Commit Graph

650 Commits

Author SHA1 Message Date
Dmitry Fleytman 566342c312 eth: Extend vlan stripping functions
Make VLAN stripping functions return number of bytes
copied to given Ethernet header buffer.

This information should be used to re-compose
packet IOV after VLAN stripping.

Cc: qemu-stable@nongnu.org
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-03-06 11:46:02 +08:00
Marc-André Lureau e7c83a885f vhost-user: delay vhost_user_stop
Since commit b0a335e351, a socket write
may trigger a disconnect events, calling vhost_user_stop() and clearing
all the vhost_dev strutures holding data that vhost.c functions expect
to remain valid. Delay the cleanup to keep the vhost_dev structure
valid during the vhost.c functions.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170227104956.24729-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28 19:11:15 +00:00
Markus Armbruster d3be4b57ce net: Flatten simple union NetLegacyOptions
Simple unions are simpler than flat unions in the schema, but more
complicated in C and on the QMP wire: there's extra indirection in C
and extra nesting on the wire, both pointless.  They're best avoided
in new code.

NetLegacyOptions isn't new, but it's only used internally, not in QMP.
Convert it to a flat union.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487709988-14322-3-git-send-email-armbru@redhat.com>
2017-02-22 19:50:52 +01:00
Zhang Chen a935cc3132 colo-compare: sort TCP packet queue by sequence number
Improve efficiency of TCP packet comparison.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-02-15 11:18:57 +08:00
Thomas Huth a2dbe1356f net: Mark 'vlan' parameter as deprecated
The 'vlan' parameter is a continuous source of confusion for the users,
many people mix it up with the more common term VLAN (the link layer
packet encapsulation), and even if they realize that the QEMU 'vlan' is
rather some kind of network hub emulation, there is still a high risk
that they configure their QEMU networking in a wrong way with this
parameter (e.g. by hooking NICs together, so they get a 'loopback'
between one and the other NIC).
Thus at one point in time, we should finally get rid of the 'vlan'
feature in QEMU. Let's do a first step in this direction by declaring
the 'vlan' parameter as deprecated and informing the users to use the
'netdev' parameter instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-02-15 11:18:57 +08:00
Marc-André Lureau e0b283e7c5 vhost-user: delete chardev on cleanup
Remove the chardev implicitly when cleaning up the netdev. This
prevents from reusing the chardev since it would be in an incorrect
state with the slave.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1256618

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-02-01 03:37:18 +02:00
Marc-André Lureau 0ec7b3e7f2 char: rename CharDriverState Chardev
Pick a uniform chardev type name.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27 18:07:59 +01:00
Peter Maydell db655a9653 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJYgXzxAAoJEO8Ells5jWIRgtAIAKuFrOBE/xJnjd/45sVKcx2j
 fsohKHF8T/eLmt5sw+MhGtnM/oRJRUX8kGpA9AU8m6TCSaTYh2tOKX5lwrykuAzk
 feqz2pqZFwiLWs5Ro7qEQIhMkqtFetODvKd05qnKnAldj8SC45czKxdghmSP/B+w
 4nnDEdqVqUuUseDCa1mW1b4f6g1N93LbgChK7lK9Xqg+OqeEbQ7nLgVvcWvN7+Ea
 DfDKWP8tjQ5QhjzFWc4wa9/Tx+0HI7Dn57fv98XdJMvm1kt/MdnO7QKAXWmHH5s/
 6DX+NHgN0ZAn85gv/ufq1F9C4TstbAoZA9EOGhoBJ5ww8mueARB3L2iCj+OcS9A=
 =gkbh
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Fri 20 Jan 2017 02:58:57 GMT
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  tap: fix memory leak on failure in net_init_tap()
  hw/pci: use-after-free in pci_nic_init_nofail when nic device fails to initialize
  hw/net/dp8393x: Avoid unintentional sign extensions on addresses
  m68k: QOMify the MCF Fast Ethernet Controller device
  net: optimize checksum computation
  docs: Fix description of the sentence

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20 14:56:40 +00:00
Peter Maydell fac7d7b1cd tap: fix memory leak on failure in net_init_tap()
Commit 091a6b2ac fixed most of the memory leaks in failure
paths in net_init_tap() reported by Coverity (CID 1356216),
but missed one. Fix it by deferring the allocation of
fds and vhost_fds until after the error check.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-01-20 10:58:26 +08:00
Ladi Prosek d5aa3e6e0c net: optimize checksum computation
Very simple loop optimization with a significant performance impact.

Microbenchmark results, modern x86-64:

buffer size | speed up
------------+---------
1500        | 1.7x
64          | 1.5x
8           | 1.15x

Microbenchmark results, POWER7:

buffer size | speed up
------------+---------
1500        | 5x
64          | 3.3x
8           | 1.13x

There is a lot of room for further improvement at the expense of
code complexity - aligned multibyte reads, LE/BE considerations,
architecture-specific optimizations, etc. This patch still keeps
things simple and readable.

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-01-20 10:36:38 +08:00
Jason Wang c471ad0e9b vhost_net: device IOTLB support
This patches implements Device IOTLB support for vhost kernel. This is
done through:

1) switch to use dma helpers when map/unmap vrings from vhost codes
2) introduce a set of VhostOps to:
   - setting up device IOTLB request callback
   - processing device IOTLB request
   - processing device IOTLB invalidation
2) kernel support for Device IOTLB API:

- allow vhost-net to query the IOMMU IOTLB entry through eventfd
- enable the ability for qemu to update a specified mapping of vhost
- through ioctl.
- enable the ability to invalidate a specified range of iova for the
  device IOTLB of vhost through ioctl. In x86/intel_iommu case this is
  triggered through iommu memory region notifier from device IOTLB
  invalidation descriptor processing routine.

With all the above, kernel vhost_net can co-operate with userspace
IOMMU. For vhost-user, the support could be easily done on top by
implementing the VhostOps.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-18 22:59:53 +02:00
Pavel Dovgalyuk 646c5478c0 record/replay: add network support
This patch adds support of recording and replaying network packets in
irount rr mode.

Record and replay for network interactions is performed with the network filter.
Each backend must have its own instance of the replay filter as follows:
 -netdev user,id=net1 -device rtl8139,netdev=net1
 -object filter-replay,id=replay,netdev=net1

Replay network filter is used to record and replay network packets. While
recording the virtual machine this filter puts all packets coming from
the outer world into the log. In replay mode packets from the log are
injected into the network device. All interactions with network backend
in replay mode are disabled.

v5 changes:
 - using iov_to_buf function instead of loop

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-01-06 10:38:00 +08:00
Daniel P. Berrange e79cd40680 net: fix sending of data with -net socket, listen backend
The use of -net socket,listen was broken in the following
commit

  commit 16a3df403b
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Fri May 13 15:35:19 2016 +0800

    net/net: Add SocketReadState for reuse codes

    This function is from net/socket.c, move it to net.c and net.h.
    Add SocketReadState to make others reuse net_fill_rstate().
    suggestion from jason.

This refactored the state out of NetSocketState into a
separate SocketReadState. This refactoring requires
that a callback is provided to be triggered upon
completion of a packet receive from the guest.

The patch only registered this callback in the codepaths
hit by -net socket,connect, not -net socket,listen. So
as a result packets sent by the guest in the latter case
get dropped on the floor.

This bug is hidden because net_fill_rstate() silently
does nothing if the callback is not set.

This patch adds in the middle callback registration
and also adds an assert so that QEMU aborts if there
are any other codepaths hit which are missing the
callback.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-11-15 15:36:21 +08:00
Paolo Bonzini d14fabd9c2 slirp: fix CharDriver breakage
SLIRP expects a CharBackend as the third argument to slirp_add_exec,
but net/slirp.c was passing a CharDriverState.  Fix this to restore
guestfwd functionality.

Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-02 09:28:56 +01:00
Peter Maydell 277d44f5a6 trivial patches for 2016-10-28
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJYE2wfAAoJEHAbT2saaT5ZGYUH/3QWJ4OFWbqGo1YYN5AIAheF
 v1bQGTh1HGbLk46ajhUvzB0bMHb1FC1KoOruU2wFYuKK/J5zQ+4X9EmaC/fD7hyx
 nGTcPWAyxKOlqOq3In9ro+xWQNzEhfoypKCQQVC4Y3quzub48wAro8fuFSNXLyBq
 ERvAsjgj0TrLEHoWtJl2bPYiqSd6KAHZAKPFW3Jw8MmsBcTLmnF2PVW3LBfdcHe7
 6vlhqX7lPzVlHRaUsaxRkFxYd2YGisbe3bPRDw2fTxrtOYyEkopQq7xi2Q6Yq5N0
 z0yM2oJ7o1QtUOXYa7KBf03WZ7e119HimaUkGLg+0LVhQNbeG3hd3gNwApXa5og=
 =tYml
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging

trivial patches for 2016-10-28

# gpg: Signature made Fri 28 Oct 2016 16:17:51 BST
# gpg:                using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* remotes/mjt/tags/trivial-patches-fetch: (23 commits)
  Fix build for less common build directories names
  clean-up: removed duplicate #includes
  scripts/clean-includes: added duplicate #include check
  monitor: deprecate 'default' option
  qemu-ga: Remove stray 'q' in documentation
  Makefile: Fix help text for target 'installer'
  s390: avoid always-true comparison in s390_pci_generate_fid()
  migration: Remove unneeded NULL check from migrate_fd_error()
  scripts/hxtool: fix undefined behavour of echo
  qemu-options.hx: set: fix copy-paste error
  usb: Change *_exitfn return type from int to void
  MAINTAINERS: qemu-trivial information
  colo-compare: remove unused struct CompareChardevProps and 'props' variable
  milkymist-pfpu: fix potential integer overflow
  hw/block/nvme: Simplify if-statements a little bit
  target-lm32: rewrite gen_compare()
  lm32: milkymist-tmu2: fix integer overflow
  target-lm32: disable asm logging via LOG_DIS()
  target-lm32: swap operand of wcsr in LOG_DIS()
  target-lm32: fix LOG_DIS operand order
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-31 11:58:30 +00:00
Alex Bennée 2dfe5113b1 net: split colo_compare_pkt_info into two trace events
It seems there is a limit to the number of arguments a UST trace event
can take and at 11 the previous trace command broke the build. Split the
trace into a src pkt and dst pkt trace to fix this.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20161028132559.8324-1-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28 19:00:15 +01:00
zhanghailiang 7344ffaa2d colo-compare: remove unused struct CompareChardevProps and 'props' variable
After commit 0a73336d, 'props' variable in find_and_check_chardev()
is unused. Remove it, togther with struct CompareChardevProps.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28 18:17:23 +03:00
Zhang Chen 2061c14c9b colo-proxy: fix memory leak
Fix memory leak in colo-compare.c and filter-rewriter.c
Report by Coverity and add some comments.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-10-26 09:58:02 +08:00
Brad Smith 9463c0778b tap-bsd: OpenBSD uses tap(4) now
Update the tap-bsd code now that OpenBSD uses tap(4).

Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-10-26 09:57:59 +08:00
Marc-André Lureau 39ab61c6d0 char: remove explicit_fe_open, use a set_handlers argument
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:46:10 +02:00
Marc-André Lureau c39860e6dc char: replace qemu_chr_claim/release with qemu_chr_fe_init/deinit
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.

The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:21 +02:00
Marc-André Lureau 5d300164d0 vhost-user: only initialize queue 0 CharBackend
All the queues share the same chardev. Initialize only the first queue
CharBackend, and pass it to other queues. This will allow to claim the
chardev only once in a later change.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-18-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:21 +02:00
Marc-André Lureau 5345fdb446 char: use qemu_chr_fe* functions with CharBackend argument
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:21 +02:00
Marc-André Lureau fbf3cc3a67 colo: claim in find_and_check_chardev
This factors out claiming of chardev, and changes the call to
non-fatal to return an error like the rest of the chardev checks.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-15-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:20 +02:00
Marc-André Lureau 7fa47e2a80 char: rename some frontend functions
qemu_chr_accept_input() and qemu_chr_disconnect() are only used by
frontend, so use qemu_chr_fe prefix.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-14-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:20 +02:00
Marc-André Lureau 32a6ebecd2 char: remaining switch to CharBackend in frontend
Similar to previous change, for the remaining CharDriverState front ends
users.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:20 +02:00
Marc-André Lureau b4948be93e char: remove init callback
The CharDriverState.init() callback is no longer set since commit
a61ae7f88c and thus unused. The only user, the malta FGPA display has
been converted to use an event "opened" callback instead.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:20 +02:00
Daniel P. Berrange 170f75ad80 trace: move colo trace events to net/ sub-directory
The colo patch series added various trace events to the top
level trace-events file, despite the files using them being
in a sub-dir.

  commit 30656b097e
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Tue Sep 27 10:22:34 2016 +0800

    filter-rewriter: rewrite tcp packet to keep secondary connection

  commit f4b618360e
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Tue Sep 27 10:22:31 2016 +0800

    colo-compare: add TCP, UDP, ICMP packet comparison

    We add TCP,UDP,ICMP packet comparison to replace
    IP packet comparison. This can increase the
    accuracy of the package comparison.
    Less checkpoint more efficiency.

    Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
    Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
    Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
    Signed-off-by: Jason Wang <jasowang@redhat.com>

  commit 0682e15b19
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Tue Sep 27 10:22:30 2016 +0800

    colo-compare: introduce packet comparison thread

  commit 59509ec16b
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Tue Sep 27 10:22:27 2016 +0800

    net/colo.c: add colo.c to define and handle packet

This moves all events into net/trace-events where they
were supposed to live.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12 09:35:53 +02:00
Peter Maydell 627eae7d72 virtio, pc: fixes and features
more guest error handling for virtio devices
 virtio migration rework
 pc fixes
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJX+tUfAAoJECgfDbjSjVRpIGMH/Ri+bnKF9zD6jQXfzYY+neSF
 SqR0BsFUqR+8C1Yxx45tFRC/kMpJy3n5PZunoDwAXcSlN/uoWvzp05/s44praFDc
 5FDcj3SvFhvOpBFnO5sTMBTkmGOCG/f/lnej+Fea0X8KjtOvVE6Yxek8CS+/dS3K
 t70hxLaTO93Z63olOxhAZSVX9wYKLovB0PXAu9Uj9LsnXl8o8gQLxM9WgKnI/0vD
 1V/ZGZY0lfFaHrvIgkgKy3/L7QJ91A/jU9jypNJOEdV52EDfkV97hA2ibcIQ+7Y1
 w/S3gzVmKM3dtxdS9DiQJ3riBT8XcPUWI6sIEjpfKGFGoOjazai3m9e3bcEx3Rg=
 =f//+
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pc: fixes and features

more guest error handling for virtio devices
virtio migration rework
pc fixes

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 10 Oct 2016 00:39:11 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (33 commits)
  intel-iommu: Check IOAPIC's Trigger Mode against the one in IRTE
  virtio: cleanup VMSTATE_VIRTIO_DEVICE
  vhost-vsock: convert VMSTATE_VIRTIO_DEVICE
  virtio-rng: convert VMSTATE_VIRTIO_DEVICE
  virtio-balloon: convert VMSTATE_VIRTIO_DEVICE
  virtio-scsi: convert VMSTATE_VIRTIO_DEVICE
  virtio-input: convert VMSTATE_VIRTIO_DEVICE
  virtio-gpu: convert VMSTATE_VIRTIO_DEVICE
  virtio-serial: convert VMSTATE_VIRTIO_DEVICE
  virtio-9p: convert VMSTATE_VIRTIO_DEVICE
  virtio-net: convert VMSTATE_VIRTIO_DEVICE
  virtio-blk: convert VMSTATE_VIRTIO_DEVICE
  virtio: prepare change VMSTATE_VIRTIO_DEVICE macro
  net: don't poke at chardev internal QemuOpts
  virtio-scsi: handle virtio_scsi_set_config() error
  virtio-scsi: convert virtio_scsi_bad_req() to use virtio_error()
  virtio-net: handle virtio_net_flush_tx() errors
  virtio-net: handle virtio_net_receive() errors
  virtio-net: handle virtio_net_handle_ctrl() error
  virtio-blk: handle virtio_blk_handle_request() errors
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-10 16:23:40 +01:00
Daniel P. Berrange 0a73336d96 net: don't poke at chardev internal QemuOpts
The vhost-user & colo code is poking at the QemuOpts instance
in the CharDriverState struct, not realizing that it is valid
for this to be NULL. e.g. the following crash shows a codepath
where it will be NULL:

 Program terminated with signal SIGSEGV, Segmentation fault.
 #0  0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
 617         QTAILQ_FOREACH(opt, &opts->head, next) {
 [Current thread is 1 (Thread 0x7f1d4970bb40 (LWP 6603))]
 (gdb) bt
 #0  0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
 #1  0x000055baf696b7da in net_vhost_parse_chardev (opts=0x55baf8ff9260, errp=0x7ffc51368e48) at net/vhost-user.c:314
 #2  0x000055baf696b985 in net_init_vhost_user (netdev=0x55baf8ff9250, name=0x55baf879d270 "hostnet2", peer=0x0, errp=0x7ffc51368e48) at net/vhost-user.c:360
 #3  0x000055baf6960216 in net_client_init1 (object=0x55baf8ff9250, is_netdev=true, errp=0x7ffc51368e48) at net/net.c:1051
 #4  0x000055baf6960518 in net_client_init (opts=0x55baf776e7e0, is_netdev=true, errp=0x7ffc51368f00) at net/net.c:1108
 #5  0x000055baf696083f in netdev_add (opts=0x55baf776e7e0, errp=0x7ffc51368f00) at net/net.c:1186
 #6  0x000055baf69608c7 in qmp_netdev_add (qdict=0x55baf7afaf60, ret=0x7ffc51368f50, errp=0x7ffc51368f48) at net/net.c:1205
 #7  0x000055baf6622135 in handle_qmp_command (parser=0x55baf77fb590, tokens=0x7f1d24011960) at /path/to/qemu.git/monitor.c:3978
 #8  0x000055baf6a9d099 in json_message_process_token (lexer=0x55baf77fb598, input=0x55baf75acd20, type=JSON_RCURLY, x=113, y=19) at qobject/json-streamer.c:105
 #9  0x000055baf6abf7aa in json_lexer_feed_char (lexer=0x55baf77fb598, ch=125 '}', flush=false) at qobject/json-lexer.c:319
 #10 0x000055baf6abf8f2 in json_lexer_feed (lexer=0x55baf77fb598, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-lexer.c:369
 #11 0x000055baf6a9d13c in json_message_parser_feed (parser=0x55baf77fb590, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-streamer.c:124
 #12 0x000055baf66221f7 in monitor_qmp_read (opaque=0x55baf77fb530, buf=0x7ffc51369170 "}R\204\367\272U", size=1) at /path/to/qemu.git/monitor.c:3994
 #13 0x000055baf6757014 in qemu_chr_be_write_impl (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:387
 #14 0x000055baf6757076 in qemu_chr_be_write (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:399
 #15 0x000055baf675b3b0 in tcp_chr_read (chan=0x55baf90244b0, cond=G_IO_IN, opaque=0x55baf7610a40) at qemu-char.c:2927
 #16 0x000055baf6a5d655 in qio_channel_fd_source_dispatch (source=0x55baf7610df0, callback=0x55baf675b25a <tcp_chr_read>, user_data=0x55baf7610a40) at io/channel-watch.c:84
 #17 0x00007f1d3e80cbbd in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
 #18 0x000055baf69d3720 in glib_pollfds_poll () at main-loop.c:213
 #19 0x000055baf69d37fd in os_host_main_loop_wait (timeout=126000000) at main-loop.c:258
 #20 0x000055baf69d38ad in main_loop_wait (nonblocking=0) at main-loop.c:506
 #21 0x000055baf676587b in main_loop () at vl.c:1908
 #22 0x000055baf676d3bf in main (argc=101, argv=0x7ffc5136a6c8, envp=0x7ffc5136a9f8) at vl.c:4604
 (gdb) p opts
 $1 = (QemuOpts *) 0x0

The crash occurred when attaching vhost-user net via QMP:

{
    "execute": "chardev-add",
    "arguments": {
        "id": "charnet2",
        "backend": {
            "type": "socket",
            "data": {
                "addr": {
                    "type": "unix",
                    "data": {
                        "path": "/var/run/openvswitch/vhost-user1"
                    }
                },
                "wait": false,
                "server": false
            }
        }
    },
    "id": "libvirt-19"
}
{
    "return": {

    },
    "id": "libvirt-19"
}
{
    "execute": "netdev_add",
    "arguments": {
        "type": "vhost-user",
        "chardev": "charnet2",
        "id": "hostnet2"
    },
    "id": "libvirt-20"
}

Code using chardevs should not be poking at the internals of the
CharDriverState struct. What vhost-user wants is a chardev that is
operating as reconnectable network service, along with the ability
to do FD passing over the connection. The colo code simply wants
a network service. Add a feature concept to the char drivers so
that chardev users can query the actual features they wish to have
supported. The QemuOpts member is removed to prevent future mistakes
in this area.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10 01:46:29 +03:00
Zhang Chen 52cfcb4642 net/filter-mirror: Fix mirror initial check typo
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-08 11:25:29 +03:00
Peter Lieven 47f9f15831 net: limit allocation in nc_sendv_compat
we only need to allocate enough memory to hold the packet. This might be
less than NET_BUFSIZE. Additionally fail early if the packet is larger
than NET_BUFSIZE.

Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Alexey Kardashevskiy 584613eacb tap: Allow specifying a bridge
The tap backend is already using qemu-bridge-helper to attach tap
interface to a bridge but (unlike the bridge backend) it always uses
the default bridge name - br0.

This adds a "br" property support to the tap backend.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen 30656b097e filter-rewriter: rewrite tcp packet to keep secondary connection
We will rewrite tcp packet secondary received and sent.
When colo guest is a tcp server.

Firstly, client start a tcp handshake. the packet's seq=client_seq,
ack=0,flag=SYN. COLO primary guest get this pkt and mirror(filter-mirror)
to secondary guest, secondary get it use filter-redirector.
Then,primary guest response pkt
(seq=primary_seq,ack=client_seq+1,flag=ACK|SYN).
secondary guest response pkt
(seq=secondary_seq,ack=client_seq+1,flag=ACK|SYN).
In here,we use filter-rewriter save the secondary_seq to it's tcp connection.
Finally handshake,client send pkt
(seq=client_seq+1,ack=primary_seq+1,flag=ACK).
Here,filter-rewriter can get primary_seq, and rewrite ack from primary_seq+1
to secondary_seq+1, recalculate checksum. So the secondary tcp connection
kept good.

When we send/recv packet.
client send pkt(seq=client_seq+1+data_len,ack=primary_seq+1,flag=ACK|PSH).
filter-rewriter rewrite ack and send to secondary guest.

primary guest response pkt
(seq=primary_seq+1,ack=client_seq+1+data_len,flag=ACK)
secondary guest response pkt
(seq=secondary_seq+1,ack=client_seq+1+data_len,flag=ACK)
we rewrite secondary guest seq from secondary_seq+1 to primary_seq+1.
So tcp connection kept good.

In code We use offset( = secondary_seq - primary_seq )
to rewrite seq or ack.
handle_primary_tcp_pkt: tcp_pkt->th_ack += offset;
handle_secondary_tcp_pkt: tcp_pkt->th_seq -= offset;

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen afe4612409 filter-rewriter: track connection and parse packet
We use net/colo.h to track connection and parse packet

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen e6eee8ab51 filter-rewriter: introduce filter-rewriter initialization
Filter-rewriter is a part of COLO project.
It will rewrite some of secondary packet to make
secondary guest's tcp connection established successfully.
In this module we will rewrite tcp packet's ack to the secondary
from primary,and rewrite tcp packet's seq to the primary from
secondary.

usage:

colo secondary:
-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
-object filter-rewriter,id=rew0,netdev=hn0,queue=all

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen f4b618360e colo-compare: add TCP, UDP, ICMP packet comparison
We add TCP,UDP,ICMP packet comparison to replace
IP packet comparison. This can increase the
accuracy of the package comparison.
Less checkpoint more efficiency.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen 0682e15b19 colo-compare: introduce packet comparison thread
If primary packet is same with secondary packet,
we will send primary packet and drop secondary
packet, otherwise notify COLO frame to do checkpoint.
If primary packet comes but secondary packet does not,
after REGULAR_PACKET_CHECK_MS milliseconds we set
the primary packet as old_packet,then do a checkpoint.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen b6540d403d colo-compare: track connection and enqueue packet
In this patch we use kernel jhash table to track
connection, and then enqueue net packet like this:

+ CompareState ++
|               |
+---------------+   +---------------+         +---------------+
|conn list      +--->conn           +--------->conn           |
+---------------+   +---------------+         +---------------+
|               |     |           |             |          |
+---------------+ +---v----+  +---v----+    +---v----+ +---v----+
                  |primary |  |secondary    |primary | |secondary
                  |packet  |  |packet  +    |packet  | |packet  +
                  +--------+  +--------+    +--------+ +--------+
                      |           |             |          |
                  +---v----+  +---v----+    +---v----+ +---v----+
                  |primary |  |secondary    |primary | |secondary
                  |packet  |  |packet  +    |packet  | |packet  +
                  +--------+  +--------+    +--------+ +--------+
                      |           |             |          |
                  +---v----+  +---v----+    +---v----+ +---v----+
                  |primary |  |secondary    |primary | |secondary
                  |packet  |  |packet  +    |packet  | |packet  +
                  +--------+  +--------+    +--------+ +--------+

We use conn_list to record connection info.
When we want to enqueue a packet, firstly get the
connection from connection_track_table. then push
the packet to g_queue(pri/sec) in it's own conn.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:21 +08:00
Zhang Chen ccf0426c09 Jhash: add linux kernel jhashtable in qemu
Jhash will be used by colo-compare and filter-rewriter
to save and lookup net connection info

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:21 +08:00
Zhang Chen 59509ec16b net/colo.c: add colo.c to define and handle packet
The net/colo.c is used by colo-compare and filter-rewriter.
this can share common data structure like net packet,
and other functions.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:21 +08:00
Zhang Chen 7dce4e6fd2 colo-compare: introduce colo compare initialization
This a COLO net ascii figure:

 Primary qemu                                                           Secondary qemu
+--------------------------------------------------------------+       +----------------------------------------------------------------+
| +----------------------------------------------------------+ |       |  +-----------------------------------------------------------+ |
| |                                                          | |       |  |                                                           | |
| |                        guest                             | |       |  |                        guest                              | |
| |                                                          | |       |  |                                                           | |
| +-------^--------------------------+-----------------------+ |       |  +---------------------+--------+----------------------------+ |
|         |                          |                         |       |                        ^        |                              |
|         |                          |                         |       |                        |        |                              |
|         |  +------------------------------------------------------+  |                        |        |                              |
|netfilter|  |                       |                         |    |  |   netfilter            |        |                              |
| +----------+ +----------------------------+                  |    |  |  +-----------------------------------------------------------+ |
| |       |  |                       |      |        out       |    |  |  |                     |        |  filter excute order       | |
| |       |  |          +-----------------------------+        |    |  |  |                     |        | +------------------->      | |
| |       |  |          |            |      |         |        |    |  |  |                     |        |   TCP                      | |
| | +-----+--+-+  +-----v----+ +-----v----+ |pri +----+----+sec|    |  |  | +------------+  +---+----+---v+rewriter++  +------------+ | |
| | |          |  |          | |          | |in  |         |in |    |  |  | |            |  |        |              |  |            | | |
| | |  filter  |  |  filter  | |  filter  +------>  colo   <------+ +-------->  filter   +--> adjust |   adjust     +-->   filter   | | |
| | |  mirror  |  |redirector| |redirector| |    | compare |   |  |    |  | | redirector |  | ack    |   seq        |  | redirector | | |
| | |          |  |          | |          | |    |         |   |  |    |  | |            |  |        |              |  |            | | |
| | +----^-----+  +----+-----+ +----------+ |    +---------+   |  |    |  | +------------+  +--------+--------------+  +---+--------+ | |
| |      |   tx        |   rx           rx  |                  |  |    |  |            tx                        all       |  rx      | |
| |      |             |                    |                  |  |    |  +-----------------------------------------------------------+ |
| |      |             +--------------+     |                  |  |    |                                                   |            |
| |      |   filter excute order      |     |                  |  |    |                                                   |            |
| |      |  +---------------->        |     |                  |  +--------------------------------------------------------+            |
| +-----------------------------------------+                  |       |                                                                |
|        |                            |                        |       |                                                                |
+--------------------------------------------------------------+       +----------------------------------------------------------------+
         |guest receive               | guest send
         |                            |
+--------+----------------------------v------------------------+
|                                                              |                          NOTE: filter direction is rx/tx/all
|                         tap                                  |                          rx:receive packets sent to the netdev
|                                                              |                          tx:receive packets sent by the netdev
+--------------------------------------------------------------+

In COLO-compare, we do packet comparing job.
Packets coming from the primary char indev will be sent to outdev.
Packets coming from the secondary char dev will be dropped after comparing.
colo-comapre need two input chardev and one output chardev:
primary_in=chardev1-id (source: primary send packet)
secondary_in=chardev2-id (source: secondary send packet)
outdev=chardev3-id

usage:

primary:
-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
-device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66
-chardev socket,id=mirror0,host=3.3.3.3,port=9003,server,nowait
-chardev socket,id=compare1,host=3.3.3.3,port=9004,server,nowait
-chardev socket,id=compare0,host=3.3.3.3,port=9001,server,nowait
-chardev socket,id=compare0-0,host=3.3.3.3,port=9001
-chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait
-chardev socket,id=compare_out0,host=3.3.3.3,port=9005
-object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0
-object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out
-object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0
-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0

secondary:
-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown
-device e1000,netdev=hn0,mac=52:a4:00:12:78:66
-chardev socket,id=red0,host=3.3.3.3,port=9003
-chardev socket,id=red1,host=3.3.3.3,port=9004
-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:21 +08:00
Shmulik Ladkani a4543b1b37 net: hmp_host_net_remove: Del the -net option of the removed host_net
Upon hmp_host_net_remove(), the appropriate -net client is deleted
(according to the given vlan_id and device id), as well as the
corresponsing hub port.

