Commit Graph

603 Commits

Author SHA1 Message Date
Lluís Vilanova a47e87151e trace: Add event "guest_cpu_exit"
Signals the hot-unplugging of a virtual (guest) CPU.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 148278748597.1404.10546320797997984932.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-16 13:40:56 +00:00
Marc-André Lureau 7de4228344 trace-events: spelling fix
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20161212221759.28949-1-marcandre.lureau@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-16 13:40:55 +00:00
Stefan Hajnoczi 82a4118694 aio: self-tune polling time
This patch is based on the algorithm for the kvm.ko halt_poll_ns
parameter in Linux.  The initial polling time is zero.

If the event loop is woken up within the maximum polling time it means
polling could be effective, so grow polling time.

If the event loop is woken up beyond the maximum polling time it means
polling is not effective, so shrink polling time.

If the event loop makes progress within the current polling time then
the sweet spot has been reached.

This algorithm adjusts the polling time so it can adapt to variations in
workloads.  The goal is to reach the sweet spot while also recognizing
when polling would hurt more than help.

Two new trace events, poll_grow and poll_shrink, are added for observing
polling time adjustment.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-13-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03 16:38:50 +00:00
Stefan Hajnoczi 4a1cba3802 aio: add polling mode to AioContext
The AioContext event loop uses ppoll(2) or epoll_wait(2) to monitor file
descriptors or until a timer expires.  In cases like virtqueues, Linux
AIO, and ThreadPool it is technically possible to wait for events via
polling (i.e. continuously checking for events without blocking).

Polling can be faster than blocking syscalls because file descriptors,
the process scheduler, and system calls are bypassed.

The main disadvantage to polling is that it increases CPU utilization.
In classic polling configuration a full host CPU thread might run at
100% to respond to events as quickly as possible.  This patch implements
a timeout so we fall back to blocking syscalls if polling detects no
activity.  After the timeout no CPU cycles are wasted on polling until
the next event loop iteration.

The run_poll_handlers_begin() and run_poll_handlers_end() trace events
are added to aid performance analysis and troubleshooting.  If you need
to know whether polling mode is being used, trace these events to find
out.

Note that the AioContext is now re-acquired before disabling notify_me
in the non-polling case.  This makes the code cleaner since notify_me
was enabled outside the non-polling AioContext release region.  This
change is correct since it's safe to keep notify_me enabled longer
(disabling is an optimization) but potentially causes unnecessary
event_notifer_set() calls.  I think the chance of performance regression
is small here.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03 16:38:48 +00:00
Alex Williamson 4a2e242bbb memory: Don't use memcpy for ram_device regions
With a vfio assigned device we lay down a base MemoryRegion registered
as an IO region, giving us read & write accessors.  If the region
supports mmap, we lay down a higher priority sub-region MemoryRegion
on top of the base layer initialized as a RAM device pointer to the
mmap.  Finally, if we have any quirks for the device (ie. address
ranges that need additional virtualization support), we put another IO
sub-region on top of the mmap MemoryRegion.  When this is flattened,
we now potentially have sub-page mmap MemoryRegions exposed which
cannot be directly mapped through KVM.

This is as expected, but a subtle detail of this is that we end up
with two different access mechanisms through QEMU.  If we disable the
mmap MemoryRegion, we make use of the IO MemoryRegion and service
accesses using pread and pwrite to the vfio device file descriptor.
If the mmap MemoryRegion is enabled and results in one of these
sub-page gaps, QEMU handles the access as RAM, using memcpy to the
mmap.  Using either pread/pwrite or the mmap directly should be
correct, but using memcpy causes us problems.  I expect that not only
does memcpy not necessarily honor the original width and alignment in
performing a copy, but it potentially also uses processor instructions
not intended for MMIO spaces.  It turns out that this has been a
problem for Realtek NIC assignment, which has such a quirk that
creates a sub-page mmap MemoryRegion access.

To resolve this, we disable memory_access_is_direct() for ram_device
regions since QEMU assumes that it can use memcpy for those regions.
Instead we access through MemoryRegionOps, which replaces the memcpy
with simple de-references of standard sizes to the host memory.

