Correct path to headers in tests/tcg/mips/user/ase/msa/bit-counting/*
source files.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Fix 32/64 bit issue in a line involving shift operator. "1 << ..."
calculation of size is done as a 32-bit signed integer which may
then be unintentionally sign-extended into the 64-bit result. The
problem was discovered by Coverity (CID 1398648). Using "1ULL"
instead of "1" on the LHS of the shift fixes this problem.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Especially when dealing with out-of-line gvec helpers, it is often
helpful to specify some vector pointers as constant. E.g. when
we have two inputs and one output, marking the two inputs as consts
pointers helps to avoid bugs.
Const pointers can be specified via "cptr", however behave in TCG just
like ordinary pointers. We can specify helpers like:
DEF_HELPER_FLAGS_4(gvec_vbperm, TCG_CALL_NO_RWG, void, ptr, cptr, cptr, i32)
void HELPER(gvec_vbperm)(void *v1, const void *v2, const void *v3,
uint32_t desc)
And make sure that here, only v1 will be written (as long as const is
not casted away, of course).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190221093459.22547-1-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The last update to this file was 9 years ago. In the meantime,
4 of the 6 ideas have actually been completed. The lat two do
not actually make sense anymore.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The region 0x40010000 .. 0x4001ffff and its secure-only alias
at 0x50010000... are for per-CPU devices. We implement this by
giving each CPU its own container memory region, where the
per-CPU devices live. Unfortunately, the alias region which
makes devices mapped at 0x4... addresses also appear at 0x5...
is only implemented in the overall "all CPUs" container. The
effect of this bug is that the CPU_IDENTITY register block appears
only at 0x4001f000, but not at the 0x5001f000 alias where it should
also appear. Guests (like very recent Arm Trusted Firmware-M)
which try to access it at 0x5001f000 will crash.
Fix this by moving the handling for this alias from the "all CPUs"
container to the per-CPU container. (We leave the aliases for
0x1... and 0x3... in the overall container, because there are
no per-CPU devices there.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190215180500.6906-1-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Wire up the two PL011 UARTs in the Musca board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Wire up the PL031 RTC for the Musca board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Musca board puts its SRAM and flash behind TrustZone
Memory Protection Controllers (MPCs). Each MPC sits between
the CPU and the RAM/flash, and also has a set of memory mapped
control registers. Wire up the MPCs, and the memory behind them.
For the moment we implement the flash as simple ROM, which
cannot be reprogrammed by the guest.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Many of the devices on the Musca board live behind TrustZone
Peripheral Protection Controllers (PPCs); add models of the
PPCs, using a similar scheme to the MPS2 board models.
This commit wires up the PPCs with "unimplemented device"
stubs behind them in the correct places in the address map.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Musca-A and Musca-B1 development boards are based on the
SSE-200 subsystem for embedded. Implement an initial skeleton
model of these boards, which are similar but not identical.
This commit creates the board model with the SSE and the IRQ
splitters to wire IRQs up to its two CPUs. As yet there
are no devices and no memory: these will be added later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Musca boards have DAPLink firmware that sets the initial
secure VTOR value (the location of the vector table) differently
depending on the boot mode (from flash, from RAM, etc). Export
the init-svtor as a QOM property of the ARMSSE object so that
the board can change it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In commit 4b635cf7a9 we added a QOM property to the ARMSSE
object, but forgot to add it to the documentation comment in the
header. Correct the omission.
Fixes: 4b635cf7a9 ("hw/arm/armsse: Make SRAM bank size configurable")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The pl011 logs when the guest makes a bad access. It prints
the address offset in hex but confusingly omits the '0x'
prefix; add it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The PL011 UART has six interrupt lines:
* RX (receive data)
* TX (transmit data)
* RT (receive timeout)
* MS (modem status)
* E (errors)
* combined (logical OR of all the above)
So far we have only emulated the combined interrupt line;
add support for the others, so that boards that wire them
up to different interrupt controller inputs can do so.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Create a new include file for the pl011's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the debug printing in the PL031 device to use trace events,
and augment it to cover the interesting parts of device operation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Create a new include file for the pl031's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Peripheral Protection Controller's handling of unused ports
is that if there is nothing connected to the port's downstream
then it does not create the sysbus MMIO region for the upstream
end of the port. This results in odd behaviour when there is
an unused port in the middle of the range: since sysbus MMIO
regions are implicitly consecutively allocated, any used ports
above the unused ones end up with sysbus MMIO region numbers
that don't match the port number.
