migrate_ignore_shared() is an optimization that avoids copying memory
that is visible and can be mapped on the target. However, a
memory-backend-ram or a memory-backend-memfd block with the RAM_SHARED
flag set is not migrated when migrate_ignore_shared() is true. This is
wrong, because the block has no named backing store, and its contents will
be lost. To fix, ignore shared memory iff it is a named file. Define a
new flag RAM_NAMED_FILE to distinguish this case.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <1686151116-253260-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, it is only done when the iteration finishes successfully.
Not cleaning up the userfaultfd write protection can lead to
symptoms/issues such as the process hanging in memmove or GDB not
being able to attach.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20230526115908.196171-1-f.ebner@proxmox.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
1. Otherwise failed migration just drops guest-panicked state, which is
not good for management software.
2. We do keep different paused states like guest-panicked during
migration with help of global_state state.
3. We do restore running state on source when migration is cancelled or
failed.
4. "postmigrate" state is documented as "guest is paused following a
successful 'migrate'", so originally it's only for successful path
and we never documented current behavior.
Let's restore paused states like guest-panicked in case of cancel or
fail too. Allow same transitions like for inmigrate state.
This commit changes the behavior that was introduced by commit
42da5550d6 "migration: set state to post-migrate on failure" and
provides a bit different fix on related
https://bugzilla.redhat.com/show_bug.cgi?id=1355683
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-6-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
No logic change here, only refactoring. That's a preparation for next
commit where we finally restore the stopped vm state on migration
failure or cancellation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-5-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Actually global_state_store() can never fail. Let's get rid of extra
error paths.
To make things clear, use new runstate_get() and use same approach for
global_state_store() and global_state_store_running().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-3-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
All callers now pass is_external=false to aio_set_fd_handler() and
aio_set_event_notifier(). The aio_disable_external() API that
temporarily disables fd handlers that were registered is_external=true
is therefore dead code.
Remove aio_disable_external(), aio_enable_external(), and the
is_external arguments to aio_set_fd_handler() and
aio_set_event_notifier().
The entire test-fdmon-epoll test is removed because its sole purpose was
testing aio_disable_external().
Parts of this patch were generated using the following coccinelle
(https://coccinelle.lip6.fr/) semantic patch:
@@
expression ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque;
@@
- aio_set_fd_handler(ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque)
+ aio_set_fd_handler(ctx, fd, io_read, io_write, io_poll, io_poll_ready, opaque)
@@
expression ctx, notifier, is_external, io_read, io_poll, io_poll_ready;
@@
- aio_set_event_notifier(ctx, notifier, is_external, io_read, io_poll, io_poll_ready)
+ aio_set_event_notifier(ctx, notifier, io_read, io_poll, io_poll_ready)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-21-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The items in migration_files are built for libmigration and included
info softmmu_ss from there; no need to also include them directly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform the function selection once, and only if CONFIG_AVX512_OPT
is enabled. Centralize the selection to xbzrle.c, instead of
spreading the init across 3 files.
Remove xbzrle-bench.c. The benefit of being able to benchmark
the different implementations is less important than not peeking
into the internals of the implementation.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Place the CONFIG_AVX512BW_OPT block at the top,
which will aid function selection in the next patch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hi
Based on latest reviewed parts of migration:
- Disable colo (vladimir)
- Migration atomic counters (juan)
Please apply.
-----BEGIN PGP SIGNATURE-----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=3x32
-----END PGP SIGNATURE-----
Merge tag 'migration-20230518-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request
Hi
Based on latest reviewed parts of migration:
- Disable colo (vladimir)
- Migration atomic counters (juan)
Please apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRmXJUACgkQ9IfvGFhy
# 1yNRAxAAjDYJELL34Qovt/WE9qKhYJEvIUGTl1IMWJ22YMFnqIFKRdka57dWoU3P
# 7EK1BHmokEEtzGT7Fe1ecERXsOwQIJDIkDTJ5g8Oc8Jt1iqY1AC8h5T+LghijCar
# mbZ6qWHaSjsg2lmek/xc9quymzFGGK36PSyB5WkaLRviKQn4RIkEDpUaWny7nDbA
# Q8zJJpBqNFqKfC5/DN0ePa3QQscXQJhey3nxqFd8hYp8RFNIV5UJVW5Lf6ombtK7
# atgdWC4ckkfO2z3OsghKeo/UiMFWpPktgBVVMhDLmk+P/E6czc2gfzD6SCvrPKTj
# XowI8hro22HVmq9bEY8PtbjMOfpxrAxer+tM2KR/0O9l3UzUacFsi7KGqCJ1/trQ
# 1tSDjlgyczb8GOgLwwxj8XE+jPHPfVrzCNfDqrBKBNxz6nnZSdZUwhV5mG8FdVtm
# oVVV96BIrNXLl/lIxYIFD/Zyvl8/lrSWQdLkEHTzihYQeXaQfyvPVbV/dOLT4sii
# YUuGCuEhF+DW/qz43G1krwq5/bfxsiZoQzrMV/Odtf0wYQKkabA3KNBIda/vxBCR
# dsLQ7QtmOwKmCzjqw4LUov9vDNYOYr98o7ZqwJ3qeKL4QgFwtEZUFO3VW6UR8fnF
# arVXiTn9wVlkTpu4sT5hLm9400iadhX4Fppji7Ce0tUpLbWbghA=
# =3x32
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 10:12:53 AM PDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [undefined]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230518-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: Fix duplicated included in meson.build
migration/multifd: Compute transferred bytes correctly
migration: We don't need the field rate_limit_used anymore
migration: Use migration_transferred_bytes() to calculate rate_limit
migration: Add a trace for migration_transferred_bytes
migration: Move migration_total_bytes() to migration-stats.c
migration: Move rate_limit_max and rate_limit_used to migration_stats
qemu-file: Account for rate_limit usage on qemu_fflush()
migration: Don't use INT64_MAX for unlimited rate
migration: process_incoming_migration_co(): move colo part to colo
migration: split migration_incoming_co
configure: add --disable-colo-proxy option
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is the commint with the merge error (not in the submited patch).
