Allows to switch the (vga mode) framebuffer into bigendian mode
by setting the property, simliar to stdvga.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200928085335.21961-2-kraxel@redhat.com
With upcoming Spice server version 0.14.4, the monitor configuration can
contain additional fields for the monitor physical dimensions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduced in commit 9c956e6461 ("spice:
prepare for upcoming spice-server change"), the new logic never
materialized in the spice server source tree. Let's remove it for now,
until it actually changes in Spice.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-5-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The following patch is going to introduce extra fields / details to
UIInfo. Add a getter and keep the current values, instead of memset(0)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace dpi with width_mm/height_mm in qemu_edid_info.
Use it when set (non-zero) to compute the DPI and generate the EDID.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Divide the resolution by the DPI, and multiply to mm.
Note the computation done for edid[21/22] is correct (in cm).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When resetting virtio-gpu, virgl_renderer_reset() should be
called to ensure that the virglrenderer status is correct.
Signed-off-by: Guoqing Zhang <zhangguoqing.kernel@bytedance.com>
Reviewed-by: Qi Liu<liuqi.16@bytedance.com>
Message-id: 20200918111632.37354-1-zhangguoqing.kernel@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vu_panic() is not guaranteed to exit the program. Return early when
errors are encountered.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200921113420.154378-3-stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vu_panic() is not guaranteed to exit the program. Return early when
errors are encountered.
Note that libvhost-user does not have an "unmap" operation for mapped
descriptors. Therefore it is correct to return without explicit cleanup.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200921113420.154378-2-stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200813165125.59928-1-liq3ea@163.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 5f503cd9f3 ("virtio-pmem: add virtio device")
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
In the previously applied commit ("piix4: don't reserve hw resources when
hotplug is off globally"), we make changes to the ACPI DSDT tables
such that some ACPI code are not generated when bsel is absent. Since
as of this point in time, in q35 machines, we do not use bsel for pci
buses, we need to update the DSDT table blobs.
This patch updates the DSDT golden master tables for q35 machines.
At the same time, we clear bios-tables-test-allowed-diff.h for future
changes which update tables.
Following is a typical diff between the q35 acpi DSDT table blobs:
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/q35/DSDT, Tue Sep 15 18:52:47 2020
+ * Disassembly of /tmp/aml-3O0DR0, Tue Sep 15 18:52:47 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00001DFE (7678)
+ * Length 0x00001DF6 (7670)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0xAC
+ * Checksum 0x17
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -3113,24 +3113,20 @@
Name (_ADR, 0x00010000) // _ADR: Address
Method (_S1D, 0, NotSerialized) // _S1D: S1 Device State
{
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
-
- Method (PCNT, 0, NotSerialized)
- {
- }
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-12-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When acpi hotplug is turned off for both root pci bus as well as for pci
bridges, we should not generate the related ACPI code for DSDT table or
initialize related hw ports or reserve hw resources. This change makes
sure all those operations are turned off in the case ACPI pci hotplug is
off globally.
In this change, we also make sure ACPI code for the PCNT method are only
added when bsel is enabled for the corresponding pci bus or bridge hotplug
is turned on.
As q35 machines do not use bsel for it's pci buses at this point in time, this
change affects DSDT acpi table for q35 machines as well. Therefore, we will
also need to commit the updated golden master DSDT table acpi binary blobs as
well. Following is the list of blobs which needs updating:
tests/data/acpi/q35/DSDT
tests/data/acpi/q35/DSDT.acpihmat
tests/data/acpi/q35/DSDT.bridge
tests/data/acpi/q35/DSDT.cphp
tests/data/acpi/q35/DSDT.dimmpxm
tests/data/acpi/q35/DSDT.ipmibt
tests/data/acpi/q35/DSDT.memhp
tests/data/acpi/q35/DSDT.mmio64
tests/data/acpi/q35/DSDT.numamem
tests/data/acpi/q35/DSDT.tis
These tables are updated in the following commit. Without the updated table
blobs, the unit tests would fail with this patch.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-11-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following patch ("piix4: don't reserve hw resources when
hotplug is off globally") modifies certain ACPI tables for q35 machines.
