This is based on mcf_fec.c FEC implementation for Coldfire
* A generic PHY was added (borrowwed from LAN9118)
* The buffer management is also modified as buffers are
slightly different between Coldfire and i.MX
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fb314f8a120aa49f8f6ad886f312c649b484fb5a.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ne2000_receive already checks the same conditions and drops the packet
if it's not ready, removing the .can_receive callback avoids the
necessity to add explicit flushes when the conditions turn true (which
is required by the new semantics of .can_receive since 6e99c63
"net/socket: Drop net_socket_can_send").
Plus the "return 1" if E8390_STOP is also suspicious.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 6e99c63 ("net/socket: Drop net_socket_can_send") changed the
semantics around .can_receive for sockets to now require the device to
flush queued pkts when transitioning to a .can_receive=true state. But
it's OK to drop incoming packets when the link is not active.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When operation in standard mode, we currently return the size
of packet during buffer overflow. This consumes the overflow
packet. Return 0 instead so we can re-process the overflow packet
when we have room.
This fixes issues with lost/dropped fragments of large messages.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1441121206-6997-3-git-send-email-vyasevic@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
rtl8139_do_receive() tries to check for the overflow condition
by making sure that packet_size + 8 does not exceed the
available buffer space. The issue here is that RxBuffAddr,
used to calculate available buffer space, is aligned to a
a 4 byte boundry after every update. So it is possible that
every packet ends up being slightly padded when written
to the receive buffer. This padding is not taken into
account when checking for overflow and we may end up missing
the overflow condition can causing buffer overwrite.
This patch takes alignment into consideration when
checking for overflow condition.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1441121206-6997-2-git-send-email-vyasevic@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The tx offload feature accesses a 16-bit aligned TCP header struct. The
32-bit fields must be accessed using ldl/stl wrappers since some host
architectures fault on unaligned access.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1438604157-29664-4-git-send-email-stefanha@redhat.com
Eliminate the following "custom" macros since they are just duplicates
of net/eth.h macros under a different name:
ETHER_ADDR_LEN -> ETH_ALEN
ETH_P_8021Q -> ETH_P_VLAN
IP_HEADER_LENGTH -> IP_HDR_GET_LEN
TCP_FLAG_FIN -> TH_FIN
TCP_FLAG_PUSH -> TH_PUSH
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1438604157-29664-3-git-send-email-stefanha@redhat.com
The transmit offload features inspect Ethernet, IP, TCP, and UDP
headers. Avoid redefining these net/eth.h structs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1438604157-29664-2-git-send-email-stefanha@redhat.com
After commit 40bad8f3deba15e2074ff34cfe923c12916b1cc5("virtio-net: fix
used len for tx"), async_tx.len was no longer used afterwards. So
remove useless codes with it.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
From: Dana Rubin <dana.rubin@ravellosystems.com>
In commit 80da311d81,
"net/vmxnet3: Fix RX TCP/UDP checksum on partially summed packets"
a debug message was introduced in vmxnet3_rx_need_csum_calculate() for
an unlikely input condition.
The message accidentally printed 'len' variable instead of 'pkt_len'.
Fix, providing the correct argument.
Signed-off-by: Dana Rubin <dana.rubin@ravellosystems.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-id: 1438109090-18957-1-git-send-email-shmulik.ladkani@ravellosystems.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The TCP Data Offset field contains the length of the header. Make sure
it is valid and does not exceed the IP data length.
Reported-by: 朱东海(启路) <donghai.zdh@alibaba-inc.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
TCP Large Segment Offload accesses the TCP header in the packet. If the
packet is too short we must not attempt to access header fields:
tcp_header *p_tcp_hdr = (tcp_header*)(eth_payload_data + hlen);
int tcp_hlen = TCP_HEADER_DATA_OFFSET(p_tcp_hdr);
Reported-by: 朱东海(启路) <donghai.zdh@alibaba-inc.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The IP Total Length field includes the IP header and data. Make sure it
is valid and does not exceed the Ethernet payload size.
Reported-by: 朱东海(启路) <donghai.zdh@alibaba-inc.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The IP Header Length field was only checked in the IP checksum case, but
is used in other cases too.
