Commit Graph

107 Commits

Author SHA1 Message Date
Brad e2d8830efc Allow overriding the location of Samba's smbd.
Allow overriding the location of Samba's smbd.

Pretty much every OS I look at has some means of
changing this path (patching) so lets just make
it easier for OS developers creating packages
and/or end users to override the location.

Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03 17:45:48 +00:00
Jan Kiszka 6eed18568d net: Consistently use qemu_macaddr_default_if_unset
Drop the open-coded MAC assignment from net_init_nic and replace it with
standard qemu_macaddr_default_if_unset which is also used by qdev. That
avoid creating colliding MACs when instantiating NICs via different
mechanisms.

This change requires to store the MAC as MACAddr in NICInfo, and the
remaining nd_table users need to be updated.

Based on suggestion by Peter Maydell.

CC: Markus Armbruster <armbru@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 10:19:50 -05:00
Jan Kiszka 6f7b3b1be2 net: Refactor net_client_types
Position entries of net_client_types according to the corresponding
values of NET_CLIENT_TYPE_*. The array size is now defined by
NET_CLIENT_TYPE_MAX. This will allow to obtain entries based on type
value in later patches.

At this chance rename NET_CLIENT_TYPE_SLIRP to NET_CLIENT_TYPE_USER for
the sake of consistency.

CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 10:19:50 -05:00
Peter Maydell 48e2faf222 net: Warn about "-net nic" options which were ignored
Diagnose the case where the user asked for a NIC via "-net nic"
but the board didn't instantiate that NIC (for example where the
user asked for two NICs but the board only supports one). Note
that this diagnostic doesn't apply to NICs created through -device,
because those are always instantiated.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-22 07:18:39 -05:00
Gleb Natapov 1ca4d09ae0 Add bootindex parameter to net/block/fd device
If bootindex is specified on command line a string that describes device
in firmware readable way is added into sorted list. Later this list will
be passed into firmware to control boot order.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 21:32:46 +00:00
Michael S. Tsirkin a083a89d72 net: delay freeing peer host device
With -netdev, virtio devices present offload
features to guest, depending on the backend used.
Thus, removing host netdev peer while guest is
active leads to guest-visible inconsistency and/or crashes.

As a solution, while guest (NIC) peer device exists,
we prevent the host peer from being deleted.
This patch does this by adding peer_deleted flag in nic state:
if host device is going away while guest device
is around, set this flag and keep a shell of
the host device around for as long as guest device exists.

The link is put down so all packets will get discarded.

At the moment, management can detect that device deletion
is delayed by doing info net. As a next step, we shall add
commands that control hotplug/unplug without
removing the device, and an event to report that
guest has responded to the hotplug event.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
2010-10-06 18:24:37 +02:00
Paul Brook 11165820d1 Move stdbool.h
Move inclusion of stdbool.h to common header files, instead of including
in an ad-hoc manner.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-06-13 19:00:50 +01:00
Markus Armbruster 5369e3c0b8 monitor: Convert do_set_link() to QObject, QError
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18 23:55:19 +02:00
Markus Armbruster ae82d3242d monitor: New commands netdev_add, netdev_del
Monitor commands to go with -netdev.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18 23:55:16 +02:00
Eduardo Habkost da1fcfda59 net: remove broken net_set_boot_mask() boot device validation
There are many problems with net_set_boot_mask():

1) It is broken when using the device model instead of "-net nic". Example:
   $ qemu-system-x86_64 -device rtl8139,vlan=0,id=net0,mac=52:54:00:82:41:fd,bus=pci.0,addr=0x4 -net user,vlan=0,name=hostnet0 -vnc 0.0.0.0:0 -boot n
   Cannot boot from non-existent NIC
   $
2) The mask was previously used to set which boot ROMs were supposed to be
   loaded, but this was changed long time ago. Now all ROM images are loaded,
   and SeaBIOS takes care of jumping to the right boot entry point depending on
   the boot settings.
3) Interpretation and validation of the boot parameter letters is done on
   the machine type code. Examples: PC accepts only a,b,c,d,n as valid boot
   device letters. mac99 accepts only a,b,c,d,e,f.