This patch adds those table names to tests/qtest/bios-tables-test-allowed-diff.h
so that unit tests continue to pass and bisection is not broken.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-10-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change adds a new unit test for the global flag
'acpi-pci-hotplug-with-bridge-support' which is available for cold plugged pci
bridges in i440fx. The flag can be used to turn off ACPI based hotplug support
on all pci bridges.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-8-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The file 'tests/data/acpi/pc/DSDT.hpbridge' is a newly added acpi table file
for testing the pci bridge option 'acpi-pci-hotplug-with-bridge-support' under
i440fx. This change documents this fact.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-7-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cold plugged bridges are not hot unpluggable, even when their hotplug
property (acpi-pci-hotplug-with-bridge-support) is turned off. Please see
the function acpi_pcihp_pc_no_hotplug(). However, with
the current implementaton, Windows would try to hot-unplug a pci bridge when
it's hotplug switch is off. This is regardless of whether there are devices
attached to the bridge. This is because we add ACPI code like _EJ0 etc for the
pci slot where the bridge is cold plugged.
In this fix, we identify a cold plugged bridge and for cold plugged bridges,
we do not add the appropriate ACPI methods that are used by the OS
to identify a hot-pluggable/unpluggable pci device. After this change, Windows
does not detect the cold plugged pci bridge as ejectable.
As a result of the patch, the following are the changes to the DSDT ACPI
table:
@@ -858,38 +858,33 @@
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
Device (S18)
{
- Name (_SUN, 0x03) // _SUN: Slot User Number
Name (_ADR, 0x00030000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
}
Device (S20)
{
Name (_SUN, 0x04) // _SUN: Slot User Number
Name (_ADR, 0x00040000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Device (S28)
{
Name (_SUN, 0x05) // _SUN: Slot User Number
Name (_ADR, 0x00050000) // _ADR: Address
@@ -1148,37 +1143,32 @@
PCEJ (BSEL, _SUN)
}
}
Device (SF8)
{
Name (_SUN, 0x1F) // _SUN: Slot User Number
Name (_ADR, 0x001F0000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Method (DVNT, 2, NotSerialized)
{
- If ((Arg0 & 0x08))
- {
- Notify (S18, Arg1)
- }
-
If ((Arg0 & 0x10))
{
Notify (S20, Arg1)
}
If ((Arg0 & 0x20))
{
Notify (S28, Arg1)
}
If ((Arg0 & 0x40))
{
Notify (S30, Arg1)
}
If ((Arg0 & 0x80))
While at it, I have also updated a stale comment.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Suggested-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When ACPI hotplug for the root bus is disabled, the bsel property for that
bus is not set. Please see the following commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus").
As a result, when acpi_pcihp_find_hotplug_bus() is called
with bsel set to 0, it may return the root bus. This can cause devices
attached to the root bus to get hot-unplugged if the user issues the following
set of commmands:
outl 0xae10 0
outl 0xae08 your_slot
Thanks to Julia for pointing this out here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg734548.html
In this patch, we fix the issue in this function by checking if the bus which
is returned by the function is actually hotpluggable. If not, we simply return
NULL. This avoids the scenario where we were returning a non-hotpluggable bus.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ability to turn hotplug off on the pci root bus for i440fx was added in commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus")
This change adds a unit test in order to test this feature.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A new binary acpi table tests/data/acpi/pc/DSDT.roothp is added in order to
unit test the feature flag that can disable/enable root pci bus hotplug on
i440fx. This feature was added with the commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on
the root bus")
This change documents the fact that this new file addition was made as a part
of the unit test change.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fore-commit(c6beefd674) only saves features of queue0,
this makes wrong features of other queues in multiqueues
situation.
