The qemu_chr_fe_write method will return -1 on EAGAIN if the
chardev backend write would block. Almost no callers of the
qemu_chr_fe_write() method check the return value, instead
blindly assuming data was successfully sent. In most cases
this will lead to silent data loss on interactive consoles,
but in some cases (eg RNG EGD) it'll just cause corruption
of the protocol being spoken.
We unfortunately can't fix the virtio-console code, due to
a bug in the Linux guest drivers, which would cause the
entire Linux kernel to hang if we delay processing of the
incoming data in any way. Fixing this requires first fixing
the guest driver to not hold spinlocks while writing to the
hvc device backend.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
struct arphdr is already used by the system headers on OpenBSD
and thus QEMU does not compile here anymore. Fix it by renaming
our struct to slirp_arphdr instead.
Reported-by: Brad Smith
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1471249494-17392-1-git-send-email-thuth@redhat.com
Buglink: https://bugs.launchpad.net/qemu/+bug/1613133
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but
they keep coming back. checkpatch.pl tries to flag them since commit
5d596c2, but it's not very good at it. Offenders tracked down with
Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated
version of the script from commit 312fd5f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
They look like fe80::%eth0
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
Changes since last submission:
- fix windows build
This makes get_dns_addr address family-agnostic, thus allowing to add the
IPv6 case.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Separate get_dns_addr into get_dns_addr_cached and get_dns_addr_resolv_conf
to make conversion to IPv6 easier.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Samuel Thibault pointed out that it's possible that slirp_pollfds_poll()
will try to use a socket even after soread() returns an error, resulting
in an use-after-free if the socket was removed while handling the error.
Avoid this by refusing to continue to work with the socket in this case.
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
While adding the IPv6 support, the commit eae303ff23
("slirp: Make Socket structure IPv6 compatible") changed the format of
the migration stream, without taking into account that we might still
receive an old migration stream layout when upgrading from QEMU version
2.5 (or older) to QEMU 2.6. Currently, QEMU bails out when doing a
migration from QEMU 2.5 to the recent master version when it has
been started with a "-net user,guestfwd=..." network. So let's fix
this by checking the version ID of the migration stream and by using
the old behavior if we've detected version 3 or less.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds parameters to manage some new options in the qemu -net
command.
Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in
argument to the qemu command.
Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3.
Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch adds an IPv6 address to the DNS relay. in6_equal_dns() is
developed using this Slirp attribute.
sotranslate_in/out/accept() are also updated to manage the IPv6 case so the
guest can be able to join the host using one of the Slirp addresses.
For now this only points to localhost. Further development will be needed to
automatically fetch the IPv6 address from resolv.conf, and announce this via
RDNSS.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Basically, this patch adds some switch in various TCP functions to
prepare them for the IPv6 case.
To have something to "switch" in tcp_input() and tcp_respond(), a new
argument is used to give them the sa_family of the addresses they are
working on.
This patch does not include the entailed reindentation, to make proofread
easier. Reindentation is adressed in the following no-op patch.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch factorizes the tcpiphdr structure to put the IPv4 fields in
an union, for addition of version 6 in further patch.
Using some macros, retrocompatibility of the existing code is assured.
This patch also fixes the SLIRP_MSIZE and margin computation in various
functions, and makes them compatible with the new tcpiphdr structure,
whose size will be bigger than sizeof(struct tcphdr) + sizeof(struct ip)
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch adds the functions needed to handle IPv6 packets. ICMPv6 and
NDP headers are implemented.
Slirp is now able to send NDP Router or Neighbor Advertisement when it
receives Router or Neighbor Solicitation. Using a 64bit-sized IPv6
prefix, the guest is now able to perform stateless autoconfiguration
(SLAAC) and to compute its IPv6 address.
This patch adds an ndp_table, mainly inspired by arp_table, to keep an
NDP cache and manage network address resolution.
Slirp regularly sends NDP Neighbor Advertisement, as recommended by the
RFC, to make the guest refresh its route.
This also adds ip6_cksum() to compute ICMPv6 checksums using IPv6
pseudo-header.
Some #define ETH_* are moved upper in slirp.h to make them accessible to
other slirp/*.h
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-10-git-send-email-peter.maydell@linaro.org
This patch replaces foreign and local address/port couples in Socket
structure by 2 sockaddr_storage which can be casted in sockaddr_in.
Direct access to address and port is still possible thanks to some
\#define, so retrocompatibility of the existing code is assured.
The ss_family field of sockaddr_storage is declared after each socket
creation.
The whole structure is also saved/restored when a Qemu session is
saved/restored.
