As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to address_space_translate()
and address_space_translate_cached(). Callers either have an
attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-4-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to tb_invalidate_phys_addr().
Its callers either have an attrs value to hand, or don't care
and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180521140402.23318-3-peter.maydell@linaro.org
MemoryRegionCache was reverted to "normal" address_space_* operations
for 2.9, due to lack of support for IOMMUs. Reinstate the
optimizations, caching only the IOMMU translation at address_cache_init
but not the IOMMU lookup and target AddressSpace translation are not
cached; now that MemoryRegionCache supports IOMMUs, it becomes more widely
applicable too.
The inlined fast path is defined in memory_ldst_cached.inc.h, while the
slow path uses memory_ldst.inc.c as before. The smaller fast path causes
a little code size reduction in MemoryRegionCache users:
hw/virtio/virtio.o text size before: 32373
hw/virtio/virtio.o text size after: 31941
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used to process IOMMUs in a MemoryRegionCache. This
includes a small bugfix, in that the returned page_mask is now
correctly -1 if the IOMMU memory region maps the entire address
space directly. Previously, address_space_get_iotlb_entry would
return ~TARGET_PAGE_MASK.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for extracting the IOMMU part to a separate function. Mostly
cosmetic; the only semantic change is that, if there is more than one
cascaded IOMMU and the second one fails to translate, *plen_out is now
adjusted according to the page mask of the first IOMMU.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are a couple places (one generic, one target specific) where we need
to get the host page size associated with a particular memory backend. I
have some upcoming code which will add another place which wants this. So,
for convenience, add a helper function to calculate this.
host_memory_backend_pagesize() returns the host pagesize for a given
HostMemoryBackend object.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_mempath_getpagesize() gets the effective (host side) page size for
a block of memory backed by an mmap()ed file on the host. It requires
the mem_path parameter to be non-NULL.
This ends up meaning all the callers need a different case for handling
anonymous memory (for memory-backend-ram or default memory with -mem-path
is not specified).
We can make all those callers a little simpler by having
qemu_mempath_getpagesize() accept NULL, and treat that as the anonymous
memory case.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
The string returned by object_property_get_str() is dynamically allocated.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152231458624.69730.1752893648612848392.stgit@bahia.lan>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use a flag on the RAMBlock to state whether it has the
UFFDIO_ZEROPAGE capability, use it when it's available.
This allows the use of postcopy on tmpfs as well as hugepage
backed files.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Utility to give the offset of a host pointer within a RAMBlock
(assuming we already know it's in that RAMBlock)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The choice of call to discard a block is getting more complicated
for other cases. We use fallocate PUNCH_HOLE in any file cases;
it works for both hugepage and for tmpfs.
We use the DONTNEED for non-hugepage cases either where they're
anonymous or where they're private.
Care should be taken when trying other backing files.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With all targets defining CPU_RESOLVING_TYPE, refactor
cpu_parse_cpu_model(type, cpu_model) to parse_cpu_model(cpu_model)
so that callers won't have to know internal resolving cpu
type. Place it in exec.c so it could be called from both
target independed vl.c and *-user/main.c.
That allows us to stop abusing cpu type from
MachineClass::default_cpu_type
as resolver class in vl.c which were confusing part of
cpu_parse_cpu_model().
Also with new parse_cpu_model(), the last users of cpu_init()
in null-machine.c and bsd/linux-user targets could be switched
to cpu_create() API and cpu_init() API will be removed by
follow up patch.
