Commit Graph

176 Commits

Author SHA1 Message Date
Paolo Bonzini cc07162953 block: introduce max_hw_iov for use in scsi-generic
Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel
sources, IOV_MAX in POSIX).  Because of this, on some host adapters
requests with many iovecs are rejected with -EINVAL by the
io_submit() or readv()/writev() system calls.

In fact, the same limit applies to SG_IO as well.  To fix both the
EINVAL and the possible performance issues from using fewer iovecs
than allowed by Linux (some HBAs have max_segments as low as 128),
introduce a separate entry in BlockLimits to hold the max_segments
value from sysfs.  This new limit is used only for SG_IO and clamped
to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to
bs->bl.max_transfer.

Reported-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Cc: qemu-stable@nongnu.org
Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to power of 2", 2021-06-25)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923130436.1187591-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-06 10:25:55 +02:00
Vladimir Sementsov-Ogievskiy 0c8022876f block: use int64_t instead of int in driver discard handlers
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, convert driver discard handlers bytes parameter to int64_t.

The only caller of all updated function is bdrv_co_pdiscard in
block/io.c. It is already prepared to work with 64bit requests, but
pass at most max(bs->bl.max_pdiscard, INT_MAX) to the driver.

Let's look at all updated functions:

blkdebug: all calculations are still OK, thanks to
  bdrv_check_qiov_request().
  both rule_check and bdrv_co_pdiscard are 64bit

blklogwrites: pass to blk_loc_writes_co_log which is 64bit

blkreplay, copy-on-read, filter-compress: pass to bdrv_co_pdiscard, OK

copy-before-write: pass to bdrv_co_pdiscard which is 64bit and to
  cbw_do_copy_before_write which is 64bit

file-posix: one handler calls raw_account_discard() is 64bit and both
  handlers calls raw_do_pdiscard(). Update raw_do_pdiscard, which pass
  to RawPosixAIOData::aio_nbytes, which is 64bit (and calls
  raw_account_discard())

gluster: somehow, third argument of glfs_discard_async is size_t.
  Let's set max_pdiscard accordingly.

iscsi: iscsi_allocmap_set_invalid is 64bit,
  !is_byte_request_lun_aligned is 64bit.
  list.num is uint32_t. Let's clarify max_pdiscard and
  pdiscard_alignment.

mirror_top: pass to bdrv_mirror_top_do_write() which is
  64bit

nbd: protocol limitation. max_pdiscard is alredy set strict enough,
  keep it as is for now.

nvme: buf.nlb is uint32_t and we do shift. So, add corresponding limits
  to nvme_refresh_limits().

preallocate: pass to bdrv_co_pdiscard() which is 64bit.

rbd: pass to qemu_rbd_start_co() which is 64bit.

qcow2: calculations are still OK, thanks to bdrv_check_qiov_request(),
  qcow2_cluster_discard() is 64bit.

raw-format: raw_adjust_offset() is 64bit, bdrv_co_pdiscard too.

throttle: pass to bdrv_co_pdiscard() which is 64bit and to
  throttle_group_co_io_limits_intercept() which is 64bit as well.

test-block-iothread: bytes argument is unused

Great! Now all drivers are prepared to handle 64bit discard requests,
or else have explicit max_pdiscard limits.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29 13:46:32 -05:00
Vladimir Sementsov-Ogievskiy f34b2bcf8c block: use int64_t instead of int in driver write_zeroes handlers
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, convert driver write_zeroes handlers bytes parameter to int64_t.

The only caller of all updated function is bdrv_co_do_pwrite_zeroes().

bdrv_co_do_pwrite_zeroes() itself is of course OK with widening of
callee parameter type. Also, bdrv_co_do_pwrite_zeroes()'s
max_write_zeroes is limited to INT_MAX. So, updated functions all are
safe, they will not get "bytes" larger than before.

Still, let's look through all updated functions, and add assertions to
the ones which are actually unprepared to values larger than INT_MAX.
For these drivers also set explicit max_pwrite_zeroes limit.

Let's go:

blkdebug: calculations can't overflow, thanks to
  bdrv_check_qiov_request() in generic layer. rule_check() and
  bdrv_co_pwrite_zeroes() both have 64bit argument.

blklogwrites: pass to blk_log_writes_co_log() with 64bit argument.

blkreplay, copy-on-read, filter-compress: pass to
  bdrv_co_pwrite_zeroes() which is OK

copy-before-write: Calls cbw_do_copy_before_write() and
  bdrv_co_pwrite_zeroes, both have 64bit argument.

file-posix: both handler calls raw_do_pwrite_zeroes, which is updated.
  In raw_do_pwrite_zeroes() calculations are OK due to
  bdrv_check_qiov_request(), bytes go to RawPosixAIOData::aio_nbytes
  which is uint64_t.
  Check also where that uint64_t gets handed:
  handle_aiocb_write_zeroes_block() passes a uint64_t[2] to
  ioctl(BLKZEROOUT), handle_aiocb_write_zeroes() calls do_fallocate()
  which takes off_t (and we compile to always have 64-bit off_t), as
  does handle_aiocb_write_zeroes_unmap. All look safe.

