The LoPAPR specification defines the following for the RTAS
power-off call: "On successful operation, does not return".
However, the implementation in QEMU currently returns and runs
the guest CPU again for some more cycles. This caused some
trouble with the new ppc implementation of the kvm-unit-tests
recently. So let's make sure that the QEMU implementation
follows the spec, thus stop the CPU to make sure that the
RTAS call does not return to the guest anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 4b23699 "pseries: Add pseries-2.6 machine type" added a new
SPAPR_COMPAT_2_5 macro in the usual way. However, it didn't add this
macro to the existing SPAPR_COMPAT_2_4 macro so that pseries-2.4
inherits newer compatibility properties which are needed for 2.5 and
earlier.
This corrects the oversight.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Also implement the command, by taking device list mask into account
when polling ADB devices.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also implement the command, by removing the hardcoded period of 20 ms/50 Hz
and replacing it by the one requested by user.
Update VMState version to store this new parameter.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The H_SET_XDABR hypercall is similar to H_SET_DABR, but also sets
the extended DABR (DABRX) register.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to LoPAPR, h_set_dabr should simply set DABRX to 3
(if the register is available), and load the parameter into DABR.
If DABRX is not available, the hypervisor has to check the
"Breakpoint Translation" bit of the DABR register first.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is a very simple hypercall that only sets up the SPRG0
register for the guest (since writing to SPRG0 was only permitted
to the hypervisor in older versions of the PowerISA).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
htab_save_first_pass could return without finishing its work due to
timeout. The patch checks if another invocation of it is necessary and
will call it in htab_save_complete if necessary.
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[removed overlong line]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With HV KVM, the guest's hash page table (HPT) is managed by the kernel and
not directly accessible to QEMU. This means that spapr->htab is NULL
and normally env->external_htab would also be NULL for each cpu.
However, that would cause ppc_hash64_load_hpte*() to do the wrong thing in
the few cases where QEMU does need to load entries from the in-kernel HPT.
Specifically, seeing external_htab is NULL, they would look for an HPT
within the guest's address space instead.
To stop that we have an ugly hack in the pseries machine type code to
set external htab to (void *)1 instead.
This patch removes that hack by having ppc_hash64_load_hpte*() explicitly
check kvmppc_kern_htab instead, which makes more sense.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
At the moment the size of the hash page table (HPT) is fixed based on the
maximum memory allowed to the guest. As such, we allocate the table during
machine construction, and just clear it at reset.
However, we're planning to implement a PAPR extension allowing the hash
page table to be resized at runtime. This will mean that on reset we want
to revert it to the default size. It also means that when migrating, we
need to make sure the destination allocates an HPT of size matching the
host, since the guest could have changed it before the migration.
This patch replaces the spapr_alloc_htab() and spapr_reset_htab() functions
with a new spapr_reallocate_hpt() function. This is called at reset and
inbound migration only, not during machine init any more.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
At present we calculate the recommended hash page table (HPT) size for a
pseries guest just once in ppc_spapr_init() before allocating the HPT.
In future patches we're going to want this calculation in other places, so
this splits it out into a helper function. While we're at it, change the
calculation to use ctz() instead of an explicit loop.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
When migrating the 'pseries' machine type with KVM, we use a special fd
to access the hash page table stored within KVM. Usually, this fd is
opened at the beginning of migration, and kept open until the migration
is complete.
However, if there is a guest reset during the migration, the fd can become
stale and we need to re-open it. At the moment we use an 'htab_fd_stale'
flag in sPAPRMachineState to signal this, which is checked in the migration
iterators.
But that's rather ugly. It's simpler to just close and invalidate the
fd on reset, and lazily re-open it in migration if necessary. This patch
implements that change.
This requires a small addition to the machine state's instance_init,
so that htab_fd is initialized to -1 (telling the migration code it
needs to open it) instead of 0, which could be a valid fd.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
No backend was setting an error when ending the visit of a list or
implicit struct, or when moving to the next list node. Make the
callers a bit easier to follow by making this a part of the contract,
and removing the errp argument - callers can then unconditionally end
an object as part of cleanup without having to think about whether a
second error is dominated by a first, because there is no second
error.
A later patch will then tackle the larger task of splitting
visit_end_struct(), which can indeed set an error.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1454075341-13658-24-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
visit_start_struct() and visit_type_enum() had a 'kind' argument
that was usually set to either the stringized version of the
corresponding qapi type name, or to NULL (although some clients
didn't even get that right). But nothing ever used the argument.