For examples:
qemu-system-aarch64 ... \
-chardev socket,id=charnet0,path=/var/run/vhost_sock \
-netdev vhost-user,chardev=charnet0,queues=2,id=hostnet0 \
...
There are two queues in nic assocated with one chardev.
When chardev is reconnected, it is necessary to save and
restore features of all queues.
Signed-of-by: Haibin Zhang <haibinzhang@tencent.com>
Message-Id: <46CBC206-E0CA-4249-81CD-10F75DA30441@tencent.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-4-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The SMBIOS 2.1 entry point uses a uint16 data type for reporting the
total length of the tables. If the user passes -smbios configuration to
QEMU that causes the table size to exceed this limit then various bad
behaviours result, including
- firmware hangs in an infinite loop
- firmware triggers a KVM crash on bad memory access
- firmware silently discards user's SMBIOS data replacing it with
a generic data set.
Limiting the size to 0xffff in QEMU avoids triggering most of these
problems. There is a remaining bug in SeaBIOS which tries to prepend its
own data for table 0, and does not check whether there is sufficient
space before attempting this.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-3-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some applications want to pass quite large values for the OEM strings
entries. Rather than having huge strings on the command line, it would
be better to load them from a file, as supported with -fw_cfg.
This introduces the "path" parameter allowing for:
$ echo -n "thisthing" > mydata.txt
$ qemu-system-x86_64 \
-smbios type=11,value=something \
-smbios type=11,path=mydata.txt \
-smbios type=11,value=somemore \
...other args...
Now in the guest
$ dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x0E00, DMI type 11, 5 bytes
OEM Strings
String 1: something
String 2: thisthing
String 3: somemore
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-2-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
here is diff against tests/data/acpi/q35/DSDT
for currently shipped ovmf binary.
(once firmware blob is updated, it will negotiate CPU hotplug
feature which will ad extra hunk sending SMI and Q35 tests will
need to be updated), but otherwise diff shows new CPU hotplug
AML that is shared between q35 and pc machines.
Method (CSCN, 0, Serialized)
{
Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
- Local0 = One
- While ((Local0 == One))
- {
- Local0 = Zero
- \_SB.PCI0.PRES.CCMD = Zero
- If ((\_SB.PCI0.PRES.CINS == One))
+ Name (CNEW, Package (0xFF){})
+ Local3 = Zero
+ Local4 = One
+ While ((Local4 == One))
+ {
+ Local4 = Zero
+ Local0 = One
+ Local1 = Zero
+ While (((Local0 == One) && (Local3 < One)))
{
- CTFY (\_SB.PCI0.PRES.CDAT, One)
- \_SB.PCI0.PRES.CINS = One
- Local0 = One
+ Local0 = Zero
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CCMD = Zero
+ If ((\_SB.PCI0.PRES.CDAT < Local3))
+ {
+ Break
+ }
+
+ If ((Local1 == 0xFF))
+ {
+ Local4 = One
+ Break
+ }
+
+ Local3 = \_SB.PCI0.PRES.CDAT
+ If ((\_SB.PCI0.PRES.CINS == One))
+ {
+ CNEW [Local1] = Local3
+ Local1++
+ Local0 = One
+ }
+ ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+ {
+ CTFY (Local3, 0x03)
+ \_SB.PCI0.PRES.CRMV = One
+ Local0 = One
+ }
+
+ Local3++
}
- ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+
+ Local2 = Zero
+ While ((Local2 < Local1))
{
- CTFY (\_SB.PCI0.PRES.CDAT, 0x03)
- \_SB.PCI0.PRES.CRMV = One
- Local0 = One
+ Local3 = DerefOf (CNEW [Local2])
+ CTFY (Local3, One)
+ Debug = Local3
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CINS = One
+ Local2++
}
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case firmware has negotiated CPU hotplug SMI feature, generate
AML to describe SMI IO port region and send SMI to firmware
on each CPU hotplug SCI in case new CPUs were hotplugged.
