eventually need.
This patch moves the point where bs->file is attached to the beginning
of the individual .bdrv_open() implementations, so drivers already know
what they are going to do with the child. This is also more consistent
with how driver-specific children work.
For a moment, bdrv_open() gets its own BdrvChild to perform image
probing, but instead of directly assigning this BdrvChild to the BDS, it
becomes a temporary one and the node name is passed as an option to the
drivers, so that they can simply use bdrv_open_child() to create another
reference for their own use.
This duplicated child for (the not opened yet) bs is not the final
state, a follow-up patch will change the image probing code to use a
BlockBackend, which is completely independent of bs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
dmg.o was moved to block-obj-m in 5505e8b76 to become a separate module,
so that its reference to libbz2, since 6b383c08c, doesn't add an extra
library to the main executable.
Until recently, commit 06e60f70a (blockdev: Add dynamic module loading
for block drivers) moved it back to block-obj-y to simplify the design
of dynamic loading of block modules. But we don't want to lose the
feature of less library dependency on the main executable.
The solution here is to move only the bz2 related code to a separate
DSO file, and load it when dmg_open is called.
dmg_probe doesn't depend on bz2 support to work, and is the only code in
this file which can run before dmg_open.
While we are at it, fix the unhelpful cast of last argument passed to
dmg_uncompress_bz2.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1473043845-13197-4-git-send-email-famz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Using int for values that are only used as booleans is confusing.
While at it, rearrange a couple of members so that all the bools
are contiguous.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It makes more sense to have ALL block size limit constraints
in the same struct. Improve the documentation while at it.
Simplify a couple of conditionals, now that we have audited and
documented that request_alignment is always non-zero.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to eventually stick request_alignment alongside other
BlockLimits, but first, we must ensure it is populated at the
same time as all other limits, rather than being a special case
that is set only when a block is first opened.
Add a .bdrv_refresh_limits() to all four of our legacy devices
that will always be sector-only (bochs, cloop, dmg, vvfat), in
spite of their recent conversion to expose a byte interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This implements .bdrv_co_preadv() for the cloop block driver. While
updating the error paths, change -1 to a valid -errno code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch removes the temporary duplication between bs->file and
bs->file_child by converting everything to BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Disk images may contain large all-zeroes gaps (1.66k sectors or 812 MiB
is seen in the real world). These blocks (type 2) do not need to be
extracted into a temporary buffer, there is no need to allocate memory
for these blocks nor to check its length.
(For the test image, the maximum uncompressed size is 1054371 bytes,
probably for a bzip2-compressed block.)
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1420566495-13284-13-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds support for bzip2-compressed block entries as introduced
with OS X 10.4 (source: https://en.wikipedia.org/wiki/Apple_Disk_Image).
It was tested against a 5.2G "OS X Yosemite" installation image which
stores the BLXX block in the XML property list (instead of resource
forks) and has over 5k chunks.
New configure entries are added (--enable-bzip2 / --disable-bzip2) to
control inclusion of bzip2 functionality (which requires linking against
libbz2). The help message suggests that this option is needed for DMG
files, but the tests are generic enough that other parts of QEMU can use
bzip2 if needed.
The identifiers are based on http://newosxbook.com/DMG.html.
The decompression routines are based on the zlib case, but as there is
no way to reset the decompression state (unlike zlib), memory is
allocated and deallocated for every decompression. This should not be
problematic as the decompression takes most of the time and as blocks
are typically about/over 1 MiB in size, only one allocation is done
every 2000 sectors.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1420566495-13284-12-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation for adding bzip2 support, split the type check into a
separate function. Make all offsets relative to the begin of a chunk
such that it is easier to recognize the position without having to
add up all offsets. Some comments are added to describe the fields.
There is no functional change.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1420566495-13284-11-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previously the sector table parsing relied on the previous offset of
the DMG file. Now it uses the sector number from the BLKX header
(see http://newosxbook.com/DMG.html).
The implementation of dmg2img (from vu1tur) does not base the output
sector on the location of the terminator (0xffffffff) either so it
should be safe to drop this dependency on the previous state.
(It makes somehow makes sense, a terminator should halt further
processing of a block and is perhaps used to preallocate some space.)
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1420566495-13284-10-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch addresses two issues:
- The data fork offset was not taken into account, resulting in failure
to read an InstallESD.dmg file (5164763151 bytes) which had a
non-zero DataForkOffset field.
- The offset of the previous block ("partition") was unconditionally
added to the current block because older files would start the input
offset of a new block at zero. Newer files (including vlc-2.1.5.dmg,
tuxpaint-0.9.15-macosx.dmg and OS X Yosemite [MAS].dmg) failed in
reads because these files have chunk offsets, relative to the begin
of a data fork.
Now the data offset of the mish is taken into account. While we could
check that the data_offset is within the data fork, let's not do that
here as it would only result in parse failures on invalid files (rather
than gracefully handling such bad files). dmg_read will error out if
the offset is incorrect.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1420566495-13284-9-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Right now the virtual size is always reported as zero which makes it
impossible to convert between formats.
After this patch, the number of sectors will be read from the trailer
("koly" block).
