drive-mirror will bdrv_swap the new BDS named node-name with the one
pointed by replaces when the mirroring is finished.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5a2d2cb screwed up the the value of members device and action,
breaking tests/qemu-iotests/041.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit bcada37 dropped the (up to now undocumented) members type, len,
offset, speed, breaking tests/qemu-iotests/040 and 041.
Restore and document them. This fixes 040, and partially fixes 041.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The old name is misleading in its new usage, so rename it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This drops request handling code from dataplane, and uses code from
hw/block/virtio-blk.c.
It starts to use multiwrite as non-dataplane does.
Dataplane sets VirtIOBlock.complete_request to vring version, and calls
into non-dataplane's process handling. In complete_request_early,
qiov.size is added to vring push length, because it's also called in rw
completion now.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BH must be called in the AioContext of bs. Currently it is only the
main loop, but with coming changes, it could also be a dataplane
IOThread.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
So that dataplane can use virtio_blk_handle_request and
virtio_submit_multiwrite.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio_blk_req_complete will call VirtIOBlock.complete_request() to push
data and notify guest. No functional change.
Later, this will allow dataplane to provide it's own (vring_) version.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make query-blockstats safe for dataplane by acquiring the
BlockDriverState's AioContext. This ensures that the dataplane IOThread
and the main loop's monitor code do not race.
Note the assumption that acquiring the drive's BDS AioContext also
protects ->file and ->backing_hd. This assumption is made by other
aio_context_acquire() callers too.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is only called from block/qapi.c. There is no need to
keep it public.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
out_sg is checked by iov_to_buf below, so it can be dropped.
Add assert and iov_discard_back around in_sg, as the in_sg is handled in
dataplane code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VirtIOBlockReq is allocated in process_request, and freed in command
functions.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The virtio code currently assumes that the outhdr is in its own iovec.
This is not guaranteed by the spec, so we should relax this assumption.
Convert the VirtIOBlockReq.out field to structrue so that we can use
iov_to_buf and then discard the header from the beginning of iovec.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In current virtio spec, inhdr is a single byte, and is unlikely to
change for both functionality and compatibility considerations.
Non-dataplane uses .in, and we are on the way to converge them. So
let's unify it to get cleaner code.
Remove .inhdr and use .in.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Field "inhdr" is added temporarily for a more mechanical change, and
will be dropped in the next commit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since it's set but not used.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer will handle the unaligned request.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will make converging with dataplane code easier.
Add virtio_blk_free_request to handle the freeing of request internal
fields.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For later reusing by dataplane code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In addition to the on-line reporting added in the previous patch, allow
libvirt to query frontend state independently of events.
Libvirt's path to identify the guest agent channel it cares about differs
between the event added in the previous patch and the QMP response field
added here. The event identifies the frontend device, by "id". The
'query-chardev' QMP command identifies the backend device (again by "id").
The association is under libvirt's control.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1080376
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Libvirt wants to know about the guest-side connection state of some
virtio-serial ports (in particular the one(s) assigned to guest agent(s)).
Report such states with a new monitor event.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1080376
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The conversion of events to the QAPI, resulted in the removal of the
docs/qmp/qmp-events.txt file. This was done to avoid having duplicated
information between qmp-events.txt and qapi-event.json.
However, qmp-events.txt contains examples and we're still not sure
how to proper install QAPI docs in the host. To avoid harming users,
it's better to re-add qmp-events.txt for now and deal with the
duplication later.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch improves docs and address small issues in event
callers.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
With rt != r0 on loads, we use rt for scratch. If we need an index
register different from base, we can't use rt, but r0 is usable.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1403843160-30332-1-git-send-email-rth@twiddle.net
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This new argument can be used to specify the node-name of the new mirrored BDS.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On read operations when this parameter is set and some replicas are corrupted
while quorum can be reached quorum will proceed to rewrite the correct version
of the data to fix the corrupted replicas.
