The guest will see undefined behavior if it issue not negotiate
commands, bit it is expected somehow.
Simplify code deleting this check.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This entry was duplicated on referenced commit. Removing it.
Fixes: 402378407d ("vhost-vdpa: multiqueue support")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If the net tap initializes successful, but failed during
network card hot-plugging, the net-tap will remains,
so cleanup.
Signed-off-by: lu zhipeng <luzhipeng@cestc.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
So we are sure we can update the device model properly before sending to
the device.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Same way as with the MAC, restore the expected number of queues at
device's start.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since there may be many commands we need to issue to load the NIC
state, let's split them in individual functions
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows to simplify the code. Rename to status while we're at it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When enabled the virtio-net-pci, guest network packet will
load the vnet_hdr. In COLO status, the primary VM's network
packet maybe redirect to another VM, it needs filter-redirect
enable the vnet_hdr flag at the same time, COLO-proxy will
correctly parse the original network packet. If have any
misconfiguration here, the vnet_hdr_len is wrong for parse
the packet, the data+offset will point to wrong place.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We can restore the device state in the destination via CVQ now. Remove
the migration blocker.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is needed so the destination vdpa device see the same state a the
guest set in the source.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
So we can reuse it to inject state messages.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
--
v7:
* Remove double free error
v6:
* Do not assume in buffer sent to the device is sizeof(virtio_net_ctrl_ack)
v5:
* Do not use an artificial !NULL VirtQueueElement
* Use only out size instead of iovec dev_buffers for these functions.
Signed-off-by: Jason Wang <jasowang@redhat.com>
As this series will reuse them to restore the device state at the end of
a migration (or a device start), let's allocate only once at the device
start so we don't duplicate their map and unmap.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Next patches will add a new info callback to restore NIC status through
CVQ. Since only the CVQ vhost device is needed, create it with a new
NetClientInfo.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's convenient to call iova_tree_remove from a map returned from
iova_tree_find or iova_tree_find_iova. With the current code this is not
possible, since we will free it, and then we will try to search for it
again.
Fix it making accepting the map by value, forcing a copy of the
argument. Not applying a fixes tag, since there is no use like that at
the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
File descriptor vdpa_device_fd is not free in the case of returning
error from vhost_vdpa_get_features. Fixing it by making all errors go to
the same error path.
Resolves: Coverity CID 1490785
Fixes: 8170ab3f43 ("vdpa: Extract get features part from vhost_vdpa_get_max_queue_pairs")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220802112447.249436-2-eperezma@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When COLO use only one vnet_hdr_support parameter between
filter-redirector and filter-mirror(or colo-compare), COLO will crash
with segmentation fault. Back track as follow:
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x0000555555cb200b in eth_get_l2_hdr_length (p=0x0)
at /home/tao/project/COLO/colo-qemu/include/net/eth.h:296
296 uint16_t proto = be16_to_cpu(PKT_GET_ETH_HDR(p)->h_proto);
(gdb) bt
0 0x0000555555cb200b in eth_get_l2_hdr_length (p=0x0)
at /home/tao/project/COLO/colo-qemu/include/net/eth.h:296
1 0x0000555555cb22b4 in parse_packet_early (pkt=0x555556a44840) at
net/colo.c:49
2 0x0000555555cb2b91 in is_tcp_packet (pkt=0x555556a44840) at
net/filter-rewriter.c:63
So wrong vnet_hdr_len will cause pkt->data become NULL. Add check to
raise error and add trace-events to track vnet_hdr_len.
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter-rewriter no need to track connection in conn_list.
This patch fix the glib g_queue_is_empty assertion when COLO guest
keep a lot of network connection.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We notice the QEMU may crash when the guest has too many
incoming network connections with the following log:
15197@1593578622.668573:colo_proxy_main : colo proxy connection hashtable full, clear it
free(): invalid pointer
[1] 15195 abort (core dumped) qemu-system-x86_64 ....
This is because we create the s->connection_track_table with
g_hash_table_new_full() which is defined as:
GHashTable * g_hash_table_new_full (GHashFunc hash_func,
GEqualFunc key_equal_func,
GDestroyNotify key_destroy_func,
GDestroyNotify value_destroy_func);
The fourth parameter connection_destroy() will be called to free the
memory allocated for all 'Connection' values in the hashtable when
we call g_hash_table_remove_all() in the connection_hashtable_reset().
