Commit Graph

507 Commits

Author SHA1 Message Date
Kevin Wolf 74fe54f2a1 block: Allow "driver" option on the top level
This is traditionally -drive format=..., which is now translated into
the new driver option. This gives us a more consistent way to select the
driver of BlockDriverStates that can be used in QMP context, too.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-07-26 21:10:11 +02:00
Peter Lieven 4e7395e84f block: fix bdrv_read_unthrottled()
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19 12:29:22 +08:00
Peter Lieven 4105eaaab9 block: add bdrv_write_zeroes()
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19 12:29:21 +08:00
Kevin Wolf f0f0fdfeec block: Add return value for bdrv_flush_all()
bdrv_flush() can fail, and bdrv_flush_all() should return an error as
well if this happens for a block device. It returns the first error
return now, but still at least tries to flush the remaining devices even
in error cases.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-15 09:51:27 +02:00
Kevin Wolf 98289620e0 block: Don't parse protocol from file.filename
One of the major reasons for doing something new for -blockdev and
blockdev-add was that the old block layer code parses filenames instead
of just taking them literally. So we should really leave it untouched
when it's passing using the new interfaces (like -drive
file.filename=...).

This allows opening relative file names that contain a colon.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-07-15 09:49:00 +02:00
Stefan Hajnoczi 58fda173e1 block: fix bdrv_flush() ordering in bdrv_close()
Since 80ccf93b we flush the block device during close.  The
bdrv_drain_all() call should come before bdrv_flush() to ensure guest
write requests have completed.  Otherwise we may miss pending writes
when flushing.

Call bdrv_drain_all() again for safety as the final step after
bdrv_flush().  This should not be necessary but we can be paranoid here
in case bdrv_flush() left I/O pending.

Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2013-07-05 10:52:23 +02:00
Peter Lieven 3ac216270a block: change default of .has_zero_init to 0
.has_zero_init defaults to 1 for all formats and protocols.

this is a dangerous default since this means that all
new added drivers need to manually overwrite it to 0 if
they do not ensure that a device is zero initialized
after bdrv_create().

if a driver needs to explicitly set this value to
1 its easier to verify the correctness in the review process.

during review of the existing drivers it turned out
that ssh and gluster had a wrong default of 1.
both protocols support host_devices as backend
which are not by default zero initialized. this
wrong assumption will lead to possible corruption
if qemu-img convert is used to write to such a backend.

vpc and vmdk also defaulted to 1 altough they support
fixed respectively flat extends. this has to be addresses
in separate patches. both formats as well as the mentioned
ssh and gluster are turned to the default of 0 with this
patch for safety.

a similar problem with the wrong default existed for
iscsi most likely because the driver developer did
oversee the default value of 1.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 13:52:35 +02:00
Stefan Hajnoczi d616b22474 block: add bdrv_add_before_write_notifier()
The bdrv_add_before_write_notifier() function installs a callback that
is invoked before a write request is processed.  This will be used to
implement copy-on-write point-in-time snapshots where we need to copy
out old data before overwriting it.

Note that BdrvTrackedRequest is moved to block_int.h since it is passed
to .notify() functions.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 09:20:26 +02:00
Kevin Wolf 50b05b6f2e block: Always enable discard on the protocol level
Turning on discard options in qcow2 doesn't help a lot when the discard
requests that it issues are thrown away by the raw-posix layer. This
patch always enables discard functionality on the protocol level so that
it's the image format's responsibility to send (or not) discard
requests. Requests sent by the guest will be allowed or ignored by the
top level BlockDriverState, which depends on the discard=... option like
before.

In particular, this means that even without specifying options, the
qcow2 default of discarding deleted snapshots actually takes effect now,
both for qemu and qemu-img.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-24 10:25:17 +02:00
Luiz Capitulino d8b6895f7a block: bdrv_reopen_prepare(): don't use QERR_OPEN_FILE_FAILED
The call to drv->bdrv_reopen_prepare() can fail due to reasons
other than an open failure. Unfortunately, we can't use errno
nor -ret, cause they are not always set.

Stick to a generic error message then.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
2013-06-17 11:01:14 -04:00
Kevin Wolf bf736fe34c blkdebug: Add BLKDBG_FLUSH_TO_OS/DISK events
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06 11:27:22 +02:00
Wenchao Xia f364ec65b5 block: move qmp and info dump related code to block/qapi.c
This patch is a pure code move patch, except following modification:
1 get_human_readable_size() is changed to static function.
2 dump_human_image_info() is renamed to bdrv_image_info_dump().
3 in qmp_query_block() and qmp_query_blockstats, use bdrv_next(bs)
instead of direct traverse of global array 'bdrv_states'.
4 collect_snapshots() and collect_image_info() are renamed, unused parameter
*fmt in collect_image_info() is removed.
5 code style fix.

