The same way the arch tag is being used as a fallback for the arch
parameter, let's do the same for QEMU's machine and avoid some boiler
plate code.
This is now possible because, since Avocado 72.0, it's possible to use
tags with names that match the machine types on QEMU.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191104151323.9883-4-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Now than we use the stable snapshot archive, we can remove this check.
This reverts commit d2499aca4b.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191126223810.20180-3-philmd@redhat.com>
Tested-by: Willian Rampazzo <wrampazz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The kernel packaged was fetched from an unstable repository.
Use the stable snapshot archive instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191126223810.20180-2-philmd@redhat.com>
Tested-by: Willian Rampazzo <wrampazz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
There's an updated version of the Debian package containing the m68k
Kernel.
Now, if the package gets updated again, the test won't fail, but will
be canceled. A more permanent solution is certainly needed.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191029232320.12419-3-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The Linux kernel that is extracted from a Debian package for the q800
machine test is hosted on a "pool" location. AFAICT, it gets updated
without too much ceremony, and I don't see any archival location that
is stable enough.
For now, to avoid test errors, let's cancel the test if fetching the
package fails.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191029232320.12419-2-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
-----BEGIN PGP SIGNATURE-----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=0cvU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python (acceptance tests) queue, 2019-10-28
# gpg: Signature made Mon 28 Oct 2019 23:43:11 GMT
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
tests/boot_linux_console: Run BusyBox on 5KEc 64-bit cpu
tests/boot_linux_console: Add initrd test for the Exynos4210
tests/boot_linux_console: Add a test for the Raspberry Pi 2
tests/boot_linux_console: Use Avocado archive::gzip_uncompress()
.travis.yml: Let the avocado job run the 40p tests
tests/acceptance: Test OpenBIOS on the PReP/40p
tests/acceptance: Add test that runs NetBSD 4.0 installer on PRep/40p
.travis.yml: Let the avocado job run the Leon3 test
tests/acceptance: Add test that boots the HelenOS microkernel on Leon3
tests/acceptance: Refactor exec_command_and_wait_for_pattern()
tests/acceptance: Send <carriage return> on serial lines
tests/acceptance: Fix wait_for_console_pattern() hangs
Acceptance tests: refactor wait_for_console_pattern
Python libs: close console sockets before shutting down the VMs
Acceptance tests: work around socket dir
MAINTAINERS: update location of Python libraries
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This tests boots a Linux kernel on a Malta machine up to a
busybox shell on the serial console. Few commands are executed
before halting the machine (via reboot).
We use the Fedora 24 kernel extracted from the image at:
https://fedoraproject.org/wiki/Architectures/MIPS
and the initrd cpio image from the kerneltests project:
https://kerneltests.org/
If MIPS is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips" tags.
Alternatively, this test can be run using:
$ AVOCADO_ALLOW_UNTRUSTED_CODE=yes \
avocado --show=console run -t arch:mips64el \
tests/acceptance/boot_linux_console.py
console: [ 0.000000] Linux version 3.19.3.mtoman.20150408 (mtoman@debian-co3-1) (gcc version 5.0.0 20150316 (Red Hat 5.0.0-0.20) (GCC) ) #3 Wed Apr 8 14:32:50 UTC 2015
console: [ 0.000000] Early serial console at I/O port 0x3f8 (options '38400n8')
console: [ 0.000000] bootconsole [uart0] enabled
console: [ 0.000000] CPU0 revision is: 00018900 (MIPS 5KE)
console: [ 0.000000] Checking for the multiply/shift bug... no.
console: [ 0.000000] Checking for the daddiu bug... no.