With no longer users left remove MachineState::cpu_model field,
new code should use MachineState::cpu_type instead and
leave cpu_model parsing to generic code in vl.c.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-5-git-send-email-imammedo@redhat.com>
[ehabkost: Fix bsd-user build error]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
address_space_rw is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, transform flatview_rw
into address_space_rw, since flatview_rw is otherwise unused.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_map is calling address_space_to_flatview but it can
be called outside the RCU lock. The function itself is calling
rcu_read_lock/rcu_read_unlock, just in the wrong place, so the
fix is easy.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_access_valid is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, push the rcu_read_lock/unlock
pair up from flatview_access_valid to address_space_access_valid.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_read is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, push the rcu_read_lock/unlock
pair up from flatview_read_full to address_space_read's constant size
fast path and address_space_read_full.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_write is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, push the rcu_read_lock/unlock
pair up from flatview_write to address_space_write.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently only file backed memory backend can
be created with a "share" flag in order to allow
sharing guest RAM with other processes in the host.
Add the "share" flag also to RAM Memory Backend
in order to allow remapping parts of the guest RAM
to different host virtual addresses. This is needed
by the RDMA devices in order to remap non-contiguous
QEMU virtual addresses to a contiguous virtual address range.
Moved the "share" flag to the Host Memory base class,
modified phys_mem_alloc to include the new parameter
and a new interface memory_region_init_ram_shared_nomigrate.
There are no functional changes if the new flag is not used.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Stefan Weil <sw@weilnetz.de>
Conversions that aren't followed by exit() dropped, because they might
be inappropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180203084315.20497-14-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When mmap(2) the backend files, QEMU uses the host page size
(getpagesize(2)) by default as the alignment of mapping address.
However, some backends may require alignments different than the page
size. For example, mmap a device DAX (e.g., /dev/dax0.0) on Linux
kernel 4.13 to an address, which is 4K-aligned but not 2M-aligned,
fails with a kernel message like
[617494.969768] dax dax0.0: qemu-system-x86: dax_mmap: fail, unaligned vma (0x7fa37c579000 - 0x7fa43c579000, 0x1fffff)
Because there is no common approach to get such alignment requirement,
we add the 'align' option to 'memory-backend-file', so that users or
management utils, which have enough knowledge about the backend, can
specify a proper alignment via this option.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-2-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[ehabkost: fixed typo, fixed error_setg() format string]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Flushing TB cache is required because TBs key in the cache may match
different code which existed in the previous state.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Message-Id: <20180110134846.12940.99993.stgit@pasha-VirtualBox>
[Add comment suggested by Peter Maydell. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
The dirty bitmaps are built from 'long's and there is fast-path code
for synchronising the case where the RAMBlock is aligned to the start
of a long boundary. Align the allocation to this boundary
to cause the fast path to be used.
Offsets before change:
11398@1515169675.018566:find_ram_offset size: 0x1e0000 @ 0x8000000
11398@1515169675.020064:find_ram_offset size: 0x20000 @ 0x81e0000
11398@1515169675.020244:find_ram_offset size: 0x20000 @ 0x8200000
11398@1515169675.024343:find_ram_offset size: 0x1000000 @ 0x8220000
11398@1515169675.025154:find_ram_offset size: 0x10000 @ 0x9220000
11398@1515169675.027682:find_ram_offset size: 0x40000 @ 0x9230000
11398@1515169675.032921:find_ram_offset size: 0x200000 @ 0x9270000
11398@1515169675.033307:find_ram_offset size: 0x1000 @ 0x9470000
11398@1515169675.033601:find_ram_offset size: 0x1000 @ 0x9471000
after change:
10923@1515169108.818245:find_ram_offset size: 0x1e0000 @ 0x8000000
10923@1515169108.819410:find_ram_offset size: 0x20000 @ 0x8200000
10923@1515169108.819587:find_ram_offset size: 0x20000 @ 0x8240000
10923@1515169108.823708:find_ram_offset size: 0x1000000 @ 0x8280000
10923@1515169108.824503:find_ram_offset size: 0x10000 @ 0x9280000
10923@1515169108.827093:find_ram_offset size: 0x40000 @ 0x92c0000
10923@1515169108.833045:find_ram_offset size: 0x200000 @ 0x9300000
10923@1515169108.833504:find_ram_offset size: 0x1000 @ 0x9500000
10923@1515169108.833787:find_ram_offset size: 0x1000 @ 0x9540000
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180105170138.23357-3-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add some comments so I can understand the various nested loops.