It's even hard to argue that it would be useful in a debugger,
as a stack backtrace also tells which type is being visited.
Therefore, drop the 'kind' argument as dead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-22-git-send-email-eblake@redhat.com>
[Harmless rebase mistake cleaned up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
h_enter() in the spapr code needs to know the page size of the HPTE it's
about to insert. Unlike other paths that do this, it doesn't have access
to the SLB, so at the moment it determines this with some open-coded
tests which assume POWER7 or POWER8 page size encodings.
To make this more flexible add ppc_hash64_hpte_page_shift_noslb() to
determine both the "base" page size per segment, and the individual
effective page size from an HPTE alone.
This means that the spapr code should now be able to handle any page size
listed in the env->sps table.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
When HPTEs are removed or modified by hypercalls on spapr, we need to
invalidate the relevant pages in the qemu TLB.
Currently we do that by doing some complicated calculations to work out the
right encoding for the tlbie instruction, then passing that to
ppc_tlb_invalidate_one()... which totally ignores the argument and flushes
the whole tlb.
Avoid that by adding a new flush-by-hpte helper in mmu-hash64.c.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Like a lot of places these files include a mixture of functions taking
both the older CPUPPCState *env and newer PowerPCCPU *cpu. Move a step
closer to cleaning this up by standardizing on PowerPCCPU, except for the
helper_* functions which are called with the CPUPPCState * from tcg.
Callers and some related functions are updated as well, the boundaries of
what's changed here are a bit arbitrary.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
The implementation of the H_ENTER hypercall for PAPR guests needs to
enforce correct access attributes on the inserted HPTE. This means
determining if the HPTE's real address is a regular RAM address (which
requires attributes for coherent access) or an IO address (which requires
attributes for cache-inhibited access).
At the moment this check is implemented with (raddr < machine->ram_size),
but that only handles addresses in the base RAM area, not any hotplugged
RAM.
This patch corrects the problem with a new helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
The functions for migrating the hash page table on pseries machine type
(htab_save_setup() and htab_load()) can report some errors with an
explicit fprintf() before returning an appropriate error code. Change some
of these to use error_report() instead. htab_save_setup() is omitted for
now to avoid conflicts with some other in-progress work.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This function includes a number of explicit fprintf()s for errors.
Change these to use error_report() instead.
Also replace the single exit(EXIT_FAILURE) with an explicit exit(1), since
the latter is the more usual idiom in qemu by a large margin.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Use the error handling infrastructure to pass an error out from
try_create_xics() instead of assuming &error_abort - the caller is in a
better position to decide on error handling policy.
Also change the error handling from an &error_abort to &error_fatal, since
this occurs during the initial machine construction and could be triggered
by bad configuration rather than a program error.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The errors detected in this function necessarily indicate bugs in the rest
of the qemu code, rather than an external or configuration problem.
So, a simple assert() is more appropriate than any more complex error
reporting.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Use error_setg() to return an error rather than an explicit exit().
Previously it was an exit(0) instead of a non-zero exit code, which was
simply a bug. Also improve the error message.
While we're at it change the type of spapr_vga_init() to bool since that's
how we're using it anyway.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Use error_setg() and return an error, rather than using an explicit exit().
Also improve messages, and be more explicit about which constraint failed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Currently spapr_cpu_init() is hardcoded to handle any errors as fatal.
That works for now, since it's only called from initial setup where an
error here means we really can't proceed.
However, we'll want to handle this more flexibly for cpu hotplug in future
so generalize this using the error reporting infrastructure. While we're
at it make a small cleanup in a related part of ppc_spapr_init() to use
error_report() instead of an old-style explicit fprintf().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Current ppc_set_compat() returns -1 for errors, and also (unconditionally)
reports an error message. The caller in h_client_architecture_support()
may then report it again using an outdated fprintf().
Clean this up by using the modern error reporting mechanisms. Also add
strerror(errno) to the error message.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
If guest doesn't have any dynamically reconfigurable (DR) logical memory
blocks (LMB), then we shouldn't create ibm,dynamic-reconfiguration-memory
device tree node.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
h_client_architecture_support() uses rtas_ld() for general purpose memory
access, despite the fact that it's not an RTAS routine at all and rtas_ld
makes things more awkward.