gluster: bytes go to GlusterAIOCB::size which is int64_t and to
  glfs_zerofill_async works with off_t.

iscsi: Aha, here we deal with iscsi_writesame16_task() that has
  uint32_t num_blocks argument and iscsi_writesame16_task() has
  uint16_t argument. Make comments, add assertions and clarify
  max_pwrite_zeroes calculation.
  iscsi_allocmap_() functions already has int64_t argument
  is_byte_request_lun_aligned is simple to update, do it.

mirror_top: pass to bdrv_mirror_top_do_write which has uint64_t
  argument

nbd: Aha, here we have protocol limitation, and NBDRequest::len is
  uint32_t. max_pwrite_zeroes is cleanly set to 32bit value, so we are
  OK for now.

nvme: Again, protocol limitation. And no inherent limit for
  write-zeroes at all. But from code that calculates cdw12 it's obvious
  that we do have limit and alignment. Let's clarify it. Also,
  obviously the code is not prepared to handle bytes=0. Let's handle
  this case too.
  trace events already 64bit

preallocate: pass to handle_write() and bdrv_co_pwrite_zeroes(), both
  64bit.

rbd: pass to qemu_rbd_start_co() which is 64bit.

qcow2: offset + bytes and alignment still works good (thanks to
  bdrv_check_qiov_request()), so tail calculation is OK
  qcow2_subcluster_zeroize() has 64bit argument, should be OK
  trace events updated

qed: qed_co_request wants int nb_sectors. Also in code we have size_t
  used for request length which may be 32bit. So, let's just keep
  INT_MAX as a limit (aligning it down to pwrite_zeroes_alignment) and
  don't care.

raw-format: Is OK. raw_adjust_offset and bdrv_co_pwrite_zeroes are both
  64bit.

throttle: Both throttle_group_co_io_limits_intercept() and
  bdrv_co_pwrite_zeroes() are 64bit.

vmdk: pass to vmdk_pwritev which is 64bit

quorum: pass to quorum_co_pwritev() which is 64bit

Hooray!

At this point all block drivers are prepared to support 64bit
write-zero requests, or have explicitly set max_pwrite_zeroes.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: use <= rather than < in assertions relying on max_pwrite_zeroes]
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29 13:46:32 -05:00
Vladimir Sementsov-Ogievskiy 485350497b block: use int64_t instead of uint64_t in copy_range driver handlers
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, convert driver copy_range handlers parameters which are already
64bit to signed type.

Now let's consider all callers. Simple

  git grep '\->bdrv_co_copy_range'

shows the only caller:

  bdrv_co_copy_range_internal(), which does bdrv_check_request32(),
  so everything is OK.

Still, the functions may be called directly, not only by drv->...
Let's check:

git grep '\.bdrv_co_copy_range_\(from\|to\)\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done

shows no more callers. So, we are done.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29 13:46:32 -05:00
Vladimir Sementsov-Ogievskiy e75abedab7 block: use int64_t instead of uint64_t in driver write handlers
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, convert driver write handlers parameters which are already 64bit to
signed type.

While being here, convert also flags parameter to be BdrvRequestFlags.

Now let's consider all callers. Simple

  git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?'

shows that's there three callers of driver function:

 bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in
 block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to
 be non-negative.

 qcow2_save_vmstate() does bdrv_check_qiov_request().

Still, the functions may be called directly, not only by drv->...
Let's check:

git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done

shows several callers:

qcow2:
  qcow2_co_truncate() write at most up to @offset, which is checked in
    generic qcow2_co_truncate() by bdrv_check_request().
  qcow2_co_pwritev_compressed_task() pass the request (or part of the
    request) that already went through normal write path, so it should
    be OK

qcow:
  qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch

quorum:
  quorum_co_pwrite_zeroes() pass int64_t and int - OK

throttle:
  throttle_co_pwritev_compressed() pass int64_t, it's updated by this
  patch

vmdk:
  vmdk_co_pwritev_compressed() pass int64_t, it's updated by this
  patch

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29 13:46:31 -05:00
Vladimir Sementsov-Ogievskiy f7ef38dd13 block: use int64_t instead of uint64_t in driver read handlers
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, convert driver read handlers parameters which are already 64bit to
signed type.

While being here, convert also flags parameter to be BdrvRequestFlags.

Now let's consider all callers. Simple

  git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?'

shows that's there three callers of driver function:

 bdrv_driver_preadv() in block/io.c, passes int64_t, checked by
   bdrv_check_qiov_request() to be non-negative.

 qcow2_load_vmstate() does bdrv_check_qiov_request().

 do_perform_cow_read() has uint64_t argument. And a lot of things in
 qcow2 driver are uint64_t, so converting it is big job. But we must
 not work with requests that don't satisfy bdrv_check_qiov_request(),
 so let's just assert it here.