Add some tracing so I can see what they're doing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180105170138.23357-2-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We set up the io_mem_rom special memory region using the
unassigned_mem_ops structure; this is then used when a guest tries to
write to ROM. This is incorrect, because the behaviour of unassigned
memory may be different from that of ROM for writes. In particular,
on some architectures writing to unassigned memory generates a guest
exception, whereas writing to ROM is generally ignored. Use a
special readonly_mem_ops for this purpose instead, so writes to
ROM are ignored for all guest CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1513187549-2435-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Renaming cpu address space names so that they won't be the same when
there are more than one.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171123092333.16085-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Normally we create an address space for that CPU and pass that address
space into the function. Let's just do it inside to unify address space
creations. It'll simplify my next patch to rename those address spaces.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171123092333.16085-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
exec: housekeeping (funny since 02d0e09503)
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The function notdirty_mem_write() has a sequence of actions
it has to do before and after the actual business of writing
data to host RAM to ensure that dirty flags are correctly
updated and we flush any TCG translations for the region.
We need to do this also in other places that write directly
to host RAM, most notably the TCG atomic helper functions.
Pull out the before and after pieces into their own functions.
We use an API where the prepare function stashes the various
bits of information about the write into a struct for the
complete function to use, because in the calls for the atomic
helpers the place where the complete function will be called
doesn't have the information to hand.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1511201308-23580-2-git-send-email-peter.maydell@linaro.org
This fixes a crash caused by picking the wrong memory region in
address_space_lookup_region seen with client code accessing a device
model that uses alias memory regions. The expensive part of
address_space_lookup_region anyway is phys_page_find; performance-wise
it is okay to repeat the subsequent subpage lookup.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20171114225941.072707456B5@zero.eik.bme.hu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
55c3cee ("qom: Introduce CPUClass.tcg_initialize", 2017-10-24)
introduces a per-CPUClass bool that we check so that the target CPU
is initialized for TCG only once. This works well except when
we end up creating more than one CPUClass, in which case we end
up incorrectly initializing TCG more than once, i.e. once for
each CPUClass.
This can be replicated with:
$ aarch64-softmmu/qemu-system-aarch64 -machine xlnx-zcu102 -smp 6 \
-global driver=xlnx,,zynqmp,property=has_rpu,value=on
In this case the class name of the "RPUs" is prefixed by "cortex-r5-",
whereas the "regular" CPUs are prefixed by "cortex-a53-". This
results in two CPUClass instances being created.
Fix it by introducing a static variable, so that only the first
target CPU being initialized will initialize the target-dependent
part of TCG, regardless of CPUClass instances.
Fixes: 55c3ceef61
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1510343626-25861-2-git-send-email-cota@braap.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were generating code during tb_invalidate_phys_page_range,
check_watchpoint, cpu_io_recompile, and (seemingly) discarding
the TB, assuming that it would magically be picked up during
the next iteration through the cpu_exec loop.
Instead, record the desired cflags in CPUState so that we request
the proper TB so that there is no more magic.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable us to decouple code translation from the value
of parallel_cpus at any given time. It will also help us minimize
TB flushes when generating code via EXCP_ATOMIC.
Note that the declaration of parallel_cpus is brought to exec-all.h
to be able to define there the "curr_cflags" inline.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move target cpu tcg initialization to common code,
called from cpu_exec_realizefn.
Acked-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Aligned 8-byte memory writes by a 64-bit target on a 64-bit host should
always turn into atomic 8-byte writes on the host, however a write
write watchpoint would end up tearing the 8-byte write into two 4-byte
writes in access_with_adjusted_size().
