Commit Graph

7 Commits

Author SHA1 Message Date
Yongbok Kim
103be64c26 target/mips: Add CP0 PWCtl register
Add PWCtl register (CP0 Register 5, Select 6).

The PWCtl register configures hardware page table walking for TLB
refills.

This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:

PWEn     (31)   - Hardware Page Table walker enable
PWDirExt (30)   - If 1, 4-th level implemented (MIPS64 only)
XK       (28)   - If 1, walker handles xkseg (MIPS64 only)
XS       (27)   - If 1, walker handles xsseg (MIPS64 only)
XU       (26)   - If 1, walker handles xuseg (MIPS64 only)
DPH      (7)    - Dual Page format of Huge Page support
HugePg   (6)    - Huge Page PTE supported in Directory levels
PSn      (5..0) - Bit position of PTEvld in Huge Page PTE

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Yongbok Kim
20b28ebc49 target/mips: Add CP0 PWSize register
Add PWSize register (CP0 Register 5, Select 7).

The PWSize register configures hardware page table walking for TLB
refills.

This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:

BDW  (37..32) Base Directory index width (MIPS64 only)
GDW  (29..24) Global Directory index width
UDW  (23..18) Upper Directory index width
MDW  (17..12) Middle Directory index width
PTW  (11..6 ) Page Table index width
PTEW ( 5..0 ) Left shift applied to the Page Table index

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Yongbok Kim
fa75ad1459 target/mips: Add CP0 PWField register
Add PWField register (CP0 Register 5, Select 6).

The PWField register configures hardware page table walking for TLB
refills.

This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:

MIPS64:
BDI  (37..32) - Base Directory index
GDI  (29..24) - Global Directory index
UDI  (23..18) - Upper Directory index
MDI  (17..12) - Middle Directory index
PTI  (11..6 ) - Page Table index
PTEI ( 5..0 ) - Page Table Entry shift

MIPS32:
GDW  (29..24) - Global Directory index
UDW  (23..18) - Upper Directory index
MDW  (17..12) - Middle Directory index
PTW  (11..6 ) - Page Table index
PTEW ( 5..0 ) - Page Table Entry shift

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Matthew Fortune
e222f50672 target/mips: Implement emulation of nanoMIPS ROTX instruction
Added a helper for ROTX based on the pseudocode from the
architecture spec. This instraction was not present in previous
MIPS instruction sets.

Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24 17:51:59 +02:00
James Hogan
cec56a733d target/mips: Add segmentation control registers
The optional segmentation control registers CP0_SegCtl0, CP0_SegCtl1 &
CP0_SegCtl2 control the behaviour and required privilege of the legacy
virtual memory segments.

Add them to the CP0 interface so they can be read and written when
CP0_Config3.SC=1, and initialise them to describe the standard legacy
layout so they can be used in future patches regardless of whether they
are exposed to the guest.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
Richard Henderson
1a0196c5c7 target-mips: Use clz opcode
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:06:11 -08:00
Thomas Huth
fcf5ef2ab5 Move target-* CPU file into a target/ folder
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.

Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-12-20 21:52:12 +01:00