Similar to how qemu_co_sleep_ns() allows preemption from an external
coroutine entry, allow reentering qio_channel_yield() early.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the ability for a caller to wait for completion of the
background thread to synchronously dispatch its result, without
needing to wait for the main loop to run the idle callback.
This method needs very careful usage to avoid a dangerous
race condition with the free'ing of the task. The completion
callback is normally invoked from an idle callback registered
with the main loop context. The qio_task_wait_thread method
must only be called if the completion callback has not yet
run. The only safe way to achieve this is to run the
qio_task_wait_thread method from the thread that executes
the main loop.
It is generally a bad idea to use this method since it will
block execution of the main loop, however, the design of
the character devices and its usage from vhostuser already
requires blocking execution.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-3-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
GNUTLS takes a paranoid approach when seeing 0 bytes returned by the
underlying OS read() function. It will consider this an error and
return GNUTLS_E_PREMATURE_TERMINATION instead of propagating the 0
return value. It expects apps to arrange for clean termination at
the protocol level and not rely on seeing EOF from a read call to
detect shutdown. This is to harden apps against a malicious 3rd party
causing termination of the sockets layer.
This is unhelpful for the QEMU NBD code which does have a clean
protocol level shutdown, but still relies on seeing 0 from the I/O
channel read in the coroutine handling incoming replies.
The upshot is that when using a plain NBD connection shutdown is
silent, but when using TLS, the client spams the console with
Cannot read from TLS channel: Broken pipe
The NBD connection has, however, called qio_channel_shutdown()
at this point to indicate that it is done with I/O. This gives
the opportunity to optimize the code such that when the channel
has been shutdown in the read direction, the error code
GNUTLS_E_PREMATURE_TERMINATION gets turned into a '0' return
instead of an error.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181119134228.11031-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
A new parameter "context" is added to qio_channel_tls_handshake() is to
allow the TLS to be run on a non-default context. Still, no functional
change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have worked on qio_task_run_in_thread() already. Further, let
all the qio channel APIs use that context.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qio_task_run_in_thread() allows main thread to run blocking operations
in the background. However it has an assumption on that it's always
working with the default context. This patch tries to allow the threaded
QIO task framework to run with non-default gcontext.
Currently no functional change so far, so the QIOTasks are still always
running on main context.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Originally we were storing the GSources tag IDs. That'll be not enough
if we are going to support non-default gcontext for QIO code. Switch to
GSources without changing anything real. Now we still always pass in
NULL, which means the default gcontext.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, introduce an internal qio_channel_add_watch_full(), which
enhances qio_channel_add_watch() that context can be specified.
Then add a new API wrapper qio_channel_add_watch_source() to return a
GSource pointer rather than a tag ID.
Note that the _source() call will keep a reference of GSource so that
callers need to unref them explicitly when finished using the GSource.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
The code wrongly passes the mode to open() only if O_WRONLY is set.
Instead, the mode should be passed when O_CREAT is set (or O_TMPFILE on
Linux). Fix this by always passing the mode since open() will correctly
ignore the mode if it is not needed. Add a testcase which exercises this
bug and also change the existing testcase to check that the mode of the
created file is correct.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The existing QIOChannelSocket class provides the ability to
listen on a single socket at a time. This patch introduces
a QIONetListener class that provides a higher level API
concept around listening for network services, allowing
for listening on multiple sockets.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently most outbound I/O on the websock channel gets copied into the
rawoutput buffer, and then immediately copied again into the encoutput
buffer, with a header prepended. Now that qio_channel_websock_encode
accepts a struct iovec, we can trivially remove this bounce buffering
and write directly to encoutput.
In doing so, we also now correctly validate the encoutput size against
the QIO_CHANNEL_WEBSOCK_MAX_BUFFER limit.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We must ensure we don't get flooded with ping replies if the outbound
channel is slow. Currently we do this by keeping the ping reply in a
separate temporary buffer and only writing it if the encoutput buffer
is completely empty. This is overly pessimistic, as it is reasonable
to add a ping reply to the encoutput buffer even if it has previous
data in it, as long as that previous data doesn't include a ping
reply.
To track this better, put the ping reply directly into the encoutput
buffer, and then record the size of encoutput at this time in
pong_remain. As we write encoutput to the underlying channel, we
can decrement the pong_remain counter. Once it hits zero, we can
accept further ping replies for transmission.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an immediate ping reply (pong) to the outgoing stream when a ping
is received. Unsolicited pongs are ignored.
Signed-off-by: Brandon Carpenter <brandon.carpenter@cypherpath.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Allows fragmented binary frames by saving the previous opcode. Handles
the case where an intermediary (i.e., web proxy) fragments frames
originally sent unfragmented by the client.
