Add the vexpress-a15 machine, and the A-Series memory map it uses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
The arm_boot secondary boot loader code needs the address of
the GIC CPU interface. Obtaining this from the base address
of the private peripheral region was possible for A9 and 11MPcore,
but the A15 puts the GIC CPU interface in a different place.
So make boards pass in the GIC CPU interface address directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instantiate the CLCD on the vexpress motherboard as well as one on
the daughterboard -- the A15 daughterboard does not have a CLCD
and so relies on the motherboard one.
At the moment QEMU doesn't provide infrastructure for selecting
which display device gets to actually show graphics -- the first
one registered is it. Fortunately this works for the major use
case (Linux): if the daughterboard has a CLCD it will come first
and be used, otherwise we fall back to the motherboard CLCD.
So we don't (currently) need to implement the control register
which allows software to tell the mux which video output to pass
through to the outside world.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Factor out daughterboard specifics into a data structure and
daughterboard initialization function, in preparation for adding
vexpress-a15 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On real Versatile Express hardware, the boot ROM puts the secondary
CPU bootcode/holding pen in SRAM. We can therefore rely on Linux not
trashing this memory until secondary CPUs have booted up, and can
put our QEMU-specific pen code in the same place. This allows us to
drop the odd "hack" RAM page we were using before.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pull the addresses used for mapping motherboard peripherals into
memory out into a table. This will allow us to simply provide a
second table to implement the "Cortex-A Series" memory map used by
the A15 variant of Versatile Express, as well as the current
"Legacy" map used by A9.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Add a model of the Cortex-A15 memory mapped private peripheral
space. This is fairly simple because the only memory mapped
bit of the A15 is the GIC.
Note that we don't currently model a VGIC and therefore don't
map the VGIC related bits of the GIC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Exynos4210 display controller (FIMD) has 5 hardware windows with alpha and
chroma key blending functions.
Signed-off-by: Mitsyanko Igor <i.mitsyanko@samsung.com>
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SMDKC210 uses lan9215 chip, but lan9118 in 16-bit mode seems to
be enough.
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Patch adds basic model for Exynos4210 SoC PMU.
This model implements PMU registers just as a bulk of memory. Currently,
the only reason this device exists is that secondary CPU boot loader
uses PMU INFORM5 register as a holding pen.
Signed-off-by: Maksim Kozlov <m.kozlov@samsung.com>
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add basic support of exynos4210 UART
Signed-off-by: Maksim Kozlov <m.kozlov@samsung.com>
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add initial support of NURI and SMDKC210 boards
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the "machine" option list use list merging, so that multiple
-machine arguments (and the -enable-kvm argument) all merge together
into a single list. Drop the calls to qemu_opts_reset() which meant
that only the last -machine or -enable-kvm option had any effect.
This fixes the bug where "-enable-kvm -machine foo" would ignore
the '-enable-kvm' option, and "-machine foo -enable-kvm" would
ignore the '-machine foo' option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Add support for option lists which are merged together, so that
"-listname foo=bar -listname bar=baz" is equivalent to "-listname
foo=bar,bar=baz" rather than generating two separate lists of options.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Since target-arm has some CPUState fields for which we take the approach
of baking assumptions about them into translated code and then calling
tb_flush() when the fields change, we must also tb_flush on CPU reset,
because reset is a change of those fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
The parameters initrd_size and base are already included
in the info parameter, so there is no need to pass them
separately.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>,
The correct FPSID for the Cortex-A9 (according to the TRM) is
0x41033090 for the r0p0 that we claim to model.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
I noticed some unused code in the twl92230, probably from before
qdev-ification. This patch makes the machine use the chip's pwrbtn
signal.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
* kraxel/usb.38: (28 commits)
xhci: handle USB_RET_NAK
xhci: remote wakeup support
xhci: kill port arg from xhci_setup_packet
xhci: stop on errors
xhci: add trb type name lookup support.
xhci: signal low- and fullspeed support
usb: add USBBusOps->wakeup_endpoint
usb: pass USBEndpoint to usb_wakeup
usb: maintain async packet list per endpoint
usb: Set USBEndpoint in usb_packet_setup().
usb: add USBEndpoint->{nr,pid}
usb: USBPacket: add status, rename owner -> ep
usb: fold usb_generic_handle_packet into usb_handle_packet
usb: kill handle_packet callback
usb-xhci: switch to usb_find_device()
usb-musb: switch to usb_find_device()
usb-ohci: switch to usb_find_device()
usb-ehci: switch to usb_find_device()
usb-uhci: switch to usb_find_device()
usb: handle dev == NULL in usb_handle_packet()
...
* kwolf/for-anthony:
AHCI: Masking of IRQs actually masks them
sheepdog: fix co_recv coroutine context
AHCI: Fix port reset race
rewrite QEMU_BUILD_BUG_ON
qcow2: Keep unknown header extension when rewriting header
qcow2: Update whole header at once
vpc: Round up image size during fixed image creation
vpc: Add support for Fixed Disk type
iSCSI: add configuration variables for iSCSI
qemu-io: add write -z option for bdrv_co_write_zeroes
qed: add .bdrv_co_write_zeroes() support
qed: replace is_write with flags field
block: perform zero-detection during copy-on-read
block: add .bdrv_co_write_zeroes() interface
cutils: extract buffer_is_zero() from qemu-img.c
Otherwise we end up with a dangling reference which causes qdev_free() to fail.
Reported-by: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev_prop_set_* functions are always called by machine init functions
that should know what they're doing, so they abort on error. Still,
an assert(!errp) does not aid debugging. Print an error before aborting.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
SPARC and PPC set properties to NULL. This can be done with an
empty string value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix this error:
/src/qemu/target-ppc/helper.c: In function 'booke206_tlb_to_page_size':
/src/qemu/target-ppc/helper.c:1296:14: error: variable 'tlbncfg' set but not used [-Werror=unused-but-set-variable]
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The conversion to memory regions broke lazy ROMD switching by forgetting
to update the rom_mode state variable.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Helpful to understand guest configurations of things like the i440FX's
PAM or the state of ROM devices.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This fixes the regression introduced by cd7a45c95e: We lost the or'ing
with the full_update flag.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a field to XHCITransfer to correctly keep track of NAK'ed usb
packets. Retry transfers when the endpoint is kicked again. Implement
wakeup_endpoint bus op so we can kick the endpoint when needed.
With this patch applied the emulated hid devices are working correctly
when hooked up to xhci. usb-tabled without polling, yay!
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add usb bus op which is called whenever a usb endpoint becomes ready,
so the host adapter emulation can react on that event.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Devices must specify which endpoint has data to transfer now.
The plan is to use the usb_wakeup() not only for remove wakeup support,
but for "data ready" signaling in general, so we can move away from
constant polling to event driven usb device emulation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Maintain a list of async packets per endpoint. With the current code
the list will never receive more than a single item. I think you can
guess what the future plan is though ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix format type mismatches in do_brk debug printfs.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