To avoid conflict and tip better, macro in header file is BLOCK_QAPI_H
instead of QAPI_H. Now block.h and snapshot.h are at the same level in
include path, block_int.h and qapi.h will both include them.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04 13:56:30 +02:00
Wenchao Xia de08c606f9 block: move snapshot code in block.c to block/snapshot.c
All snapshot related code, except bdrv_snapshot_dump() and
bdrv_is_snapshot(), is moved to block/snapshot.c. bdrv_snapshot_dump()
will be moved to another file later. bdrv_is_snapshot() is not related
with internal snapshot. It also fixes small code style errors reported
by check script.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04 13:56:30 +02:00
Stefan Hajnoczi 29d782710f block: drop bs_snapshots global variable
The bs_snapshots global variable points to the BlockDriverState which
will be used to save vmstate.  This is really a savevm.c concept but was
moved into block.c:bdrv_snapshots() when it became clear that hotplug
could result in a dangling pointer.

While auditing the block layer's global state I came upon bs_snapshots
and realized that a variable is not necessary here.  Simply find the
first BlockDriverState capable of internal snapshots each time this is
needed.

The behavior of bdrv_snapshots() is preserved across hotplug because new
drives are always appended to the bdrv_states list.  This means that
calling the new find_vmstate_bs() function is idempotent - it returns
the same BlockDriverState unless it was hot-unplugged.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04 13:56:29 +02:00
Fam Zheng b64ec4e4ad block: add block driver read only whitelist
We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.

Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.

E.g. To include vmdk readonly, and others read+write:
    ./configure --target-list=x86_64-softmmu \
                --block-drv-rw-whitelist=qcow2,raw,file,qed \
                --block-drv-ro-whitelist=vmdk

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04 12:11:58 +02:00
Kevin Wolf f3f4d2c09b block: Add hint to -EFBIG error message
The limit of qcow2 files at least depends on the cluster size. If the
image format has a cluster_size option, suggest to increase it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-14 16:44:33 +02:00
Kevin Wolf 456736710d block: Fix build with tracing enabled
filename was still uninitialised when it's used as a parameter to a
tracing function, so let's move the initialisation. Also, commit c2ad1b0c
forgot to add a NULL check, which this patch adds while we're at it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1366645720-11384-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22 11:31:41 -05:00
Kevin Wolf 1cb6f50644 block: Allow overriding backing.file.filename
If a filename is passed in the driver-specific options from the command
line, the backing file path from the image is ignored now.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22 11:37:12 +02:00
Kevin Wolf 56d1b4d21d block: Remove filename parameter from .bdrv_file_open()
It is unused now in all block drivers.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22 11:34:35 +02:00
Kevin Wolf 035fccdf79 block: Enable filename option
This allows using the file.filename option instead of the string that
comes from -drive file=... and is passed around as a separate parameter.
The goal is to get rid of this parameter and use the options QDict more
consistently.

With this option you can access not only the top-level image, but
specify a filename for the backing file (currently only if no backing
file exists, but we'll allow overriding it later)

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22 10:27:59 +02:00
Kevin Wolf 31ca6d077c block: Add driver-specific options for backing files
Options starting in "backing." are passed to the backing file now. If
you don't need to specify the filename for the backing file, you can add
it on the command line instead of in the image file:

$ qemu-nbd -t /tmp/test.img
$ qemu-img create -f qcow2 empty.qcow2 1G
$ qemu-system-x86_64 -drive file=empty.qcow2,backing.file.driver=nbd,\
    backing.file.host=localhost

Note that this doesn't override the backing filename from the image. If
the image has one, this will fail because NBD doesn't want the options
and a filename at the same time.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22 10:27:59 +02:00
Kevin Wolf 2af5ef70af block: Fail gracefully when using a format driver on protocol level
Specifying the wrong driver could fail an assertion:

$ qemu-system-x86_64 -drive file.driver=qcow2,file=x
qemu-system-x86_64: block.c:721: bdrv_open_common: Assertion `file !=
((void *)0)' failed.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-22 10:27:59 +02:00
Kevin Wolf 8d3b1a2d0b block: Introduce bdrv_pwritev() for qcow2_save_vmstate
Directly pass the QEMUIOVector on instead of linearising it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-15 08:26:18 +02:00
Kevin Wolf cf8074b382 block: Introduce bdrv_writev_vmstate
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-15 08:26:18 +02:00
Stefan Hajnoczi 0775437faf block: clean up I/O throttling wait_time code
The wait_time variable is in seconds.  Reflect this in a comment and use
NANOSECONDS_PER_SECOND instead of BLOCK_IO_SLICE_TIME * 10 (which
happens to have the right value).