Avoid this numbering mismatch by creating dummy MMIO regions
for the unused ports. This doesn't change anything for our
existing boards, which don't have any gaps in the middle of
the port ranges they use; but it will be needed for the Musca
board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190215192302.27855-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed a couple of comment typos]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are lots of special cases within these insns. Split the
major argument decode/loading/saving into no_output (compares),
rd_is_dp, and rm_is_dp.
We still need to special case argument load for compare (rd as
input, rm as zero) and vcvt fixed (rd as input+output), but lots
of special cases do disappear.
Now that we have a full switch at the beginning, hoist the ISA
checks from the code generation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190215192302.27855-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all of the fp helpers out of helper.c into a new file.
This is code movement only. Since helper.c has no copyright
header, take the one from cpu.h for the new file.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190215192302.27855-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For opcodes 0-5, move some if conditions into the structure
of a switch statement. For opcodes 6 & 7, decode everything
at once with a second switch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190215192302.27855-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was introduced by
commit bf8d09694c
target/arm: Don't clear supported PMU events when initializing PMCEID1
and identified by Coverity (CID 1398645).
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190219144621.450-1-aaron@os.amperecomputing.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "background region" for a v8M MPU is a default which will be used
(if enabled, and if the access is privileged) if the access does
not match any specific MPU region. We were incorrectly using it
always (by putting the condition at the wrong nesting level). This
meant that we would always return the default background permissions
rather than the correct permissions for a specific region, and also
that we would not return the right information in response to a
TT instruction.
Move the check for the background region to the same place in the
logic as the equivalent v8M MPUCheck() pseudocode puts it.
This in turn means we must adjust the condition we use to detect
matches in multiple regions to avoid false-positives.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190214113408.10214-1-peter.maydell@linaro.org
Coverity points out (CID 1398632, CID 1398650) that we
leak a couple of allocated strings in the error-exit
code path for setting up the MHUs in the ARMSSE.
Fix this bug by moving the allocate-and-free of each
string to be closer to the use, so we do the free before
doing the error-exit check.
Fixes: f8574705f6 ("hw/arm/armsse: Add unimplemented-device stubs for MHUs")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190215113707.24553-1-peter.maydell@linaro.org
some versions of HP-UX 10.20 seems to rely on the fact that DINO
strips out the lower 2 bits of the PCI configuration address.
Also update the binary SeaBIOS distributed to the latest version
from Helge's repository, which is required with that change.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190218183314.20157-1-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If no -name is given, let's use a friendly "QEMU version" server
name. This is sometime exposed on spice client side, for example on
remote-viewer title.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-11-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spice port registration is delayed until the server is started. But
ports created after are not being registered. If the server is already
started, do vmc_register_interface() to register it from
qemu_chr_open_spice_port().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-8-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
spice_server_vm_start/stop() was added to help migration state (commit
f5bb039c6d).
However, a paused VM could keep running the spice server. This will
allow a Spice client to keep sending commands to a spice chardev. This
allows to stop/cont a VM from a Spice monitor port. Character
devices (vdagent/usb/smartcard/..) should not read from Spice when the
VM is paused.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Passing several -spice options to qemu command line, or calling
several time qemu_opts_set() will ignore all but the first option
list. Since the spice server is a singleton, it makes sense to merge
all the options, the last value being the one taken into account.
This changes the behaviour from, for ex:
$ qemu... -spice port=5900 -spice port=5901 -> port: 5900
to:
$ qemu... -spice port=5900 -spice port=5901 -> port: 5901
(if necessary we could instead produce an error when an option is
given twice, although this makes handling default values and such more
complicated)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-5-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Spice server doesn't like to be started or stopped twice . It
aborts with:
(process:6191): Spice-ERROR **: 19:29:35.912: red-worker.c:623:handle_dev_start: assertion `!worker->running' failed
It's easy to avoid that situation since qemu spice_display_is_running
tracks the server state.
After the commit "spice: do not stop spice if VM is paused", it will
be possible to pause and resume the VM, and this will call
qemu_spice_display_start() twice. The easiest is to add a check for
spice_display_is_running with this patch to avoid the assert.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Most chardev backend handle write() as discarded data if underlying
system is disconnected. For unknown historical reasons, the Spice
backend has "reliable" write: it will wait until the client end is
reconnected to do further successful write().
To decide whether it make sense to wait until the client is
reconnected (or queue the writes), let's review Spice chardev usage
and handling of a disconnected client:
* spice vdagent
The agents reopen the virtio port on disconnect. In qemu side,
virtio_serial_close() will also discard pending data.
* usb redirection
A disconnect creates a device disconnection.