However, the relevant '-net' option that was added by former
hmp_host_net_add() call is still present in "net" options group.

This makes the following legit HMP sequence erroneous:

(qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1
(qemu) host_net_remove 1 n1
(qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1
Duplicate ID 'n1' for net

Fix, by deleting the stored '-net' option associated with the given
device id.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:21 +08:00
Marc-André Lureau 883e4f7624 Change net/socket.c to use socket_*() functions
Use socket_*() functions from include/qemu/sockets.h instead of
listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are
QAPI based and this patch  performs this api conversion since
everything will be using QAPI based sockets in the future. Also add a
helper function socket_address_to_string() in util/qemu-sockets.c
which returns the string representation of socket address. The task was
listed on http://wiki.qemu.org/BiteSizedTasks page.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-14 12:25:14 +02:00
Igor Mammedov 3b8c1761f0 qtail: clean up direct access to tqe_prev field
instead of accessing tqe_prev field dircetly outside
of queue.h use macros to check if element is in list
and make sure that afer element is removed from list
tqe_prev field could be used to do the same check.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469450832-84343-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:08:41 +02:00
Paolo Bonzini 616018352c Revert "Change net/socket.c to use socket_*() functions"
Since commit 7e8449594c, the socket connect code is blocking, because
calling socket_connect() without callback is blocking.  This reverts the
commit.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-30 16:28:46 +02:00
Marc-André Lureau 67f3280c06 slirp: fix segv when init failed
Since commit f6c2e66ae8, slirp uses an exit notifier to call
slirp_smb_cleanup. However, if init() failed, the notifier isn't added,
and removing it will fail:

==18447== Invalid write of size 8
==18447==    at 0x7EF2B5: notifier_remove (notify.c:32)
==18447==    by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661)
==18447==    by 0x6A2187: net_slirp_cleanup (slirp.c:134)
==18447==    by 0x69419D: qemu_cleanup_net_client (net.c:338)
==18447==    by 0x69445B: qemu_del_net_client (net.c:401)
==18447==    by 0x6A2B81: net_slirp_init (slirp.c:366)
==18447==    by 0x6A4241: net_init_slirp (slirp.c:865)
==18447==    by 0x695C6D: net_client_init1 (net.c:1051)
==18447==    by 0x695F6E: net_client_init (net.c:1108)
==18447==    by 0x696DBA: net_init_netdev (net.c:1498)
==18447==    by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116)
==18447==    by 0x696E60: net_init_clients (net.c:1516)
==18447==  Address 0x0 is not stack'd, malloc'd or (recently) free'd

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-08-22 15:20:32 +08:00
Zhang Chen e9e0a5854b net/net: properly handle multiple packets in net_fill_rstate()
When network is busy, we will receive multiple packets at one time. In
that situation, we should keep trying to do the receiving instead of
finalizing only the first packet.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-08-18 12:20:57 +08:00
Laurent Vivier e723b87103 trace-events: fix first line comment in trace-events
Documentation is docs/tracing.txt instead of docs/trace-events.txt.

find . -name trace-events -exec \
     sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \
     {} \;

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-12 10:36:01 +01:00
Marc-André Lureau c89804d674 vhost-user: wait until backend init is completed
The chardev waits for an initial connection before starting qemu, and
vhost-user should wait for the backend negotiation to be completed
before starting qemu too.

vhost-user is started in the net_vhost_user_event callback, which is
synchronously called after the socket is connected. Use a
VhostUserState.started flag to indicate vhost-user init completed
successfully and qemu can be started.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29 00:33:49 +03:00
Marc-André Lureau 1a5b68cee8 vhost-user: add get_vhost_net() assertions
Add a few assertions to be more explicit about the runtime behaviour
after the previous patch: get_vhost_net() is non-null after
net_vhost_user_init().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29 00:33:48 +03:00
Marc-André Lureau e6bcb1b617 vhost-user: keep vhost_net after a disconnection
Many code paths assume get_vhost_net() returns non-null.

Keep VhostUserState.vhost_net after a successful vhost_net_init(),
instead of freeing it in vhost_net_cleanup().

VhostUserState.vhost_net is thus freed before after being recreated or
on final vhost_user_cleanup() and there is no need to save the acked
features.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29 00:33:48 +03:00
Marc-André Lureau 9c7d18b3a5 vhost-user: disconnect on HUP
In some cases, qemu_chr_fe_read_all() on HUP event doesn't raise
CHR_EVENT_CLOSED because the read/recv function returns -1 on
disconnected peers (for example with tch_chr_recv, an ECONNRESET errno
overwritten as EIO).

It is simpler to explicitely disconnect on HUP, rising CHR_EVENT_CLOSED
if it wasn't disconnected already.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29 00:33:46 +03:00
Marc-André Lureau d9d261142d vhost-user: minor simplification
Shorten the code and make it more clear by using the specialized
function g_str_has_prefix().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29 00:33:46 +03:00
Peter Maydell 3b2e6798ff QAPI patches for 2016-07-19
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXjnLvAAoJEDhwtADrkYZTkd0P/iVsviq3WwxjmpbjyYDqgBYl
 2hj9XL8ZtYGwFIU9WZXdu16lXlXtZom9u8XzspXIvhy5McNeWDxYarbE2kByyjac
 rl4873YzIspVKPPFMl2LWsHwtq7LLGzFF+f+ofjHN81ZdM6qTwZBe00gxxY8281I
 6x1aQYkhOAmqJAlqqnEVk76WtdScs23mdbqmy1LzGD3ZBKvDa8IasogAKvZquNZX
 P16kYdq9QFqFJ30non9fWg9VQWtdryisseVhpSY/PXlrM4H+XPDK4hvegr3pjN8S
 yqtmKkPOuVWQyCfRz6UWBP0ncz3QN7iOiVLqb6TJgxJ8jFp3lbEEsXsCkvpSWjOU
 JDFOcGuiE1AVoZF8NxWQ3fdLiHt2jyCgY7iqgbNc1A3eT2H5IshIc7OF5QOU7MtP
 EYqk5bXiusUftuvZE5Mh0pXJ5AeOEOoXM+/dGRt3IRxPtqOWlW7/NM4YGgMD9XFg
 83i5OIjdOBa1HYvetfEl3oKYsu+2zGsSqz4AH3CDIWJ8aoWJ9RNId3JJWFf+jyFR
 S+l7wMyFYdzDL7VqUmIy8xrVgc0IQPYT0udcjdOciEej873roEVencQ07VnK2zN0
 aiAmAN/BQFO0HmmH4rBvTcLxF06+HnW0CwKii0mlAeisUFTQJEDmyg823Uc+MAGl
 4pGFqDUbnzsy8xK3HCCP
 =MhfL
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-07-19' into staging

QAPI patches for 2016-07-19

# gpg: Signature made Tue 19 Jul 2016 19:35:27 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2016-07-19:
  net: Use correct type for bool flag
  qapi: Change Netdev into a flat union
  block: Simplify drive-mirror
  block: Simplify block_set_io_throttle
  qapi: Implement boxed types for commands/events
  qapi: Plumb in 'boxed' to qapi generator lower levels
  qapi-event: Simplify visit of non-implicit data
  qapi: Drop useless gen_err_check()
  qapi: Add type.is_empty() helper
  qapi: Hide tag_name data member of variants
  qapi: Special case c_name() for empty type
  qapi: Require all branches of flat union enum to be covered
  net: use Netdev instead of NetClientOptions in client init
  qapi: change QmpInputVisitor to QSLIST
  qapi: change QmpOutputVisitor to QSLIST

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-20 14:34:08 +01:00
Eric Blake 0e55c381f6 net: Use correct type for bool flag
is_netdev is only used as a bool, so make it one.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-14-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19 20:18:27 +02:00
Eric Blake f394b2e20d qapi: Change Netdev into a flat union
This is a mostly-mechanical conversion that creates a new flat
union 'Netdev' QAPI type that covers all the branches of the
former 'NetClientOptions' simple union, where the branches are
now listed in a new 'NetClientDriver' enum rather than generated
from the simple union.  The existence of a flat union has no
change to the command line syntax accepted for new code, and
will make it possible for a future patch to switch the QMP
command to parse a boxed union for no change to valid QMP; but
it does have some ripple effect on the C code when dealing with
the new types.

While making the conversion, note that the 'NetLegacy' type
remains unchanged: it applies only to legacy command line options,
and will not be ported to QMP, so it should remain a wrapper
around a simple union; to avoid confusion, the type named
'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions'
in its place.  Then, in the C code, we convert from NetLegacy to
Netdev as soon as possible, so that the bulk of the net stack
only has to deal with one QAPI type, not two.  Note that since
the old legacy code always rejected 'hubport', we can just omit
that branch from the new 'NetLegacyOptions' simple union.

Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>:
Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com>
although the sed script in that patch no longer applies due to
other changes in the tree since then, and I also did some manual
cleanups (such as fixing whitespace to keep checkpatch happy).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Fixup from Eric squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19 20:18:02 +02:00
Kővágó, Zoltán cebea51057 net: use Netdev instead of NetClientOptions in client init
This way we no longer need NetClientOptions and can convert Netdev
into a flat union.

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <93ffdfed7054529635e6acb935150d95dc173a12.1441627176.git.DirtY.iCE.hu@gmail.com>

[rework net_client_init1() to pass Netdev by copying from NetdevLegacy,
rather than merging the two types - which means that we still need
NetClientOptions after all.  Rebase to qapi changes. The bulk of the
patch is mechanical, replacing 'opts' by 'netdev->opts', while
net_client_init1() takes care of converting between legacy and modern
types.]

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-2-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19 13:21:08 +02:00
Paolo Bonzini 091a6b2acf tap: fix memory leak on failure to create a multiqueue tap device
Reported by Coverity.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-18 16:16:56 +08:00
Paolo Bonzini 4555ca6816 net: fix incorrect argument to iov_to_buf
Coverity reports a "suspicious sizeof" which is indeed wrong.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-18 16:16:52 +08:00
Paolo Bonzini 2c5e564f4d net: fix incorrect access to pointer
This is not dereferencing the pointer, and instead checking only
the value of the pointer.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-18 16:16:49 +08:00
Peter Maydell 190c93c982 * SCSI scanner support
* fixes to qemu-char and net exit
 * FreeBSD fixes
 * Other small bugfixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJXhiZDAAoJEL/70l94x66DrGAH/10ZlIYugx6Ijn12qy3irmIC
 hbMY6HWjvPlk8ZpAcPa3UXNQvqhTwqhSMXRiwp9aNPlRUqrXnDXZapQunJveKSAn
 luLE8ISRKODz0W39qg6znyb4R1ipCGJWwjBCQmLWZuD7883JJ2DsykTATRx7yKQF
 qsq9r/DPBTfD3vnOCTbqp0GeB80UFleTNm+K7cct8M1+WzfiwKeVHk9CAKy0fkTH
 hS+YnV9UWYL6PR/w+uZ+2MfgH5er4X794+HaNbio0QJJbEZ2bsL4A3Prh7pUonN7
 qJoCbT4W79scrnWQ40RbWRXOMfUk4J7gIMEZYar8z6NmqnamNZgxbWj3dv6pO+k=
 =sz/L
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* SCSI scanner support
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes

# gpg: Signature made Wed 13 Jul 2016 12:30:11 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  hostmem: detect host backend memory is being used properly
  hostmem: fix QEMU crash by 'info memdev'
  char: do not use atexit cleanup handler
  net: do not use atexit for cleanup
  slirp: use exit notifier for slirp_smb_cleanup
  tap: use an exit notifier to call down_script
  util: Fix MIN_NON_ZERO
  qemu-sockets: use qapi_free_SocketAddress in cleanup
  disas: avoid including everything in headers compiled from C++
  json-streamer: fix double-free on exiting during a parse
  main-loop: check return value before using pointer
  Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD.
  scsi-bus: Use longer sense buffer with scanners
  scsi-bus: Add SCSI scanner support

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-14 13:44:06 +01:00
Paolo Bonzini f6c2e66ae8 slirp: use exit notifier for slirp_smb_cleanup
We would like to move back net_cleanup() at the end of main function,
like it used to be until f30dbae63a, but minimum
cleanup is needed regardless at exit() time for slirp's SMB
functionality.  Use an exit notifier to call slirp_smb_cleanup.
If net_cleanup() is called first, then remove the exit notifier as it
will become a dangling pointer otherwise.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-13 13:30:00 +02:00
Marc-André Lureau 9e32ff3299 tap: use an exit notifier to call down_script
We would like to move back net_cleanup() at the end of main function,
like it used to be until f30dbae63a, but minimum
tap cleanup is necessary regarless at exit() time. Use an exit notifier
to call TAP down_script. If net_cleanup() is called first, then remove
the exit notifier as it will become a dangling pointer otherwise.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20160711144847.16651-1-marcandre.lureau@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-13 13:29:56 +02:00
Markus Armbruster 175de52487 Clean up decorations and whitespace around header guards
Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:20:46 +02:00
Markus Armbruster 121d07125b Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.  Offenders found with
scripts/clean-header-guards.pl -vn.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Jason Wang 69e87b3268 tap: vhost busy polling support
This patch add the capability of basic vhost net busy polling which is
supported by recent kernel. User could configure the maximum number of
us that could be spent on busy polling through a new property of tap
"poll-us".

