Commit Graph

300 Commits

Author SHA1 Message Date
Thomas Huth aff39be0ed hw/pci-host: Use object_initialize_child for correct reference counting
Both functions, object_initialize() and object_property_add_child() increase
the reference counter of the new object, so one of the references has to be
dropped afterwards to get the reference counting right. Otherwise the child
object might not be properly cleaned up when the parent gets destroyed.
Some functions of the pci-host devices miss to drop one of the references.
Fix it by using object_initialize_child() instead, which takes care of
calling object_initialize(), object_property_add_child() and object_unref()
in the right order.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190430191552.4027-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-02 16:56:33 +02:00
Peter Maydell 84bdc58c06 * Kconfig improvements (msi_nonbroken, imply for default PCI devices)
* intel-iommu: sharing passthrough FlatViews (Peter)
 * Fix for SEV with VFIO (Brijesh)
 * Allow compilation without CONFIG_PARALLEL (Thomas)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlyTvvAUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNNwwf/RrtjBoqu8Ulu6k+HJczdpkhO44c5
 R7sidGaOBHVjT+EsaYZxanXQlsbpDPiXCRoMRMln+O3Kgso/UlVTLBfctIjuf5kp
 P8Amp8rw843yl3TQ+Xaqat1qtfVVN2xjRDoyRwWrTU5w52MVVsan2j1/XzGX/7Bb
 Y3gXRxsN7MyjDCXxhxVwQCxKU2ue3ytvnfdCnu1SNZxZEaFAyGprTNCCTXYugehl
 bVauAs/0qOZWEyvElinNEz+zbqMTm07ULAWBRXgCDcOudsidZFtu0Xl62dXlp1Ou
 0zkaoGiOdMM6OXZkLd6vOK8mY9XDuqaUZE3zAeFMJsK1wSnZdGUVCJO1Hw==
 =Pkcj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Kconfig improvements (msi_nonbroken, imply for default PCI devices)
* intel-iommu: sharing passthrough FlatViews (Peter)
* Fix for SEV with VFIO (Brijesh)
* Allow compilation without CONFIG_PARALLEL (Thomas)

# gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (23 commits)
  virtio-vga: only enable for specific boards
  config-all-devices.mak: rebuild on reconfigure
  minikconf: fix parser typo
  intel-iommu: optimize nodmar memory regions
  test-announce-self: convert to qgraph
  hw/alpha/Kconfig: DP264 hardware requires e1000 network card
  hw/hppa/Kconfig: Dino board requires e1000 network card
  hw/sh4/Kconfig: r2d machine requires the rtl8139 network card
  hw/ppc/Kconfig: e500 based machines require virtio-net-pci device
  hw/ppc/Kconfig: Bamboo machine requires e1000 network card
  hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices
  hw/mips/Kconfig: Malta machine requires the pcnet network card
  hw/i386/Kconfig: enable devices that can be created by default
  hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI
  hw/isa/Kconfig: i82378 SuperIO requires PC speaker device
  prep: do not select I82374
  hw/i386/Kconfig: PC uses I8257, not I82374
  hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL
  target/i386: sev: Do not pin the ram device memory region
  memory: Fix the memory region type assignment order
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/rdma/Makefile.objs
#	hw/riscv/sifive_plic.c
2019-03-28 09:18:53 +00:00
Markus Armbruster 500016e5db trace-events: Shorten file names in comments
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files.  That's because when trace-events got split up, the
comments were moved verbatim.

Delete the sub/dir/ part from these comments.  Gets rid of several
misspellings.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Paolo Bonzini ca9b7e29de kconfig: add CONFIG_MSI_NONBROKEN
Not all interrupt controllers have a working implementation of
message-signalled interrupts; in some cases, the guest may expect
MSI to work but it won't due to the buggy or lacking emulation.

In QEMU this is represented by the "msi_nonbroken" variable.  This
patch adds a new configuration symbol enabled whenever the binary
contains an interrupt controller that will set "msi_nonbroken".  We
can then use it to remove devices that cannot be possibly added
to the machine, because they require MSI.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-18 09:39:57 +01:00
Thomas Huth d7cfb520cf ppc: Express dependencies of the Mac machines with kconfig
This will make it for example easier if the users want to disable
one of the two machines for their builds.

Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:46:19 +01:00
Paolo Bonzini 02017ee385 i386: express dependencies with Kconfig
This way, the default-configs file only need to specify the boards
and any optional devices.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-37-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini 7c28b925b7 build: convert pci.mak to Kconfig
Instead of including the same list of devices for each target,
set CONFIG_PCI to true, and make the devices default to present
whenever PCI is available.  However, s390x does not want all the
PCI devices, so there is a separate symbol to enable them.

Done mostly with the following script:

  while read i; do
     i=${i%=y}; i=${i#CONFIG_}
     sed -i -e'/^config '$i'$/!b' -en \
            -e'a\' -e'    default y if PCI_DEVICES\' -e'    depends on PCI' \
          `grep -lw $i hw/*/Kconfig`
  done < default-configs/pci.mak

followed by replacing a few "depends on" clauses with "select"
whenever the symbol is not really related to PCI.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-31-yang.zhong@intel.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini 82f5181777 kconfig: introduce kconfig files
The Kconfig files were generated mostly with this script:

  for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
    set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
    shift
    if test $# = 1; then
      cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
    bool

EOF
      git add $(dirname $1)/Kconfig
    else
      echo $i $*
    fi
  done
  sed -i '$d' hw/*/Kconfig
  for i in hw/*; do
    if test -d $i && ! test -f $i/Kconfig; then
      touch $i/Kconfig
      git add $i/Kconfig
    fi
  done

Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.

Kconfig.host and hw/Kconfig were created manually.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
BALATON Zoltan f7cf2219c5 hw/pci-host/bonito.c: Add PCI mem region mapped at the correct address
Stop using system memory as PCI memory otherwise devices such as VGA
that have regions mapped to PCI memory clash with RAM. Use a separate
memory region for PCI memory and map it to the correct address in
system memory which allows PCI mem regions to show at the correct
address where clients expect them.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-21 19:36:47 +01:00
Paolo Bonzini 91b82fec16 build: actually use CONFIG_PAM
Do not link it unconditionally into all binaries.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190202072456.6468-6-yang.zhong@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:19 +01:00
Yang Zhong 5afdd57ca0 hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESS
Change the CONFIGs for PCI EXPRESS and make module name more
clear for code files.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190202072456.6468-5-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:19 +01:00
Liam Merwick 4366e1db16 elf: Add optional function ptr to load_elf() to parse ELF notes
This patch adds an optional function pointer, 'elf_note_fn', to
load_elf() which causes load_elf() to additionally parse any
ELF program headers of type PT_NOTE and check to see if the ELF
Note is of the type specified by the 'translate_opaque' arg.
If a matching ELF Note is found then the specfied function pointer
is called to process the ELF note.

Passing a NULL function pointer results in ELF Notes being skipped.

The first consumer of this functionality is the PVHboot support
which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while
loading the uncompressed kernel binary in order to discover the
boot entry address for the x86/HVM direct boot ABI.

Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:16 +01:00
Paolo Bonzini 4ec37f9048 pam: wrap MemoryRegion initialization in a transaction
This avoids a few re-rendering of the memory AddressSpace.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 13:57:23 +01:00
Peter Maydell 7360be896a ppc patch queue 2018-11-08
Here's another patch of accumulated ppc patches for qemu-3.1.
 Highlights are:
   * Support for nested HV KVM on POWER9 hosts
   * Remove Alex Graf as ppc maintainer
   * Emulation of external PID instructions
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAlvkKKMACgkQbDjKyiDZ
 s5KO3Q/+Ise1jJuTzL1/ga8cTF8wil/C9hJMQKXFtcVDJuCNL+RtIUGS1/zsGB/O
 4Zemp0KxdCOoJKEvtndJSP/2b4++35edXO/u2vSLrtCGnidEnGcgaIBHve3huOPf
 zVtnbvRcNOHUbYC4GwsihqbxFI6hdKmMsR0THjpriCzTQPBjkqQyaK/oHyUFTS/F
 vNiWGxvJjOaFrszt0TSdEFwIcjtIib99zueAkIpIQIVpy65mM9VkL83CmV9ATfxP
 G9ZVWjCNzVSjGGKKArLCOnajaqdpGH8hKPqfTHjBOIapgCXJsDI1/+i1Kh2/H+Fa
 BaWxpR9lkMUQZniOn1oFGNmAKmLZiqAPRt5IeUruzKigfwlnG4gcv8LoZSOcxk/V
 Kh/Odra3dWIgfCcEr8qYp7tJ6+izAxb/iOOM2eHPN2eAejcO8tReyKwLgCxCX6jm
 obBlBocoRY8pEpgXjusgGWTiBwiJkPfx9cjlkvY+hHYeXpUkJiCkTURAWHM8+Nuh
 9ZSqtoKuqSLIpsNi+oLT4qT4I0L14koRGu+ARVe5IpyJO36Ru3PtmnQKxeBm+559
 sfgZiZ6fpJN2nOgKNPcP+kkxVm+W8hj8Uk2VGnl9ZLA7CPVSJaZRwQt0Gths41CC
 tmWcoQeYTCdElkjNQchs9+eoMRPIvs6x+TjgdrhaBg30d3O9kng=
 =NIAZ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20181108' into staging

ppc patch queue 2018-11-08

Here's another patch of accumulated ppc patches for qemu-3.1.
Highlights are:
  * Support for nested HV KVM on POWER9 hosts
  * Remove Alex Graf as ppc maintainer
  * Emulation of external PID instructions

# gpg: Signature made Thu 08 Nov 2018 12:14:27 GMT
# gpg:                using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.1-20181108: (22 commits)
  ppc/spapr_caps: Add SPAPR_CAP_NESTED_KVM_HV
  target/ppc: Add one reg id for ptcr
  This patch fixes processing of rfi instructions in icount mode.
  hw/ppc/ppc440_uc: Remove dead code in sdram_size()
  MAINTAINERS: PPC: Remove myself
  ppc/pnv: check size before data buffer access
  target/ppc: fix mtmsr instruction for icount
  hw/ppc/mac_newworld: Free openpic_irqs array after use
  macio/pmu: Fix missing vmsd terminator
  spapr_pci: convert g_malloc() to g_new()
  target/ppc: Split out float_invalid_cvt
  target/ppc: Split out float_invalid_op_div
  target/ppc: Split out float_invalid_op_mul
  target/ppc: Split out float_invalid_op_addsub
  target/ppc: Introduce fp number classification
  target/ppc: Remove float_check_status
  target/ppc: Split up float_invalid_op_excp
  hw/ppc/spapr_rng: Introduce CONFIG_SPAPR_RNG switch for spapr_rng.c
  PPC: e500: convert SysBus init method to a realize method
  ppc4xx_pci: convert SysBus init method to a realize method
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-08 14:42:37 +00:00
Peter Maydell fa27257432 * icount fix (Clement)
* dumping fixes for non-volatile memory (Marc-André, myself)
 * x86 emulation fix (Rudolf)
 * recent Hyper-V CPUID flag (Vitaly)
 * Q35 doc fix (Daniel)
 * lsi fix (Prasad)
 * SCSI block limits emulation fixes (myself)
 * qemu_thread_atexit rework (Peter)
 * ivshmem memory leak fix (Igor)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJb4gjmAAoJEL/70l94x66DoyMH/07qyzgytC+/B+HLw08Tgmhl
 HDHGY6DHQf7DvaFMUBGg5z38/KjdPcmFowXpYlZ/aZrvxV12E19jzgdmDLQoj+Sg
 dIT7Dr0aRVGvPF51mEr+qRBUU+J9+ly8ugC5Sjo9ZB851z/gzHzW7na0BIv7w4mX
 an9pGrN5huGBfcHE5jBHXooV8pcZujvPvBz0JBKQ+mYGTM+LEkZeeWO7hRcFKZRL
 gRbspoxavWoWi7qkuIAqtejrqdzkllTiQEQSBNWQx3QdkZPe4LYP2wyrvPIvGCnh
 vzszo+nbzgOQnfR1RAUKOUOaoRAUYA7Jjm2izY9yb6O4i29ZrPobvC8gjkFkrL0=
 =M0Rf
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* icount fix (Clement)
* dumping fixes for non-volatile memory (Marc-André, myself)
* x86 emulation fix (Rudolf)
* recent Hyper-V CPUID flag (Vitaly)
* Q35 doc fix (Daniel)
* lsi fix (Prasad)
* SCSI block limits emulation fixes (myself)
* qemu_thread_atexit rework (Peter)
* ivshmem memory leak fix (Igor)