Signed-off-by: Brandon Carpenter <brandon.carpenter@cypherpath.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some callers want to distinguish between clean EOF (no bytes read)
vs. a short read (at least one byte read, but EOF encountered
before reaching the desired length), as it allows clients the
ability to do a graceful shutdown when a server shuts down at
defined safe points in the protocol, rather than treating all
shutdown scenarios as an error due to EOF. However, we don't want
to require all callers to have to check for early EOF. So add
another wrapper function that can be used by the callers that care
about the distinction.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170905191114.5959-3-eblake@redhat.com>
Acked-by: Daniel P. Berrange <berrange@redhat.com>
These functions wait until they are able to read / write the full
requested data buffer(s).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Support separate coroutines for reading and writing, and place the
read/write handlers on the AioContext that the QIOChannel is registered
with.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213135235.12274-7-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is in preparation for making qio_channel_yield work on
AioContexts other than the main one.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213135235.12274-6-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently DNS resolution is done automatically as part
of the creation of a QIOChannelSocket object instance.
This works ok for network clients where you just end
up a single network socket, but for servers, the results
of DNS resolution may require creation of multiple
sockets.
Introducing a DNS resolver API allows DNS resolution
to be separated from the socket object creation. This
will make it practical to create multiple QIOChannelSocket
instances for servers.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now that task objects have a directly associated error,
there's no need for an an Error **errp parameter to
the QIOTask thread worker function. It already has a
QIOTask object, so can directly set the error on it.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the QIOTaskFunc signature takes an Object * for
the source, and an Error * for any error. We also need to
be able to provide a result pointer. Rather than continue
to add parameters to QIOTaskFunc, remove the existing
ones and simply pass the QIOTask object instead. This
has methods to access all the other data items required
in the callback impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when a task fails, the error is never explicitly
associated with the task object, it is just passed along
through the completion callback. This adds the ability to
explicitly associate an error with the task.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently there is no data associated with a successful
task completion. This adds an opaque pointer to the task
to store an arbitrary result.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The GDestroyNotify parameter is already a pointer, so does
not need a '*' suffix on the type.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Incrementing the reference in qio_task_get_source is
not necessary, since we're not running concurrently
with any other code touching the QIOTask. This
minimizes chances of further memory leaks.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The GSource object has ability to have a name, which is useful
when debugging performance problems with the mainloop event
callbacks that take too long. By associating a name with a
QIOChannel object, we can then set the name on any GSource
associated with the channel.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Testing QIOChannel feature support can be done with a helper called
qio_channel_has_feature(). Setting feature support, however, was
done manually with a logical OR. This patch introduces a new helper
called qio_channel_set_feature() and makes use of it where applicable.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When QIOChannels were introduced in 666a3af9, the feature bits were
already defined shifted. However, when using them, the code was shifting
them again. The incorrect use was consistent until 74b6ce43, where
QIO_CHANNEL_FEATURE_LISTEN was defined shifted but tested unshifted.
This patch changes the definition to be unshifted and fixes the
incorrect usage introduced on 74b6ce43.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rather than rolling our own clone via an expensive conversion
in and back out of QObject, use the new clone visitor.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-15-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
On Win32 we cannot directly poll on socket handles. Instead we
create a Win32 event object and associate the socket handle with
the event. When the event signals readyness we then have to
use select to determine which events are ready. Creating Win32
events is moderately heavyweight, so we don't want todo it
every time we create a GSource, so this associates a single
event with a QIOChannel.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Sockets are not in the same namespace as file descriptors on Windows.
As an initial step, introduce separate APIs for file descriptor and
socket watches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
NB: If this commit breaks compilation for your out-of-tree
patchseries or fork, then you need to make sure you add
#include "qemu/osdep.h" to any new .c files that you have.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
The QIOChannelBuffer struct uses a 'char *' for its data
buffer. It will give simpler type compatibility with the
migration APIs if it uses 'uint8_t *' instead, avoiding
several casts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Depending on what object a file descriptor refers to a different
type of IO channel will be needed - either a QIOChannelFile or
a QIOChannelSocket. Introduce a qio_channel_new_fd() method
which will return the appropriate channel implementation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the docs for qio_channel_socket_connect_async,
qio_channel_socket_listen_async and
qio_channel_socket_dgram_async, mention that the
SocketAddress parameters are copied, so can be freed
immediately.
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that is capable of performing I/O
to/from a memory buffer. This implementation does not attempt
to support concurrent readers & writers. It is designed for
serialized access where by a single thread at a time may write
data, seek and then read data back out.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that is capable of performing I/O
to/from a separate process, via a pair of pipes. The command
can be used for unidirectional or bi-directional I/O.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that can run the websocket protocol over
the top of another QIOChannel instance. This initial implementation
is only capable of acting as a websockets server. There is no support
for acting as a websockets client yet.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that can run the TLS protocol over
the top of another QIOChannel instance. The object provides a
simplified API to perform the handshake when starting the TLS
session. The layering of TLS over the underlying channel does
not have to be setup immediately. It is possible to take an
existing QIOChannel that has done some handshake and then swap
in the QIOChannelTLS layer. This allows for use with protocols
which start TLS right away, and those which start plain text
and then negotiate TLS.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