Cc: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-07 14:29:04 +08:00
Eric Blake 3b098d5697 qapi: Add new visit_complete() function
Making each output visitor provide its own output collection
function was the only remaining reason for exposing visitor
sub-types to the rest of the code base.  Add a polymorphic
visit_complete() function which is a no-op for input visitors,
and which populates an opaque pointer for output visitors.  For
maximum type-safety, also add a parameter to the output visitor
constructors with a type-correct version of the output pointer,
and assert that the two uses match.

This approach was considered superior to either passing the
output parameter only during construction (action at a distance
during visit_free() feels awkward) or only during visit_complete()
(defeating type safety makes it easier to use incorrectly).

Most callers were function-local, and therefore a mechanical
conversion; the testsuite was a bit trickier, but the previous
cleanup patch minimized the churn here.

The visit_complete() function may be called at most once; doing
so lets us use transfer semantics rather than duplication or
ref-count semantics to get the just-built output back to the
caller, even though it means our behavior is not idempotent.

Generated code is simplified as follows for events:

|@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP
|     QDict *qmp;
|     Error *err = NULL;
|     QMPEventFuncEmit emit;
|-    QmpOutputVisitor *qov;
|+    QObject *obj;
|     Visitor *v;
|     q_obj_ACPI_DEVICE_OST_arg param = {
|         info
|@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP
|
|     qmp = qmp_event_build_dict("ACPI_DEVICE_OST");
|
|-    qov = qmp_output_visitor_new();
|-    v = qmp_output_get_visitor(qov);
|+    v = qmp_output_visitor_new(&obj);
|
|     visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err);
|     if (err) {
|@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP
|         goto out;
|     }
|
|-    qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov));
|+    visit_complete(v, &obj);
|+    qdict_put_obj(qmp, "data", obj);
|     emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err);

and for commands:

| {
|     Error *err = NULL;
|-    QmpOutputVisitor *qov = qmp_output_visitor_new();
|     Visitor *v;
|
|-    v = qmp_output_get_visitor(qov);
|+    v = qmp_output_visitor_new(ret_out);
|     visit_type_AddfdInfo(v, "unused", &ret_in, &err);
|-    if (err) {
|-        goto out;
|+    if (!err) {
|+        visit_complete(v, ret_out);
|     }
|-    *ret_out = qmp_output_get_qobject(qov);
|-
|-out:
|     error_propagate(errp, err);

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06 10:52:04 +02:00
Eric Blake e7ca565629 string-output-visitor: Favor new visit_free() function
Now that we have a polymorphic visit_free(), we no longer need
string_output_visitor_cleanup(); however, we still need to
expose the subtype for string_output_get_string().

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-9-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06 10:52:04 +02:00
Eric Blake 09204eac9b opts-visitor: Favor new visit_free() function
Now that we have a polymorphic visit_free(), we no longer need
opts_visitor_cleanup(); which in turn means we no longer need
to return a subtype from opts_visitor_new() nor a public upcast
function.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06 10:52:04 +02:00
Peter Maydell 1ec20c2a3a * serial port fixes (Paolo)
* Q35 modeling improvements (Paolo, Vasily)
 * chardev cleanup improvements (Marc-André)
 * iscsi bugfix (Peter L.)
 * cpu_exec patch from multi-arch patches (Peter C.)
 * pci-assign tweak (Lin Ma)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJXc+GeAAoJEL/70l94x66DtIAH/3+eUBqSxVJ3SMUxJep2Op07
 lIWqw1GHAdw1gWQDG4HzokKWrVVp/+NFYQjRFcNMfF8L+/Xm6hHAYc7Y4DMkDxSw
 zHX2BT93gPcaFJRz3Md8n2anzFHaWePx7LucPjaoas2OzrbVKXC8JT6n3GGnKQzZ
 0CxDoyW4keI4ZVAOy9SOKsLPxdSvG8uLvaZU98l/YS/TuiGzpv8IWcdHR+k1hua+
 FIenzj7jD9+JFoLEUWkU0pYs33J6yYKPiZn7HgGL9RNWKPFR88+CtMdYXgfOPo7z
 i05L9RTmL4SpahmStPN2r72MC0T0ub0czk/+qxBNms4r/2gBwaSyldmcTfAXM9o=
 =DA8v
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* serial port fixes (Paolo)
* Q35 modeling improvements (Paolo, Vasily)
* chardev cleanup improvements (Marc-André)
* iscsi bugfix (Peter L.)
* cpu_exec patch from multi-arch patches (Peter C.)
* pci-assign tweak (Lin Ma)

# gpg: Signature made Wed 29 Jun 2016 15:56:30 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (35 commits)
  socket: unlink unix socket on remove
  socket: add listen feature
  char: clean up remaining chardevs when leaving
  vhost-user: disable chardev handlers on close
  vhost-user-test: fix g_cond_wait_until compat implementation
  vl: smp_parse: fix regression
  ich9: implement SCI_IRQ_SEL register
  ich9: implement ACPI_EN register
  serial: reinstate watch after migration
  serial: remove watch on reset
  char: change qemu_chr_fe_add_watch to return unsigned
  serial: separate serial_xmit and serial_watch_cb
  serial: simplify tsr_retry reset
  serial: make tsr_retry unsigned
  iscsi: fix assertion in is_sector_request_lun_aligned
  target-*: Don't redefine cpu_exec()
  pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.c
  vnc: generalize "VNC server running on ..." message
  scsi: esp: fix migration
  MC146818 RTC: add GPIO access to output IRQ
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-29 19:14:48 +01:00
Paolo Bonzini 25f0d2aa5e vhost-user: disable chardev handlers on close
This otherwise causes a use-after-free if network backend cleanup
is performed before character device cleanup.

Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29 16:49:40 +02:00
Paolo Bonzini 6f1de6b70d char: change qemu_chr_fe_add_watch to return unsigned
g_source_attach can return any value between 1 and UINT_MAX if you let
QEMU run long enough.  However, qemu_chr_fe_add_watch can also return
a negative errno value when the device is disconnected or does not
support chr_add_watch.  Change it to return zero to avoid overloading
these values.

Fix the cadence_uart which asserts in this case (easily obtained with
"-serial pty").

Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29 14:03:47 +02:00
Ashijeet Acharya 7e8449594c Change net/socket.c to use socket_*() functions
Use socket_*() functions from include/qemu/sockets.h instead of
listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are
QAPI based and this patch  performs this api conversion since
everything will be using QAPI based sockets in the future. Also add a
helper function socket_address_to_string() in util/qemu-sockets.c
which returns the string representation of socket address. Thetask was
listed on http://wiki.qemu.org/BiteSizedTasks page.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-28 10:13:57 +08:00
Peter Lieven ca1ee3d6b5 net: fix qemu_announce_self not emitting packets
commit fefe2a78 accidently dropped the code path for injecting
raw packets. This feature is needed for sending gratuitous ARPs
after an incoming migration has completed. The result is increased
network downtime for vservers where the network card is not virtio-net
with the VIRTIO_NET_F_GUEST_ANNOUNCE feature.

Fixes: fefe2a78ab
Cc: qemu-stable@nongnu.org
Cc: hongyang.yang@easystack.cn
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-28 10:13:57 +08:00
Daniel P. Berrange f3b0163b18 trace: split out trace events for net/ directory
Move all trace-events for files in the net/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-36-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:17 +01:00
Peter Maydell 7263a903c3 pc, pci, virtio: new features, cleanups, fixes
Beginning of reconnect support for vhost-user.
 Misc cleanups and fixes.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXY0Q3AAoJECgfDbjSjVRpkVcH/2gTHRE9yUoWe6ROvPV67BKx
 8Iy9GzJ3BMO3RolVZEA5KXIevn5TG+pV274BZEuXMD3AL/molv279p0o/gvBYoqq
 V0jNH2MO+MV6D9OzhUXcgWSejvybF5W07ojPDU/hlgtFXPZFbJDyt95MWaLiilOg
 cCtTuRqgrrRaypcnnk/CIDbC+Ek2kAYdgQHQbfj9ihle3TWO8R0bSXnFqSaqCIkM
 4slMlv8y82fODeiO83nkpfAP1NCnfnRC8r8Gv7hbEUTlZQntavx5DuYdiIx6nsJE
 W0g+Gpe1o0+jRuMnucGIUZvqzZ0e/I0wZuV16Nsfx+Rbd5+4CzTxZda5Qb05v7I=
 =BHbJ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc, pci, virtio: new features, cleanups, fixes

Beginning of reconnect support for vhost-user.
Misc cleanups and fixes.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 17 Jun 2016 01:28:39 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  MAINTAINERS: add Marcel to PCI
  msi_init: change return value to 0 on success
  fix some coding style problems
  pci core: assert ENOSPC when add capability
  test: start vhost-user reconnect test
  tests: append i386 tests
  vhost-net: save & restore vring enable state
  vhost-net: save & restore vhost-user acked features
  vhost-net: do not crash if backend is not present
  vhost-user: disconnect on start failure
  qemu-char: add qemu_chr_disconnect to close a fd accepted by listen fd
  tests/vhost-user-bridge: workaround stale vring base
  tests/vhost-user-bridge: add client mode
  vhost-user: add ability to know vhost-user backend disconnection
  pci: fix pci_requester_id()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Conflicts:
	tests/Makefile.include
2016-06-17 11:25:46 +01:00
Marc-André Lureau a463215b08 vhost-net: save & restore vhost-user acked features
The initial vhost-user connection sets the features to be negotiated
with the driver. Renegotiation isn't possible without device reset.

To handle reconnection of vhost-user backend, ensure the same set of
features are provided, and reuse already acked features.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17 03:28:03 +03:00
Marc-André Lureau 0d572afd52 vhost-user: disconnect on start failure
If the backend failed to start (for example feature negociation failed),
do not exit, but disconnect the char device instead. Slightly more
robust for reconnect case.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17 03:28:02 +03:00
Tetsuya Mukawa a6553598be vhost-user: add ability to know vhost-user backend disconnection
Current QEMU cannot detect vhost-user backend disconnection. The
patch adds ability to know it.
To know disconnection, add watcher to detect G_IO_HUP event. When
G_IO_HUP event is detected, the disconnected socket will be read
to cause a CHR_EVENT_CLOSED.

Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17 03:28:02 +03:00
Paolo Bonzini 02d0e09503 os-posix: include sys/mman.h
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h.  Include it in
sysemu/os-posix.h and remove it from everywhere else.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16 18:39:03 +02:00
Jean-Christophe Dubois ade6bad111 net: handle optional VLAN header in checksum computation.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:46 +08:00
Jean-Christophe Dubois 50dbce6538 net: improve UDP/TCP checksum computation.
* based on Eth, UDP, TCP struct present in eth.h instead of hardcoded
   indexes and sizes.
 * based on various macros present in eth.h.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:30 +08:00
Dmitry Fleytman eb700029c7 net_pkt: Extend packet abstraction as required by e1000e functionality
This patch extends the TX/RX packet abstractions with features that will
be used by the e1000e device implementation.

Changes are:

  1. Support iovec lists for RX buffers
  2. Deeper RX packets parsing
  3. Loopback option for TX packets
  4. Extended VLAN headers handling
  5. RSS processing for RX packets

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:28 +08:00
Zhang Chen 16a3df403b net/net: Add SocketReadState for reuse codes
This function is from net/socket.c, move it to net.c and net.h.
Add SocketReadState to make others reuse net_fill_rstate().
suggestion from jason.

v4:
 - move 'rs->finalize = finalize' to rs_init()

v3:
 - remove SocketReadState init callback
 - put finalize callback to net_fill_rstate()

v2:
 - rename ReadState to SocketReadState
 - add SocketReadState init and finalize callback

v1:
 - init patch

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-01 09:25:29 +08:00
Eduardo Habkost d30300f771 net: vl: Move default_net to vl.c
All handling of defaults (default_* variables) is inside vl.c,
move default_net there too, so we can more easily refactor that
code later.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-01 09:25:29 +08:00
Zhou Jie 11196e95f0 net/tap: Allocating Large sized arrays to heap
net_init_tap has a huge stack usage of 8192 bytes approx.
Moving large arrays to heap to reduce stack usage.

Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-05-25 15:46:07 +08:00
zhanghailiang e0a039e50d filter-buffer: fix segfault when starting qemu with status=off property
After commit 338d3f, we support 'status' property for filter object.
The segfault can be triggered by starting qemu with 'status=off' property
for filter, when the s->incoming_queue is NULL, we reference it directly
in qemu_net_queue_flush() which was called in status_changed() callback
function.

We shouldn't trigger status_changed() before the filter was initialized,
We can check the value of 'nf->netdev' to confirm if the filter is
initialized or not, so let's check its value before calling
status_changed().