Still, the functions may be called directly, not only by drv->...
Let's check:

git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done

The only one such caller:

    QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1);
    ...
    ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0);

in tests/unit/test-bdrv-drain.c, and it's OK obviously.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix typos]
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29 13:46:31 -05:00
Peter Maydell d1fe59377b Trivial patches pull request 20210916
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmFDUCMSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748Oi0P/0Osr0C7A/movW2TCCIXtA/a3vjEtE6s
 FpWlmLtjTT6bODu8GjAq2QszByb0K5aKap55y1FEn3cejueXdbrZLCMBKh7Rgjr8
 iu8tkJMBR0WtC8vIMoSDNbmGmOl8gXAsWwtAB24nRjXODT8SePShqsXbGFK0BsbL
 88duxEqwVMtQnHESa0v3gPt+vYNrZC3p2zBN3pxR7RTGEQKa3kMAHTqu5dm/OtAB
 dhNVT79HMagP1Nm+NqPqMbPW5Jwh9DPNWJ4Pf4cKvHKxyE9fnwvUNiNqiBTah/oK
 B/LPLfru6f5ndKYvpGddex+0ToAqfd/J/W2m6qo5fp8c4XyTn77prNJauM7ij+tu
 72hCATsFVuaSJo1hgs70boo00rLd4JifumQRPahekAQBudHSy28K76oC7Km42cyG
 S01zkJ7cVo9fBj0csj95P5tegGznmXsklk0bQf78lwJAcf4TnAL9bh4cRNi/0Xle
 sRQsBB5DGJbn32t+Oo3g+AHP448uHQPBT/CuwN4S3C+fguAaY3wBAd9GLwJSZeFW
 lg8UejcZQ6b4fY+W3Q7fr4tIRqALbqFhAltQqnOqXZuNGNtup6E/SZEZZCjtIRyz
 +RsNBTrb8MvbaHGwzXYfLWUUPUGrD/Tea+CpKX5IpVXIlAgNzKejY/urmq4kWA72
 NYLVtXDNRw3A
 =z2sk
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.2-pull-request' into staging

Trivial patches pull request 20210916

# gpg: Signature made Thu 16 Sep 2021 15:09:39 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-6.2-pull-request:
  target/sparc: Make sparc_cpu_dump_state() static
  target/avr: Fix compiler errors (-Werror=enum-conversion)
  hw/vfio: Fix typo in comments
  intel_iommu: Fix typo in comments
  target/i386: spelling: occured=>occurred, mininum=>minimum
  configure: add missing pc-bios/qemu_vga.ndrv symlink in build tree
  spelling: sytem => system
  qdev: Complete qdev_init_gpio_out() documentation
  hw/i386/acpi-build: Fix a typo
  util: Remove redundant checks in the openpty()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-16 16:02:31 +01:00
Hanna Reitz 869e7ee827 block/file-posix: Do not force-cap *pnum
bdrv_co_block_status() does it for us, we do not need to do it here.

The advantage of not capping *pnum is that bdrv_co_block_status() can
cache larger data regions than requested by its caller.

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210812084148.14458-5-hreitz@redhat.com>
2021-09-15 15:54:07 +02:00
Michael Tokarev 68857f13aa spelling: sytem => system
Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <fefb5f5c-82bc-05e2-b4c1-665e9d6896ff@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-15 15:51:07 +02:00
Akihiko Odaki 0dfc7af2b2 block/file-posix: Optimize for macOS
This commit introduces "punch hole" operation and optimizes transfer
block size for macOS.

Thanks to Konstantin Nazarov for detailed analysis of a flaw in an
old version of this change:
https://gist.github.com/akihikodaki/87df4149e7ca87f18dc56807ec5a1bc5#gistcomment-3654667

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20210705130458.97642-1-akihiko.odaki@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-07-06 14:28:55 +01:00
Paolo Bonzini bd80936a4f file-posix: handle EINTR during ioctl
Similar to other handle_aiocb_* functions, handle_aiocb_ioctl needs to cater
for the possibility that ioctl is interrupted by a signal.  Otherwise, the
I/O is incorrectly reported as a failure to the guest.

Reported-by: Gordon Watson <gwatson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-25 10:54:13 +02:00
Joelle van Dyne 09e20abdda block: detect DKIOCGETBLOCKCOUNT/SIZE before use
iOS hosts do not have these defined so we fallback to the
default behaviour.

Co-authored-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-25 10:54:13 +02:00
Paolo Bonzini 267cd53f5f block: try BSD disk size ioctls one after another
Try all the possible ioctls for disk size as long as they are
supported, to keep the #if ladder simple.