# gpg: Signature made Tue 06 Nov 2018 21:34:30 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  util/qemu-thread-posix: Fix qemu_thread_atexit* for OSX
  include/qemu/thread.h: Document qemu_thread_atexit* API
  scsi-generic: do not do VPD emulation for sense other than ILLEGAL_REQUEST
  scsi-generic: avoid invalid access to struct when emulating block limits
  scsi-generic: avoid out-of-bounds access to VPD page list
  scsi-generic: keep VPD page list sorted
  lsi53c895a: check message length value is valid
  scripts/dump-guest-memory: Synchronize with guest_phys_blocks_region_add
  memory-mapping: skip non-volatile memory regions in GuestPhysBlockList
  nvdimm: set non-volatile on the memory region
  memory: learn about non-volatile memory region
  target/i386: Clear RF on SYSCALL instruction
  MAINTAINERS: remove or downgrade myself to reviewer from some subsystems
  ivshmem: fix memory backend leak
  i386: clarify that the Q35 machine type implements a P35 chipset
  x86: hv_evmcs CPU flag support
  icount: fix deadlock when all cpus are sleeping

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-08 10:01:51 +00:00
Cédric Le Goater 73785b329e PPC: e500: convert SysBus init method to a realize method
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08 12:04:40 +11:00
Daniel P. Berrangé d4715481de i386: clarify that the Q35 machine type implements a P35 chipset
The 'q35' machine type implements an Intel Series 3 chipset,
of which there are several variants:

  https://www.intel.com/Assets/PDF/datasheet/316966.pdf

The key difference between the 82P35 MCH ('p35', PCI device ID 0x29c0)
and 82Q35 GMCH ('q35', PCI device ID 0x29b0) variants is that the latter
has an integrated graphics adapter. QEMU does not implement integrated
graphics, so uses the PCI ID for the 82P35 chipset, despite calling the
machine type 'q35'. Thus we rename the PCI device ID constant to reflect
reality, to avoid confusing future developers. The new name more closely
matches what pci.ids reports it to be:

$ grep  P35 /usr/share/hwdata/pci.ids  | grep 29
	29c0  82G33/G31/P35/P31 Express DRAM Controller
	29c1  82G33/G31/P35/P31 Express PCI Express Root Port
	29c4  82G33/G31/P35/P31 Express MEI Controller
	29c5  82G33/G31/P35/P31 Express MEI Controller
	29c6  82G33/G31/P35/P31 Express PT IDER Controller
	29c7  82G33/G31/P35/P31 Express Serial KT Controller

$ grep  Q35 /usr/share/hwdata/pci.ids  | grep 29
	29b0  82Q35 Express DRAM Controller
	29b1  82Q35 Express PCI Express Root Port
	29b2  82Q35 Express Integrated Graphics Controller
	29b3  82Q35 Express Integrated Graphics Controller
	29b4  82Q35 Express MEI Controller
	29b5  82Q35 Express MEI Controller
	29b6  82Q35 Express PT IDER Controller
	29b7  82Q35 Express Serial KT Controller

Arguably the QEMU machine type should be named 'p35'. At this point in
time, however, it is not worth the churn for management applications &
documentation to worry about renaming it.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180830105757.10577-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-06 21:35:05 +01:00
Li Qiang 9b178f0e80 piix_pci: fix i440fx data sheet link
It seems that the intel link is unavailable, change it to point to the
qemu site.