Reported-by: 朱东海(启路) <donghai.zdh@alibaba-inc.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Transmit offload features access Ethernet and IP headers the packet. If
the packet is too short we must not attempt to access header fields:
int proto = be16_to_cpu(*(uint16_t *)(saved_buffer + 12));
...
eth_payload_data = saved_buffer + ETH_HLEN;
...
ip = (ip_header*)eth_payload_data;
if (IP_HEADER_VERSION(ip) != IP_HEADER_VERSION_4) {
Reported-by: 朱东海(启路) <donghai.zdh@alibaba-inc.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The previous patch stopped using the ip pointer as an indicator that the
IP header is present. When we reach the if (ip) {...} statement we know
ip is always non-NULL.
Remove the if statement to reduce nesting.
Reported-by: 朱东海(启路) <donghai.zdh@alibaba-inc.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Transmit offload needs to parse packet headers. If header fields have
unexpected values the offload processing is skipped.
The code currently uses nested ifs because there is relatively little
input validation. The next patches will add missing input validation
and a goto label is more appropriate to avoid deep if statement nesting.
Reported-by: 朱东海(启路) <donghai.zdh@alibaba-inc.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These two .can_receive() are now reviewed. The net subsystem queue for 2.4 is now empty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVt3TbAAoJEJykq7OBq3PIxcQH/2LEY8q3zetJdNe9Zu1bQMhQ
J/Ah+szCNCCHOpNfQEBI6zRT4wUMZZTlIUM1el2ykYnYqRYd585GK/+RZ0/yWQUG
yYNWAFfj/b586+aazk2+BnosSywVjCZ1f32OtaAsh14c+3aoXkQyahljA4onIuVp
kLi1psmnBZgRf6AeICnuUTTOYq8BBX6CTg0sxPpIbZe57epwGkK+6gtZV6aSW/Ra
lbkhXNrmyyvycGuOLDpyjE3yUvHuwn+H+JFeRklTEA2pKyMg1AYVMrIKvBeQej8u
g4+sYYME0rMuFL9iISwVYnkTBjYZnE8+6on2ELkElGvWf28kqb1rYWYciyRhf1Y=
=K3Fg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
Pull request
These two .can_receive() are now reviewed. The net subsystem queue for 2.4 is now empty.
# gpg: Signature made Tue Jul 28 13:26:03 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/net-pull-request:
xen: Drop net_rx_ok
hw/net: handle flow control in mcf_fec driver receiver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mostly virtio 1 spec compliance fixes.
We are unlikely to make it perfectly compliant in
the first release, but it seems worth it to try.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVtprUAAoJECgfDbjSjVRpgu4H/AljqEXBYIS/+7aZBGO4UnK/
LSyxiOfw/sQPwYr8xqhYtoITVPQqkBnCajBFuDw3IaGrTDQ1pHfG8z5qt3Fri+yC
RtiqiFg1LVR/AI8W/dUDuLAf8xq1GukZr1o59mi3hAA0pcPxUtVjPkZcaq63d0P+
uzCgRw0qlg8nbT7SN2O9HZz7AT2emaUkaJBF2eRBb7r1kg3ZzM0FOtmCWaRhtS5s
8AuHS+038BWA0J/S7yd5YooQh7NfvmWFpRNukMttJrtOmi7f5LCJJF9rxcXAnzOn
Soc0afauCtUTfxJ4gkLqxQ586eKpREQ+7lzkJDQ62g1oD/+VatOMcbu3jdnJEtQ=
=AoJS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio fixes for 2.4
Mostly virtio 1 spec compliance fixes.
We are unlikely to make it perfectly compliant in
the first release, but it seems worth it to try.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon Jul 27 21:55:48 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
virtio: minor cleanup
acpi: fix pvpanic device is not shown in ui
virtio-blk: only clear VIRTIO_F_ANY_LAYOUT for legacy device
virtio-blk: fail get_features when both scsi and 1.0 were set
virtio: get_features() can fail
virtio-pci: fix memory MR cleanup for modern
virtio: set any_layout in virtio core
virtio-9p: fix any_layout
virtio-serial: fix ANY_LAYOUT
virtio: hide legacy features from modern guests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let net_rx_packet() (which checks the same conditions) drops the packet
if the device is not ready. Drop net_xen_info.can_receive and update the
return value for the buffer full case.
We rely on the qemu_flush_queued_packets() in net_event() to wake up
the peer when the buffer becomes available again.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1438077176-378-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The network mcf_fec driver emulated receive side method is not dealing
with network queue flow control properly.