Extracted and cleaned up from a patch by Joelle van Dyne and
Warner Losh.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-25 10:54:13 +02:00
Joelle van Dyne 14176c8d05 block: feature detection for host block support
On Darwin (iOS), there are no system level APIs for directly accessing
host block devices. We detect this at configure time.

Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20210315180341.31638-2-j@getutm.app>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-25 10:54:13 +02:00
Paolo Bonzini 18473467d5 file-posix: try BLKSECTGET on block devices too, do not round to power of 2
bs->sg is only true for character devices, but block devices can also
be used with scsi-block and scsi-generic.  Unfortunately BLKSECTGET
returns bytes in an int for /dev/sgN devices, and sectors in a short
for block devices, so account for that in the code.

The maximum transfer also need not be a power of 2 (for example I have
seen disks with 1280 KiB maximum transfer) so there's no need to pass
the result through pow2floor.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-25 10:54:13 +02:00
Paolo Bonzini 24b36e9813 block: add max_hw_transfer to BlockLimits
For block host devices, I/O can happen through either the kernel file
descriptor I/O system calls (preadv/pwritev, io_submit, io_uring)
or the SCSI passthrough ioctl SG_IO.

In the latter case, the size of each transfer can be limited by the
HBA, while for file descriptor I/O the kernel is able to split and
merge I/O in smaller pieces as needed.  Applying the HBA limits to
file descriptor I/O results in more system calls and suboptimal
performance, so this patch splits the max_transfer limit in two:
max_transfer remains valid and is used in general, while max_hw_transfer
is limited to the maximum hardware size.  max_hw_transfer can then be
included by the scsi-generic driver in the block limits page, to ensure
that the stricter hardware limit is used.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-25 10:54:13 +02:00
Paolo Bonzini 01ef8185b8 scsi-generic: pass max_segments via max_iov field in BlockLimits
I/O to a disk via read/write is not limited by the number of segments allowed
by the host adapter; the kernel can split requests if needed, and the limit
imposed by the host adapter can be very low (256k or so) to avoid that SG_IO
returns EINVAL if memory is heavily fragmented.

Since this value is only interesting for SG_IO-based I/O, do not include
it in the max_transfer and only take it into account when patching the
block limits VPD page in the scsi-generic device.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2021-06-25 10:54:12 +02:00
Paolo Bonzini 8ad5ab6148 file-posix: fix max_iov for /dev/sg devices
Even though it was only called for devices that have bs->sg set (which
must be character devices), sg_get_max_segments looked at /sys/dev/block
which only works for block devices.

On Linux the sg driver has its own way to provide the maximum number of
iovecs in a scatter/gather list, so add support for it.  The block device
path is kept because it will be reinstated in the next patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2021-06-25 10:54:12 +02:00
Daniel P. Berrangé 99be1ac366 block: remove duplicate trace.h include
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-06-14 13:28:50 +01:00
Daniel P. Berrangé 60ff2ae2a2 block: add trace point when fdatasync fails
A flush failure is a critical failure scenario for some operations.
For example, it will prevent migration from completing, as it will
make vm_stop() report an error. Thus it is important to have a
trace point present for debugging.

Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-06-14 13:28:50 +01:00
Daniel P. Berrangé c7ddc8821d block: preserve errno from fdatasync failures
When fdatasync() fails on a file backend we set a flag that
short-circuits any future attempts to call fdatasync(). The
first failure returns the true errno, but the later short-
circuited calls return a generic EIO. The latter is unhelpful
because fdatasync() can return a variety of errnos, including
EACCESS.

Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-06-14 13:28:50 +01:00
Thomas Huth fa95e9fbab block/file-posix: Try other fallbacks after invalid FALLOC_FL_ZERO_RANGE
If fallocate(... FALLOC_FL_ZERO_RANGE ...) returns EINVAL, it's likely
an indication that the file system is buggy and does not implement
unaligned accesses right. We still might be lucky with the other
fallback fallocate() calls later in this function, though, so we should
not return immediately and try the others first.
Since FALLOC_FL_ZERO_RANGE could also return EINVAL if the file descriptor
is not a regular file, we ignore this filesystem bug silently, without
printing an error message for the user.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210527172020.847617-3-thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-02 14:23:20 +02:00
Thomas Huth 73ebf29729 block/file-posix: Fix problem with fallocate(PUNCH_HOLE) on GPFS
A customer reported that running

 qemu-img convert -t none -O qcow2 -f qcow2 input.qcow2 output.qcow2

fails for them with the following error message when the images are
stored on a GPFS file system :

 qemu-img: error while writing sector 0: Invalid argument

After analyzing the strace output, it seems like the problem is in
handle_aiocb_write_zeroes(): The call to fallocate(FALLOC_FL_PUNCH_HOLE)
returns EINVAL, which can apparently happen if the file system has
a different idea of the granularity of the operation. It's arguably
a bug in GPFS, since the PUNCH_HOLE mode should not result in EINVAL
according to the man-page of fallocate(), but the file system is out
there in production and so we have to deal with it. In commit 294682cc3a
("block: workaround for unaligned byte range in fallocate()") we also
already applied the a work-around for the same problem to the earlier
fallocate(FALLOC_FL_ZERO_RANGE) call, so do it now similar with the
PUNCH_HOLE call. But instead of silently catching and returning
-ENOTSUP (which causes the caller to fall back to writing zeroes),
let's rather inform the user once about the buggy file system and
try the other fallback instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210527172020.847617-2-thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-02 14:23:20 +02:00
Vladimir Sementsov-Ogievskiy 72373e40fb block: bdrv_reopen_multiple: refresh permissions on updated graph
Move bdrv_reopen_multiple to new paradigm of permission update:
first update graph relations, then do refresh the permissions.