Clean this up by replacing rtas_ld() calls with appropriate ldXX_phys()
calls.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
rtas_st_buffer_direct() is a not particularly useful wrapper around
cpu_physical_memory_write(). All the callers are in
rtas_ibm_configure_connector, where it's better handled by local helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
rtas_st_buffer() appears in spapr.h as though it were a widely used helper,
but in fact it is only used for saving data in a format used by
rtas_ibm_get_system_parameter(). This changes it to a local helper more
specifically for that function.
While we're there fix a couple of small defects in
rtas_ibm_get_system_parameter:
- For the string value SPLPAR_CHARACTERISTICS, it wasn't including the
terminating \0 in the length which it should according to LoPAPR
7.3.16.1
- It now checks that the supplied buffer has at least enough space for
the length of the returned data, and returns an error if it does not.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Currently the aiocb is held within MACIOIDEState, however the IDE core code
assumes that the current actvie DMA aiocb is held in aiocb in a few places,
e.g. ide_bus_reset() and ide_reset().
Switch over to using IDEDMA aiocb to store the aiocb for the current active
DMA request so that bus resets and restarts are handled correctly. As a
consequence we can now use ide_set_inactive() rather than handling its
functionality ourselves.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
Replace the uint32 softfloat-specific typedef with uint32_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint32\b/uint32_t/g'
together with manual removal of the typedef definition,
manual undoing of various mis-hits, and another couple of
fixes found via test compilation.
All the uses in hw/ were using the wrong type by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-5-git-send-email-peter.maydell@linaro.org
Currently the ObjectProperty iterator API works as follows:
ObjectPropertyIterator *iter;
iter = object_property_iter_init(obj);
while ((prop = object_property_iter_next(iter))) {
...
}
object_property_iter_free(iter);
This has the benefit that the ObjectPropertyIterator struct
can be opaque, but has the downside that callers need to
explicitly call a free function. It is also not in keeping
with iterator style used elsewhere in QEMU/GLib2.
This patch changes the API to use stack allocation instead:
ObjectPropertyIterator iter;
object_property_iter_init(&iter, obj);
while ((prop = object_property_iter_next(&iter))) {
...
}
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[AF: Fused ObjectPropertyIterator struct with typedef]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back. Tracked down with the Coccinelle semantic patch
from commit 312fd5f.
Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
Not caught by Coccinelle, because we report the error only
conditionally here.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-14-git-send-email-armbru@redhat.com>
Done with this Coccinelle semantic patch
@@
expression FMT, E, S;
expression list ARGS;
@@
- error_report(FMT, ARGS, error_get_pretty(E));
+ error_reportf_err(E, FMT/*@@@*/, ARGS);
(
- error_free(E);
|
exit(S);
|
abort();
)
followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.
We now use the error whole instead of just its message obtained with
error_get_pretty(). This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Same Coccinelle semantic patch as in commit 565f65d.
We now use the original error whole instead of just its message
obtained with error_get_pretty(). This avoids suppressing its hint
(see commit 50b7b00), but I don't think the errors touched in this
commit can come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-3-git-send-email-armbru@redhat.com>
Printing CPU registers is not helpful during machine initialization.
Moreover, these are straightforward configuration or "can get
resources" errors, so dumping core isn't appropriate either. Replace
hw_error() by error_report(); exit(1). Matches how we report these
errors in other machine initializations.
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-2-git-send-email-armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1449764955-10741-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
[fixed return type of spapr_machine_finalizefn()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The OHCI has some bugs and performance issues, so for
newer machines it's preferable to use XHCI instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This tweaks the way the default machine version is controlled, so that
there will be a bit less churn when each new version is introduced.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Currently each of the *_class_options() functions for the pseries-2.1 ..
pseries-2.5 machine types are standalone. This will become harder to
maintain as new versions are added.
This patch restructures them similarly to x86 where each function calls
the one from the next version, then overrides anything necessary for
compatibility with the specific version and older.
The default behaviour - that for the most recent machine are set up in
the base class initializer spapr_machine_class_init(). Previously it had
some things set up to default to older behaviour with the more recent
machines overriding it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
At the moment all the class_init functions and TypeInfo structures for the
various versioned pseries machine types are open-coded. As more versions
are created this is getting increasingly clumsy.
This patch borrows the approach used in PC, using a DEFINE_SPAPR_MACHINE()
macro to construct most of the boilerplate from simpler 'class_options' and
'instance_options' functions.
This patch makes a small semantic change - the versioned machine types are
now registered through machine_init() instead of type_init(). Since the
new way is how PC already did it, I'm assuming that's correct.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
To make the spapr_machine_*_class_init() functions a little less bulky.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