* smartcard emulation
Data is discarded in passthru_apdu_from_guest().
(Spice doesn't explicitly open the smartcard char device until
upcoming 0.14.2, commit 69a5cfc74131ec0459f2eb5a231139f5a69a8037)
* spice webdavd
The daemon will restart the service, and reopen the virtio port.
* spice ports (serial console, qemu monitor..)
Depends on the associated device or usage.
- serial, may be throttled or discarded on write, depending on
device
- QMP/HMP monitor have some CLOSED event handling, but want to
flush the write, which will finish when a new client connects.
On disconnect/reconnect, the client starts with fresh sessions. If it
is a seamless migration, the client disconnects after the source
migrated. The handling of source disconnect in qemu is thus irrelevant
for the Spice session migration.
For all these use cases, it is better to discard writes when the
client is disconnected, and require the vm-side device/agent to behave
correctly on CHR_EVENT_CLOSED, to stop reading and writing from
the spice chardev.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Inform the front-end of disconnected state (spice client
disconnected).
This will wakeup the source handler immediately, so it can detect the
disconnection asap.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The license information in this file is very messy. A short note at
the beginning says GPL first, but the long boilerplate code then
talks about "GNU Lesser General Public License version 2.0". First,
there is no such version of the "GNU Lesser GPL", it only started with
version 2.1. In version 2.0, it was still called "GNU Library GPL"
instead. Second, you can easily get the license of this file wrong
if you only quickly glance at the long boilerplate code.
Anyway, looking at the text of the LGPL (see COPYING.LIB in the top
directory), the license clearly states in section "3." that one should
rather replace the license information with the GPL information in
such a case of a mixture instead. Thus let's clean up the confusing
statements and use the proper GPL text only.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 1550731902-28842-1-git-send-email-thuth@redhat.com
[ kraxel: s/v2/v2+/ as requested by Daniel ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qkbd_state_key_event() does that for us.
Fixes: 07333e1ca3 kbd-state: use state tracker for sdl2
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190208072744.10687-1-kraxel@redhat.com
Calls the new SPICE QXL interface function spice_qxl_set_device_info to
set the hardware address of the graphics device represented by the QXL
interface (e.g. a PCI path) and the device display IDs (the IDs of the
device's monitors that belong to this QXL interface).
Also stops using the deprecated spice_qxl_set_max_monitors, the new
interface function replaces it.
Signed-off-by: Lukáš Hrázký <lhrazky@redhat.com>
Message-Id: <20190215150919.8263-1-lhrazky@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
No caller of usb_ep_get() calls it with a NULL device (previous commits
have addressed the few remaining cases which didn't explicitly check).
Replace check for 'dev == NULL' with an assert instead.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 1549460216-25808-10-git-send-email-liam.merwick@oracle.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add an assert and an explicit check before the two callers to
usb_ep_get() in the USB redirector code to ensure the device
passed in is not NULL.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 1549460216-25808-9-git-send-email-liam.merwick@oracle.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In musb_packet(), the call to usb_find_device() can return NULL
if it doesn't find a device matching 'addr' so explicitly check
the return value before passing it to usb_ep_get(). This then
allows the subsequent calculation of 'id' to be streamlined.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 1549460216-25808-8-git-send-email-liam.merwick@oracle.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In uhci_handle_td(), the call to ehci_find_device() can return NULL
if it doesn't find a device matching 'addr' so explicitly check
the return value before passing it to usb_ep_get().
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 1549460216-25808-7-git-send-email-liam.merwick@oracle.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A call to ohci_find_device() can return NULL if it doesn't find a
device matching 'addr' so for the two callers, explicitly check
the return value before passing it to usb_ep_get().
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 1549460216-25808-6-git-send-email-liam.merwick@oracle.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In ehci_process_itd(), the call to ehci_find_device() can return NULL
if it doesn't find a device matching 'devaddr' so explicitly check
the return value before passing it to usb_ep_get().
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 1549460216-25808-5-git-send-email-liam.merwick@oracle.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Most callers of xhci_port_update() and xhci_wakeup() pass in a pointer
to an array entry and can never be NULL but add two defensive asserts
to protect against future changes (e.g. adding a new port speed, etc.)
adding a path through xhci_lookup_port() that could result in the
return of a NULL XHCIPort.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 1549460216-25808-3-git-send-email-liam.merwick@oracle.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Aleksandar Markovic
David Hildenbrand
Richard Henderson
Peter Maydell
Aaron Lindsay OS
Sven Schnelle
Marc-André Lureau
Thomas Huth
Gerd Hoffmann
Lukáš Hrázký
Liam Merwick