Since new CPUs can be hotplugged while CPU_SCAN_METHOD is running
we can't send SMI before new CPUs are fetched from QEMU as it
could cause sending Notify to a CPU that firmware hasn't seen yet.
So fetch new CPUs into local cache first, then send SMI and
after that send Notify events to cached CPUs. This should ensure
that Notify is sent only to CPUs which were processed by firmware
first.
Any CPUs that were hotplugged after caching will be processed
by the next CPU_SCAN_METHOD, when pending SCI is handled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When CPU hotplug with SMI has been negotiated, describe the SMI
register block in the DSDT. Pass the ACPI name of the SMI control
register to build_cpus_aml(), so that CPU_SCAN_METHOD can access the
register in the next patch.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Translate the "CPU hotplug with SMI" feature bit, from the property
added in the last patch, to a dedicated boolean in AcpiPmInfo.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose the "smi_negotiated_features" field of ICH9LPCState as
a QOM property.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... to let tests pass until binary blobs are updated with new AML
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CPU hot-unplug with SMM requires firmware participation to prevent
guest crash (i.e. CPU can be removed only after OS _and_ firmware
were prepared for the action).
Previous patches introduced ICH9_LPC_SMI_F_CPU_HOT_UNPLUG_BIT
feature bit, which is advertised by firmware when it has support
for CPU hot-unplug. Use it to check if guest is able to handle
unplug and make device_del fail gracefully if hot-unplug feature
hasn't been negotiated.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There were reports of guest crash on CPU hotplug, when using q35 machine
type and OVMF with SMM, due to hotplugged CPU trying to process SMI at
default SMI handler location without it being relocated by firmware first.
Fix it by refusing hotplug if firmware hasn't negotiated CPU hotplug with
SMI support while SMI broadcast is in use.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-3-imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It will allow firmware to notify QEMU that firmware requires SMI
being triggered on CPU hot[un]plug, so that it would be able to account
for hotplugged CPU and relocate it to new SMM base and/or safely remove
CPU on unplug.
Using negotiated features, follow up patches will insert SMI upcall
into AML code, to make sure that firmware processes hotplug before
guest OS would attempt to use new CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current the 'virtio_set_features' only update the 'MemorRegionCaches'
when the 'virtio_set_features_nocheck' return '0' which means it is
not bad features. However the guest can still trigger the access of the
used vring after set bad features. In this situation it will cause assert
failure in 'ADDRESS_SPACE_ST_CACHED'.
Buglink: https://bugs.launchpad.net/qemu/+bug/1890333
Fixes: db812c4073 ("virtio: update MemoryRegionCaches when guest negotiates features")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200919082706.6703-1-liq3ea@163.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
This patch forces virtio version 1 as done for vhost-vsock-pci.
To avoid migration issues, we force virtio version 1 only when
legacy check is enabled in the new machine types (>= 5.1).
Cc: qemu-stable@nongnu.org
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-5-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on vhost-user-vsock-pci device:
$ ./qemu-system-x86_64 ... \
-chardev socket,id=char0,reconnect=0,path=/tmp/vhost4.socket \
-device vhost-user-vsock-pci,chardev=char0
qemu-system-x86_64: -device vhost-user-vsock-pci,chardev=char0:
device is modern-only, use disable-legacy=on
virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
This patch forces virtio version 1 and removes the 'transitional_name'
property, as done for vhost-vsock-pci, removing the need to specify
'disable-legacy=on' on vhost-user-vsock-pci device.