We have to modify reopen process in file-posix driver: with new scheme
we don't have prepared permissions in raw_reopen_prepare(), so we
should reconfigure fd in raw_check_perm(). Still this seems more native
and simple anyway.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-31-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30 12:27:48 +02:00
Daniel P. Berrangé 8d17adf34f block: remove support for using "file" driver with block/char devices
The 'host_device' and 'host_cdrom' drivers must be used instead.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00
Vladimir Sementsov-Ogievskiy 69b55e03f7 block: refactor bdrv_check_request: add errp
It's better to pass &error_abort than just assert that result is 0: on
crash, we'll immediately see the reason in the backtrace.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix iotest 206 fallout]
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:00:33 -06:00
David Edmondson 797e3e3805 block: report errno when flock fcntl fails
When a call to fcntl(2) for the purpose of adding file locks fails
with an error other than EAGAIN or EACCES, report the error returned
by fcntl.

EAGAIN or EACCES are elided as they are considered to be common
failures, indicating that a conflicting lock is held by another
process.

No errors are elided when removing file locks.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210113164447.2545785-1-david.edmondson@oracle.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2021-01-26 14:36:37 +01:00
Vladimir Sementsov-Ogievskiy 8ac5aab255 block: bdrv_mark_request_serialising: split non-waiting function
We'll need a separate function, which will only "mark" request
serialising with specified align but not wait for conflicting
requests. So, it will be like old bdrv_mark_request_serialising(),
before merging bdrv_wait_serialising_requests_locked() into it.

To reduce the possible mess, let's do the following:

Public function that does both marking and waiting will be called
bdrv_make_request_serialising, and private function which will only
"mark" will be called tracked_request_set_serialising().

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201021145859.11201-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-12-18 12:35:55 +01:00
Pan Nengyuan cb8d0851f1 block/file-posix: fix a possible undefined behavior
local_err is not initialized to NULL, it will cause a assert error as below:
qemu/util/error.c:59: error_setv: Assertion `*errp == NULL' failed.

Fixes: c644751069
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20201023061218.2080844-8-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-13 23:56:16 +01:00
Vladimir Sementsov-Ogievskiy 8b1170012b block: introduce BDRV_MAX_LENGTH
We are going to modify block layer to work with 64bit requests. And
first step is moving to int64_t type for both offset and bytes
arguments in all block request related functions.

It's mostly safe (when widening signed or unsigned int to int64_t), but
switching from uint64_t is questionable.

So, let's first establish the set of requests we want to work with.
First signed int64_t should be enough, as off_t is signed anyway. Then,
obviously offset + bytes should not overflow.

And most interesting: (offset + bytes) being aligned up should not
overflow as well. Aligned to what alignment? First thing that comes in
mind is bs->bl.request_alignment, as we align up request to this
alignment. But there is another thing: look at
bdrv_mark_request_serialising(). It aligns request up to some given
alignment. And this parameter may be bdrv_get_cluster_size(), which is
often a lot greater than bs->bl.request_alignment.
Note also, that bdrv_mark_request_serialising() uses signed int64_t for
calculations. So, actually, we already depend on some restrictions.

Happily, bdrv_get_cluster_size() returns int and
bs->bl.request_alignment has 32bit unsigned type, but defined to be a
power of 2 less than INT_MAX. So, we may establish, that INT_MAX is
absolute maximum for any kind of alignment that may occur with the
request.

Note, that bdrv_get_cluster_size() is not documented to return power
of 2, still bdrv_mark_request_serialising() behaves like it is.
Also, backup uses bdi.cluster_size and is not prepared to it not being
power of 2.
So, let's establish that Qemu supports only power-of-2 clusters and
alignments.

So, alignment can't be greater than 2^30.

Finally to be safe with calculations, to not calculate different
maximums for different nodes (depending on cluster size and
request_alignment), let's simply set QEMU_ALIGN_DOWN(INT64_MAX, 2^30)
as absolute maximum bytes length for Qemu. Actually, it's not much less
than INT64_MAX.

OK, then, let's apply it to block/io.