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-05 18:58:05 +02:00
Stefan Hajnoczi e660fb8b3c block: drop duplicated slice extension code
The current slice is extended when an I/O request exceeds the limit.
There is no need to extend the slice every time we check a request.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-05 18:58:05 +02:00
Stefan Hajnoczi ae29d6c64b block: keep I/O throttling slice time constant
It is not necessary to adjust the slice time at runtime.  We already
extend the current slice in order to carry over accounting into the next
slice.  Changing the actual slice time value introduces oscillations.

The guest may experience large changes in throughput or IOPS from one
moment to the next when slice times are adjusted.

Reported-by: Benoît Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-05 18:58:05 +02:00
Stefan Hajnoczi 5905fbc9c9 block: fix I/O throttling accounting blind spot
I/O throttling relies on bdrv_acct_done() which is called when a request
completes.  This leaves a blind spot since we only charge for completed
requests, not submitted requests.

For example, if there is 1 operation remaining in this time slice the
guest could submit 3 operations and they will all be submitted
successfully since they don't actually get accounted for until they
complete.

Originally we probably thought this is okay since the requests will be
accounted when the time slice is extended.  In practice it causes
fluctuations since the guest can exceed its I/O limit and it will be
punished for this later on.

Account for I/O upon submission so that I/O limits are enforced
properly.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-05 18:58:05 +02:00
Kevin Wolf 5d186eb03e block: Fix direct use of protocols as driver for bdrv_open()
bdrv_open_common() implements direct use of protocols by copying the
pre-opened BlockDriverStates to bs using bdrv_swap(). It did however
first set some fields in bs, which end up in file after the swap. When
bdrv_open() destroys file, it appears to be open, and because it isn't,
qemu could segfault while trying to close it.

Reorder the operations to return immediately in such cases so that file
is correctly detected as closed.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28 11:58:40 +01:00
Kevin Wolf c2ad1b0c46 block: Allow omitting the file name when using driver-specific options
After this patch, using -drive with an empty file name continues to open
the file if driver-specific options are used. If no driver-specific
options are specified, the semantics stay as it was: It defines a drive
without an inserted medium.

In order to achieve this, bdrv_open() must be made safe to work with a
NULL filename parameter. The assumption that is made is that only block
drivers which implement bdrv_parse_filename() support using driver
specific options and could therefore work without a filename. These
drivers must make sure to cope with NULL in their implementation of
.bdrv_open() (this is only NBD for now). For all other drivers, the
block layer code will make sure to error out before calling into their
code - they can't possibly work without a filename.

Now an NBD connection can be opened like this:

  qemu-system-x86_64 -drive file.driver=nbd,file.port=1234,file.host=::1

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22 17:51:32 +01:00
Kevin Wolf 08b392e151 block: Rename variable to avoid shadowing
bdrv_open() uses two different variables called options. Rename one of
them to avoid confusion and to allow the outer one to be accessed
everywhere.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22 17:51:32 +01:00
Kevin Wolf 6963a30d82 block: Introduce .bdrv_parse_filename callback
If a driver needs structured data and not just a string, it can provide
a .bdrv_parse_filename callback now that parses the command line string
into separate options. Keeping this separate from .bdrv_open_filename
ensures that the preferred way of directly specifying the options always
works as well if parsing the string works.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22 17:51:32 +01:00
Kevin Wolf 707ff8282b block: Pass bdrv_file_open() options to block drivers
Specify -drive file.option=... on the command line to pass the option to
the protocol instead of the format driver.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22 17:51:31 +01:00
Kevin Wolf 787e4a8500 block: Add options QDict to bdrv_file_open() prototypes
The new parameter is unused yet.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22 17:51:31 +01:00
Peter Lieven 5c916681ae Revert "block: complete all IOs before .bdrv_truncate"
brdv_truncate() is also called from readv/writev commands on self-
growing file based storage. this will result in requests waiting
for theirselves to complete.

This reverts commit 9a665b2b86.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-03-22 17:51:31 +01:00
Stefan Hajnoczi 4d70655bcb block: fix BDRV_O_SNAPSHOT protocol detection
realpath(3) is used to get an absolute path to the image file when
creating a -drive snapshot=on temporary qcow2.  This does not work for
protocols since their filenames ("proto:foo:...") do not correspond to
file system paths.