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-06 09:52:07 +08:00
Paolo Bonzini 044d65525f net: fix OptsVisitor memory leak
Fixes 96a1616("qapi-dealloc: Reduce use outside of generated code")
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-06 09:52:07 +08:00
Pooja Dhannawat 74044c8ffc net: Allocating Large sized arrays to heap
nc_sendv_compat has a huge stack usage of 69680 bytes approx.
Moving large arrays to heap to reduce stack usage.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Pooja Dhannawat <dhannawatpooja1@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-06 09:52:07 +08:00
Isaac Lozano a1555559ab util: Improved qemu_hexmap() to include an ascii dump of the buffer
qemu_hexdump() in util/hexdump.c has been changed to give also include a
ascii dump of the buffer. Also, calls to hex_dump() in net/net.c have
been replaced with calls to qemu_hexdump(). This takes care of two misc
BiteSized Tasks.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Isaac Lozano <109lozanoi@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-06 09:52:07 +08:00
Daniel P. Berrange e31f045187 net: fix missing include of qapi/error.h in netmap.c
The netmap.c file fails to build on FreeBSD with

net/netmap.c:95:9: warning: implicit declaration of function 'error_setg_errno' is invalid in C99 [-Wimplicit-function-declaration]
     error_setg_errno(errp, errno, "Failed to nm_open() %s",
     ^
net/netmap.c:432:9: warning: implicit declaration of function 'error_propagate' is invalid in C99 [-Wimplicit-function-declaration]
     error_propagate(errp, err);
     ^

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1459429690-6144-1-git-send-email-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-04 15:01:14 +01:00
Samuel Thibault 0b11c03662 slirp: Allow disabling IPv4 or IPv6
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-04-01 17:51:55 +02:00
Samuel Thibault 891a2bb58c Fix ipv6 options according to documentation
The options names were fixed in the qapi layer, but not in the command-line
options.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-03-31 01:08:29 +02:00
Zhang Chen d46f75b2e9 net/filter-mirror: implement filter-redirector
Filter-redirector is a netfilter plugin.
It gives qemu the ability to redirect net packet.
redirector can redirect filter's net packet to outdev.
and redirect indev's packet to filter.

                      filter
                        +
            redirector  |
               +--------------+
               |        |     |
  indev +-----------+   +---------->  outdev
               |    |         |
               +--------------+
                    |
                    v
                  filter

usage:

-netdev user,id=hn0
-chardev socket,id=s0,host=ip_primary,port=X,server,nowait
-chardev socket,id=s1,host=ip_primary,port=Y,server,nowait
-filter-redirector,id=r0,netdev=hn0,queue=tx/rx/all,indev=s0,outdev=s1

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-30 08:57:28 +08:00
Zhang Chen ba8940dd86 net/filter-mirror: Change filter_mirror_send interface
Change filter_mirror_send interface to make it easier
to used by other filter

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-30 08:57:23 +08:00
Zhang Chen f6d3afb51f net/filter-mirror:Add filter-mirror
Filter-mirror is a netfilter plugin.
It gives qemu the ability to mirror
packets to a chardev.

usage:

-netdev tap,id=hn0
-chardev socket,id=mirror0,host=ip_primary,port=X,server,nowait
-filter-mirror,id=m0,netdev=hn0,queue=tx/rx/all,outdev=mirror0

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-30 08:54:29 +08:00
Peter Maydell 5b8e6b4cc2 slirp updates
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJW+bs1AAoJEOPlHOj7ay8dZd4P/1LapRGCErASZGdNWxVGxhTR
 jgM1eR7K2vjb2d4+nw5QVdI1jVnO2/hodbrIZVd0lxZtzyWzPSaa7Izc9Exl82is
 Zxqo4gvocDqNH2/9jEkruq5BtocCLTe3d2MJFqqr8kAaGD64qRATDO5ImItKKHZZ
 IDmKK4f/MpJTx1rGCcxqIjTH3eX+trrg78WH4ZMJQYS+s3+BiE1M1Wlj1xja6uji
 rSmXXOmF8VrO5VrafYXmAFnwftPLNoSRMoXYzB5MUAwQ8uHizrj6hbViUCOeo/y8
 1X9A/oOA4X0XiOWSIq/9FKGc8/tI0znCw1FN+axyyTvtqQ/NHgtDeibi6pM1IfV2
 sSsMveEX4y87UrTt+8U3ub3sSCXbkX56MUw+6xGrfSyrTgwr5QVJi9f9Ozsz2oBW
 rea4joPTXuu2TkXKMJIqF/Tsin+0eJ8wJIxIONISSi+QijyQGcxXyPsghvflTP28
 LIZJFdYeQjqm8vFpm1l3jXISrS9DoFIzRek+alJc+K4VQjONwrmuGTBxS82+oXiL
 c68YN5B48U5vO+XJNtlni7lJFtAx/ap54yWuPAvsUT4FXkaNA/gpeziVe7EXgiZ5
 oQfkOLkwNvEm7ej3ZY/Tti+3LRVFFd9yo339D5priFExccAS6V5qD547ISqsjCqY
 tq+vuAiwhfws/4kbr5Ao
 =+TFR
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

slirp updates

# gpg: Signature made Tue 29 Mar 2016 00:16:05 BST using RSA key ID FB6B2F1D
# gpg: Good signature from "Samuel Thibault <samuel.thibault@gnu.org>"
# gpg:                 aka "Samuel Thibault <sthibault@debian.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@inria.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@labri.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@ens-lyon.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82  304B D017 8C76 7D06 9EE6
#      Subkey fingerprint: F632 74CD C630 0873 CB3D  29D9 E3E5 1CE8 FB6B 2F1D

* remotes/thibault/tags/samuel-thibault:
  Rework ipv6 options
  Use C99 flexible array instead of 1-byte trailing array
  Avoid embedding struct mbuf in other structures
  slirp: send icmp6 errors when UDP send failed
  slirp: Fix memory leak on small incoming ipv4 packet

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-29 18:25:27 +01:00
Samuel Thibault d8eb386495 Rework ipv6 options
Rename the recently-added ip6-foo options into ipv6-foo options, to make
them coherent with other ipv6 options.

Also rework the documentation.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-03-29 01:15:43 +02:00
Veronia Bahaa f348b6d1a5 util: move declarations out of qemu-common.h
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)

Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Markus Armbruster da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Eric Blake 32bafa8fdd qapi: Don't special-case simple union wrappers
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type().  But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:

| struct q_obj_ImageInfoSpecificQCow2_wrapper {
|     ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
|     ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
|     ImageInfoSpecificKind type;
|     union { /* union tag is @type */
|         void *data;
|-        ImageInfoSpecificQCow2 *qcow2;
|-        ImageInfoSpecificVmdk *vmdk;
|+        q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+        q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
|     } u;
| };

Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation).  Using the implicit type
also lets us get rid of the simple_union_type() hack.

Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access.  The generated
qapi-visit.c code is also affected by the layout change:

|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
|     }
|     switch (obj->type) {
|     case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|-        visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+        visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
|         break;
|     case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|-        visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+        visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
|         break;
|     default:
|         abort();

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-18 10:29:26 +01:00
Peter Maydell a6cdb77f81 slirp: Adding IPv6 support to Qemu -net user mode
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJW6DLrAAoJEOPlHOj7ay8dav8QAIbciLu4X3pFo6S9V6ScDvnq
 DtZXb2EFvjhref6eQhkBqdpkS4uFGOC4GfWo5k4h5V1Lkn17xEx8zvJJBllMFQEA
 pFCkpc+ejKrlNI705gWXglIYiVagiddMDTOJ/yg2/UriEdFhoRqf1giDigLnvitx
 /RdRQGX8UDd3E3DKT7tJiZdRxiPygMuk0lvi3RDUAUNufE/Z5XX5j6WpGffpV5ju
 gDzFIyC2+86mQKLuXobX3Fhyax78Ws7Nib/NJx4bw9itOacfAZFn76iI78Cr5k+4
 gFu4RHoXoYFqFDLnCxoycbGUZTTmiwn4voqbVo9/hfjsiEc8+SEeAULDemcc0wz3
 /l8EYAKa72baB6AjReQwGSMiOdV6GQYI3T5pZwXwlHsiiwijoUk8rGPT6HQqfdNF
 VOtD7bQkqz2W4QElwmvGwGVe1Dxea2Avb6w/holCPz8Y8TVmtGpQ2lMY78qYrA8t
 lH2qhydIKgklZijVk3Jti1Wnx69NZsyFFWep0EZZDuZDUfoq5rENqT/Xsfm2x6pp
 foRrdmR52KjhwkVi6/VhJe8aDBaoJDZw+8AaFf3qXmowzcav63tsi2f+GtquwUFf
 tcbC6dTGaAod7Pdo4WzZDIhiBVT4JnygksNOb0Fn4lBMDegm0WHDhFlxTKV5+pbQ
 rKgLlQmvYW2JwOWXjkfD
 =VX4A
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

slirp: Adding IPv6 support to Qemu -net user mode

# gpg: Signature made Tue 15 Mar 2016 16:06:03 GMT using RSA key ID FB6B2F1D
# gpg: Good signature from "Samuel Thibault <samuel.thibault@gnu.org>"
# gpg:                 aka "Samuel Thibault <sthibault@debian.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@inria.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@labri.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@ens-lyon.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82  304B D017 8C76 7D06 9EE6
#      Subkey fingerprint: F632 74CD C630 0873 CB3D  29D9 E3E5 1CE8 FB6B 2F1D

* remotes/thibault/tags/samuel-thibault:
  slirp: Add IPv6 support to the TFTP code
  qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses
  slirp: Adding IPv6 address for DNS relay
  slirp: Handle IPv6 in TCP functions
  slirp: Reindent after refactoring
  slirp: Generalizing and neutralizing various TCP functions before adding IPv6 stuff
  slirp: Factorizing tcpiphdr structure with an union
  slirp: Adding IPv6 UDP support
  slirp: Adding ICMPv6 error sending
  slirp: Fix ICMP error sending
  slirp: Adding IPv6, ICMPv6 Echo and NDP autoconfiguration

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-15 17:09:52 +00:00
Peter Maydell a58a4cb187 vhost, virtio, pci, pc, acpi
nvdimm work
 sparse cpu id rework
 ipmi enhancements
 fixes all over the place
 pxb option to tweak chassis number
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJW6B0mAAoJECgfDbjSjVRpCtMH/2xSrYsLGAM3tQZtcAlpoof/
 LNjN0GxTMXWtbDfGLKQMkexAmrDtBOqXTNfPpDaeycvktcMJ4wUCqX8nWC+cNwl+
 3Uu4yiR9J5qjB4ANRlHnW45aL9rq7Qv0BBMQvc0AxpKMqZ9sf4okd2a4ZprTbhHq
 /q/JnWKa/a4CGAZrfwlonobtT/YvF+cbq6gQOxUWMaemptEZDhYaH8PMtw0Ituw1
 HWsI5lkhy+bHC2FeoqKt+p3ypuIXfnbg1rJyAiyVzgwz4289aMoh6nBll6WFRGpI
 vEligkFv4GBjNlYloUaGLlJxz3RE/7uPGER2lSH0OYTSVNc1zUbvbmv/7DIucSA=
 =0EjS
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost, virtio, pci, pc, acpi

nvdimm work
sparse cpu id rework
ipmi enhancements
fixes all over the place
pxb option to tweak chassis number

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 15 Mar 2016 14:33:10 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (51 commits)
  hw/acpi: fix GSI links UID
  ipmi: add some local variables in ipmi_sdr_init
  ipmi: remove the need of an ending record in the SDR table
  ipmi: use a function to initialize the SDR table
  ipmi: add a realize function to the device class
  ipmi: add rsp_buffer_set_error() helper
  ipmi: remove IPMI_CHECK_RESERVATION() macro
  ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpers
  ipmi: remove IPMI_CHECK_CMD_LEN() macro
  MAINTAINERS: machine core
  MAINTAINERS: Add an entry for virtio header files
  pc: acpi: clarify why possible LAPIC entries must be present in MADT
  pc: acpi: drop cpu->found_cpus bitmap
  pc: acpi: create Processor and Notify objects only for valid lapics
  pc: acpi: create MADT.lapic entries only for valid lapics
  pc: acpi: SRAT: create only valid processor lapic entries
  pc: acpi: cleanup qdev_get_machine() calls
  machine: introduce MachineClass.possible_cpu_arch_ids() hook
  pc: init pcms->apic_id_limit once and use it throughout pc.c
  pc: acpi: remove NOP assignment
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-15 16:43:48 +00:00
Yann Bordenave 7aac531ef2 qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses
This patch adds parameters to manage some new options in the qemu -net
command.
Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in
argument to the qemu command.
Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3.

Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:25 +01:00
Marc-André Lureau b7fcb3603c vhost-user: remove useless is_server field
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11 16:59:12 +02:00
Marc-André Lureau c1bf3531ae vhost-user: fix use after free
"name" is freed after visiting options, instead use the first NetClientState
name. Adds a few assert() for clarifying and checking some impossible states.

READ of size 1 at 0x602000000990 thread T0
    #0 0x7f6b251c570c  (/lib64/libasan.so.2+0x4770c)
    #1 0x5566dc380600 in qemu_find_net_clients_except net/net.c:824
    #2 0x5566dc39bac7 in net_vhost_user_event net/vhost-user.c:193
    #3 0x5566dbee862a in qemu_chr_be_event /home/elmarco/src/qemu/qemu-char.c:201
    #4 0x5566dbef2890 in tcp_chr_disconnect /home/elmarco/src/qemu/qemu-char.c:2790
    #5 0x5566dbef2d0b in tcp_chr_sync_read /home/elmarco/src/qemu/qemu-char.c:2835
    #6 0x5566dbee8a99 in qemu_chr_fe_read_all /home/elmarco/src/qemu/qemu-char.c:295
    #7 0x5566dc39b964 in net_vhost_user_watch net/vhost-user.c:180
    #8 0x5566dc5a06c7 in qio_channel_fd_source_dispatch io/channel-watch.c:70
    #9 0x7f6b1aa2ab87 in g_main_dispatch /home/elmarco/src/gnome/glib/glib/gmain.c:3154
    #10 0x7f6b1aa2b9cb in g_main_context_dispatch /home/elmarco/src/gnome/glib/glib/gmain.c:3769
    #11 0x5566dc475ed4 in glib_pollfds_poll /home/elmarco/src/qemu/main-loop.c:212
    #12 0x5566dc476029 in os_host_main_loop_wait /home/elmarco/src/qemu/main-loop.c:257
    #13 0x5566dc476165 in main_loop_wait /home/elmarco/src/qemu/main-loop.c:505
    #14 0x5566dbf08d31 in main_loop /home/elmarco/src/qemu/vl.c:1932
    #15 0x5566dbf16783 in main /home/elmarco/src/qemu/vl.c:4646
    #16 0x7f6b180bb57f in __libc_start_main (/lib64/libc.so.6+0x2057f)
    #17 0x5566dbbf5348 in _start (/home/elmarco/src/qemu/x86_64-softmmu/qemu-system-x86_64+0x3f9348)

0x602000000990 is located 0 bytes inside of 5-byte region [0x602000000990,0x602000000995)
freed by thread T0 here:
    #0 0x7f6b2521666a in __interceptor_free (/lib64/libasan.so.2+0x9866a)
    #1 0x7f6b1aa332a4 in g_free /home/elmarco/src/gnome/glib/glib/gmem.c:189
    #2 0x5566dc5f416f in qapi_dealloc_type_str qapi/qapi-dealloc-visitor.c:134
    #3 0x5566dc5f3268 in visit_type_str qapi/qapi-visit-core.c:196
    #4 0x5566dc5ced58 in visit_type_Netdev_fields /home/elmarco/src/qemu/qapi-visit.c:5936
    #5 0x5566dc5cef71 in visit_type_Netdev /home/elmarco/src/qemu/qapi-visit.c:5960
    #6 0x5566dc381a8d in net_visit net/net.c:1049
    #7 0x5566dc381c37 in net_client_init net/net.c:1076
    #8 0x5566dc3839e2 in net_init_netdev net/net.c:1473
    #9 0x5566dc63cc0a in qemu_opts_foreach util/qemu-option.c:1112
    #10 0x5566dc383b36 in net_init_clients net/net.c:1499
    #11 0x5566dbf15d86 in main /home/elmarco/src/qemu/vl.c:4397
    #12 0x7f6b180bb57f in __libc_start_main (/lib64/libc.so.6+0x2057f)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11 16:59:12 +02:00
Ilya Maximets fff4e48ed5 vhost-user: verify that number of queues is less than MAX_QUEUE_NUM
Fix QEMU crash when -netdev vhost-user,queues=n is passed with number
of queues greater than MAX_QUEUE_NUM.

Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
2016-03-11 14:55:15 +02:00
Daniel P. Berrange b16a44e13e osdep: remove use of socket_error() from all code
Now that QEMU wraps the Win32 sockets methods to automatically
set errno upon failure, there is no reason for callers to use
the socket_error() method. They can rely on accessing errno
even on Win32. Remove all use of socket_error() from general
code, leaving it as a static method in oslib-win32.c only.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-10 17:19:34 +00:00
Prasad J Pandit 362786f14a net: check packet payload length
While computing IP checksum, 'net_checksum_calculate' reads
payload length from the packet. It could exceed the given 'data'
buffer size. Add a check to avoid it.

Reported-by: Liu Ling <liuling-it@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08 15:34:18 +08:00
zhanghailiang f1b2bc601a filter-buffer: Add status_changed callback processing
While the status of filter-buffer changing from 'on' to 'off',
it need to release all the buffered packets, and delete the related
timer, while switch from 'off' to 'on', it need to resume the release
packets timer.

Here, we extract the process of setup timer into a new helper,
which will be used in the new status_changed callback.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08 15:34:18 +08:00
zhanghailiang 338d3f415e filter: Add 'status' property for filter object
With this property, users can control if this filter is 'on'
or 'off'. The default behavior for filter is 'on'.

For some types of filters, they may need to react to status changing,
So here, we introduced status changing callback/notifier for filter class.

We will skip the disabled ('off') filter when delivering packets in net layer.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08 15:34:18 +08:00
Vincenzo Maffione 9fbad2ca36 net: netmap: probe netmap interface for virtio-net header
Previous implementation of has_ufo, has_vnet_hdr, has_vnet_hdr_len, etc.
did not really probe for virtio-net header support for the netmap
interface attached to the backend. These callbacks were correct for
VALE ports, but incorrect for hardware NICs, pipes, monitors, etc.

This patch fixes the implementation to work properly with all kinds
of netmap ports.

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08 15:34:18 +08:00
Paolo Bonzini 3a2d44f6dd net: simplify net_init_tap_one logic
net_init_tap_one receives in vhostfdname a fd name from vhostfd= or
vhostfds=, or NULL if there is no vhostfd=/vhostfds=.  It is simpler
to just check vhostfdname, than it is to check for vhostfd= or
vhostfds=.  This also calms down Coverity, which otherwise thinks
that monitor_fd_param could dereference a NULL vhostfdname.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08 15:34:09 +08:00
Jason Wang 5dd2d45e34 net: filter: correctly remove filter from the list during finalization
Qemu may crash when we want to add two filters on the same netdev but
the initialization of second fails (e.g missing parameters):

./qemu-system-x86_64 -netdev user,id=un0 \
 -object filter-buffer,id=f0,netdev=un0,interval=10 \
 -object filter-buffer,id=f1,netdev=un0
Segmentation fault (core dumped)

This is because we don't check whether or not the filter was in the
list of netdev. This patch fixes this.

Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08 15:34:09 +08:00
Eric Blake 96a1616c85 qapi-dealloc: Reduce use outside of generated code
No need to roll our own use of the dealloc visitors when we can
just directly use the qapi_free_FOO() functions that do what we
want in one line.

In net.c, inline net_visit() into its remaining lone caller.

After this patch, test-visitor-serialization.c is the only
non-generated file that needs to use a dealloc visitor, because
it is testing low level aspects of the visitor interface.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1456262075-3311-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-04 17:16:32 +01:00
Peter Maydell 30456d5ba3 all: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-23 12:43:05 +00:00
Eric Blake d7bce9999d qom: Swap 'name' next to visitor in ObjectPropertyAccessor
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.

Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).

    @ rule1 @
    identifier fn;
    typedef Object, Visitor, Error;
    identifier obj, v, opaque, name, errp;
    @@
     void fn
    - (Object *obj, Visitor *v, void *opaque, const char *name,
    + (Object *obj, Visitor *v, const char *name, void *opaque,
       Error **errp) { ... }

    @@
    identifier rule1.fn;
    expression obj, v, opaque, name, errp;
    @@
     fn(obj, v,
    -   opaque, name,
    +   name, opaque,
        errp)

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08 17:29:56 +01:00
Eric Blake 51e72bc1dd qapi: Swap visit_* arguments for consistent 'name' placement
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp).  This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order.  It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.

Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.

Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.

Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
 $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings').  The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.

    // Part 1: Swap declaration order
    @@
    type TV, TErr, TObj, T1, T2;
    identifier OBJ, ARG1, ARG2;
    @@
     void visit_start_struct
    -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
    +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
     { ... }

    @@
    type bool, TV, T1;
    identifier ARG1;
    @@
     bool visit_optional
    -(TV v, T1 ARG1, const char *name)
    +(TV v, const char *name, T1 ARG1)
     { ... }

    @@
    type TV, TErr, TObj, T1;
    identifier OBJ, ARG1;
    @@
     void visit_get_next_type
    -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
    +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
     { ... }

    @@
    type TV, TErr, TObj, T1, T2;
    identifier OBJ, ARG1, ARG2;
    @@
     void visit_type_enum
    -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
    +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
     { ... }

    @@
    type TV, TErr, TObj;
    identifier OBJ;
    identifier VISIT_TYPE =~ "^visit_type_";
    @@
     void VISIT_TYPE
    -(TV v, TObj OBJ, const char *name, TErr errp)
    +(TV v, const char *name, TObj OBJ, TErr errp)
     { ... }

    // Part 2: swap caller order
    @@
    expression V, NAME, OBJ, ARG1, ARG2, ERR;
    identifier VISIT_TYPE =~ "^visit_type_";
    @@
    (
    -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
    +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
    |
    -visit_optional(V, ARG1, NAME)
    +visit_optional(V, NAME, ARG1)
    |
    -visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
    +visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
    |
    -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
    +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
    |
    -VISIT_TYPE(V, OBJ, NAME, ERR)
    +VISIT_TYPE(V, NAME, OBJ, ERR)
    )

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08 17:29:56 +01:00
Peter Maydell 2744d9207f net: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-11-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
zhanghailiang aa9156f4b1 net/filter: Fix the output information for command 'info network'
The properties of netfilter object could be changed by 'qom-set'
command, but the output of 'info network' command is not updated,
because it got the old information through nf->info_str, it will
not be updated while we change the value of netfilter's property.

Here we split a helper function that could collect the output
information for filter, and also remove the useless member
'info_str' from struct NetFilterState.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 14:13:11 +08:00
Li Zhijian 25aaadf063 net: always walk through filters in reverse if traffic is egress
Previously, if we attach more than one filters for a single netdev,
both ingress and egress traffic will go through net filters in same
order like:

ingress: netdev ->filter1 ->filter2 ->...filter[n] ->emulated device
egress: emulated device ->filter1 ->filter2 ->...filter[n] ->netdev.

This is against the natural feeling and will complicate filters
configuration since in some scenes, we hope filters handle the egress
traffic in a reverse order. For example, in colo-proxy (will be
implemented later), we have a redirector filter and a colo-rewriter
filter, we need the filter behave like:

ingress(->)/egress(<-): chardev<->redirector<->colo-rewriter<->emulated device

Since both buffer filter and dump do not require strict order of
filters, this patch switches to always let egress traffic walk through
net filters in reverse to simplify the possible filters configuration
in the future.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 14:13:11 +08:00
Vincenzo Maffione ab685220f6 net: netmap: use nm_open() to open netmap ports
This patch simplifies the netmap backend code by means of the nm_open()
helper function provided by netmap_user.h, which hides the details of
open(), iotcl() and mmap() carried out on the netmap device.

Moreover, the semantic of nm_open() makes it possible to open special
netmap ports (e.g. pipes, monitors) and use special modes (e.g. host rings
only, single queue mode, exclusive access).

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 14:13:11 +08:00
Thomas Huth f853ac66c7 net/slirp: Tell the users when they are using deprecated options
We don't want to support the legacy -tftp, -bootp, -smb and
-net channel options forever. So let's start telling the users
that they are deprecated and what option should be used instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Daniel P. Berrange 7746abd8e9 qom: Change object property iterator API contract
Currently the ObjectProperty iterator API works as follows:

  ObjectPropertyIterator *iter;

  iter = object_property_iter_init(obj);
  while ((prop = object_property_iter_next(iter))) {
     ...
  }
  object_property_iter_free(iter);

This has the benefit that the ObjectPropertyIterator struct
can be opaque, but has the downside that callers need to
explicitly call a free function. It is also not in keeping
with iterator style used elsewhere in QEMU/GLib2.

This patch changes the API to use stack allocation instead:

  ObjectPropertyIterator iter;

  object_property_iter_init(&iter, obj);
  while ((prop = object_property_iter_next(&iter))) {
     ...
  }

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[AF: Fused ObjectPropertyIterator struct with typedef]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2016-01-18 17:47:58 +01:00
Markus Armbruster 9af9e0fed7 error: Strip trailing '\n' from error string arguments (again)
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back.  Tracked down with the Coccinelle semantic patch
from commit 312fd5f.

Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
2016-01-13 15:16:18 +01:00
Peter Maydell 692a5519ab trivial patches for 2016-01-11
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWk2pEAAoJEL7lnXSkw9fbYKkIAJED5g08gImjxN5opEh2mxlJ
 /TfzFLmDz6AS67eBjCLVVVI0SZ4RAHyZFySFE8PFeRRQFdigqJUeR2U8Ivwnx2I8
 3ALfKa3H1omEe82o+WGDm9pLkVmzmsLSaUZJ4I7uOSRqSE3w45hMsI5j/sR+hbpy
 yjNOzYFRc84uJswiXUFwsCUCEqokyG83ShjaQpR7J3IjRhe2qqy/WmVi7+ZOBH+/
 ti8ut2PMs8oS4G45uzBPDaSp7ByJ/jP9uc8YrOC1i88jxc+3XXzTLYSn7oX4OPGv
 P0PC6ytBNIwfGaZges1rEGNXryAmJys04GOPt3tqRtT6r7mrEvpLBWZvQru2Z8Y=
 =N4aD
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2016-01-11' into staging

trivial patches for 2016-01-11

# gpg: Signature made Mon 11 Jan 2016 08:39:32 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2016-01-11:
  hw/s390x: Remove superfluous return statements
  hw/core/qdev: Remove superfluous return statement
  hw/acpi: Remove superfluous return statement
  hw/ide: Remove superfluous return statements
  osdep.h: Include glib-compat.h in osdep.h rather than qemu-common.h
  scripts/checkpatch.pl: Don't allow special cases of unspaced operators
  PCI Bonito: QOMify and cleanup
  SH PCI Host: convert to realize()
  gt64120: convert to realize()
  Add missing syscall nrs. according to more recent Linux kernels
  hw/misc/edu: Convert to realize()
  configure: fix trace backend check
  xen/Makefile.objs: simplify
  crypto: Fix typo in example
  MAINTAINERS: Add the correct device_tree.h file
  iscsi: fix readcapacity error message
  net: convert qemu_log to error_report, fix message
  linux-user: enable sigaltstack for all architectures
  unicore32: convert get_sp_from_cpustate from macro to inline

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 12:56:58 +00:00
Paolo Bonzini 34f22fc034 net: convert qemu_log to error_report, fix message
Ensure that the error is printed with the proper timestamp.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Alexis Dambricourt 3be9b3528d l2tpv3: fix cookie decoding
If a 32 bits l2tpv3 frame cookie MSB if set to 1, the cast to uint64_t
cookie will spread 1 to the four most significant bytes.
Then the condition (cookie != s->rx_cookie) becomes false.

Signed-off-by: Alexis Dambricourt <alexis.dambricourt@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:35 +08:00
Li Zhijian 671f66f87f net/filter: fix nf->netdev_id leak
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Li Zhijian b50c7d452f net/dump: fix nfds->filename leak
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Eric Blake 7fb1cf1606 qapi: Don't let implicit enum MAX member collide
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes.  Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.

This patch was mostly generated by applying a temporary patch:

|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
|     max_index = c_enum_const(name, 'MAX', prefix)
|     ret += mcgen('''
|     [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
|                max_index=max_index)

then running:

$ cat qapi-{types,event}.c tests/test-qapi-types.c |
    sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list

The only things not generated are the changes in scripts/qapi.py.

Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Victor Kaplansky 6f6f9512ea vhost-user: verify that number of queues is non-zero
Fix QEMU crash when -netdev type=vhost-user,queues=n is passed
with zero number of queues.