This will shine with SSD where the FTL will remap the same block at another
place on rewrite.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the user specifies -nodefaults he can tell us that he doesn't want any
serial ports spawned by default. While we do honor that wish, we still create
device tree entries for those non-existent devices.
Make device tree generation depend on whether the device is actually available.
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently SPAPR PHB keeps track of all allocated MSI (here and below
MSI stands for both MSI and MSIX) interrupt because
XICS used to be unable to reuse interrupts. This is a problem for
dynamic MSI reconfiguration which happens when guest reloads a driver
or performs PCI hotplug. Another problem is that the existing
implementation can enable MSI on 32 devices maximum
(SPAPR_MSIX_MAX_DEVS=32) and there is no good reason for that.
This makes use of new XICS ability to reuse interrupts.
This reorganizes MSI information storage in sPAPRPHBState. Instead of
static array of 32 descriptors (one per a PCI function), this patch adds
a GHashTable when @config_addr is a key and (first_irq, num) pair is
a value. GHashTable can dynamically grow and shrink so the initial limit
of 32 devices is gone.
This changes migration stream as @msi_table was a static array while new
@msi_devs is a dynamic hash table. This adds temporary array which is
used for migration, it is populated in "spapr_pci"::pre_save() callback
and expanded into the hash table in post_load() callback. Since
the destination side does not know the number of MSI-enabled devices
in advance and cannot pre-allocate the temporary array to receive
migration state, this makes use of new VMSTATE_STRUCT_VARRAY_ALLOC macro
which allocates the array automatically.
This resets the MSI configuration space when interrupts are released by
the ibm,change-msi RTAS call.
This fixed traces to be more informative.
This changes vmstate_spapr_pci_msi name from "...lsi" to "...msi" which
was incorrect by accident. As the internal representation changed,
thus bumps migration version number.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: drop g_malloc_n usage]
Signed-off-by: Alexander Graf <agraf@suse.de>
There are few helpers already to support array migration. However they all
require the destination side to preallocate arrays before migration which
is not always possible due to unknown array size as it might be some
sort of dynamic state. One of the examples is an array of MSIX-enabled
devices in SPAPR PHB - this array may vary from 0 to 65536 entries and
its size depends on guest's ability to enable MSIX or do PCI hotplug.
This adds new VMSTATE_VARRAY_STRUCT_ALLOC macro which is pretty similar to
VMSTATE_STRUCT_VARRAY_POINTER_INT32 but it can alloc memory for migratign
array on the destination side.
This defines VMS_ALLOC flag for a field.
This changes vmstate_base_addr() to do the allocation when receiving
migration.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[agraf: drop g_malloc_n usage]
Signed-off-by: Alexander Graf <agraf@suse.de>
This implements interrupt release function so IRQs can be returned back
to the pool for reuse in cases such as PCI hot plug.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This removes @next_irq from sPAPREnvironment which was used in old
IRQ allocator as XICS is now responsible for IRQs and keeps track of
allocated IRQs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current allocator returns IRQ numbers from a pool and does not
support IRQs reuse in any form as it did not keep track of what it
previously returned, it only keeps the last returned IRQ. Some use
cases such as PCI hot(un)plug may require IRQ release and reallocation.
This moves an allocator from SPAPR to XICS.
This switches IRQ users to use new API.
This uses LSI/MSI flags to know if interrupt is allocated.
The interrupt release function will be posted as a separate patch.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since islsi[] array has been merged into the ICSState struct,
we must not reset flags as they tell if the interrupt is in use.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR allows having multiple interrupt sources such as PHB.
This adds a source lookup function and makes use of it.
Since at the moment QEMU only supports a single source,
no change in behaviour is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The existing interrupt allocation scheme in SPAPR assumes that
interrupts are allocated at the start time, continously and the config
will not change. However, there are cases when this is not going to work
such as:
1. migration - we will have to have an ability to choose interrupt
numbers for devices in the command line and this will create gaps in
interrupt space.
2. PCI hotplug - interrupts from unplugged device need to be returned
back to interrupt pool, otherwise we will quickly run out of interrupts.