But both connection_track_table and conn_list reference to the same
conn instance. It will trigger double free in conn_list clear. So this
patch remove free action on hash table side to avoid double free the
conn.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Finally offering the possibility to enable SVQ from the command line.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
To know the device features is needed for CVQ SVQ, so SVQ knows if it
can handle all commands or not. Extract from
vhost_vdpa_get_max_queue_pairs so we can reuse it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Introduce the control virtqueue support for vDPA shadow virtqueue. This
is needed for advanced networking features like rx filtering.
Virtio-net control VQ copies the descriptors to qemu's VA, so we avoid
TOCTOU with the guest's or device's memory every time there is a device
model change. Otherwise, the guest could change the memory content in
the time between qemu and the device read it.
To demonstrate command handling, VIRTIO_NET_F_CTRL_MACADDR is
implemented. If the virtio-net driver changes MAC the virtio-net device
model will be updated with the new one, and a rx filtering change event
will be raised.
More cvq commands could be added here straightforwardly but they have
not been tested.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Do a simple forwarding of CVQ buffers, the same work SVQ could do but
through callbacks. No functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
net/vhost-vdpa.c will need functions that are declared in
vhost-shadow-virtqueue.c, that needs functions of virtio-net.c.
Copy the vhost-vdpa-stub.c code so
only the constructor net_init_vhost_vdpa needs to be defined.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Interaction with vmnet.framework in different modes
differs only on configuration stage, so we can create
common `send`, `receive`, etc. procedures and reuse them.
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Phillip Tennen <phillip@axleos.com>
Signed-off-by: Vladislav Yaroshchuk <Vladislav.Yaroshchuk@jetbrains.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
... such that no memory leaks on dangling net clients in case of
error.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-4-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
libslirp 4.7 introduces a CFI-friendly version of the .timer_new callback.
The new callback replaces the function pointer with an enum; invoking the
callback is done with a new function slirp_handle_timer.
Support the new API so that CFI can be made compatible with using a system
libslirp.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Marc-André Lureau <malureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace slirp_init with slirp_new, so that a more recent cfg.version
can be specified. The function appeared in version 4.1.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This struct will be extended in the next few patches to support the
new slirp_handle_timer() call. For that we need to store an additional
"int" for each SLIRP timer, in addition to the cb_opaque.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Marc-André Lureau <malureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu_*block() functions are meant to be be used with sockets (the
win32 implementation expects SOCKET)
Over time, those functions where used with Win32 SOCKET or
file-descriptors interchangeably. But for portability, they must only be
used with socket-like file-descriptors. FDs can use
g_unix_set_fd_nonblocking() instead.
Rename the functions with "socket" in the name to prevent bad usages.
This is effectively reverting commit f9e8cacc55 ("oslib-posix:
rename socket_set_nonblock() to qemu_set_nonblock()").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Those calls are POSIX-specific. Use the dedicated GLib
API. (qemu_set_nonblock() is for socket-like)
(this is a preliminary patch before renaming qemu_set_nonblock())
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
All uses flush output immediately before or after qemu_log_unlock.
Instead of a separate call, move the flush into qemu_log_unlock.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>
Inside qemu_log, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.
Always check the result of qemu_log_trylock -- only checking
qemu_loglevel_mask races with the acquisition of the lock on
the logfile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>
This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.
To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move qemu_ether_ntoa() which is only needed in net/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The socket API wrappers were initially introduced in commit
00aa0040 ("Wrap recv to avoid warnings"), but made redundant with
commit a2d96af4 ("osdep: add wrappers for socket functions") which fixes
the win32 declarations and thus removed the earlier warnings.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
The IPv6 option headers all have in common that they start with some
common fields, in particular the type of the next header followed by the
extention header length. This is used to traverse the list of the
options. The ESP header does not follow that format, which can break the
IPv6 option header traversal code in eth_parse_ipv6_hdr().
The effect of that is that network interfaces such as vmxnet3 that use
the following call chain
eth_is_ip6_extension_header_type
eth_parse_ipv6_hdr
net_tx_pkt_parse_headers
net_tx_pkt_parse
vmxnet3_process_tx_queue
to send packets from the VM out to the host will drop packets of the
following structure:
Ethernet-Header(IPv6-Header(ESP(encrypted data)))
Note that not all types of network interfaces use the net_tx_pkt_parse
function though, leading to inconsistent behavior regarding sending
those packets. The e1000 network interface for example does not suffer
from this limitation.
By not considering ESP to be an IPv6 header we can allow sending those
packets out to the host on all types of network interfaces.