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Li Qiang ee31e901ef piix: use TYPE_FOO constants than string constats
Make them more QOMConventional.
Cc:qemu-trivial@nongnu.org

Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Li Qiang 0118c01cab i440fx: use ARRAY_SIZE for pam_regions
Cc: qemu-trivial@nongnu.org

Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Laszlo Ersek ed6bb4b581 hw/pci-host/x86: extend the 64-bit PCI hole relative to the fw-assigned base
In commit 9fa99d2519 ("hw/pci-host: Fix x86 Host Bridges 64bit PCI
hole", 2017-11-16), we meant to expose such a 64-bit PCI MMIO aperture in
the ACPI DSDT that would be at least as large as the new "pci-hole64-size"
property (2GB on i440fx, 32GB on q35). The goal was to offer "enough"
64-bit MMIO aperture to the guest OS for hotplug purposes.

In that commit, we added or modified five functions:

- pc_pci_hole64_start(): shared between i440fx and q35. Provides a default
  64-bit base, which starts beyond the cold-plugged 64-bit RAM, and skips
  the DIMM hotplug area too (if any).

- i440fx_pcihost_get_pci_hole64_start(), q35_host_get_pci_hole64_start():
  board-specific 64-bit base property getters called abstractly by the
  ACPI generator. Both of these fall back to pc_pci_hole64_start() if the
  firmware didn't program any 64-bit hole (i.e. if the firmware didn't
  assign a 64-bit GPA to any MMIO BAR on any device). Otherwise, they
  honor the firmware's BAR assignments (i.e., they treat the lowest 64-bit
  GPA programmed by the firmware as the base address for the aperture).

- i440fx_pcihost_get_pci_hole64_end(), q35_host_get_pci_hole64_end():
  these intended to extend the aperture to our size recommendation,
  calculated relative to the base of the aperture.

Despite the original intent, i440fx_pcihost_get_pci_hole64_end() and
q35_host_get_pci_hole64_end() currently only extend the aperture relative
to the default base (pc_pci_hole64_start()), ignoring any programming done
by the firmware. This means that our size recommendation may not be met.
Fix it by honoring the firmware's address assignments.

The strange extension sizes were spotted by Alex, in the log of a guest
kernel running on top of OVMF (which prefers to assign 64-bit GPAs to
64-bit BARs).

This change only affects DSDT generation, therefore no new compat property
is being introduced.

Using an i440fx OVMF guest with 5GB RAM, an example _CRS change is:

> @@ -881,9 +881,9 @@
>              QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
>                  0x0000000000000000, // Granularity
>                  0x0000000800000000, // Range Minimum
> -                0x000000080001C0FF, // Range Maximum
> +                0x000000087FFFFFFF, // Range Maximum
>                  0x0000000000000000, // Translation Offset
> -                0x000000000001C100, // Length
> +                0x0000000080000000, // Length
>                  ,, , AddressRangeMemory, TypeStatic)
>          })
>          Device (GPE0)

(On i440fx, the low RAM split is at 3GB, in this case. Therefore, with 5GB
guest RAM and no DIMM hotplug range, pc_pci_hole64_start() returns 4 +
(5-3) = 6 GB. Adding the 2GB extension to that yields 8GB, which is below
the firmware-programmed base of 32GB, before the patch. Therefore, before
the patch, the extension is ineffective. After the patch, we add the 2GB
extension to the firmware-programmed base, namely 32GB.)

Using a q35 OVMF guest with 5GB RAM, an example _CRS change is:

> @@ -3162,9 +3162,9 @@
>              QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
>                  0x0000000000000000, // Granularity
>                  0x0000000800000000, // Range Minimum
> -                0x00000009BFFFFFFF, // Range Maximum
> +                0x0000000FFFFFFFFF, // Range Maximum
>                  0x0000000000000000, // Translation Offset
> -                0x00000001C0000000, // Length
> +                0x0000000800000000, // Length
>                  ,, , AddressRangeMemory, TypeStatic)
>          })
>          Device (GPE0)

(On Q35, the low RAM split is at 2GB. Therefore, with 5GB guest RAM and no
DIMM hotplug range, pc_pci_hole64_start() returns 4 + (5-2) = 7 GB. Adding
the 32GB extension to that yields 39GB (0x0000_0009_BFFF_FFFF + 1), before
the patch. After the patch, we add the 32GB extension to the
firmware-programmed base, namely 32GB.)