[...]
console: Boot successful.
console: cat /proc/cpuinfo
console: / # cat /proc/cpuinfo
console: system type : MIPS Malta
console: machine : Unknown
console: processor : 0
console: cpu model : MIPS 5KE V0.0
console: : 1616.89
console: wait instruction : nouname -a
console: microsecond timers : yes
console: tlb_entries : 32
console: extra interrupt vector : yes
console: hardware watchpoint : yes, count: 1, address/irw mask: [0x0ff8]
console: isa : mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
console: ASEs implemented :
console: shadow register sets : 1
console: kscratch registers : 0
console: package : 0
console: core : 0
console: VCED exceptions : not available
console: VCEI exceptions : not available
console: / #
console: / # uname -a
console: Linux buildroot 3.19.3.mtoman.20150408 #3 Wed Apr 8 14:32:50 UTC 2015 mips64 GNU/Linux
console: reboot
console: / #
console: / # reboot
console: / #
console: / # reboot: Restarting system
PASS (7.04 s)
JOB TIME : 7.20 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-27-philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This test boots a Linux kernel on a smdkc210 board and verify
the serial output is working.
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
This test can be run using:
$ IGNORE_AVOCADO_CONSOLE_BUG=yes \
avocado --show=app,console run -t machine:smdkc210 \
tests/acceptance/boot_linux_console.py
console: Booting Linux on physical CPU 0x900
console: Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
console: CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
console: OF: fdt: Machine model: Samsung smdkv310 evaluation board based on Exynos4210
[...]
console: Samsung CPU ID: 0x43210211
console: random: get_random_bytes called from start_kernel+0xa0/0x504 with crng_init=0
console: percpu: Embedded 17 pages/cpu s39756 r8192 d21684 u69632
console: Built 1 zonelists, mobility grouping on. Total pages: 249152
console: Kernel command line: printk.time=0 console=ttySAC0,115200n8 earlyprintk random.trust_cpu=off cryptomgr.notests cpuidle.off=1 panic=-1 noreboot
[...]
console: L2C: platform modifies aux control register: 0x02020000 -> 0x3e420001
console: L2C: platform provided aux values permit register corruption.
console: L2C: DT/platform modifies aux control register: 0x02020000 -> 0x3e420001
console: L2C-310 erratum 769419 enabled
console: L2C-310 enabling early BRESP for Cortex-A9
console: L2C-310: enabling full line of zeros but not enabled in Cortex-A9
console: L2C-310 ID prefetch enabled, offset 1 lines
console: L2C-310 dynamic clock gating disabled, standby mode disabled
console: L2C-310 cache controller enabled, 8 ways, 128 kB
console: L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e420001
console: Exynos4210 clocks: sclk_apll = 12000000, sclk_mpll = 12000000
console: sclk_epll = 12000000, sclk_vpll = 12000000, arm_clk = 12000000
[...]
console: s3c-i2c 13860000.i2c: slave address 0x00
console: s3c-i2c 13860000.i2c: bus frequency set to 93 KHz
console: s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter
[...]
console: dma-pl330 12680000.pdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330 12680000.pdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
console: dma-pl330 12690000.pdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330 12690000.pdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
console: dma-pl330 12850000.mdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330 12850000.mdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-1 Num_Events-16
console: dma-pl330 12850000.mdma: PM domain LCD0 will not be powered off
console: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console: Serial: AMBA driver
console: 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 40, base_baud = 0) is a S3C6400/10
console: console [ttySAC0] enabled
console: 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 41, base_baud = 0) is a S3C6400/10
console: 13820000.serial: ttySAC2 at MMIO 0x13820000 (irq = 42, base_baud = 0) is a S3C6400/10
console: 13830000.serial: ttySAC3 at MMIO 0x13830000 (irq = 43, base_baud = 0) is a S3C6400/10
[...]
console: Freeing unused kernel memory: 2048K
console: Run /init as init process
console: mount: mounting devtmpfs on /dev failed: Device or resource busy
console: Starting logging: OK
console: Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read)
console: done.
console: Starting network: OK
console: Found console ttySAC0
console: Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
console: Boot successful.
PASS (37.98 s)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-25-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: removed conditional to skip test]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Similar to the x86_64/pc test, it boots a Linux kernel on a raspi2
board and verify the serial is working.