Cc: qemu-stable@nongnu.org
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-4-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on vhost-vsock-pci device:
$ ./qemu-system-x86_64 ... -device vhost-vsock-pci,guest-cid=5
qemu-system-x86_64: -device vhost-vsock-pci,guest-cid=5:
device is modern-only, use disable-legacy=on
virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
In addition Cornelia verified that forcing a legacy mode on
vhost-vsock-pci device using x86-64 host and s390x guest, so with
different endianness, produces strange behaviours.
This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
vhost-vsock-pci device.
To avoid migration issues, we force virtio version 1 only when
legacy check is enabled in the new machine types (>= 5.1).
As the transitional device name is not commonly used, we do not
provide compatibility handling for it.
Cc: qemu-stable@nongnu.org
Reported-by: Qian Cai <caiqian@redhat.com>
Reported-by: Qinghua Cheng <qcheng@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1868449
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-3-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not accidentally
on") added a check that returns an error if legacy support is on, but the
device does not support legacy.
Unfortunately some devices were wrongly declared legacy capable even if
they were not (e.g vhost-vsock).
To avoid migration issues, we add a virtio-device property
(x-disable-legacy-check) to skip the legacy error, printing a warning
instead, for machine types < 5.1.
Cc: qemu-stable@nongnu.org
Fixes: 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on")
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-2-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the same logic as for vhost-net-user and vhost-kernel,
enable vhost-net if vhost-net-vdpa is enabled and vhost-net is not
explicitly disabled.
See 299e6f19b3 ("vhost-net: revamp configure logic")
Autoselect VHOST if VHOST_VDPA is set
See 21c6b0c87e ("configure: simplify vhost condition with Kconfig")
See 2becc36a3e ("meson: infrastructure for building emulators"
Problems can be triggered using;
... --enable-vhost-vdpa --disable-vhost-user --disable-vhost-kernel ...
Fixes: 108a64818e ("vhost-vdpa: introduce vhost-vdpa backend")
Cc: lulu@redhat.com
Cc: pbonzini@redhat.com
Cc: marcandre.lureau@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200924210023.160679-1-lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add trace functions in vhost-vdpa.c.
All traces from this file can be enabled with '-trace vhost_vdpa*'.
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200925091055.186023-3-lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dumping one line of hexadecimal/ASCII from a buffer is often needed.
Move this part from qemu_hexdump() and use it
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200925091055.186023-2-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu fails with below error when trying to run with virtio pmem:
(qemu) qemu-system-x86_64: -device virtio-pmem-pci,memdev=mem1,id=nv1:
device is modern-only, use disable-legacy=on
This patch fixes this by forcing virtio 1 with virtio-pmem.
fixes: adf0748a49 ("virtio-pci: Proxy for virtio-pmem")
Signed-off-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Message-Id: <20200925102251.7216-1-pankaj.gupta.linux@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on virtio-iommu-pci:
qemu-system-aarch64: -device virtio-iommu-pci: device is modern-only,
use disable-legacy=on
virtio-iommu was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
virtio-iommu-pci device.
Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200908193309.20569-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If realize fails, domains and endpoints trees may be NULL. On
unrealize(), this produces assertions:
"GLib: g_tree_destroy: assertion 'tree != NULL' failed"
Check that the trees are non NULL before destroying them.
Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200908193309.20569-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These were deprecated since 4.0, remove both HMP and QMP variants.
Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now only vhost-user-net device is supported by the test. Other
vhost-user devices are not tested. As a first step make source code
refactoring so new devices can reuse the same test routines. To make
this provide a new vhost_user_ops structure with the methods to
initialize device, its command line or make a proper vhost-user
responses.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <a48b60fb96fef230b75fff72a2d77040dcb5ef7c.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vhost-user-blk daemon provides only one virtqueue, but device was
added with several queues, then QEMU will send more VHOST-USER command
than expected by daemon side. The vhost_virtqueue_start() routine
handles such case by checking the return value from the
virtio_queue_get_desc_addr() function call. Add the same check to the
vhost_dev_set_log() routine.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <6232946d5af09e9775076645909964a6539b8ab5.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