The ACPI test data for the bios-tables-test case that we added earlier in
this series are corrected too, as follows:

> @@ -3339,9 +3339,9 @@
>              QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
>                  0x0000000000000000, // Granularity
>                  0x0000000200000000, // Range Minimum
> -                0x00000009BFFFFFFF, // Range Maximum
> +                0x00000009FFFFFFFF, // Range Maximum
>                  0x0000000000000000, // Translation Offset
> -                0x00000007C0000000, // Length
> +                0x0000000800000000, // Length
>                  ,, , AddressRangeMemory, TypeStatic)
>          })
>          Device (GPE0)

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Fixes: 9fa99d2519
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Laszlo Ersek ccef5b1fcf hw/pci-host/x86: extract get_pci_hole64_start_value() helpers
Expose the calculated "hole64 start" GPAs as plain uint64_t values,
extracting the internals of the current property getters.

This patch doesn't change behavior.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Peter Maydell a2e002ff79 QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
 
 v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
     built in a 32bit debian sid chroot
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJb2D8VAAoJEPMMOL0/L748dZEP/11pPehjPPYVxesxM++pFeuf
 2EOrLuOTkwlRX23itj2JHv8UTY3YZR9Z8kkF3SWe7qYfp4kB4dTEYjnJY5Im6fWQ
 TUbC9D9SivknOOPyQUtGXZQRN8D8m6V4hN2ZcoXC2M48GT23/uqUWBwCKYeHxdLf
 iJQFmhwDnXSZr+D0l9mpMK2vBsZ5ywcbne8GufTtrkz7Dq9A0nDWVc/XUEHzzahf
 C+6r2fRPjtImxIjhAGQeAEzOk5tYnqK/3kXjy6T4UygvnZw0pkAS1rIb3hvlzm1e
 kBlbA+pgL0kKumMmT9LBR4Os4hlL95URUF+BDNGa3EusImSL/wmhsawslQbfxVyv
 5at3VKIdvPXr7GQvmhaJ3dllXiQixX7A+axevkwyZkuIcYLnuhvh6bCR3ap+4mq/
 GRk4vwXStS6S8rDLAzo4GA4DsE4EDYJSnU13wMEaj1L9sYPVg1224AgCjnlIBbQa
 ntGD3lY7+nG5q1BeVfZXmpNZ4+N4TSpu2uEBxNvWY2/YkaouleQXJ8W4eFirB1Eo
 G8TN2fbroLcKgxhOlpvgFrfrgs8T5ZprpqQnvpE2h6M2Nu4JWJq4008q3uIPOwTy
 o9MrquqOjdG0+OBHr8Ji5HwDKex68NRQhl8BYhqtPhi/+XycDo47YSodNBfw2U/Q
 Ec9301/TQjBcvCBLEzrt
 =sHPv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging

QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)

v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
    built in a 32bit debian sid chroot

# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
  milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
  ppc: move at24c to its own CONFIG_ symbol
  hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
  hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
  tests/bios-tables-test: Remove an useless cast
  xen: Use the PCI_DEVICE macro
  qobject: Catch another straggler for use of qdict_put_str()
  configure: Support pkg-config for zlib
  tests: Fix typos in comments and help message (found by codespell)
  cpu.h: fix a typo in comment
  linux-user: fix comment s/atomic_write/atomic_set/
  qemu-iotests: make 218 executable
  scripts/qemu.py: remove trailing quotes on docstring
  scripts/decodetree.py: remove unused imports
  docs/devel/testing.rst: add missing newlines after code block
  qemu-iotests: fix filename containing checks
  tests/tcg/README: fix location for lm32 tests
  memory.h: fix typos in comments
  vga_int: remove unused function protype
  configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-30 15:49:55 +00:00
Philippe Mathieu-Daudé 6617562659 hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
Patch created mechanically by rerunning:

  $  spatch --sp-file scripts/coccinelle/round.cocci \
            --macro-file scripts/cocci-macro-file.h \
            --dir . --in-place