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
2015-12-02 16:42:27 +02:00
Andrew Baumann b73c184914 tap-win32: disable broken async write path
The code under the TUN_ASYNCHRONOUS_WRITES path makes two incorrect
assumptions about the behaviour of the WriteFile API for overlapped
file handles. First, WriteFile does not update the
lpNumberOfBytesWritten parameter when the write completes
asynchronously (the number of bytes written is known only when the
operation completes). Second, the buffer shouldn't be touched (or
freed) until the operation completes. This led to at least one bug
where tap_win32_write returned zero bytes written, which in turn
caused further writes ("receives") to be disabled for that device.

This change disables the asynchronous write path, while keeping most
of the code around in case someone sees value in resurrecting it. It
also adds some conditional debug output, similar to the read path.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Acked-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-11-27 10:39:55 +08:00
Andrew Baumann ee0428e3ac tap-win32: skip unexpected nodes during registry enumeration
In order to find a named tap device, get_device_guid() enumerates children of
HKLM\SYSTEM\CCS\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}
(aka NETWORK_CONNECTIONS_KEY). For each child, it then looks for a
"Connection" subkey, but if this key doesn't exist, it aborts the
entire search. This was observed to fail on at least one Windows 10
machine, where there is an additional child of NETWORK_CONNECTIONS_KEY
(named "Descriptions"). Since registry enumeration doesn't guarantee
any particular sort order, we should continue to search for matching
children rather than aborting the search.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-11-27 10:39:55 +08:00
Wen Congyang d39c87d707 vhost-user: set link down when the char device is closed
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
2015-11-25 13:42:38 +02:00
Daniel P. Berrange 456fb0bfe0 net: Convert net filter code to use object property iterators
Stop directly accessing the Object::properties field data
structure and instead use the formal object property iterator
APIs. This insulates the code from future data structure
changes in the Object struct.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-11-18 21:13:49 +01:00
Vincenzo Maffione 39bec4f38b net: netmap: use error_setg() helpers in place of error_report()
This update was required to align error reporting of netmap backend
initialization to the modifications introduced by commit a30ecde.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-11-12 15:31:52 +08:00
Vincenzo Maffione 54c59b4de5 net: netmap: Fix compilation issue
Reorganization of struct NetClientOptions (commit e4ba22b) caused a
compilation failure of the netmap backend. This patch fixes the issue
by properly accessing the union field.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-11-12 15:30:47 +08:00
Ed Maste bd54a9f943 tap-bsd: use user-specified tap device if it already exists
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-11-06 15:42:38 +03:00
Eric Blake 8d0bcba837 net: Convert to new qapi union layout
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.

Make the conversion to the new layout for net-related code.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-18-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02 08:30:27 +01:00
Yang Hongyang a3e8a3f382 net: free the string returned by object_get_canonical_path_component
The value returned from object_get_canonical_path_component
must be freed.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-27 10:30:42 +08:00
Yang Hongyang edc981443d net: make iov_to_buf take right size argument in nc_sendv_compat()
We want "buf, sizeof(buf)" here.  sizeof(buffer) is the size of a
pointer, which is wrong.
Thanks to Paolo for pointing it out.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-27 10:30:40 +08:00
Vladislav Yasevich 5320c2caf4 net: Remove duplicate data from query-rx-filter on multiqueue net devices
When responding to a query-rx-filter command on a multiqueue
netdev, qemu reports the data for each queue.  The data, however,
is not per-queue, but per device and the same data is reported
multiple times.  This causes confusion and may also cause extra
unnecessary processing when looking at the data.

Commit 638fb14169 (net: Make qmp_query_rx_filter() with name argument
more obvious) partially addresses this issue, by limiting the output
when the name is specified.  However, when the name is not specified,
the issue still persists.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-27 10:30:39 +08:00
Thomas Huth 9d3e12e881 net/dump: Provide the dumping facility as a net-filter
Use the net-filter infrastructure to provide the dumping
functions for netdev devices, too.

Reviewed-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-27 10:30:35 +08:00
Thomas Huth 75310e3486 net/dump: Separate the NetClientState from the DumpState
With the upcoming dumping-via-netfilter patch, the DumpState
should not be related to NetClientState anymore, so move the
related information to a new struct called DumpNetClient.

Reviewed-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-27 10:30:34 +08:00
Thomas Huth 7bc3074c27 net/dump: Rework net-dump init functions
Move the creation of the dump client from net_dump_init() into
net_init_dump(), so we can later use the former function for
dump via netfilter, too. Also rename net_dump_init() to
net_dump_state_init() to make it easier distinguishable from
net_init_dump().

Reviewed-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-27 10:30:32 +08:00
Thomas Huth 43192fcc1a net/dump: Add support for receive_iov function
Adding a proper receive_iov function to the net dump module.
This will make it easier to support the dump filter feature for
the -netdev option in later patches.

Reviewed-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-27 10:30:31 +08:00
Thibaut Collet 3e866365e1 vhost user: add rarp sending after live migration for legacy guest
A new vhost user message is added to allow QEMU to ask to vhost user backend to
broadcast a fake RARP after live migration for guest without GUEST_ANNOUNCE
capability.

This new message is sent only if the backend supports the new
VHOST_USER_PROTOCOL_F_RARP protocol feature.
The payload of this new message is the MAC address of the guest (not known by
the backend). The MAC address is copied in the first 6 bytes of a u64 to avoid
to create a new payload message type.

This new message has no equivalent ioctl so a new callback is added in the
userOps structure to send the request.

Upon reception of this new message the vhost user backend must generate and
broadcast a fake RARP request to notify the migration is terminated.

Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
[Rebased and fixed checkpatch errors - Marc-André]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22 14:34:49 +03:00
Thibaut Collet f6f56291de vhost user: add support of live migration
Some vhost user backends are able to support live migration.
To provide this service the following features must be added:
1. Add the VIRTIO_NET_F_GUEST_ANNOUNCE capability to vhost-net when netdev
   backend is vhost-user.
2. Provide a nop receive callback to vhost-user.
   This callback is called by:
    *  qemu_announce_self after a migration to send fake RARP to avoid network
       outage for peers talking to the migrated guest.
         - For guest with GUEST_ANNOUNCE capabilities, guest already sends GARP
           when the bit VIRTIO_NET_S_ANNOUNCE is set.
           => These packets must be discarded.
         - For guest without GUEST_ANNOUNCE capabilities, migration termination
           is notified when the guest sends packets.
           => These packets can be discarded.
    * virtio_net_tx_bh with a dummy boot to send fake bootp/dhcp request.
      BIOS guest manages virtio driver to send 4 bootp/dhcp request in case of
      dummy boot.
      => These packets must be discarded.

Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22 14:34:49 +03:00
Marc-André Lureau 69b32a6ce4 net: add trace_vhost_user_event
Replace error_report() and use tracing instead. It's not an error to get
a connection or a disconnection, so silence this and trace it instead.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22 14:34:49 +03:00
Michael S. Tsirkin 052bd52fa9 net: don't set native endianness
commit 5be7d9f1b1
    vhost-net: tell tap backend about the vnet endianness
makes vhost net always try to set LE - even if that matches the
native endian-ness.

This makes it fail on older kernels on x86 without TUNSETVNETLE support.

To fix, make qemu_set_vnet_le/qemu_set_vnet_be skip the
ioctl if it matches the host endian-ness.

Reported-by: Marcel Apfelbaum <marcel@redhat.com>
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-10-21 09:24:44 +03:00
Yang Hongyang 7dbb11c84f netfilter: add a netbuffer filter
This filter is to buffer/release packets. Can be used when using
MicroCheckpointing or other Remus like VM FT solutions.
You can also use it to crudely simulate network delay.  Doesn't
actually delay individual packets, but batches them together, which is
a delay of sorts.

Usage:
 -netdev tap,id=bn0
 -object filter-buffer,id=f0,netdev=bn0,queue=rx,interval=1000

NOTE:
 Interval is in microseconds, it can't be omitted currently, and can't be 0.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:31:28 +08:00
Yang Hongyang b68c7f7692 net/queue: export qemu_net_queue_append_iov
This will be used by buffer filter implementation later to
queue packets.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:31:18 +08:00
Yang Hongyang a4960f52e7 netfilter: print filter info associate with the netdev
When execute "info network", print filter info also.
add a info_str member to NetFilterState, store specific filters
info.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:30:56 +08:00
Yang Hongyang 7ef7bc8586 netfilter: add an API to pass the packet to next filter
add an API qemu_netfilter_pass_to_next() to pass the packet
to next filter.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:30:45 +08:00
Yang Hongyang 3e033a46a7 net/queue: introduce NetQueueDeliverFunc
net/queue.c has logic to send/queue/flush packets but a
qemu_deliver_packet_iov() call is hardcoded. Abstract this
func so that we can use our own deliver function in netfilter.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:30:07 +08:00
Yang Hongyang fefe2a78ab net: merge qemu_deliver_packet and qemu_deliver_packet_iov
qemu_deliver_packet_iov already have the compat delivery, we
can drop qemu_deliver_packet.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:30:04 +08:00
Yang Hongyang e64c770d1f netfilter: hook packets before net queue send
Capture packets that will be sent.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:29:39 +08:00
Yang Hongyang fdccce4596 init/cleanup of netfilter object
Add a netfilter object based on QOM.

A netfilter is attached to a netdev, captures all network packets
that pass through the netdev. When we delete the netdev, we also
delete the netfilter object attached to it, because if the netdev is
removed, the filter which attached to it is useless.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:23:40 +08:00
Peter Maydell 690b286fef Remove muldiv64() by using period instead of frequency
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWBVIdAAoJEPMMOL0/L748BXUP/2j+TRnsaU/gMHoL2IGP78BK
 LLLOL7yyV8ZrsrOFvyv8IW0DtpldoYsvObty/bNAr0iq+QwqwGWn9Gw4im5DtIkN
 s7e1WcxLgFHHcT1QLa70MUjjVtRrflTmcW9TVIW79PQ+HsCqnb7EmFZ96HxzH3zN
 YM93eBT6cJV3axsLwJsE82igCXsLo3raKGNb0jt8b6/XwMoR3iUb1Kgs2dJXZUJw
 TYPtHv7sJpQiLQY8Y8o4EjyyjdFuWPVeIfokgPahoOdVA1PSCx6Qh8o+FV1GZ+nF
 vmAr7Jolri6tdbMgRWtIgQQs2YSvPNIUEOYTXVu/4p287JGZPNU5790V2aIczERc
 gEPTqjI6w1AYy8/yMlO3WpfFxXWZH6ZsNBmxCmhH/mczA2dx3DzDlyI7SofQsCHW
 +81U6GSc/Ryy47C+b6m/YZNQDx3yG8rUFtY4PqCcjJwPZdSEhLEM7crC2XWJwy+0
 rg3SnVvXuE2vC/k7UHEYbnFOyVbvezUYJnigbppMilO8nfXIsyuvc7G4AT96jxbt
 4HQJT6ESGEsIToslWObJ53z3jzoAA17xp4gzkZjx7RwSofkFFIaT7jjaA/D2cxFn
 UOXZgAfde6mfg4Ak0czcBYYvm+peEjXBC+DfsBjfAcQ1dz6WSGyd3QZY0J7i9/7y
 iSNiuCE9J6Ha7XVVYzd2
 =krOI
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier-misc/tags/pull-muldiv64-20150925' into staging

Remove muldiv64() by using period instead of frequency

# gpg: Signature made Fri 25 Sep 2015 14:54:37 BST using RSA key ID 3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier-misc/tags/pull-muldiv64-20150925:
  net: remove muldiv64()
  bt: remove muldiv64()
  hpet: remove muldiv64()
  arm: clarify the use of muldiv64()
  openrisc: remove muldiv64()
  mips: remove muldiv64()
  pcnet: remove muldiv64()
  rtl8139: remove muldiv64()
  i6300esb: remove muldiv64()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-25 18:03:19 +01:00
Laurent Vivier ab60b7485c net: remove muldiv64()
muldiv64() is used to convert nanoseconds to microseconds.

    x = muldiv64(qemu_clock_get_ns(..), 1000000, get_ticks_per_sec());

As  get_ticks_per_sec() is 10^9, it can be replaced by:

    x = qemu_clock_get_us(..);

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-25 14:56:38 +02:00
Changchun Ouyang b931bfbf04 vhost-user: add multiple queue support
This patch is initially based a patch from Nikolay Nikolaev.

This patch adds vhost-user multiple queue support, by creating a nc
and vhost_net pair for each queue.

Qemu exits if find that the backend can't support the number of requested
queues (by providing queues=# option). The max number is queried by a
new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol
feature VHOST_USER_PROTOCOL_F_MQ is present first.

The max queue check is done at vhost-user initiation stage. We initiate
one queue first, which, in the meantime, also gets the max_queues the
backend supports.

In older version, it was reported that some messages are sent more times
than necessary. Here we came an agreement with Michael that we could
categorize vhost user messages to 2 types: non-vring specific messages,
which should be sent only once, and vring specific messages, which should
be sent per queue.

Here I introduced a helper function vhost_user_one_time_request(), which
lists following messages as non-vring specific messages:

        VHOST_USER_SET_OWNER
        VHOST_USER_RESET_DEVICE
        VHOST_USER_SET_MEM_TABLE
        VHOST_USER_GET_QUEUE_NUM

For above messages, we simply ignore them when they are not sent the first
time.

Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-24 16:27:53 +03:00
John Snow 594fd21102 trivial: remove trailing newline from error_report
Minor cleanup.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:21:38 +03:00
Fam Zheng 625de449fc net: Flush queued packets when guest resumes
Since commit 6e99c63 "net/socket: Drop net_socket_can_send" and friends,
net queues need to be explicitly flushed after qemu_can_send_packet()
returns false, because the netdev side will disable the polling of fd.

This fixes the case of "cont" after "stop" (or migration).

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1436232067-29144-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-20 18:11:24 +01:00
Jason Wang 091f1f5296 socket: pass correct size in net_socket_send()
We should pass the size of packet instead of the remaining to
qemu_send_packet_async().

Fixes: 6e99c631f1
       ("net/socket: Drop net_socket_can_send")

Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1436259656-24263-1-git-send-email-jasowang@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-20 17:39:05 +01:00
Michael S. Tsirkin d345ed2da3 Revert "vhost-user: add multi queue support"
This reverts commit 830d70db69.