As a side-effect of this change, qemu-kvm won't abort anymore if using "-boot n"
on a machine with no network devices. Checking if the requested boot device is
valid is now a task for the BIOS or the machine-type code.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-10 02:09:55 +02:00
Eduardo Habkost c2564608a1 net: remove NICInfo.bootable field
It is just set by net_set_boot_mask() and never used. The logic for rom loading
changed a lot since this field was introduced. It is not needed anymore.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-10 02:09:48 +02:00
Amit Shah 75422b0d38 qdev: Add a DEV_NVECTORS_UNSPECIFIED enum for unspecified nr of MSI vectors
net.c used a constant to signify no MSI vectors were specified. Extend
that to all qdev devices.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08 11:30:09 -06:00
Markus Armbruster 62112d181c net: Fix bogus "Warning: vlan 0 with no nics" with -device
net_check_clients() prints this when an VLAN has host devices, but no
guest devices.  It uses VLANState members nb_guest_devs and
nb_host_devs to keep track of these devices.  However, -device does
not update nb_guest_devs, only net_init_nic() does that, for -net nic.

Check the VLAN clients directly, and remove the counters.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19 12:12:46 -06:00
Markus Armbruster 668680f75f net: net_check_clients() runs too early to see -device, fix
Call it right after -device devices get created.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19 12:12:46 -06:00
Markus Armbruster 7f76abe1c9 net: Remove unused net_client_uninit()
Unused since commit 9ad4531e.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19 12:12:46 -06:00
Michael S. Tsirkin ceb696159d net: add API to disable/enable polling
When vhost is bound to a backend device, we need to stop polling it when
vhost is started, and restart polling when vhost is stopped.
Add an API for that for use by vhost, and implement in tap backend.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-08 09:58:40 -06:00
Gerd Hoffmann cb4522ccf6 default devices: network
Add a default_net variable which specified whenever a default network
should be created.  It is cleared in case any -net option is specified
and it is also added to the new -nodefaults switch.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:43 -06:00
Mark McLoughlin 57f9ef173d net: add qemu_foreach_nic()
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 09:41:35 -06:00
Mark McLoughlin 665a3b071d net: remove VLANClientState members now in NetClientInfo
Add a NetClientInfo pointer to VLANClientState and use that
for the typecode and function pointers.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 09:41:34 -06:00
Mark McLoughlin 68da46eeb6 net: remove qemu_new_vlan_client()
... and VLANClientState::opaque and qemu_find_vlan_client().

All of these are now unused

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 09:41:34 -06:00
Mark McLoughlin ebef2c093e net: introduce NICState and qemu_new_nic()
Common state for all NICs.

The opaque member will replace the opaque member in VLANClientState
since only NICs need it.

The conf member will allow us to iterate over NICs, access the MAC
addr for the NIC and send a packet from each NIC in qemu_announce_self().

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 09:41:30 -06:00
Mark McLoughlin 45460d1a53 net: introduce qemu_new_net_client()
A replacement for qemu_new_vlan_client(), using NetClientInfo to
replace most arguments.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 09:41:29 -06:00
Mark McLoughlin 3ed79cc949 net: introduce NetClientInfo
This structure holds data which is common to all instances of a given
net client type/model.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 09:41:29 -06:00
Mark McLoughlin b50a3a21ca net: remove NICInfo::private
Was used by hot-unplug, but not anymore.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 09:41:29 -06:00
Mark McLoughlin e13b10be5c net: remove NICInfo::vc
Since 1cc33683, this field is not set for most devices, so just
remove it and its remaining few uses.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 09:41:28 -06:00
Mark McLoughlin 68ac40d2c6 net: move slirp code from net.c to net/slirp.c
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 09:41:27 -06:00
Mark McLoughlin 893379efd0 net: disable receiving if client returns zero
If a receiver returns zero, that means its queue is full and it will
notify us when room is available using qemu_flush_queued_packets().

Take note of that and disable that receiver until it flushes its queue.