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20180705155811.20366-7-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-26 17:17:32 +02:00
Philippe Mathieu-Daudé e800894a1c hw/pci-host/bonito: Use DeviceState::realize rather than SysBusDevice::init
Move from the legacy SysBusDevice::init method to using DeviceState::realize.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20181002212522.23303-7-f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24 06:44:59 -03:00
Peng Hao a8de011500 target-i386: add q35 0xcf8 port as coalesced_pio
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Message-Id: <1539795177-21038-6-git-send-email-peng.hao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19 13:44:11 +02:00
Peng Hao 37abf8d234 target-i386: add i440fx 0xcf8 port as coalesced_pio
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Message-Id: <1539795177-21038-5-git-send-email-peng.hao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19 13:44:11 +02:00
Peter Maydell 506e4a00de ppc patch queue 2018-09-25
Here are the accumulated ppc target patches for the last several
 weeks. Highlights are:
    * A number of 40p / PReP cleanups
    * Preliminary irq rework on the pseries machine towards the new
      XIVE interrupt controller
 
 There are a few patches which make small changes to generic device and
 arm code as prerequisites to the 40p interrupt routing cleanup.  They
 have acks from the relevant maintainers.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAlup3PYACgkQbDjKyiDZ
 s5IcYQ//fp79LhIXUKfJuGasVg1K8X795s3nD8vZ76z7FV2kNyHvOCcTsLn0Ccrp
 WJLdXdZ0ErY87vJPfHckii9pXOX8J38nV5EFCElSLslx6gCndQZdQX2WY3luwIzq
 afiKMERwTkCcqFXXPgweijhhuAU+roay8xdO/ZBO52ogzGaZalTFjG4l9a0DZMSm
 ZceDrLrKw6GOaxntLptcn2+Ncuwpm0WSpLyL+bGNAzSAbqdn1dhHQ9UBrcSMteWj
 df8J7CX63CFL2MwbQE3RyXeKaomdHabG+QgEVMlS4dpXVUx++ciMtrwZTX1mMDlI
 DA9+5u6TcRMz34hN8lWk2O05scOVp8965BcfdeRBYAOTDS4ztiZJ9spKkIV0lHfe
 rkgo7F1OsqoQhs9QrLYp0zZYn1OIhHWrbhk/DQptCJMRHk8mct4v2FcyGecU0e1Z
 7SlJErxHXmar83PCCJXhtYHthDxN+dTHUW0bbrF4IjysfK+poX5hvvFEjyHGPIJL
 duytwgEnnrBOFM7f7mdfH1LKeKzm1ji8nu7g2IsPAXC0xuFaq+d0fZWUWjymSPku
 k5k5UUPs8KLtP9XY2qhO0vxBWl5d+CTam19FWVqHjRAp5WqjmoLxWnkofupcT0Yv
 LcoHH2Ad9K8e0F4nA4UCYdJwfGH3qO+eBzmBR4+HZOuT1gVvRuw=
 =A62f
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180925' into staging

ppc patch queue 2018-09-25

Here are the accumulated ppc target patches for the last several
weeks. Highlights are:
   * A number of 40p / PReP cleanups
   * Preliminary irq rework on the pseries machine towards the new
     XIVE interrupt controller

There are a few patches which make small changes to generic device and
arm code as prerequisites to the 40p interrupt routing cleanup.  They
have acks from the relevant maintainers.

# gpg: Signature made Tue 25 Sep 2018 08:00:06 BST
# gpg:                using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.1-20180925:
  40p: add fixed IRQ routing for LSI SCSI device
  lsi53c895a: add optional external IRQ via qdev
  scsi: remove unused lsi53c895a_create() and lsi53c810_create() functions
  scsi: move lsi53c8xx_create() callers to lsi53c8xx_handle_legacy_cmdline()
  scsi: add lsi53c8xx_handle_legacy_cmdline() function
  sm501: Adjust endianness of pixel value in rectangle fill
  spapr_pci: add an extra 'nr_msis' argument to spapr_populate_pci_dt
  spapr: increase the size of the IRQ number space
  spapr: introduce a spapr_irq class 'nr_msis' attribute
  40p: use OR gate to wire up raven PCI interrupts
  raven: some minor IRQ-related tidy-ups
  hw/ppc: on 40p machine, change default firmware to OpenBIOS
  target/ppc/cpu-models: Re-group the 970 CPUs together again
  Record history of ppcemb target in common.json