commit 52623f23b0
Author: Lukas Straub <lukasstraub2@web.de>
Date: Thu Apr 20 11:48:35 2023 +0200
ram-compress.c: Make target independent
Make ram-compress.c target independent.
Fixes: 52623f23b0
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230509170217.83246-1-quintela@redhat.com>
In the past, we had to put the in the main thread all the operations
related with sizes due to qemu_file not beeing thread safe. As now
all counters are atomic, we can update the counters just after the
do the write. As an aditional bonus, we are able to use the right
value for the compression methods. Right now we were assuming that
there were no compression at all.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230515195709.63843-17-quintela@redhat.com>
Since previous commit, we calculate how much data we have send with
migration_transferred_bytes() so no need to maintain this counter and
remember to always update it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230515195709.63843-10-quintela@redhat.com>
Once there rename it to migration_transferred_bytes() and pass a
QEMUFile instead of a migration object.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230515195709.63843-7-quintela@redhat.com>
These way we can make them atomic and use this functions from any
place. I also moved all functions that use rate_limit to
migration-stats.
Functions got renamed, they are not qemu_file anymore.
qemu_file_rate_limit -> migration_rate_exceeded
qemu_file_set_rate_limit -> migration_rate_set
qemu_file_get_rate_limit -> migration_rate_get
qemu_file_reset_rate_limit -> migration_rate_reset
qemu_file_acct_rate_limit -> migration_rate_account.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
That is the moment we know we have transferred something.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230515195709.63843-5-quintela@redhat.com>
Define and use RATE_LIMIT_DISABLED instead.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20230515195709.63843-2-quintela@redhat.com>
Let's make better public interface for COLO: instead of
colo_process_incoming_thread and not trivial logic around creating the
thread let's make simple colo_incoming_co(), hiding implementation from
generic code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515130640.46035-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Originally, migration_incoming_co was introduced by
25d0c16f62
"migration: Switch to COLO process after finishing loadvm"
to be able to enter from COLO code to one specific yield point, added
by 25d0c16f62.
Later in 923709896b
"migration: poll the cm event for destination qemu"
we reused this variable to wake the migration incoming coroutine from
RDMA code.
That was doubtful idea. Entering coroutines is a very fragile thing:
you should be absolutely sure which yield point you are going to enter.
I don't know how much is it safe to enter during qemu_loadvm_state()
which I think what RDMA want to do. But for sure RDMA shouldn't enter
the special COLO-related yield-point. As well, COLO code doesn't want
to enter during qemu_loadvm_state(), it want to enter it's own specific
yield-point.
As well, when in 8e48ac9586
"COLO: Add block replication into colo process" we added
bdrv_invalidate_cache_all() call (now it's called activate_all())
it became possible to enter the migration incoming coroutine during
that call which is wrong too.
So, let't make these things separate and disjoint: loadvm_co for RDMA,
non-NULL during qemu_loadvm_state(), and colo_incoming_co for COLO,
non-NULL only around specific yield.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515130640.46035-3-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The global dirty log synchronization is used when KVM and dirty ring
are enabled. There is a particularity for ARM64 where the backup
bitmap is used to track dirty pages in non-running-vcpu situations.
It means the dirty ring works with the combination of ring buffer
and backup bitmap. The dirty bits in the backup bitmap needs to
collected in the last stage of live migration.