This replaces a separate lslsi[] array with a byte in the ICSIRQState
struct and defines "LSI" and "MSI" flags. Neither of these flags set
signals that the descriptor is not allocated and not in use.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add support for the SPLPAR Characteristics parameter to the emulated
RTAS call ibm,get-system-parameter.
The support provides just enough information to allow "cat
/proc/powerpc/lparcfg" to succeed without generating a kernel error
message.
Without this patch the above command will produce the following kernel
message: arch/powerpc/platforms/pseries/lparcfg.c \
parse_system_parameter_string Error calling get-system-parameter \
(0xfffffffd)
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add support for the UUID parameter to the emulated RTAS call
ibm,get-system-parameter.
Return the guest's UUID as the value for the RTAS UUID system
parameter, or null (a zero length result) if it is not set.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows the ibm,get-system-parameter RTAS call to succeed for the
DIAGNOSTICS_RUN_MODE system parameter.
The problem can be seen with "ppc64_cpu --run-mode" from the
powerpc-utils package which fails before this patch with "Machine does
not support diagnostic run mode".
This is corrected by using the rtas_st_buffer() function to write to
the buffer.
The RTAS constants are also moved out into a header file, some new
constants added and the surrounding code slightly simplified.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[agraf: remove some commentary]
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a function to write lengh + data into a buffer as required for the
emulation of the RTAS ibm,get-system-parameter call.
If the destination is smaller than the source, the write is truncated
and success is returned. This matches the behaviour of pHyp.
This will be used in following patches.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds a v2.1 machine to support backward compatibility
for newer macines in the case if they ever be implemented.
This adds a "pseries-2.1" machine as a child of the "pseries"
machine and only changes visible machine name.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Every single sPAPR QOM object has small first "s".
Most (not all yet) QOM objects have "State" suffix.
This replaces SPAPRMachine with sPAPRMachineState to conform with QEMU
code style and removes redundant empty line.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment QEMU knows about one version of POWER8 CPU with
PVR 0x4B.0000. This CPU class is defined as "POWER8". The linux
kernel names it as "POWER8E" which is different from the name QEMU uses.
Now we get another version of POWER8 which is architecturally equivalent
to POWER8E but has different PVR 0x4D.0000 so QEMU fails to find
a PPC CPU class on these machines. The linux kernel names these CPUs as
"POWER8".
This renames the existing "POWER8" to "POWER8E" to be more precise and
stay in sync with the linux kernel.
This adds a new "POWER8" family which calls POWER8E class init function
and defines own PVR mask (used to match a CPU class) and desc (used to
create dynamic version-less CPU class).
This does not change CPU class fw_name attribute as the host POWER8
firmware keeps using "PowerPC,POWER8" on both POWER8 and POWER8E.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix PCI hole size to match that what is found on real hardware.
(OpenBIOS already uses the correct length.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexander Graf <agraf@suse.de>
Change the order of creating devices for New World Mac emulation so
that devices on the motherboard are added first and PCI cards (VGA and
NIC) come later. As a side effect, this also causes OpenBIOS to map
the motherboard devices into the MMIO space to the same addresses as
on real hardware and allow clients that hardcode these addresses (e.g.
MorphOS) to find and use them until OpenBIOS is tought to map devices
to specific addresses. (On real hardware the graphics and network
cards are really on separate buses but we don't model that yet.) This
brings the memory map closer to what is found on PowerMac3,1.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexander Graf <agraf@suse.de>
The gen_qemu_ld8s() function is unused; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Remove the definition of the IMM and d extract helpers; these seem to have
been added as part of the initial PPC support in 2003 but never actually
used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Benoît Canet
Markus Armbruster
Fam Zheng
Stefan Hajnoczi
Laszlo Ersek
Luiz Capitulino
Wenchao Xia
Richard Henderson
Alexander Graf
Alexey Kardashevskiy
Sam bobroff
BALATON Zoltan
Peter Maydell