Reported-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Aligned 8-byte memory writes by a 64-bit target on a 64-bit host should
always turn into atomic 8-byte writes on the host, however if we missed
in the softmmu, and the TLB line was marked as not dirty, then we
would end up tearing the 8-byte write into two 4-byte writes in
access_with_adjusted_size().
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-Id: <20171013181913.7556-1-Andrew.Baumann@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch let address_space_get_iotlb_entry() to use the newly
introduced page_mask parameter in flatview_do_translate(). Then we
will be sure the IOTLB can be aligned to page mask, also we should
nicely support huge pages now when introducing a764040.
Fixes: a764040 ("exec: abstract address_space_do_translate()")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20171010094247.10173-3-maxime.coquelin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function is originally used for flatview_space_translate() and what
we care about most is (xlat, plen) range. However for iotlb requests, we
don't really care about "plen", but the size of the page that "xlat" is
located on. While, plen cannot really contain this information.
A simple example to show why "plen" is not good for IOTLB translations:
E.g., for huge pages, it is possible that guest mapped 1G huge page on
device side that used this GPA range:
0x100000000 - 0x13fffffff
Then let's say we want to translate one IOVA that finally mapped to GPA
0x13ffffe00 (which is located on this 1G huge page). Then here we'll
get:
(xlat, plen) = (0x13fffe00, 0x200)
So the IOTLB would be only covering a very small range since from
"plen" (which is 0x200 bytes) we cannot tell the size of the page.
Actually we can really know that this is a huge page - we just throw the
information away in flatview_do_translate().
This patch introduced "page_mask" optional parameter to capture that
page mask info. Also, I made "plen" an optional parameter as well, with
some comments for the whole function.
No functional change yet.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20171010094247.10173-2-maxime.coquelin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These only depend on the host and therefore belong in the common
osdep, not in a target-dependent object.
While at it, query the host during an init constructor, which guarantees
the page size will be well-defined throughout the execution of the program.
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This adds a new "-d" switch to "info mtree" to print dispatch tree
internals.
This changes the way "-f" is handled - it prints now flat views and
associated address spaces.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-15-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This renames some helpers to reflect better what they do.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-9-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We store AddressSpaceDispatch* in FlatView anyway so there is no need
to carry it from mem_add() to register_subpage/register_multipage.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-8-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AS in ASD is only used to pass AS from mem_begin() to register_subpage()
to store it in MemoryRegionSection, we can do this directly now.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-6-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As we are going to share FlatView's between AddressSpace's,
and AddressSpaceDispatch is a structure to perform quick lookup
in FlatView, this moves ASD to FlatView.
After previosly open coded ASD rendering, we can also remove
as->next_dispatch as the new FlatView pointer is stored
on a stack and set to an AS atomically.
flatview_destroy() is executed under RCU instead of
address_space_dispatch_free() now.
This makes mem_begin/mem_commit to work with ASD and mem_add with FV
as later on mem_add will be taking FV as an argument anyway.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-5-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are going to share FlatView's between AddressSpace's and per-AS
memory listeners won't suit the purpose anymore so open code
the dispatch tree rendering.
Since there is a good chance that dispatch_listener was the only
listener, this avoids address_space_update_topology_pass() if there is
no registered listeners; this should improve starting time.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-3-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds an AS** parameter to address_space_do_translate()
to make it easier for the next patch to share FlatViews.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-2-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All but a handful of files include exec/cpu-all.h via cpu.h only.
As these files already include cpu.h, let's just drop the additional
include.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Peter Maydell
Paolo Bonzini
David Gibson
Greg Kurz
Dr. David Alan Gilbert
Igor Mammedov
Marcel Apfelbaum
Alistair Francis
Haozhong Zhang
Pavel Dovgalyuk
Peter Xu
Philippe Mathieu-Daudé
Emilio G. Cota
Richard Henderson
Andrew Baumann
Alexey Kardashevskiy
David Hildenbrand