Fixes: 75020a7021 ("Common definitions for VMWARE devices")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/149
Buglink: https://bugs.launchpad.net/qemu/+bug/1758091
Signed-off-by: Thomas Jansen <mithi@mithi.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch is to improve the logic of QEMU main thread sleep code in
qemu_chr_write_buffer() where it can be blocked and can't run other
coroutines during COLO IO stress test.
Our approach is to put filter_send() in a coroutine. In this way,
filter_send() will call qemu_coroutine_yield() in qemu_co_sleep_ns(),
so that it can be scheduled out and QEMU main thread has opportunity to
run other tasks.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Make the comments consistent with the REGULAR_PACKET_CHECK_MS.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
COLO-compare use the glib function g_queue_find_custom to dump
another VM's networking packet to compare. But this function always
start find from the queue->head(here is the newest packet), It will
reduce the success rate of comparison. So this patch reversed
the order of the queues for performance.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reported-by: leirao <lei.rao@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Match the other error handling in this function.
Fixes: e7b347d0bf ("net: detect errors from probing vnet hdr flag for TAP devices")
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Foley <pefoley@google.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
softmmu/rtc.c defines two public functions: qemu_get_timedate() and
qemu_timedate_diff(). Currently we keep the prototypes for these in
qemu-common.h, but most files don't need them. Move them to their
own header, a new include/sysemu/rtc.h.
Since the C files using these two functions did not need to include
qemu-common.h for any other reason, we can remove those include lines
when we add the include of the new rtc.h.
The license for the .h file follows that of the softmmu/rtc.c
where both the functions are defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Qemu falls back on userland handlers even if vhost-user and vhost-vdpa
cases. These assumes a tap device can handle the packets.
If a vdpa device fail to start, it can trigger a sigsegv because of
that. Add dummy receiver that returns no progress so it can keep
running.
Fixes: 1e0a84ea49 ("vhost-vdpa: introduce vhost-vdpa net client")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211125101614.76927-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The TCP protocol ACK maybe bigger than uint32_t MAX.
At this time, the ACK will reverse to 0. This patch
fix the max_ack and min_ack track issue.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since net_init_vhost_vdpa is trying to open it. Not specifying it in the
command line crash qemu.
Fixes: 7327813d17 ("vhost-vdpa: open device fd in net_init_vhost_vdpa()")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211112193431.2379298-3-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no reason to keep using the old one, since we neither use the
variadics arguments nor open it with O_DIRECT.
Also, net_client_init1, the caller of net_init_vhost_vdpa, wants all
net_client_init_fun to use Error API, so it's a good step in that
direction.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211112193431.2379298-2-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use g_autofree to ensure that `config` is freed when
vhost_vdpa_get_max_queue_pairs() returns.
Reported-by: Coverity (CID 1465228: RESOURCE_LEAK)
Fixes: 402378407d ("vhost-vdpa: multiqueue support")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20211102155157.241034-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Hi
This are the pending migration patches on the list:
- Provide an error message for migration_cancel by Laurent
- Don't dump colo cache when a guest core is requested by Lukas
- Initialise Compression_conters for new migration by Yuxiating
On top of that I added another missing initialization
- Colo optimizations and crash improvements by Rao.
Please, apply.
-----BEGIN PGP SIGNATURE-----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=msYG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration-20211102-pull-request' into staging
Migration Pull request
Hi
This are the pending migration patches on the list:
- Provide an error message for migration_cancel by Laurent
- Don't dump colo cache when a guest core is requested by Lukas
- Initialise Compression_conters for new migration by Yuxiating
On top of that I added another missing initialization
- Colo optimizations and crash improvements by Rao.
Please, apply.
# gpg: Signature made Wed 03 Nov 2021 04:45:35 AM EDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
* remotes/juanquintela/tags/migration-20211102-pull-request:
Optimized the function of fill_connection_key.
colo: Don't dump colo cache if dump-guest-core=off
Changed the last-mode to none of first start COLO
Removed the qemu_fclose() in colo_process_incoming_thread
colo: fixed 'Segmentation fault' when the simplex mode PVM poweroff
Fixed SVM hang when do failover before PVM crash
Fixed qemu crash when guest power off in COLO mode
Some minor optimizations for COLO
migration: Zero migration compression counters
migration: initialise compression_counters for a new migration
migration: provide an error message to migration_cancel()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove some unnecessary code to improve the performance of
the filter-rewriter module.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@trasno.org>
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
And while we're at it, also provide a proper entry for this feature
in meson_options.txt, so that people who don't need it have a knob
to disable this feature.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211028185910.1729744-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements the multiqueue support for vhost-vdpa. This is
done simply by reading the number of queue pairs from the config space
and initialize the datapath and control path net client.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-11-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces a boolean for the device has control queue which
can accepts control command via network queue.