The kernel image and DeviceTree blob are built by the Raspbian
project (based on Debian):
https://www.raspbian.org/RaspbianImages
as recommended by the Raspberry Pi project:
https://www.raspberrypi.org/downloads/raspbian/
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:arm tests/acceptance
$ avocado run -t machine:raspi2 tests/acceptance
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-21-philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Avocado 67.0 [*] introduced the avocado.utils.archive module which
provides handling of gzip files. Use the gzip_uncompress() method.
[*] https://avocado-framework.readthedocs.io/en/67.0/api/utils/avocado.utils.html#avocado.utils.archive.gzip_uncompress
Suggested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-20-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Refactor the exec_command_and_wait_for_pattern() utility method
so we can reuse it in other files.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191028073441.6448-6-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Some firmwares don't parse the <Newline> control character and
expect a <carriage return>.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-5-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The same utility method is already present in two different test
files, so let's consolidate it into a single utility function.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190916164011.7653-1-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: failure_message is optional]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191028073441.6448-3-philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This test boots a Linux kernel on a Quadra 800 board
and verify the serial is working.
Example:
$ avocado --show=app,console run -t machine:q800 tests/acceptance/boot_linux_console.py
console: ABCFGHIJK
console: Linux version 5.2.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-21)) #1 Debian 5.2.9-2 (2019-08-21)
console: Detected Macintosh model: 35
console: Apple Macintosh Quadra 800
console: Built 1 zonelists, mobility grouping on. Total pages: 32448
console: Kernel command line: printk.time=0 console=ttyS0 vga=off
[...]
console: Calibrating delay loop... 1236.99 BogoMIPS (lpj=6184960)
[...]
console: NuBus: Scanning NuBus slots.
console: Slot 9: Board resource not found!
console: SCSI subsystem initialized
console: clocksource: Switched to clocksource via1
[...]
console: macfb: framebuffer at 0xf9001000, mapped to 0x(ptrval), size 468k
console: macfb: mode is 800x600x8, linelength=800
console: Console: switching to colour frame buffer device 100x37
console: fb0: DAFB frame buffer device
console: pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
console: scc.0: ttyS0 at MMIO 0x50f0c022 (irq = 4, base_baud = 230400) is a Z85c30 ESCC - Serial port
console: scc.1: ttyS1 at MMIO 0x50f0c020 (irq = 4, base_baud = 230400) is a Z85c30 ESCC - Serial port
console: Non-volatile memory driver v1.3
console: adb: Mac II ADB Driver v1.0 for Unified ADB
console: mousedev: PS/2 mouse device common for all mice
console: random: fast init done
console: Detected ADB keyboard, type <unknown>.
console: input: ADB keyboard as /devices/virtual/input/input0
console: input: ADB mouse as /devices/virtual/input/input1
console: rtc-generic rtc-generic: registered as rtc0
console: ledtrig-cpu: registered to indicate activity on CPUs
[...]
console: rtc-generic rtc-generic: setting system clock to 2019-09-10T16:20:25 UTC (1568132425)
console: List of all partitions:
console: No filesystem could mount root, tried:
JOB TIME : 2.91 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190910163430.11326-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191026164546.30020-12-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The LinuxInitrd.test_with_2gib_file_should_work_with_linux_v4_16 test,
from tests/acceptance/linux_initrd.py, is currently failing to fetch
the "vmlinuz" file. The reason for the failure is that the Fedora
project retires older versions from the "dl.fedoraproject.org" URL,
and keeps them in "archives.fedoraproject.org". As an added note,
that test uses a Fedora 28 image, because of the specific Linux kernel
version requirements of the test.
For the sake of stability, let's use URLs from the archived and
supposedely ever stable URLs. The good news is that the currently
supported versions are also hosted on the later. This change limits
itself to change the URLs, while keeping the fetched files the same
(as can be evidenced by the unchanged hashes).
Documentation and the "vm tests" fedora definition were also updated.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Yash Mankad <ymankad@redhat.com>
Message-Id: <20190904005218.12536-1-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Just like the previous tests, boots a Linux kernel on a ppc64 target
using the pseries machine.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
CC: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190607152223.9467-5-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This tests boots a Linux kernel on a Malta machine up to a
busybox shell on the serial console. Few commands are executed
before halting the machine (via reboot).