Let's consider all block/io entry points of offset/bytes:

4 bytes/offset interface functions: bdrv_co_preadv_part(),
bdrv_co_pwritev_part(), bdrv_co_copy_range_internal() and
bdrv_co_pdiscard() and we check them all with bdrv_check_request().

We also have one entry point with only offset: bdrv_co_truncate().
Check the offset.

And one public structure: BdrvTrackedRequest. Happily, it has only
three external users:

 file-posix.c: adopted by this patch
 write-threshold.c: only read fields
 test-write-threshold.c: sets obviously small constant values

Better is to make the structure private and add corresponding
interfaces.. Still it's not obvious what kind of interface is needed
for file-posix.c. Let's keep it public but add corresponding
assertions.

After this patch we'll convert functions in block/io.c to int64_t bytes
and offset parameters. We can assume that offset/bytes pair always
satisfy new restrictions, and make
corresponding assertions where needed. If we reach some offset/bytes
point in block/io.c missing bdrv_check_request() it is considered a
bug. As well, if block/io.c modifies a offset/bytes request, expanding
it more then aligning up to request_alignment, it's a bug too.

For all io requests except for discard we keep for now old restriction
of 32bit request length.

iotest 206 output error message changed, as now test disk size is
larger than new limit. Add one more test case with new maximum disk
size to cover too-big-L1 case.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11 17:52:40 +01:00
Vladimir Sementsov-Ogievskiy 9b100af30f block/file-posix: fix workaround in raw_do_pwrite_zeroes()
We should not set overlap_bytes:

1. Don't worry: it is calculated by bdrv_mark_request_serialising() and
   will be equal to or greater than bytes anyway.

2. If the request was already aligned up to some greater alignment,
   than we may break things: we reduce overlap_bytes, and further
   bdrv_mark_request_serialising() may not help, as it will not restore
   old bigger alignment.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11 17:52:40 +01:00
Li Feng eb43ea16dc file-posix: check the use_lock before setting the file lock
The scenario is that when accessing a volume on an NFS filesystem
without supporting the file lock,  Qemu will complain "Failed to lock
byte 100", even when setting the file.locking = off.

We should do file lock related operations only when the file.locking is
enabled, otherwise, the syscall of 'fcntl' will return non-zero.

Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <1607341446-85506-1-git-send-email-fengli@smartx.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11 17:52:40 +01:00
Maxim Levitsky ece4fa9152 file-posix: allow -EBUSY errors during write zeros on raw block devices
On Linux, fallocate(fd, FALLOC_FL_PUNCH_HOLE) when it is used on a block device,
without O_DIRECT can return -EBUSY if it races with another write to the same page.

Since this is rare and discard is not a critical operation, ignore this error

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201111153913.41840-2-mlevitsk@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-11-17 12:26:48 +01:00
Daniel P. Berrangé b18a24a9f8 block/file: switch to use qemu_open/qemu_create for improved errors
Currently at startup if using cache=none on a filesystem lacking
O_DIRECT such as tmpfs, at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: file system may not support O_DIRECT
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Could not open '/tmp/foo.img': Invalid argument

while at QMP level the hint is missing, so QEMU reports just

  "error": {
      "class": "GenericError",
      "desc": "Could not open '/tmp/foo.img': Invalid argument"
  }

which is close to useless for the end user trying to figure out what
they did wrong.

With this change at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Unable to open '/tmp/foo.img': filesystem does not support O_DIRECT

while at the QMP level QEMU reports a massively more informative

  "error": {
     "class": "GenericError",
     "desc": "Unable to open '/tmp/foo.img': filesystem does not support O_DIRECT"
  }

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-16 10:33:48 +01:00
Daniel P. Berrangé 448058aa99 util: rename qemu_open() to qemu_open_old()
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-16 10:33:48 +01:00
Antoine Damhet bae127d4dc file-posix: Handle `EINVAL` fallocate return value
The `detect-zeroes=unmap` option may issue unaligned
`FALLOC_FL_PUNCH_HOLE` requests, raw block devices can (and will) return
`EINVAL`, qemu should then write the zeroes to the blockdev instead of
issuing an `IO_ERROR`.

The problem can be reprodced like this:

$ qemu-io -c 'write -P 0 42 1234' --image-opts driver=host_device,filename=/dev/loop0,detect-zeroes=unmap
write failed: Invalid argument

Signed-off-by: Antoine Damhet <antoine.damhet@blade-group.com>
Message-Id: <20200717135603.51180-1-antoine.damhet@blade-group.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-21 16:28:57 +02:00
Kevin Wolf a8c5cf27c9 file-posix: Fix leaked fd in raw_open_common() error path
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-4-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-17 14:20:57 +02:00
Kevin Wolf bca5283bd4 file-posix: Fix check_hdev_writable() with auto-read-only
For Linux block devices, being able to open the device read-write
doesn't necessarily mean that the device is actually writable (one
example is a read-only LV, as you get with lvchange -pr <device>). We
have check_hdev_writable() to check this condition and fail opening the
image read-write if it's not actually writable.