Commit 7c96d46ec2 ("Let snapshot work with
protocols") skipped realpath(3) for protocols.  Later on the "raw"
format was introduced and broke the check.

Use path_has_protocol(filename) to decide if this image uses a protocol
or a filename.

Reported-by: Richard Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-03-19 11:48:37 +01:00
Stefan Hajnoczi 85d126f3ee block: add bdrv_get_aio_context()
For now bdrv_get_aio_context() is just a stub that calls
qemu_aio_get_context() since the block layer is currently tied to the
main loop AioContext.

Add the stub now so that the block layer can begin accessing its
AioContext.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-15 16:07:51 +01:00
Kevin Wolf b6ad491a49 block: Add options QDict to bdrv_open_common()
The options are passed down to the block drivers, which are supposed to
remove all options they have processed. Anything that is left over in
the end is an unknown option and results in an error.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-15 16:07:49 +01:00
Kevin Wolf de9c0cec6c block: Add options QDict to bdrv_open() prototype
It doesn't do anything yet except storing the options QDict in the
BlockDriverState.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-15 16:07:49 +01:00
Kevin Wolf 1a86938f04 block: Add options QDict to .bdrv_open()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-15 16:07:49 +01:00
Jeff Cody 272d2d8e12 block: for HMP commit() operations on 'all', skip non-COW drives
During a commit of 'all' using the HMP non-live commit, the operation
is aborted and returns error on the first error enountered.  When
non-COW drives are in use (e.g. ejected floppy, cdrom, or drives without
a backing parent), that means a commit all will return an error of either
-ENOMEDIUM or -ENOTSUP.  This is not desirable, so for the 'all' commit
case, only attempt the commit if both bs->drv and bs->backing_hd are
present.

More succinctly: 'commit all' now means a commit on all COW drives.

This means an individual commit to a specific non-COW drive will still
return the appropriate error (-ENOMEDIUM if eject / not present, -ENOTSUP
if no backing file).

Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04 09:54:17 +01:00
Paolo Bonzini 9e8f1835ea block: implement BDRV_O_UNMAP
It is better to present homogeneous hardware independent of the storage
technology that is chosen on the host, hence we make discard a host
parameter; the user can choose whether to pass it down to the image
format and protocol, or to ignore it.

Using DISCARD with filesystems can cause very severe fragmentation, so it
is left default-off for now.  This can change later when we implement the
"anchor" operation for efficient management of preallocated files.

There is still one choice to make: whether DISCARD has an effect on the
dirty bitmap or not.  I chose yes, though there is a disadvantage: if
the guest is buggy and issues discards for data that is in use, there
will be no way to migrate storage for that guest without downgrading
the machine type to an older one.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22 21:29:42 +01:00
Peter Lieven 9a665b2b86 block: complete all IOs before .bdrv_truncate
bdrv_truncate() invalidates the bdrv_check_request() result for
in-flight requests, so there should better be none.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22 21:21:10 +01:00
Miroslav Rezanina f382d43a91 qemu-img: Add "Quiet mode" option
There can be a need to turn output to stdout off. This patch adds a -q option
that enable "Quiet mode". In Quiet mode, only errors are printed out.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22 21:21:09 +01:00
Miroslav Rezanina b35b2bba5b block: Add synchronous wrapper for bdrv_co_is_allocated_above
There's no synchronous wrapper for bdrv_co_is_allocated_above function
so it's not possible to check for sector allocation in an image with
a backing file.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22 21:21:09 +01:00
Vishvananda Ishaya 63ba17d39f block: Fix is_allocated_above with resized files
In an image chain, if the base image is smaller than the current
image, we need to make sure to use the current images count of
unallocated blocks once we get to the end of the base image. Without
this change the code will return 0 blocks when it gets to the end
of the base image and mirror_run will fail its assertion.

Signed-off-by: Vishvananda Ishaya <vishvananda@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01 14:58:28 +01:00
Paolo Bonzini 50717e941b block: allow customizing the granularity of the dirty bitmap
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:34 +01:00
Paolo Bonzini acc906c6c5 block: return count of dirty sectors, not chunks
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:33 +01:00
Paolo Bonzini 343bded4ec block: make round_to_clusters public
This is needed in the following patch.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:33 +01:00
Paolo Bonzini 8f0720ecbc block: implement dirty bitmap using HBitmap
This actually uses the dirty bitmap in the block layer, and converts
mirroring to use an HBitmapIter.

Reviewed-by: Laszlo Ersek <lersek@redhat.com> (except block/mirror.c parts)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:33 +01:00