We use the initrd cpio image from the kerneltests project:
https://kerneltests.org/
If MIPS is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t arch:mips tests/acceptance/boot_linux_console.py
[...]
console: Boot successful.
[...]
console: / # uname -a
console: Linux buildroot 4.5.0-2-4kc-malta #1 Debian 4.5.5-1 (2016-05-29) mips GNU/Linux
console: / # reboot
console: / # reboot: Restarting system
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190520231910.12184-4-f4bug@amsat.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64/pc test, it boots a Linux kernel on a Malta
machine and verify the serial is working.
Use the documentation added in commit f7d257cb4a to test
nanoMIPS kernels and the I7200 CPU.
This test can be run using:
$ avocado --show=console run -t arch:mipsel tests/acceptance/boot_linux_console.py
console: [ 0.000000] Linux version 4.15.18-00432-gb2eb9a8b (emubuild@mipscs563) (gcc version 6.3.0 (Codescape GNU Tools 2018.04-02 for nanoMIPS Linux)) #1 SMP Wed Jun 27 11:10:08 PDT 2018
console: [ 0.000000] GCRs appear to have been moved (expected them at 0x1fbf8000)!
console: [ 0.000000] GCRs appear to have been moved (expected them at 0x1fbf8000)!
console: [ 0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
console: [ 0.000000] MIPS: machine is mti,malta
console: [ 0.000000] Determined physical RAM map:
console: [ 0.000000] memory: 08000000 @ 00000000 (usable)
console: [ 0.000000] earlycon: ns16550a0 at I/O port 0x3f8 (options '38400n8')
console: [ 0.000000] bootconsole [ns16550a0] enabled
console: [ 0.000000] User-defined physical RAM map:
console: [ 0.000000] memory: 10000000 @ 00000000 (usable)
console: [ 0.000000] Initrd not found or empty - disabling initrd
console: [ 0.000000] MIPS CPS SMP unable to proceed without a CM
console: [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
console: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
console: [ 0.000000] This processor doesn't support highmem. -262144k highmem ignored
console: [ 0.000000] Zone ranges:
console: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
console: [ 0.000000] HighMem empty
console: [ 0.000000] Movable zone start for each node
console: [ 0.000000] Early memory node ranges
console: [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
console: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
console: [ 0.000000] random: get_random_bytes called from start_kernel+0x60/0x2f0 with crng_init=0
console: [ 0.000000] percpu: Embedded 16 pages/cpu @(ptrval) s36620 r8192 d20724 u65536
console: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
console: [ 0.000000] Kernel command line: printk.time=0 mem=256m@@0x0 console=ttyS0 earlycon
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190520231910.12184-3-f4bug@amsat.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64/pc test, it boots a Linux kernel on an
Emcraft board and verify the serial is working.
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:arm tests/acceptance
$ avocado run -t machine:emcraft_sf2 tests/acceptance
Based on the recommended test setup from Subbaraya Sundeep:
https://lists.gnu.org/archive/html/qemu-devel/2017-05/msg03810.html
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190520220635.10961-3-f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Avoid to log empty lines in console debug logs.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190520220635.10961-2-f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Debian binary package format supports various compressions.
Per man deb(5):
NAME
deb - Debian binary package format
FORMAT
...
The third, last required member is named data.tar. It contains the
filesystem as a tar archive, either not compressed (supported since
dpkg 1.10.24), or compressed with gzip (with .gz extension),
xz (with .xz extension, supported since dpkg 1.15.6),
bzip2 (with .bz2 extension, supported since dpkg 1.10.24) or
lzma (with .lzma extension, supported since dpkg 1.13.25).
List the archive files to have the 3rd name with the correct extension.
The function avocado.utils.archive.extract() will handle the different
compression format for us.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190312234541.2887-2-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working. One extra command added to
the QEMU command line is '-vga std', because the kernel used is
known to crash without it.