The first user would be the control virtqueue support for vhost.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-6-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch switches to let net_vhost_vdpa_init() to return
NetClientState *. This is used for the callers to allocate multiqueue
NetClientState for multiqueue support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-5-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch switches to open device fd in net_init_vhost_vpda(). This is
used to prepare for the multiqueue support.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-vdpa works only with specific devices. At startup, it second
guesses what the command line option handling will do and error out if
it thinks a non-virtio device will attach to them.
This second guessing is not only ugly, it can lead to wrong error
messages ('-device floppy,netdev=foo' should complain about an unknown
property, not about the wrong kind of network device being attached) and
completely ignores hotplugging.
Drop the old checks and implement .check_peer_type() instead to fix
this. As a nice side effect, it also removes one more dependency on the
legacy QemuOpts infrastructure and even reduces the code size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-4-kwolf@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vhost-user works only with specific devices. At startup, it second
guesses what the command line option handling will do and error out if
it thinks a non-virtio device will attach to them.
This second guessing is not only ugly, it can lead to wrong error
messages ('-device floppy,netdev=foo' should complain about an unknown
property, not about the wrong kind of network device being attached) and
completely ignores hotplugging.
Drop the old checks and implement .check_peer_type() instead to fix
this. As a nice side effect, it also removes one more dependency on the
legacy QemuOpts infrastructure and even reduces the code size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-3-kwolf@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The queue_index of NetClientState should be assigned in set_netdev()
afterwards, so trying to net_vhost_vdpa_init() is meaningless. This
patch removes this.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-12-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Vhost_vdpa_add() can fail for various reasons, so the assertion of the
succeed is wrong. Instead, we should free the NetClientState and
propagate the error to the caller
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-11-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce new error label to avoid the unnecessary checking of net
pointer.
Fixes: 1e0a84ea49 ("vhost-vdpa: introduce vhost-vdpa net client")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-10-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 1e0a84ea49 ("vhost-vdpa: introduce vhost-vdpa net client")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-9-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The previous vhost_net_cleanup is sufficient for freeing, calling
vhost_vdpa_del() in this case will lead an extra round of free. Note
that this kind of "double free" is safe since vhost_dev_cleanup() zero
the whole structure.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-8-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VhostVDPAState is just allocated by qemu_new_net_client() via
g_malloc0() in net_vhost_vdpa_init(). So s->vhost_net is NULL for
sure, let's remove this unnecessary check in vhost_vdpa_add().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-7-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch switches to initialize dev.nvqs from the VhostNetOptions
instead of assuming it was 2. This is useful for implementing control
virtqueue support which will be a single vhost_net structure with a
single cvq.
Note that nvqs is still set to 2 for all users and this patch does not
change functionality.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-6-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"acked_features" is unused, let's remove that.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't currently zero-initialize the 'struct sockaddr_in' that
parse_host_port() fills in, so any fields we don't explicitly
initialize might be left as random garbage. POSIX states that
implementations may define extensions in sockaddr_in, and that those
extensions must not trigger if zero-initialized. So not zero
initializing might result in inadvertently triggering an impdef
extension.
memset() the sockaddr_in before we start to fill it in.
Fixes: Coverity CID 1005338
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210813150506.7768-2-peter.maydell@linaro.org
Since commit 9894dc0cdc "char: convert
from GIOChannel to QIOChannel", the first argument to the watch callback
can actually be a QIOChannel, which is not a GIOChannel (but a QEMU
Object).