This is a first step towards allowing can_receive() handlers to return
true even if no buffer space is available.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:02 -06:00
Mark McLoughlin 5281d757ef net: split all the tap code out into net/tap.c
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30 08:39:27 -05:00
Mark McLoughlin a8ed73f73d net: move more stuff into net/tap-win32.c, add net/tap.h
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30 08:39:27 -05:00
Mark McLoughlin 7200ac3c7c net: move net-checksum.c under net/
Also add a new net/checksum.h header

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30 08:39:26 -05:00
Mark McLoughlin e1144d006d net: move net-queue.[ch] under net/
[v2: handle building in a separate dir]

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30 08:39:26 -05:00
Anthony Liguori 9f09204064 really fix net.h
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:29:05 -05:00
Anthony Liguori a7f085c6e0 Fix signature of new_vlan_client
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:29:05 -05:00
Sridhar Samudrala 6c9f58ba3b Enable UFO on virtio-net and tap devices
Enable UFO on the host tap device if supported and allow setting UFO
on virtio-net in the guest.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:29:04 -05:00
Mark McLoughlin b1c28b464d net: add tap_set_offload()
This API allows virtio-net to enable various offload features on a
tap interface - e.g. to tell the host kernel it can pass up partial
checksums to userspace.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:29:02 -05:00
Mark McLoughlin 70783b9c9b net: add receive_raw parameter to qemu_new_vlan_client()
Trivial patch to allow supplying a receive_raw function.

A future cleanup should combine this function pointer parameters into a
table.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:29:01 -05:00
Mark McLoughlin ca77d17591 net: add an API for 'raw' packets
In the case where a NIC and backend agree on a packet header format,
this API allows injecting packets which lack the agreed upon header.

We need this for sending our gratuitous ARP.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:29:01 -05:00
Mark McLoughlin 24e323631a net: add tap_has_vnet_hdr() and tap_using_vnet_hdr() APIs
These lamely named functions allow virtio-net to query whether
IFF_VNET_HDR is enabled on a tap interface and inform the tap code
that virtio-net will supply packets with a vnet header.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:29:00 -05:00
Mark McLoughlin bb6e636443 net: add a client type code
This is so as to allow APIs which operate on specific client types
without having to add a function table entry which is only implemented
by a single client type.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:29:00 -05:00
Gerd Hoffmann 1cc33683c8 zap DeviceState->nd
No users left.
Also cleanup obsolete helper functions.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:41 -05:00
Gerd Hoffmann ed16ab5afa qdev/net: common nic property bits
Add a new type for properties common to all nics.
Add helper functions and macros to deal with it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:38 -05:00
Gerd Hoffmann 2ef924b416 qdev: add netdev property
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:37 -05:00
Gerd Hoffmann 76d32cba7e net: add macaddr type.
Add new type for mac addresses.

Add function which sets the qemu default mac address if it finds the mac
address uninitialized (i.e. all zeros).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:36 -05:00
Mark McLoughlin 9a6ecb308b net: add queue for peer-to-peer packet forwarding
Now that we have re-factored the packet queue code, we can re-use
it for peer-to-peer also.

Patchworks-ID: 35520
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:03 -05:00
Mark McLoughlin f710584399 net: refactor packet queueing code
The packet queue code is fairly standalone, has some complex details and
easily reusable. It makes sense to split it out on its own. This patch
doesn't contain any functional changes.

Patchworks-ID: 35511
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:03 -05:00
Mark McLoughlin 283c7c63f5 net: allow NICs to be connected to netdevs
Introduce a 'peer' member to VLANClientState as an alternative
to a vlan. The idea being that packets are transfered directly
from peer clients rather than going through a vlan.

Patchworks-ID: 35516
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:02 -05:00
Mark McLoughlin 5869c4d515 net: add -net nic,netdev= option
Patchworks-ID: 35515
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:02 -05:00
Mark McLoughlin f6b134ac30 net: handle -netdevice options
Same as for -net except for:

- only tap, user, vde and socket types are supported
- the vlan parameter is not allowed
- the name parameter is not allowed but the id parameter is
required

Patchworks-ID: 35517
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:01 -05:00
Mark McLoughlin 7f161aaea6 net: add QemuOptsList arg to net_client_parse()
Patchworks-ID: 35505
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:01 -05:00
Mark McLoughlin 5610c3aaf4 net: use qtailq for vlan and client lists
Patchworks-ID: 35507
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:00 -05:00