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In if_encap, a switch is added to prepare for the IPv6 case. Some code
is factorized.
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Basically, this patch replaces "arp" by "resolution" every time "arp"
means "mac resolution" and not specifically ARP.
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The zero_ethaddr[] array is never used; delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Do not special-case addresses with zero host part, as we do not
necessarily know how big it is, and the guest can fake them anyway.
Silently avoid having 0.0.0.0 as a destination, however.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
[Edgar: Minor change to subject]
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
These errors don't seem user initiated, so forcibly printing to the
monitor doesn't seem right. Just use error_report.
Drop lprint since it's now unused.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
If slirp needs to emulate tcp timeout, then the timeout value
for mainloop should be more precise, which is determined by
slirp's fasttimo or slowtimo. Achieve this by swap the logic
sequence of slirp_pollfds_fill and slirp_update_timeout.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Each slirp has its own time to caculate timeout.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Slirp uses rfds/wfds/xfds more extensively than other QEMU components.
The rarely-used out-of-band TCP data feature is used. That means we
need the full table of select(2) to g_poll(3) events:
rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR
wfds -> G_IO_OUT | G_IO_ERR
xfds -> G_IO_PRI
I came up with this table by looking at Linux fs/select.c which maps
select(2) to poll(2) internally.
Another detail to watch out for are the global variables that reference
rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and
sofcantsendmore() use these globals to clear fd_set bits. When
sofcantrcvmore() is called, the wfds bit is cleared so that the write
handler will no longer be run for this iteration of the event loop.
This actually seems buggy to me since TCP connections can be half-closed
and we'd still want to handle data in half-duplex fashion. I think the
real intention is to avoid running the read/write handler when the
socket has been fully closed. This is indicated with the SS_NOFDREF
state bit so we now check for it before invoking the TCP write handler.
Note that UDP/ICMP code paths don't care because they are
connectionless.
Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces.
I followed the style of the surrounding code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The slirp glue code uses tabs in some places. Since the next patch will
modify the file, convert tabs to spaces and fix checkpatch.pl issues.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-5-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch will allow the user to include the domain-search option in
replies from the built-in DHCP server. The domain suffixes can be
specified by adding dnssearch= entries to the "-net user" parameter.
[Jan: tiny style adjustments]
Signed-off-by: Klaus Stengel <Klaus.Stengel@asamnet.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
in_addr_t isn't available on mingw32. Just use an unsigned long instead. I
considered typedef'ing in_addr_t on mingw32 but this would potentially be
brittle if mingw32 did introduce the type.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Changes so translation of remote address to the host's ip address in
the virtual network happens for all addresses in the 127.0.0.0/8
network, not just 127.0.0.1.
This fixes so that hostfwd bound to addresses such as 127.0.0.2 works.
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
- remove qemu_calculate_timeout;
- explicitly size timeout to uint32_t;
- introduce slirp_update_timeout;
- pass NULL as timeout argument to select in case timeout is the maximum
value;
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Close & free sockets when shutting down a slirp instance, also release
all buffers.
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
There is now a trivial check on entry of if_start for pending packets,
so we can drop the additional tracking via if_queued.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The expiration timeout must only affect packets that are queued due to
pending ARP resolutions. The old version broke ping e.g.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
In the current implementation, if Slirp tries to send an IP packet to a client
with an unknown hardware address, the packet is simply dropped and an ARP
request is sent (if_encap in slirp/slirp.c).
With this patch, Slirp will send the ARP request, re-queue the packet and try
to send it later. The packet is dropped after one second if the ARP reply is
not received.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds a simple ARP table in Slirp and also adds handling of
gratuitous ARP requests.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Avoid warnings like these by wrapping recv():
CC slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'
Remove also casts used to avoid warnings.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Linux 3.0 gained support for unprivileged ICMP ping sockets. Use this
feature to forward guest pings to the outer world. The host admin has to
set the ping_group_range in order to grant access to those sockets. To
allow ping for the users group (GID 100):
echo 100 100 > /proc/sys/net/ipv4/ping_group_range
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This was done with:
sed -i '/get_clock\>.*rt_clock/s/get_clock\>/get_clock_ms/' \
$(git grep -l 'get_clock\>.*rt_clock' )
sed -i '/new_timer\>.*rt_clock/s/new_timer\>/new_timer_ms/' \
$(git grep -l 'new_timer\>.*rt_clock' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IEEE 802.3 standard requires Ethernet frames to be at least 64 bytes long.
If it is not the case, they will be considered as runt frames, and may be ignored by netcard and/or OS
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
When available, we'd like to be able to access the DeviceState
when registering a savevm. For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