Even though we never used that pointer, change the callback type to warn
the users. Possibly a better fix later, we may want to store the
callback and call it from intermediary functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
From clang-13:
../qemu/net/checksum.c:189:23: error: variable 'buf_off' set but not used \
[-Werror,-Wunused-but-set-variable]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The data pointer has skipped vnet_hdr_len in the function of
parse_packet_early().So, we can not subtract vnet_hdr_len again
when calculating pkt->header_size in fill_pkt_tcp_info(). Otherwise,
it will cause network packet comparsion errors and greatly increase
the frequency of checkpoints.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch fixes the following:
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x00007f6ae4559859 in __GI_abort () at abort.c:79
#2 0x0000559aaa386720 in error_exit (err=16, msg=0x559aaa5973d0 <__func__.16227> "qemu_mutex_destroy") at util/qemu-thread-posix.c:36
#3 0x0000559aaa3868c5 in qemu_mutex_destroy (mutex=0x559aabffe828) at util/qemu-thread-posix.c:69
#4 0x0000559aaa2f93a8 in char_finalize (obj=0x559aabffe800) at chardev/char.c:285
#5 0x0000559aaa23318a in object_deinit (obj=0x559aabffe800, type=0x559aabfd7d20) at qom/object.c:606
#6 0x0000559aaa2331b8 in object_deinit (obj=0x559aabffe800, type=0x559aabfd9060) at qom/object.c:610
#7 0x0000559aaa233200 in object_finalize (data=0x559aabffe800) at qom/object.c:620
#8 0x0000559aaa234202 in object_unref (obj=0x559aabffe800) at qom/object.c:1074
#9 0x0000559aaa2356b6 in object_finalize_child_property (obj=0x559aac0dac10, name=0x559aac778760 "compare0-0", opaque=0x559aabffe800) at qom/object.c:1584
#10 0x0000559aaa232f70 in object_property_del_all (obj=0x559aac0dac10) at qom/object.c:557
#11 0x0000559aaa2331ed in object_finalize (data=0x559aac0dac10) at qom/object.c:619
#12 0x0000559aaa234202 in object_unref (obj=0x559aac0dac10) at qom/object.c:1074
#13 0x0000559aaa2356b6 in object_finalize_child_property (obj=0x559aac0c75c0, name=0x559aac0dadc0 "chardevs", opaque=0x559aac0dac10) at qom/object.c:1584
#14 0x0000559aaa233071 in object_property_del_child (obj=0x559aac0c75c0, child=0x559aac0dac10, errp=0x0) at qom/object.c:580
#15 0x0000559aaa233155 in object_unparent (obj=0x559aac0dac10) at qom/object.c:599
#16 0x0000559aaa2fb721 in qemu_chr_cleanup () at chardev/char.c:1159
#17 0x0000559aa9f9b110 in main (argc=54, argv=0x7ffeb62fa998, envp=0x7ffeb62fab50) at vl.c:4539
When chardev is cleaned up, chr_write_lock needs to be destroyed. But
the colo-compare module is not cleaned up normally before it when the
guest poweroff. It is holding chr_write_lock at this time. This will
cause qemu crash.So we add the function of colo_compare_cleanup() before
qemu_chr_cleanup() to fix the bug.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use the packet_new_nocopy instead of packet_new in the
filter-rewriter module. There will be one less memory
copy in the processing of each network packet.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The iov_size has been calculated in filter_send(). we can directly
return the size.In this way, this is no need to repeat calculations
in filter_redirector_receive_iov();
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There is the same trace code in the colo_compare_packet_payload.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When RSS is enabled the device tries to load the eBPF program
to select RX virtqueue in the TUN. If eBPF can be loaded
the RSS will function also with vhost (works with kernel 5.8 and later).
Software RSS is used as a fallback with vhost=off when eBPF can't be loaded
or when hash population requested by the guest.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
For now, that method supported only by Linux TAP.
Linux TAP uses TUNSETSTEERINGEBPF ioctl.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Additional code that will be used for eBPF setting steering routine.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJgrwypAAoJEO8Ells5jWIRDfsIAJyrDUbgDoeg4dM9TEvE+3xr
5Fd52wVozlQhn6zz2ZfEcqVfWNVbVHsVcYnpJQMXOCda5CIl5qZbl2EzS/lBrdkm
f5XUD4lFhwH1pUUugT20lEFYct0dv2UddEmLrEctI+CB5d9bA+SqeDdLAHYbrDIR
jfc/vOrP/1sfvWCsXmZzJ+0UhoGoS8qU2eLx9nwSvan3uLMmLWfWSTUltvwMNvZD
oA6a1O9poV00W89W25tSeMOKKPaS+RZYVFvDd0HzQYRI0t496VxK/Jw0VqfF+iCl
3KBzjhUi7QyFWgQY5xFQcMWwob8McOJOUGX4EQERm8EbHy8VhpugCHinqLPqf38=
=fRpo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 27 May 2021 04:06:17 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap-bsd: Remove special casing for older OpenBSD releases
virtio-net: failover: add missing remove_migration_state_change_notifier()
hw/net/imx_fec: return 0xffff when accessing non-existing PHY
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OpenBSD added support for tap(4) 10 releases ago.
Remove the special casing for older releases.
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Replace Windows specific macro with a more generic feature detection
macro. Allows slirp smb feature to be disabled manually as well.
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20210315180341.31638-5-j@getutm.app>
[Use $default_feature as the default. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