However, this check doesn't take auto-read-only into account, but
results in a hard failure instead of downgrading to read-only where
possible.

Fix this and do the writable check not based on BDRV_O_RDWR, but only
when this actually results in opening the file read-write. A second
check is inserted in raw_reconfigure_getfd() to have the same check when
dynamic auto-read-only upgrades an image file from read-only to
read-write.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-17 14:20:57 +02:00
Kevin Wolf 20eaf1bf6e file-posix: Move check_hdev_writable() up
We'll need to call it in raw_open_common(), so move the function to
avoid a forward declaration.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-2-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-17 14:20:57 +02:00
Kevin Wolf 5edc85571e file-posix: Allow byte-aligned O_DIRECT with NFS
Since commit a6b257a08e ('file-posix: Handle undetectable alignment'),
we assume that if we open a file with O_DIRECT and alignment probing
returns 1, we just couldn't find out the real alignment requirement
because some filesystems make the requirement only for allocated blocks.
In this case, a safe default of 4k is used.

This is too strict for NFS, which does actually allow byte-aligned
requests even with O_DIRECT. Because we can't distinguish both cases
with generic code, let's just look at the file system magic and disable
s->needs_alignment for NFS. This way, O_DIRECT can still be used on NFS
for images that are not aligned to 4k.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200716142601.111237-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-17 14:20:57 +02:00
Kevin Wolf ffa244c84a file-posix: Mitigate file fragmentation with extent size hints
Especially when O_DIRECT is used with image files so that the page cache
indirection can't cause a merge of allocating requests, the file will
fragment on the file system layer, with a potentially very small
fragment size (this depends on the requests the guest sent).

On Linux, fragmentation can be reduced by setting an extent size hint
when creating the file (at least on XFS, it can't be set any more after
the first extent has been allocated), basically giving raw files a
"cluster size" for allocation.

This adds a create option to set the extent size hint, and changes the
default from not setting a hint to setting it to 1 MB. The main reason
why qcow2 defaults to smaller cluster sizes is that COW becomes more
expensive, which is not an issue with raw files, so we can choose a
larger size. The tradeoff here is only potentially wasted disk space.

For qcow2 (or other image formats) over file-posix, the advantage should
even be greater because they grow sequentially without leaving holes, so
there won't be wasted space. Setting even larger extent size hints for
such images may make sense. This can be done with the new option, but
let's keep the default conservative for now.

The effect is very visible with a test that intentionally creates a
badly fragmented file with qemu-img bench (the time difference while
creating the file is already remarkable) and then looks at the number of
extents and the time a simple "qemu-img map" takes.

Without an extent size hint:

    $ ./qemu-img create -f raw -o extent_size_hint=0 ~/tmp/test.raw 10G
    Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=0
    $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
    Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
    Run completed in 25.848 seconds.
    $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
    Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
    Run completed in 19.616 seconds.
    $ filefrag ~/tmp/test.raw
    /home/kwolf/tmp/test.raw: 2000000 extents found
    $ time ./qemu-img map ~/tmp/test.raw
    Offset          Length          Mapped to       File
    0               0x1e8480000     0               /home/kwolf/tmp/test.raw

    real    0m1,279s
    user    0m0,043s
    sys     0m1,226s

With the new default extent size hint of 1 MB:

    $ ./qemu-img create -f raw -o extent_size_hint=1M ~/tmp/test.raw 10G
    Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=1048576
    $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
    Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
    Run completed in 11.833 seconds.
    $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
    Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
    Run completed in 10.155 seconds.
    $ filefrag ~/tmp/test.raw
    /home/kwolf/tmp/test.raw: 178 extents found
    $ time ./qemu-img map ~/tmp/test.raw
    Offset          Length          Mapped to       File
    0               0x1e8480000     0               /home/kwolf/tmp/test.raw

    real    0m0,061s
    user    0m0,040s
    sys     0m0,014s

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200707142329.48303-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-14 15:18:59 +02:00
Markus Armbruster af175e85f9 error: Eliminate error_propagate() with Coccinelle, part 2
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away.  The previous commit did that with a Coccinelle script I
consider fairly trustworthy.  This commit uses the same script with
the matching of return taken out, i.e. we convert

    if (!foo(..., &err)) {
        ...
        error_propagate(errp, err);
        ...
    }

to

    if (!foo(..., errp)) {
        ...
        ...
    }

This is unsound: @err could still be read between afterwards.  I don't
know how to express "no read of @err without an intervening write" in
Coccinelle.  Instead, I manually double-checked for uses of @err.