In order to identify the last stage of live migration and pass it
down, an extra parameter is added to the relevant functions and
callbacks. This last stage indicator isn't used until the dirty
ring is enabled in the subsequent patches.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-2-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All types used are forward-declared in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230405160454.97436-2-philmd@linaro.org>
[thuth: Add hw/core/cpu.h to migration/dirtyrate.c to fix compile failure]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Function is already quite long.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-7-quintela@redhat.com>
Change all the functions that use it. It was already passed as
uint64_t.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-6-quintela@redhat.com>
It is really size_t. Everything else uses uint64_t, so move this to
uint64_t as well. A size can't be negative anyways.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-5-quintela@redhat.com>
That the implementation does the check every 100 milliseconds is an
implementation detail that shouldn't be seen on the interfaz.
Notice that all callers of qemu_file_set_rate_limit() used the
division or pass 0, so this change is a NOP.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-4-quintela@redhat.com>
And it is the best way to not have rate_limit.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-2-quintela@redhat.com>
After the previous two patches, there is nothing else that is target
specific.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230511141208.17779-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230511141208.17779-5-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230511141208.17779-4-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230511141208.17779-3-quintela@redhat.com>
This significantly reduces overhead of dirty page
rate calculation in sampling mode.
Tested using 32GiB VM on E5-2690 CPU.
With CRC32:
total_pages=8388608 sampled_pages=16384 millis=71
With xxHash:
total_pages=8388608 sampled_pages=16384 millis=14
Signed-off-by: Andrei Gudkov <gudkov.andrei@huawei.com>
Message-Id: <cd115a89fc81d5f2eeb4ea7d57a98b84f794f340.1682598010.git.gudkov.andrei@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Expose qemu_cpu_list_lock globally so that we can use
WITH_QEMU_LOCK_GUARD and QEMU_LOCK_GUARD to simplify a few code paths
now and in future.
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427020925.51003-2-quic_jiles@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We generally require same set of capabilities on source and target.
Let's require x-colo capability to use COLO on target.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230428194928.1426370-11-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
COLO is not listed as running state in migrate_is_running(), so, it's
theoretically possible to disable colo capability in COLO state and the
unexpected error in migration_iteration_finish() is reachable.
Let's disallow that in qmp_migrate_set_capabilities. Than the error
becomes absolutely unreachable: we can get into COLO state only with
enabled capability and can't disable it while we are in COLO state. So
substitute the error by simple assertion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230428194928.1426370-10-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
have_colo_incoming_thread variable is unused. colo_incoming_thread can
be local.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230428194928.1426370-6-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We don't allow to use x-colo capability when replication is not
configured. So, no reason to build COLO when replication is disabled,
it's unusable in this case.
Note also that the check in migrate_caps_check() is not the only
restriction: some functions in migration/colo.c will just abort if
called with not defined CONFIG_REPLICATION, for example:
migration_iteration_finish()
case MIGRATION_STATUS_COLO:
migrate_start_colo_process()
colo_process_checkpoint()
abort()
It could probably make sense to have possibility to enable COLO without
REPLICATION, but this requires deeper audit of colo & replication code,
which may be done later if needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230428194928.1426370-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
colo_checkpoint_notify() is mostly used in colo.c. Outside we use it
once when x-checkpoint-delay migration parameter is set. So, let's
simplify the external API to only that function - notify COLO that
parameter was set. This make external API more robust and hides
implementation details from external callers. Also this helps us to
make COLO module optional in further patch (i.e. we are going to add
possibility not build the COLO module).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230428194928.1426370-3-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This will be used in the next commits to add colo support to multifd.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <88135197411df1a71d7832962b39abf60faf0021.1683572883.git.lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is not required, colo_flush_ram_cache does not run concurrently
with the multifd threads since the cache is only flushed after
everything has been received. But it makes me more comfortable.
This will be used in the next commits to add colo support to multifd.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <35cb23ba854151d38a31e3a5c8a1020e4283cb4a.1683572883.git.lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The overhead of the mutex in non-multifd mode is negligible,
because in that case its just the single thread taking the mutex.
This will be used in the next commits to add colo support to multifd.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <22d83cb428f37929563155531bfb69fd8953cc61.1683572883.git.lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Commit fe904ea824 added a fail_inactivate label, which tries to
reactivate disks on the source after a failure while s->state ==
MIGRATION_STATUS_ACTIVE, but didn't actually use the label if
qemu_savevm_state_complete_precopy() failed. This failure to
reactivate is also present in commit 6039dd5b1c (also covering the new
s->state == MIGRATION_STATUS_DEVICE state) and 403d18ae (ensuring
s->block_inactive is set more reliably).
Consolidate the two labels back into one - no matter HOW migration is
failed, if there is any chance we can reach vm_start() after having
attempted inactivation, it is essential that we have tried to restart
disks before then. This also makes the cleanup more like
migrate_fd_cancel().
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230502205212.134680-1-eblake@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes compress with colo.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Make ram-compress.c target independent.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Before this series, "nothing to send" was handled by the file buffer
being empty. Now it is tracked via param->result.
Assert that the file buffer state matches the result.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
No functional changes intended.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