Modify the receive side to check if we have enough space in the
descriptors to store the current packet. If not we process none of it
and return 0. When the guest frees up some buffers through its descriptors
we signal the qemu net layer to send more packets.
[Fixed coding style: 4-space indent and curly braces on if statement.
--Stefan]
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Message-id: 1438045374-10358-1-git-send-email-gerg@uclinux.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Replace memory_region_init_rom_device() with memory_region_init_ram() and
memory_region_set_readonly().
This fixes a guest-triggerable QEMU crash when guest tries to write to PROM.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[leon.alrae@imgtec.com: shorten subject length]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Ethernet requires that messages are at least 64 bytes on the wire. This
limitation does not exist on emulation (no wire message), so remove the
check. Netcard is now able to receive small network packets.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Netcard needs an address space to write data to, which can't be specified
on command line.
This fixes a crash when user starts QEMU with "-device dp8393x"
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
eth_can_rx checks s->rxsize and returns false if it is non-zero. Because
of the .can_receive semantics change, this will make the incoming queue
disabled by peer, until it is explicitly flushed. So we should flush it
when s->rxsize is becoming zero.
Squash eth_can_rx semantics into etx_rx and drop .can_receive()
callback, also add flush when rx buffer becomes available again after a
packet gets queued.
The other conditions, "!axienet_rx_resetting(s) &&
axienet_rx_enabled(s)" are OK because enet_write already calls
qemu_flush_queued_packets when the register bits are changed.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1436955553-22791-13-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.can_receive callback changes semantics that once return 0, backend will
try sending again until explicitly flushed, change the device to meet
that.
dp8393x_can_receive checks SONIC_CR_RXEN bit in SONIC_CR register and
SONIC_ISR_RBE bit in SONIC_ISR register, try flushing the queue when
either bit is being updated.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1436955553-22791-12-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If s->np reaches 31, the queue will be disabled by peer when it sees
stellaris_enet_can_receive() returns false, until we explicitly flushes
it which notifies the peer. Do this when guest is done reading all
existing data.
Move the semantics to stellaris_enet_receive, by returning 0 when the
buffer is full, so that new packets will be queued. In
stellaris_enet_read, flush and restart the queue when guest has done
reading.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1436955553-22791-11-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop .can_receive and move the semantics to mipsnet_receive, by
returning 0.
After 0 is returned, we must flush the queue explicitly to restart it:
Call qemu_flush_queued_packets when s->busy or s->rx_count is being
updated.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1436955553-22791-10-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop .can_receive and move the semantics into minimac2_rx, by returning
0.
That is once minimac2_rx returns 0, incoming packets will be queued
until the queue is explicitly flushed. We do this when s->regs[R_STATE0]
or s->regs[R_STATE1] is changed in minimac2_write.
Also drop the unused trace point.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1436955553-22791-9-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The semantics of .can_receive requires us to flush the queue explicitly
when s->rx_enabled becomes true after it returns 0, but the packet being
queued is not meaningful since the guest hasn't activated the card.
Let's just drop the packet in this case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1436955553-22791-8-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The BH will be scheduled when etsec->rx_buffer_len is becoming 0, which
is the condition of queuing.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1436955553-22791-7-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When etsec_reset returns 0, peer would queue the packet as if
.can_receive returns false. Drop etsec_can_receive and let etsec_receive
carry the semantics.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1436955553-22791-6-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
nic_receive already checks the conditions and drop packets if false.
Due to the new semantics since 6e99c63 ("net/socket: Drop
net_socket_can_send"), having .can_receive returning 0 requires us to
explicitly flush the queued packets when the conditions are becoming
true, but queuing the packets when guest driver is not ready doesn't
make much sense.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1436955553-22791-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pcnet_receive already checks the conditions and drop packets if false.
Due to the new semantics since 6e99c63 ("net/socket: Drop
net_socket_can_send"), having .can_receive returning 0 requires us to
explicitly flush the queued packets when the conditions are becoming
true, but queuing the packets when guest driver is not ready doesn't
make much sense.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1436955553-22791-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1436955553-22791-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The network mcf_fec driver emulated receive side method is returning a
result of 0 causing the network layer to disable receive for this emulated
device. This results in the guest only ever receiving one packet.