With this patch we attempt to provide unrestricted access to the RAM
device, allowing byte through qword access as well as unaligned
access.  The assumption here is that accesses initiated by the VM are
driven by a device specific driver, which knows the device
capabilities.  If unaligned accesses are not supported by the device,
we don't want them to work in a VM by performing multiple aligned
accesses to compose the unaligned access.  A down-side of this
philosophy is that the xp command from the monitor attempts to use
the largest available access weidth, unaware of the underlying
device.  Using memcpy had this same restriction, but at least now an
operator can dump individual registers, even if blocks of device
memory may result in access widths beyond the capabilities of a
given device (RTL NICs only support up to dword).

Reported-by: Thorsten Kohfeldt <thorsten.kohfeldt@gmx.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-31 09:53:03 -06:00
Lluís Vilanova f5e2b3be82 trace: Add missing execution mode of guest events
Add missing execution mode documentation for the 'guest_cpu_enter' and
'guest_cpu_reset' events.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 147566900921.7708.656450813307396468.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12 09:54:53 +02:00
Daniel P. Berrange 170f75ad80 trace: move colo trace events to net/ sub-directory
The colo patch series added various trace events to the top
level trace-events file, despite the files using them being
in a sub-dir.

  commit 30656b097e
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Tue Sep 27 10:22:34 2016 +0800

    filter-rewriter: rewrite tcp packet to keep secondary connection

  commit f4b618360e
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Tue Sep 27 10:22:31 2016 +0800

    colo-compare: add TCP, UDP, ICMP packet comparison

    We add TCP,UDP,ICMP packet comparison to replace
    IP packet comparison. This can increase the
    accuracy of the package comparison.
    Less checkpoint more efficiency.

    Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
    Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
    Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
    Signed-off-by: Jason Wang <jasowang@redhat.com>

  commit 0682e15b19
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Tue Sep 27 10:22:30 2016 +0800

    colo-compare: introduce packet comparison thread

  commit 59509ec16b
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Tue Sep 27 10:22:27 2016 +0800

    net/colo.c: add colo.c to define and handle packet

This moves all events into net/trace-events where they
were supposed to live.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12 09:35:53 +02:00
Lluís Vilanova 43e21e4907 trace: Document the execution mode of guest events
Explicitly state in which execution mode (user, softmmu, all) are guest
events available for tracing.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 147456962135.11114.6146034359114598596.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28 19:17:55 +01:00
Lluís Vilanova 2cc2d082b5 trace: Add event "guest_cpu_reset"
Signals the reset of the state a virtual (guest) CPU.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 147428971851.15111.8799439252178273840.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28 19:17:55 +01:00
Lluís Vilanova b9d7221524 trace: Add event "guest_cpu_enter"
Signals the hot-plugging of a new virtual (guest) CPU.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 147428971313.15111.18023030883528426840.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28 19:17:55 +01:00
Daniel P. Berrange 331f5eb28a trace: move hw/virtio/virtio-balloon.c trace points into correct file
The trace points for hw/virtio/virtio-balloon.c were mistakenly put
in the top level trace-events file, instead of util/trace-events in

  commit 270ab88f7c
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Thu Jun 16 09:39:57 2016 +0100

    trace: split out trace events for hw/virtio/ directory

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1473872624-23285-5-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28 19:17:55 +01:00
Daniel P. Berrange a409aada20 trace: move util/qemu-coroutine*.c trace points into correct file
The trace points for util/qemu-coroutine*.c were mistakenly left
in the top level trace-events file, instead of util/trace-events
in

  commit 492bb2dd65
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Thu Jun 16 09:39:48 2016 +0100

    trace: split out trace events for util/ directory

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1473872624-23285-3-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28 19:17:54 +01:00
Zhang Chen 30656b097e filter-rewriter: rewrite tcp packet to keep secondary connection
We will rewrite tcp packet secondary received and sent.
When colo guest is a tcp server.

Firstly, client start a tcp handshake. the packet's seq=client_seq,
ack=0,flag=SYN. COLO primary guest get this pkt and mirror(filter-mirror)
to secondary guest, secondary get it use filter-redirector.
Then,primary guest response pkt
(seq=primary_seq,ack=client_seq+1,flag=ACK|SYN).
secondary guest response pkt
(seq=secondary_seq,ack=client_seq+1,flag=ACK|SYN).
In here,we use filter-rewriter save the secondary_seq to it's tcp connection.
Finally handshake,client send pkt
(seq=client_seq+1,ack=primary_seq+1,flag=ACK).
Here,filter-rewriter can get primary_seq, and rewrite ack from primary_seq+1
to secondary_seq+1, recalculate checksum. So the secondary tcp connection
kept good.