If alpha is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:alpha" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:alpha tests/acceptance
$ avocado run -t machine:clipper tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-21-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on a s390x target
using the s390-ccw-virtio machine.
Because it's not possible to have multiple VT220 consoles,
'-nodefaults' is used, so that the one set with set_console() works
correctly.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-20-crosa@redhat.com>
[ehabkost: Updated kernel URL to point to fedoraproject.org]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on an arm target
using the virt machine.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-19-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on a aarch64 target
using the virt machine.
One special option added is the CPU type, given that the kernel
selected fails to boot on the virt machine's default CPU (cortex-a15).
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-18-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working.
If mips64el is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips64el"
tags.
Alternatively, this test can be run using:
$ avocado run -t arch:mips64el tests/acceptance
$ avocado run -t machine:malta tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190312171824.5134-15-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working. Also, it relies on the serial
device set by the machine itself.
If mips is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:mips tests/acceptance
$ avocado run -t machine:malta tests/acceptance
$ avocado run -t endian:big tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190312171824.5134-14-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This introduces a utility method that monitors the console device and
looks for either a message that signals the test success or failure.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-12-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When running on very low powered environments, some tests may time out
causing false negatives. As a conservative change, and for
considering that human time (investigating false negatives) is worth
more than some extra machine cycles (and time), let's increase the
overall timeout.
CC: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-11-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The 'printk.time=0' option makes it easier to parse the console
output. Let's set it as a default, and reusable, kernel command line
options for this and future similar tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-10-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Update to the stock Fedora 29 kernel, from the Fedora 28. New tests
will be added using the 29 kernel, so for consistency, let's also
update it here.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
CC: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190312171824.5134-9-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Given that the test is specific to x86_64 and pc, and new tests are
going to be added to the same class, let's rename it accordingly.
Also, let's make the class documentation not architecture specific.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-8-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, some tests contains target architecture information, in the
form of a "x86_64" tag. But that tag is not respected in the default
execution, that is, "make check-acceptance" doesn't do anything with
it.
That said, even the target architecture handling currently present in
the "avocado_qemu.Test" class is pretty limited. For instance, by
default, it chooses a target based on the host architecture.
Because the original implementation of the tags feature in Avocado did
not include any time of namespace or "key:val" mechanism, no tag has
relation to another tag. The new implementation of the tags feature
from version 67.0 onwards, allows "key:val" tags, and because of that,
a test can be classified with a tag in a given key. For instance, the
new proposed version of the "boot_linux_console.py" test, which
downloads and attempts to run a x86_64 kernel, is now tagged as:
🥑 tags=arch:x86_64
This means that it can be filtered (out) when no x86_64 target is
available. At the same time, tests that don't have a "arch:" tag,
will not be filtered out.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-6-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The Avocado test runner attemps to find its INSTRUMENTED (that is,
Python based tests) in a manner that is as safe as possible to the
user. Different from plain Python unittest, it won't load or
execute test code on an operation such as:
$ avocado list tests/acceptance/
Before version 68.0, the logic implemented to identify INSTRUMENTED
tests would require either the "🥑 enable" or "🥑
recursive" statement as a flag for tests that would not inherit
directly from "avocado.Test". This is not necessary anymore,
and because of that the boiler plate statements can now be removed.
Reference: https://avocado-framework.readthedocs.io/en/68.0/release_notes/68_0.html#users-test-writers
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190218173723.26120-1-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This test boots a Linux kernel, and checks that the given command
line was effective in two ways:
* It makes the kernel use the set "console device" as a console
* The kernel records the command line as expected in the console
Given that way too many error conditions may occur, and detecting the
kernel boot progress status may not be trivial, this test relies on a
timeout to handle unexpected situations. Also, it's *not* tagged as a
quick test for obvious reasons.
It may be useful, while interactively running/debugging this test, or
tests similar to this one, to show some of the logging channels.
Example:
$ avocado --show=QMP,console run boot_linux_console.py
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20180530184156.15634-6-crosa@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cleber Rosa
Philippe Mathieu-Daudé
Peter Maydell
Philippe Mathieu-Daudé