QEMUFile * is only intended for migration nowadays. Using it for
anything else just adds pain and a layer of buffers for no good
reason.
Signed-off-by: Juan Quintela <quintela@redhat.com>
CC: malc <av1474@comtv.ru>
Signed-off-by: malc <av1474@comtv.ru>
QEMUFile * is only intended for migration nowadays. Using it for
anything else just adds pain and a layer of buffers for no good
reason.
Signed-off-by: Juan Quintela <quintela@redhat.com>
CC: malc <av1474@comtv.ru>
Signed-off-by: malc <av1474@comtv.ru>
The config string is variously delimited by =, @, and /, depending on the
field. Allow these characters to be escaped by preceeding them with \.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that iothread is always compiled sending a signal seems only an
additional step. This patch also avoid writing to two pipe (one from signal
and one in qemu_service_io).
Work with kvm enabled or disabled. strace output is more readable (less syscalls).
[ kwolf: Merged build fix by Paolo Bonzini ]
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When assigning a 32-bit value to cmd->xfer (which is 64-bits)
it can be erroneously sign extended because the intermediate
32-bit computation is signed. Fix this by standardizing on
the ld*_be_p functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
librbd recently added async writeback and flush support. If the new
rbd_flush() call is available, call it.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Properly document the configuration string syntax and semantics. Remove
(out of date) details about the librbd implementation.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we are reading from the default config location, ignore any failures.
It is perfectly legal for the user to specify exactly the options they need
and to not rely on any config file.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I've found that FreeBSD AHCI driver doesn't work with AHCI hardware
emulation of QEMU 0.15.0. I believe the problem is on QEMU's side. As I
see, it clears port's Interrupt Enable register each time when reset of
any level happens. Is is reasonable for the global controller reset. It
is probably not good, but acceptable for FreeBSD driver for the port
hard reset. But it is IMO wrong for the device soft reset. None of real
hardware I know behaves that way.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Release extent_file on error in vmdk_parse_extents. Added closing files
in freeing extents.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It will not be needed for reads and writes if the HBA provides a sglist.
In addition, this lets scsi-disk refuse commands with an excessive
allocation length, as well as limit memory on usual well-behaved guests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also, consistently use qiov.size instead of iov.iov_len.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes various problems with completion/cancellation:
* if the io_func fails to get an AIOCB, the callback wasn't called
* If DMA encounters a bounce buffer conflict, and the DMA operation is
canceled before the bottom half fires, bad things happen.
* memory is not unmapped after cancellation, again causing problems
when doing DMA to I/O areas
* cancellation could leak the iovec
* the callback was missed if the I/O operation failed without returning
an AIOCB
and probably more that I've missed. The patch fixes them by sharing
the cleanup code between completion and cancellation. The dma_bdrv_cb
now returns a boolean completed/not completed flag, and the wrapper
dma_continue takes care of tasks to do upon completion.
Most of these are basically impossible in practice, but it is better
to be tidy...
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Target-independent code cannot construct sglists, but it can take
them from the outside as a black box. Allow this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Support bridge filtering on top of the memory
API as suggested by Avi Kivity:
Create a memory region for the bridge's address space. This region is
not directly added to system_memory or its descendants. Devices under
the bridge see this region as its pci_address_space(). The region is
as large as the entire address space - it does not take into account
any windows.
For each of the three windows (pref, non-pref, vga), create an alias
with the appropriate start and size. Map the alias into the bridge's
parent's pci_address_space(), as subregions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The switch to the new memory API caused the following problem:
The pci device may call pci_register_bar() to use PCI bus's address
space. But we don't init PCI bus's address space if it is not bus
0. A crash was reported:
http://lists.gnu.org/archive/html/qemu-devel/2011-08/msg02243.html
More work will be needed to make bridge filtering work correctly
with the memory API.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix up some erroneous comments in code:
interrupt pins are named A-D, the
interrupt pin register is always readonly
and isn't zeroed out on reset.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
eepro100 was the last user. Now pci_add_capability is powerful enough.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I found no rationale for this in the logs, and it is quite bad because
it will make scsi-generic unsafe WRT power failures.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The nbd kernel module cannot enable DISCARD requests unless it is
informed about it. The flags field in the header is used for this,
and this patch adds support for it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
nbd supports writing flags in bytes 24...27 of the header,
and uses that for the read-only flag. Add support for it
in qemu-nbd.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we use memory API in sun4u.c, after
71579cae30, setting up isa_mem_base
puts vga.chain4 outside of the physical address space.
Fix by removing obsolete isa_mem_base set up.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instead of the offset property use the proper addr property to calculate
the offsets.
Additionally, be a little more verbose on the warning and print the
subregion name.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Avi Kivity <avi@redhat.com>
The second register is only needed for 32 bit hosts.
Cc: Vassili Karpov <av1474@comtv.ru>
Fine-with-me'd-by: Vassili Karpov <av1474@comtv.ru>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The second register is only needed for 32 bit hosts.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The second register is only needed for 32 bit hosts.
Cc: Alexander Graf <agraf@suse.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The second register is never used for ia64 hosts.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The second register is only needed for 32 bit hosts.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
haddp[sd], hsubp[sd] and addsubp[sd] operate on floats, thus it is
necessary to use the appropriate floating point calculation functions.
If this is not done, those functions operate merely on integers, which
is not correct.
Signed-off-by: Max Reitz <max@tyndur.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The virtio device lifecycle can be observed by looking at the sequence
of set status operations. This is especially important for catching the
reset operation (status value 0), which resets the device and all
virtqueues.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now that format strings can end in a PRI*64 macro, remove the
workarounds from the trace-events file.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The tracetool parser only picks up PRI*64 and other format string macros
when enclosed between double quoted strings. Lift this restriction by
extracting everything after the closing ')' as the format string:
cpu_set_apic_base(uint64_t val) "%016"PRIx64
^^ ^^
One trick here: it turns out that backslashes in the format string like
"\n" were being interpreted by echo(1). Fix this by using the POSIX
printf(1) command instead. Although it normally does not make sense to
include backslashes in trace event format strings, an injected newline
causes tracetool to emit a broken header file and I want to eliminate
cases where broken output is emitted, even if the input was bad.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There is no need to put a newline in trace event format strings. The
backend may use the format string within some context and takes care of
how to display the event. The stderr backend automatically appends "\n"
whereas the ust backend does not want a newline at all.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
make -C mybuilddir no longer works (regression caused by commit)
388d475815.
PWD is the directory of the caller (not mybuilddir),
so BUILD_DIR is set to the wrong value.
GNU make sets CURDIR to the correct value.
Use this macro instead of PWD.
Cc: Lluís Vilanova <vilanova@ac.upc.edu>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make qdev_device_help print both device and bus properties.
Helps libvirt to figure whenever bus properties such as
PCI.multifunction are supported present or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This does not yet unbreak PPC (which has its own problems) but
potentially other non-x86 systems where isa_mem_base is != 0.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix a number of bugs in the implementation of writes to the CM_CTRL
system register:
* write to cm_ctrl, not cm_init !
* an '&' vs '^' typo meant we would write the inverse of the bits
* handling the LED via printf() meant we spew lots of output
to stdout when Linux uses the LED as a heartbeat indicator
* we would hw_error() if a reset was requested rather than
actually resetting
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu build fails when CONFIG_MACHINE_BSWAP_H is defined
because float32, float64, etc. are not defined.
This makes qemu build.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Do not mess with active_console, use console_select instead. This fixes
corrupt virtual monitor consoles after issuing the screendump command.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