When we send/recv packet.
client send pkt(seq=client_seq+1+data_len,ack=primary_seq+1,flag=ACK|PSH).
filter-rewriter rewrite ack and send to secondary guest.

primary guest response pkt
(seq=primary_seq+1,ack=client_seq+1+data_len,flag=ACK)
secondary guest response pkt
(seq=secondary_seq+1,ack=client_seq+1+data_len,flag=ACK)
we rewrite secondary guest seq from secondary_seq+1 to primary_seq+1.
So tcp connection kept good.

In code We use offset( = secondary_seq - primary_seq )
to rewrite seq or ack.
handle_primary_tcp_pkt: tcp_pkt->th_ack += offset;
handle_secondary_tcp_pkt: tcp_pkt->th_seq -= offset;

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen f4b618360e colo-compare: add TCP, UDP, ICMP packet comparison
We add TCP,UDP,ICMP packet comparison to replace
IP packet comparison. This can increase the
accuracy of the package comparison.
Less checkpoint more efficiency.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen 0682e15b19 colo-compare: introduce packet comparison thread
If primary packet is same with secondary packet,
we will send primary packet and drop secondary
packet, otherwise notify COLO frame to do checkpoint.
If primary packet comes but secondary packet does not,
after REGULAR_PACKET_CHECK_MS milliseconds we set
the primary packet as old_packet,then do a checkpoint.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen 59509ec16b net/colo.c: add colo.c to define and handle packet
The net/colo.c is used by colo-compare and filter-rewriter.
this can share common data structure like net packet,
and other functions.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:21 +08:00
Marc-André Lureau 5c678ee8d9 monitor: use qmp_dispatch()
Replace the old manual dispatch and validation code by the generic one
provided by qapi common code.

Note that it is now possible to call the following commands that used to
be disabled by compile-time conditionals:
- dump-skeys
- query-spice
- rtc-reset-reinjection
- query-gic-capabilities

Their fallback functions return an appropriate "feature disabled" error.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160912091913.15831-16-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-19 17:32:22 +02:00
Paul Durrant b7665c6027 xen: handle inbound migration of VMs without ioreq server pages
VMs created on older versions on Xen will not have been provisioned with
pages to support creation of non-default ioreq servers. In this case
the ioreq server API is not supported and QEMU's only option is to fall
back to using the default ioreq server pages as it did prior to
commit 3996e85c ("Xen: Use the ioreq-server API when available").

This patch therefore changes the code in xen_common.h to stop considering
a failure of xc_hvm_create_ioreq_server() as a hard failure but simply
as an indication that the guest is too old to support the ioreq server
API. Instead a boolean is set to cause reversion to old behaviour such
that the default ioreq server is then used.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
2016-08-12 16:38:30 -07:00
Peter Xu 54a6c11b20 kvm-all: add trace events for kvm irqchip ops
These will help us monitoring irqchip route activities more easily.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21 20:44:19 +03:00
Lluís Vilanova 9c15e70086 trace: [*-user] Add events to trace guest syscalls in syscall emulation mode
Adds two events to trace syscalls in syscall emulation mode (*-user):

* guest_user_syscall: Emitted before the syscall is emulated; contains
  the syscall number and arguments.

* guest_user_syscall_ret: Emitted after the syscall is emulated;
  contains the syscall number and return value.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146651712411.12388.10024905980452504938.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-28 21:14:12 +01:00
Daniel P. Berrange f52347d5b0 trace: split out trace events for linux-user/ directory
Move all trace-events for files in the linux-user/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 1466066426-16657-41-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:17 +01:00
Daniel P. Berrange 38b1eedcdc trace: split out trace events for qom/ directory
Move all trace-events for files in the qom/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-40-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:17 +01:00
Daniel P. Berrange 6dfba0ef6e trace: split out trace events for target-ppc/ directory
Move all trace-events for files in the target-ppc/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1466066426-16657-39-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:17 +01:00
Daniel P. Berrange a4e21b3e35 trace: split out trace events for target-s390x/ directory
Move all trace-events for files in the target-s390x/ directory to
their own file.