To verify the behavior, the output of `dmg2img foo.dmg foo.img` was
compared against `qemu-img convert -f dmg -O raw foo.dmg foo.raw`. The
tests showed that the file contents are exactly the same, except that
QEMU creates a slightly larger file (it matches the total sectors
count).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1420566495-13284-8-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The format is simple enough to avoid using a full-blown XML parser. It
assumes that all BLKX items begin with the "mish" magic word, therefore
it is not a problem if other values get matched which are not a BLKX
block.
The offsets are based on the description at
http://newosxbook.com/DMG.html
For compatibility with glib 2.12, use g_base64_decode (which
additionally requires an extra buffer allocation) instead of
g_base64_decode_inplace (which is only available since glib 2.20).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1420566495-13284-7-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previously the chunk size was not checked, allowing for a large memory
allocation. This patch checks whether the chunks size is within the
resource fork length, and whether the resource fork is below the
trailer of the dmg file.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1420566495-13284-6-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As the decoded plist XML is not a pointer in the file,
dmg_read_mish_block must be able to process a buffer instead of a file
pointer. Since the full buffer must be processed, let's change the
return value again to just a success flag.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1420566495-13284-5-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Besides the offset, also read the resource length. This length is now
used in the extracted function to verify the end of the resource fork
against "count" from the resource fork.
Instead of relying on the value of offset to conclude whether the
resource fork is available or not (info_begin==0), check the
rsrc_fork_length instead. This would allow a dmg file to begin with a
resource fork. This seemingly unnecessary restriction was found while
trying to craft a DMG file by hand.
Other changes:
- Do not require resource data offset to be 0x100 (but check that it
is within bounds though).
- Further improve boundary checking (resource data must be within
the resource fork).
- Use correct value for resource data length (spotted by John Snow)
- Consider the resource data offset when determining info_end.
This fixes an EINVAL on the tuxpaint dmg example.
The resource fork format is documented at
https://developer.apple.com/legacy/library/documentation/mac/pdf/MoreMacintoshToolbox.pdf#page=151
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1420566495-13284-4-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Extract the mish block decoder such that this can be used for other
formats in the future. A new DmgHeaderState struct is introduced to
share state while decoding.
The code is kept unchanged as much as possible, a "fail" label is added
for example where a simple return would probably do. In dmg_open, the
variable "tmp" is renamed to "rsrc_data_offset" for clarity and comments
have been added explaining various data.
Note that this patch has one subtle difference with the previous
version which should not affect functionality. In the previous code,
the end of a resource was inferred from the mish block (the offsets
would be increased by the fields). In this patch, the resource length
is used instead to avoid the need to rely on the previous offsets.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1420566495-13284-3-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
DMG files have a variable length with a UDIF trailer at the end of a
file. This UDIF trailer is essential as it describes the contents of
the image. At the moment however, the start of this trailer is almost
always incorrect as bdrv_getlength() returns a multiple of the block
size (rounded up). This results in a failure to recognize DMG files,
resulting in Invalid argument (EINVAL) errors.
As there is no API to retrieve the real file size, look for the magic
header in the last two sectors to find the start of this 512-byte UDIF
trailer (the "koly" block).
The resource fork offset ("info_begin") has its offset adjusted as the
initial value of offset does not mean "end of file" anymore, but "begin
of UDIF trailer".
[Replaced error_set(errp, ERROR_CLASS_GENERIC_ERROR, ...) with
error_setg(errp, ...) as discussed with Peter.
--Stefan]
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1420566495-13284-2-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the dmg block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Instead of blindly relying on a normal integer having a width of 32 bits
(which is a pretty good assumption, but we should not rely on it if
there is no need), use the correct format string macros.
This does not touch DEBUG output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Both compressed and uncompressed I/O is buffered. dmg_open() calculates
the maximum buffer size needed from the metadata in the image file.
There is currently a buffer overflow since ->lengths[] is accounted
against the maximum compressed buffer size but actually uses the
uncompressed buffer:
switch (s->types[chunk]) {
case 1: /* copy */
ret = bdrv_pread(bs->file, s->offsets[chunk],
s->uncompressed_chunk, s->lengths[chunk]);
We must account against the maximum uncompressed buffer size for type=1
chunks.
This patch fixes the maximum buffer size calculation to take into
account the chunk type. It is critical that we update the correct
maximum since there are two buffers ->compressed_chunk and
->uncompressed_chunk.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The DMG metadata is stored as uint64_t, so use the same type for
sector_num. int was a particularly poor choice since it is only 32-bit
and would truncate large values.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Chunk length and sectorcount are used for decompression buffers as well
as the bdrv_pread() count argument. Ensure that they have reasonable
values so neither memory allocation nor conversion from uint64_t to int
will cause problems.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the right types instead of signed int:
size_t new_size;
This is a byte count for g_realloc() that is calculated from uint32_t
and size_t values.
uint32_t chunk_count;
Use the same type as s->n_chunks, which is used together with
chunk_count.
This patch is a cleanup and does not fix bugs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is not necessary to check errno for EINTR and the block layer does
not produce short reads. Therefore we can drop the loop that attempts
to read a compressed chunk.
The loop is buggy because it incorrectly adds the transferred bytes
twice:
do {
ret = bdrv_pread(...);
i += ret;
} while (ret >= 0 && ret + i < s->lengths[chunk]);
Luckily we can drop the loop completely and perform a single
bdrv_pread().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
shiliyang