Suboptimal line breaks tweaked manually.  qdev_realize() simplified
further to placate scripts/checkpatch.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-36-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster 668f62ec62 error: Eliminate error_propagate() with Coccinelle, part 1
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away.  Convert

    if (!foo(..., &err)) {
        ...
        error_propagate(errp, err);
        ...
        return ...
    }

to

    if (!foo(..., errp)) {
        ...
        ...
        return ...
    }

where nothing else needs @err.  Coccinelle script:

    @rule1 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
         if (
    (
    -        fun(args, &err, args2)
    +        fun(args, errp, args2)
    |
    -        !fun(args, &err, args2)
    +        !fun(args, errp, args2)
    |
    -        fun(args, &err, args2) op c1
    +        fun(args, errp, args2) op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    )
         }

    @rule2 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    expression var;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
    -    var = fun(args, &err, args2);
    +    var = fun(args, errp, args2);
         ... when != err
         if (
    (
             var
    |
             !var
    |
             var op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    |
             return var;
    )
         }

    @depends on rule1 || rule2@
    identifier err;
    @@
    -    Error *err = NULL;
         ... when != err

Not exactly elegant, I'm afraid.

The "when != lbl:" is necessary to avoid transforming

         if (fun(args, &err)) {
             goto out
         }
         ...
     out:
         error_propagate(errp, err);

even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().

Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly.  I don't know what exactly "when strict" does, only that
it helps here.

The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err".  For
an example where it's too narrow, see vfio_intx_enable().

Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there.  Converted manually.

Line breaks tidied up manually.  One nested declaration of @local_err
deleted manually.  Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster 235e59cf03 qemu-option: Use returned bool to check for failure
The previous commit enables conversion of

    foo(..., &err);
    if (err) {
        ...
    }

to

    if (!foo(..., &err)) {
        ...
    }

for QemuOpts functions that now return true / false on success /
error.  Coccinelle script:

    @@
    identifier fun = {
        opts_do_parse, parse_option_bool, parse_option_number,
        parse_option_size, qemu_opt_parse, qemu_opt_rename, qemu_opt_set,
        qemu_opt_set_bool, qemu_opt_set_number, qemu_opts_absorb_qdict,
        qemu_opts_do_parse, qemu_opts_from_qdict_entry, qemu_opts_set,
        qemu_opts_validate
    };
    expression list args, args2;
    typedef Error;
    Error *err;
    @@
    -    fun(args, &err, args2);
    -    if (err)
    +    if (!fun(args, &err, args2))
         {
             ...
         }

A few line breaks tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-15-armbru@redhat.com>
[Conflict with commit 0b6786a9c1 "block/amend: refactor qcow2 amend
options" resolved by rerunning Coccinelle on master's version]
2020-07-10 15:17:35 +02:00
Vladimir Sementsov-Ogievskiy ac9185603e block/file-posix: drop unallocated_blocks_are_zero
raw_co_block_status() in block/file-posix.c never returns 0, so
unallocated_blocks_are_zero is useless (it doesn't affect the only user
of the field: bdrv_co_block_status()). Drop it.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-8-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-07-06 10:34:14 +02:00
Eric Blake 47e0b38a13 block: Drop unused .bdrv_has_zero_init_truncate
Now that there are no clients of bdrv_has_zero_init_truncate, none of
the drivers need to worry about providing it.

What's more, this eliminates a source of some confusion: a literal
reading of the documentation as written in ceaca56f and implemented in
commit 1dcaf527 claims that a driver which returns 0 for
bdrv_has_zero_init_truncate() must not return 1 for
bdrv_has_zero_init(); this condition was violated for parallels, qcow,
and sometimes for vdi, although in practice it did not matter since
those drivers also lacked .bdrv_co_truncate.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-10-eblake@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-08 13:26:35 +02:00
Simran Singhal b3ac2b94cd Compress lines for immediate return
Compress two lines into a single line if immediate return statement is found.

It also remove variables progress, val, data, ret and sock
as they are no longer needed.

Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('

Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@

-ret =
+return
     e;
-return ret;

Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-04 14:43:22 +02:00
Kevin Wolf 2f0c6e7a65 file-posix: Support BDRV_REQ_ZERO_WRITE for truncate
For regular files, we always get BDRV_REQ_ZERO_WRITE behaviour from the
OS, so we can advertise the flag and just ignore it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-7-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-04-30 17:51:07 +02:00
Kevin Wolf 92b92799dc block: Add flags to BlockDriver.bdrv_co_truncate()
This adds a new BdrvRequestFlags parameter to the .bdrv_co_truncate()
driver callbacks, and a supported_truncate_flags field in
BlockDriverState that allows drivers to advertise support for request
flags in the context of truncate.

For now, we always pass 0 and no drivers declare support for any flag.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-04-30 17:51:07 +02:00
Markus Armbruster 77ed971b9d block/file-posix: Fix check_cache_dropped() error handling
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

check_cache_dropped() calls error_setg() in a loop.  It fails to break
the loop in one instance.  If a subsequent iteration error_setg()s
again, it trips error_setv()'s assertion.

Fix it to break the loop.

Fixes: 31be8a2a97
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200422130719.28225-3-armbru@redhat.com>
2020-04-29 08:01:52 +02:00