[Added missing newline in target-s390x/trace-events as suggested by
Cornelia Huck <cornelia.huck@de.ibm.com>.
--Stefan]

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1466066426-16657-38-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:17 +01:00
Daniel P. Berrange 1cba9b2942 trace: split out trace events for target-sparc/ directory
Move all trace-events for files in the target-sparc/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-37-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:17 +01:00
Daniel P. Berrange f3b0163b18 trace: split out trace events for net/ directory
Move all trace-events for files in the net/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-36-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:17 +01:00
Daniel P. Berrange 66d7a36d75 trace: split out trace events for audio/ directory
Move all trace-events for files in the audio/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-35-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:17 +01:00
Daniel P. Berrange 357ac7f318 trace: split out trace events for ui/ directory
Move all trace-events for files in the ui/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-34-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:17 +01:00
Daniel P. Berrange 4f92ce1376 trace: split out trace events for hw/alpha/ directory
Move all trace-events for files in the hw/alpha/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-33-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:17 +01:00
Daniel P. Berrange 0b8276d644 trace: split out trace events for hw/arm/ directory
Move all trace-events for files in the hw/arm/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-32-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange 65b5bd3be5 trace: split out trace events for hw/acpi/ directory
Move all trace-events for files in the hw/acpi/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-31-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange 1cf6ebc73f trace: split out trace events for hw/vfio/ directory
Move all trace-events for files in the hw/vfio/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-30-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange 80aa71e98d trace: split out trace events for hw/s390x/ directory
Move all trace-events for files in the hw/s390x/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1466066426-16657-29-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange fec28134e5 trace: split out trace events for hw/pci/ directory
Move all trace-events for files in the hw/pci/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-28-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange 3054fba87b trace: split out trace events for hw/ppc/ directory
Move all trace-events for files in the hw/ppc/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1466066426-16657-27-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange d018a2e931 trace: split out trace events for hw/9pfs/ directory
Move all trace-events for files in the hw/9pfs/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-26-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange 5eb76e480b trace: split out trace events for hw/i386/ directory
Move all trace-events for files in the hw/i386/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-25-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange 2b785e3cbf trace: split out trace events for hw/isa/ directory
Move all trace-events for files in the hw/isa/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-24-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange 1374aecc7c trace: split out trace events for hw/sd/ directory
Move all trace-events for files in the hw/sd/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-23-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange f0b9e35687 trace: split out trace events for hw/sparc/ directory
Move all trace-events for files in the hw/sparc/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-22-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange 8101345076 trace: split out trace events for hw/dma/ directory
Move all trace-events for files in the hw/dma/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-21-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange c3e203f30d trace: split out trace events for hw/timer/ directory
Move all trace-events for files in the hw/timer/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-20-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Daniel P. Berrange d1d5119864 trace: split out trace events for hw/input/ directory
Move all trace-events for files in the hw/input/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-19-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:15 +01:00
Daniel P. Berrange 14750ef1b5 trace: split out trace events for hw/display/ directory
Move all trace-events for files in the hw/display/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-18-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:15 +01:00
Daniel P. Berrange ddc63e4556 trace: split out trace events for hw/nvram/ directory
Move all trace-events for files in the hw/nvram/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-17-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:15 +01:00
Daniel P. Berrange de4291ca4a trace: split out trace events for hw/scsi/ directory
Move all trace-events for files in the hw/scsi/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-16-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:15 +01:00
Daniel P. Berrange 7da2981e59 trace: split out trace events for hw/usb/ directory
Move all trace-events for files in the hw/usb/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-15-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:15 +01:00
Daniel P. Berrange 6b5bacf6af trace: split out trace events for hw/misc/ directory
Move all trace-events for files in the hw/misc/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:15 +01:00
Daniel P. Berrange 92fe6aff87 trace: split out trace events for hw/audio/ directory
Move all trace-events for files in the hw/audio/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-13-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:15 +01:00
Daniel P. Berrange 270ab88f7c trace: split out trace events for hw/virtio/ directory
Move all trace-events for files in the hw/virtio/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-12-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:15 +01:00