Fix the recieve side processing to return the number of bytes that we
passed back through to the guest.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435296436-12152-5-git-send-email-gerg@uclinux.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Linux fec driver needs at least basic phy support to probe and work.
The current qemu mcf_fec emulation has no support for the reading or
writing of the MDIO lines to access an attached phy.
This code adds a very simple set of register results for a fixed phy
setup - very similar to that used on an m5208evb board. This is enough
to probe and identify an emulated attached phy.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435296436-12152-4-git-send-email-gerg@uclinux.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
True is the default.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1435734647-8371-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
True is the default.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1435734647-8371-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert partially summed packets to be fully checksummed.
In case csum offloaded packet, vmxnet3 implementation always passes an
RxCompDesc with the "Checksum calculated and found correct" notification
to the OS. This emulates the observed ESXi behavior.
Therefore, if packet has the NEEDS_CSUM bit set, we must calculate and
place a fully computed checksum into the tcp/udp header. Otherwise, the
OS driver will receive a checksum-correct indication but with the actual
tcp/udp checksum field having just the pseudo header csum value.
If host OS performs forwarding, it will forward an incorrectly
checksummed packet.
Signed-off-by: Dana Rubin <dana.rubin@ravellosystems.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-id: 1436864116-19154-3-git-send-email-shmulik.ladkani@ravellosystems.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Separate RX packet protocol parsing out of 'vmxnet_rx_pkt_attach_data'.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-id: 1436864116-19154-2-git-send-email-shmulik.ladkani@ravellosystems.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit da51a335 adds all queues in .realize(). But if the
guest doesn't support multiqueue, we forget to remove them. And
we cannot handle the ctrl vq corretly. The guest will hang.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch fixes network hang after "stop" then "cont", while network
packets keep arriving.
Tested both manually (tap, host pinging guest) and with Jason's qtest
series (plus his "[PATCH 2.4] socket: pass correct size in
net_socket_send()" fix).
As virtio_net_set_status is called when guest driver is setting status
byte and when vm state is changing, it is a good opportunity to flush
queued packets.
This is necessary because during vm stop the backend (e.g. tap) would
stop rx processing after .can_receive returns false, until the queue is
explicitly flushed or purged.
The other interesting condition in .can_receive, virtio_queue_ready(),
is handled by virtio_net_handle_rx() when guest kicks; the 3rd condition
is invalid queue index which doesn't need flushing.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 032a74a1c0
("virtio-net: byteswap virtio-net header") breaks any layout by
requiring out_sg[0].iov_len >= n->guest_hdr_len. Fixing this by
copying header to temporary buffer if swap is needed, and then use
this buffer as part of out_sg.
Fixes 032a74a1c0
("virtio-net: byteswap virtio-net header")
Cc: qemu-stable@nongnu.org
Cc: clg@fr.ibm.com
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This reverts commit 830d70db69.
The interface isn't fully backwards-compatible, which is bad.
Let's redo this properly after 2.4.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc and virtio changes, bugfixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVo6kaAAoJECgfDbjSjVRpEvcH/jiNHGHD+AzFSJ6+vcKH8MHY
GVyWxvnFimyusnv74c7nwTsRGjRycKCPFy8GN/ZX+VWpIpPwK9mysBQ97zM45xeM
T+w1eT4zXafZESr6coAaUu6AvPnVPmsx2im6j5LxBnyIzj41D7dydOM0dU/OHOSI
gUS2DlhqqRPqkB2LscIrkkCmiWpizxTACzZzrko+AuTZ6YVTOEWcnRps9gqR+MWF
o24uppNPIkkmKoWBbXEiTfTqy7rcWydCb/BiM0UMo2cTOeXESNiaQNbKL2ED8K5d
187sL9XCkBrImh4NOFMy4ZKsJ7Uy9zg+zpk03XbjMF+7S155Fcacp2ahDtuCoDA=
=DITH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio: fixes for 2.4
pc and virtio changes, bugfixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon Jul 13 13:03:38 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc: fix reuse of pc-i440fx-2.4 in pc-i440fx-2.3
Revert "virtio-net: enable virtio 1.0"
virtio-pci: don't crash on illegal length
qdev: fix 64 bit properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit df91055db5.
This is because:
- vhost support virtio 1.0 now
- transport code (e.g virtio-pci) set this feature when modern is
enabled, setting this unconditionally will break disable-modern=on.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