The interface isn't fully backwards-compatible, which is bad.
Let's redo this properly after 2.4.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-20 14:19:40 +03:00
Stefan Hajnoczi 1e81aba5ac net: simplify net_client_init1()
Drop the union and move the hubport creation into the !is_netdev case.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-6-git-send-email-stefanha@redhat.com
2015-06-24 16:33:42 +01:00
Stefan Hajnoczi 4ef0defbad net: drop if expression that is always true
Both is_netdev and !is_netdev paths already check that
net_client_init_func[opts->kind] is non-NULL so there is no need for the
if statement.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-5-git-send-email-stefanha@redhat.com
2015-06-24 16:33:27 +01:00
Stefan Hajnoczi d139e9a6cf net: raise an error if -net type is invalid
When a -net type is used that was not compiled into the binary there
should be an error message.

Note the special case for -net none, which is a no-op.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-4-git-send-email-stefanha@redhat.com
2015-06-24 16:33:20 +01:00
Stefan Hajnoczi 1322629b4f net: replace net_client_init1() netdev whitelist with blacklist
It's cumbersome to keep the whitelist up-to-date.  New netdev backends
should most likely be allowed so a blacklist makes more sense than a
whitelist.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-3-git-send-email-stefanha@redhat.com
2015-06-24 16:30:29 +01:00
Stefan Hajnoczi 027a247bbf net: add missing "netmap" to host_net_devices[]
Although hmp-commands.hx lists "netmap" as a valid host_net_add type,
the command rejects it because it's missing from the list.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1432743412-15943-2-git-send-email-stefanha@redhat.com
2015-06-24 16:29:07 +01:00
Markus Armbruster a0b1a66ea3 Include monitor/monitor.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster cc7a8ea740 Include qapi/qmp/qerror.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster 485febc6d1 qmp: Wean off qerror_report()
The traditional QMP command handler interface

    int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data);

doesn't provide for returning an Error object.  Instead, the handler
is expected to stash it in the monitor with qerror_report().

When we rebased QMP on top of QAPI, we didn't change this interface.
Instead, commit 776574d introduced "middle mode" as a temporary aid
for converting existing QMP commands to QAPI one by one.  More than
three years later, we're still using it.

Middle mode has two effects:

* Instead of the native input marshallers

      static void qmp_marshal_input_FOO(QDict *, QObject **, Error **)

  it generates input marshallers conforming to the traditional QMP
  command handler interface.

* It suppresses generation of code to register them with
  qmp_register_command()

  This permits giving them internal linkage.

As long as we need qmp-commands.hx, we can't use the registry behind
qmp_register_command(), so the latter has to stay for now.

The former has to go to get rid of qerror_report().  Changing all QMP
commands to fit the QAPI mold in one go was impractical back when we
started, but by now there are just a few stragglers left:
do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(),
qmp_netdev_add(), do_device_add().

Switch middle mode to generate native input marshallers, and adapt the
stragglers.  Simplifies both the monitor code and the stragglers.

Rename do_qmp_capabilities() to qmp_capabilities(), and
do_device_add() to qmp_device_add, because that's how QMP command
handlers are named today.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster c6bd8c706a qerror: Clean up QERR_ macros to expand into a single string
These macros expand into error class enumeration constant, comma,
string.  Unclean.  Has been that way since commit 13f59ae.

The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.

Clean up as follows:

* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
  delete it from the QERR_ macro.  No change after preprocessing.

* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
  error_setg(...).  Again, no change after preprocessing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster 75158ebbe2 qerror: Eliminate QERR_DEVICE_NOT_FOUND
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code.  Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left.  Eliminate it with this
coccinelle semantic patch:

    @@
    expression EP, E;
    @@
    -error_set(EP, QERR_DEVICE_NOT_FOUND, E)
    +error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:39 +02:00
Markus Armbruster 70b9433109 QemuOpts: Wean off qerror_report_err()
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP.  It should not be used
elsewhere.

The only remaining user in qemu-option.c is qemu_opts_parse().  Is it
used in QMP context?  If not, we can simply replace
qerror_report_err() by error_report_err().

The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.

The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.

Remaining uses:

* drive_def(): Command line -drive and such, HMP drive_add and pci_add

* hmp_chardev_add(): HMP chardev-add

* monitor_parse_command(): HMP core

* tmp_config_parse(): Command line -tpmdev

* net_host_device_add(): HMP host_net_add

* net_client_parse(): Command line -net and -netdev

* qemu_global_option(): Command line -global

* vnc_parse_func(): Command line -display, -vnc, default display, HMP
  change, QMP change.  Bummer.

* qemu_pci_hot_add_nic(): HMP pci_add

* usb_net_init(): Command line -usbdevice, HMP usb_add

Propagate errors through qemu_opts_parse().  Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err().  Switch all non-QMP users outside tests to it.

That leaves vnc_parse_func().  Propagate errors through it.  Since I'm
touching it anyway, rename it to vnc_parse().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:39 +02:00
Peter Maydell 89e9429c3c virtio, pci fixes, enhancements
Most notably this includes virtio cross-endian patches.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVg+xdAAoJECgfDbjSjVRp6AAH/3ILznMtvJZjQ/WOjLEsL13M
 +0cYEM1LI6LbLhqeruQVVcY9/hx61yHxZMoLkVg/I2po7F4HDNI2vo5Y7eGx+xN0
 5rlcAw9/ZQ6SkCVmjN/VZfISW5mSqCaKH8gNzu8AigjsryJSj5iDXv1YJimwsF+5
 cgCerhLIVvEkXmNj1ChwR+fz1IgFzJ8TRaZ0N2glxLyVjgKS57diqZF3Rbg2DdQl
 BPbekbbtxesPgmKRvtarbhjx26TlnP1YShjhWA5r72gBNlqblLDycpaIGXr34b3a
 sLIZjxzQtTEGcaGtkifMgazyK3rY3JmzOshD0onFOWY1r6Abxuj7eTZOEE6JQXk=
 =tju/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pci fixes, enhancements

Most notably this includes virtio cross-endian patches.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vhost: enable vhost without without MSI-X
  pci: Don't register a specialized 'config_write' if default behavior is intended
  hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf()
  vhost_net: re-enable when cross endian
  vhost-net: tell tap backend about the vnet endianness
  tap: fix non-linux build
  tap: add VNET_LE/VNET_BE operations
  vhost: set vring endianness for legacy virtio
  virtio: introduce virtio_legacy_is_cross_endian()
  linux-headers: sync vhost.h
  vhost-user: part of virtio

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 11:30:57 +01:00
Pankaj Gupta 1e7398a140 vhost: enable vhost without without MSI-X
We use vhostforce to enable vhost even if Guests don't have MSI-X
support and we fall back to QEMU virtio-net.

This gives a very small performance gain, but the disadvantage
is that guest now controls which virtio code is running
(qemu or vhost) so our attack surface is doubled.

This patch will enable vhost unconditionally whenever it's requested.
For compatibility, enable vhost when vhostforce is set, as well.

Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
2015-06-19 12:17:49 +02:00
Michael S. Tsirkin 4ee9b43be9 tap: fix non-linux build
tap_fd_set_vnet_le/tap_fd_set_vnet_be was missing,
fix it up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-06-19 12:17:25 +02:00
Greg Kurz c80cd6bb9c tap: add VNET_LE/VNET_BE operations
The linux tap and macvtap backends can be told to parse vnet headers
according to little or big endian. This is done through the TUNSETVNETLE
and TUNSETVNETBE ioctls.

This patch brings all the plumbing for QEMU to use these APIs.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-17 17:12:54 +02:00
Fam Zheng 82e1cc4bf9 Change qemu_set_fd_handler2(..., NULL, ...) to qemu_set_fd_handler
Done with following Coccinelle semantic patch, plus manual cosmetic changes in
net/*.c.

    @@
    expression E1, E2, E3, E4;
    @@
    -   qemu_set_fd_handler2(E1, NULL, E2, E3, E4);
    +   qemu_set_fd_handler(E1, E2, E3, E4);

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-8-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng a90a7425cf tap: Drop tap_can_send
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be sent to peer when it arrives. If the device can't
receive, it will be queued to incoming_queue, and when the device status
changes, this queue will be flushed.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-7-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng 6e99c631f1 net/socket: Drop net_socket_can_send
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be sent to peer when it arrives. If the device can't
receive, it will be queued to incoming_queue, and when the device status
changes, this queue will be flushed.

If the peer is not ready, disable the read poll until send completes.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-6-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng e8dd1d9c39 netmap: Drop netmap_can_send
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be copied from s->fd to s->iov when it arrives. If the
device can't receive, it will be queued to incoming_queue, and when the
device status changes, this queue will be flushed.

Also remove the qemu_can_send_packet() check in netmap_send. If it's
true, we are good; if it's false, the qemu_sendv_packet_async would
return 0 and read poll will be disabled until netmap_send_completed is
called.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-5-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng 95b1416ae9 l2tpv3: Drop l2tpv3_can_send
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be copied from s->fd to s->msgvec when it arrives. If the
device can't receive, it will be queued to incoming_queue, and when the
device status changes, this queue will be flushed.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Markus Armbruster 8190483196 vhost-user: Improve -netdev/netdev_add/-net/... error reporting
When -netdev vhost-user fails, it first reports a specific error, then
one or more generic ones, like this:

    $ qemu-system-x86_64 -netdev vhost-user,id=foo,chardev=xxx
    qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: chardev "xxx" not found
    qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: No suitable chardev found
    qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: Device 'vhost-user' could not be initialized

With the command line, the messages go to stderr.  In HMP, they go to
the monitor.  In QMP, the last one becomes the error reply, and the
others go to stderr.

Convert net_init_vhost_user() and its helpers to Error.  This
suppresses the unwanted unspecific error messages, and makes the
specific error the QMP error reply.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-09 07:40:24 +02:00
Markus Armbruster 71df1d8337 QemuOpts: Convert qemu_opt_foreach() to Error
Retain the function value for now, to permit selective conversion of
its callers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-09 07:40:23 +02:00
Markus Armbruster 1640b200d5 QemuOpts: Drop qemu_opt_foreach() parameter abort_on_failure
When the argument is non-zero, qemu_opt_foreach() stops on callback
returning non-zero, and returns that value.

When the argument is zero, it doesn't stop, and returns the callback's
value from the last iteration.

The two callers that pass zero could just as well pass one:

* qemu_spice_init()'s callback add_channel() either returns zero or
  exit()s.

* config_write_opts()'s callback config_write_opt() always returns
  zero.

Drop the parameter, and always stop.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-09 07:40:23 +02:00
Markus Armbruster 28d0de7a4f QemuOpts: Convert qemu_opts_foreach() to Error
Retain the function value for now, to permit selective conversion of
its callers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-06-09 07:37:37 +02:00
Markus Armbruster a4c7367f7d QemuOpts: Drop qemu_opts_foreach() parameter abort_on_failure
When the argument is non-zero, qemu_opts_foreach() stops on callback
returning non-zero, and returns that value.

When the argument is zero, it doesn't stop, and returns the bit-wise
inclusive or of all the return values.  Funky :)

The callers that pass zero could just as well pass one, because their
callbacks can't return anything but zero:

* qemu_add_globals()'s callback qdev_add_one_global()

* qemu_config_write()'s callback config_write_opts()

* main()'s callbacks default_driver_check(), drive_enable_snapshot(),
  vnc_init_func()

Drop the parameter, and always stop.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-06-08 19:33:20 +02:00
Michael Tokarev 8b8f1c7e9d slirp: use less predictable directory name in /tmp for smb config (CVE-2015-4037)
In this version I used mkdtemp(3) which is:

        _BSD_SOURCE
        || /* Since glibc 2.10: */
            (_POSIX_C_SOURCE >= 200809L || _XOPEN_SOURCE >= 700)

(POSIX.1-2008), so should be available on systems we care about.

While at it, reset the resulting directory name within smb structure
on error so cleanup function wont try to remove directory which we
failed to create.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-06-03 14:21:45 +03:00
Ouyang Changchun 830d70db69 vhost-user: add multi queue support
Based on patch by Nikolay Nikolaev:
Vhost-user will implement the multi queue support in a similar way
to what vhost already has - a separate thread for each queue.
To enable the multi queue functionality - a new command line parameter
"queues" is introduced for the vhost-user netdev.

Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01 14:18:55 +02:00
Shannon Zhao 2bc22a58e1 net/net: Record usage status of mac address
Currently QEMU dynamically generates mac address for the NIC which
doesn't specify the mac address. But when we hotplug a NIC without
specifying mac address, the mac address will increase for the same NIC
along with hotplug and hot-unplug, and at last it will overflow. And if
we codeplug one NIC with mac address e.g. "52:54:00:12:34:56", then
hotplug one NIC without specifying mac address and the mac address of
the hotplugged NIC is duplicate of "52:54:00:12:34:56".

This patch add a mac_table to record the usage status and free the mac
address when the NIC is unrealized.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster a308817743 tap: Improve -netdev/netdev_add/-net/... tap error reporting
When -netdev tap fails, it first reports a specific error, then a
generic one, like this:

    $ qemu-system-x86_64 -netdev tap,id=foo
    qemu-system-x86_64: -netdev tap,id=foo: could not configure /dev/net/tun: Operation not permitted
    qemu-system-x86_64: -netdev tap,id=foo: Device 'tap' could not be initialized

With the command line, the messages go to stderr.  In HMP, they go to
the monitor.  In QMP, the second one becomes the error reply, and the
first one goes to stderr.

Convert net_init_tap() to Error.  This suppresses the unwanted second
message, and makes the specific error the QMP error reply.

[Dropped duplicate "and" from error message as suggested by Eric Blake:
"ifname=, script=, downscript=, and vnet_hdr=, "
"queues=, and vhostfds= are invalid with helper="
--Stefan]

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-16-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 95c35a74fe tap: Finish conversion of tap_open() to Error
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-15-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 576c6eb670 tap-solaris: Convert tap_open() to Error
Fixes inappropriate use of syslog().

Not fixed: leaks on error paths, suspicious non-fatal errors.  FIXMEs
added instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-14-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 4bce487e14 tap-bsd: Convert tap_open() to Error
Fixes inappropriate use of stderr in monitor command handler.

While there, improve some of the messages a bit.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-13-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00