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25 13:30:45 +01:00
Peter Maydell 5b9000b52f qemu-sparc.for-upstream queue
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAlubbyweHG1hcmsuY2F2
 ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfF6UH/idwgdp5Y4mHxANe
 1KRVyrz3AHmTsQq+6w5uGZ27YRuqxKFlQTxsOsOSa9RTD97A6Z0QjmklaJU66Gra
 CjaxYRC/bvlYAEW6KUGAtRkMItOQPfOS5Vu1RsOjoAPF7IL+whGhBRDVIA01Of/l
 FbWTsQlQ6sUzvQS/N9+h6M6VzI7Cm2cVzoqMLZ7ibjiaF1SrGCYYcFC4JBe9ydMk
 6sJ1B6mLRN1/V7c7AMX7WY/1s8rIfdZaYrBwQ6pRJEnIlEd8CZoqnlpuY1uKXjv2
 Ef/jEe0kqkWcJe64uKQtHi7SUrTuMKOOAbbz8lsrvuA5FooTB+BblInYF5LpjwO5
 2bdCDD4=
 =Dxrd
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc.for-upstream-20180914' into staging

qemu-sparc.for-upstream queue

# gpg: Signature made Fri 14 Sep 2018 09:19:56 BST
# gpg:                using RSA key 5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc.for-upstream-20180914:
  sun4u: implement custom FWPathProvider
  sabre: generate correct fw path for sabre PCI host bridge

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25 09:27:10 +01:00
Mark Cave-Ayland f40b83a4e3 40p: use OR gate to wire up raven PCI interrupts
According to the PReP specification section 6.1.6 "System Interrupt
Assignments", all PCI interrupts are routed via IRQ 15.

Instead of mapping each PCI IRQ separately, we introduce an OR gate within the
raven PCI host bridge and then wire the single output of the OR gate to the
interrupt controller.

Note that whilst the (now deprecated) PReP machine still exists we still need
to preserve the old IRQ routing. This is done by adding a new "is-legacy-prep"
property to the raven PCI host bridge which is set to true for the PReP
machine.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Mark Cave-Ayland 55a2290254 raven: some minor IRQ-related tidy-ups
This really lays the groundwork for the upcoming patches: it renames the
irqs PREPPCIState struct member to pci_irqs (as soon there will be a
distinction) and then changes the raven IRQ opaque to use PREPPCIState
instead of just irqs array.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Mark Cave-Ayland 09af820e49 sabre: generate correct fw path for sabre PCI host bridge
Set the fw_name property to "pci" and also set an explicit OFW address
using the value of the special_base property.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-09-14 09:18:05 +01:00
Mark Cave-Ayland 03756c840e uninorth: add ofw-addr property to allow correct fw path generation
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-30 10:42:18 +10:00
Mark Cave-Ayland ac43eb2e13 grackle: set device fw_name and address for correct fw path generation
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-30 10:42:18 +10:00
Peter Maydell 421ab72567 hw/pci-host/bonito: Move away from old_mmio accessors
Move away from the old_mmio MemoryRegion accessors in the
bonito pci controller.

This device is used only in the MIPS "fulong2e" machine.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180802155147.1863-3-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-08-21 09:52:22 +02:00
Philippe Mathieu-Daudé ab3dd74924 hw/ppc: Use the IEC binary prefix definitions
It eases code review, unit is explicit.

Patch generated using:

  $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/

and modified manually.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20180625124238.25339-33-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02 15:41:16 +02:00
Philippe Mathieu-Daudé be01029e5d hw/mips: Use the IEC binary prefix definitions
It eases code review, unit is explicit.

Patch generated using:

  $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
  $ git grep -n '[<>][<>]= ?[1-5]0'

and modified manually.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20180625124238.25339-31-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02 15:41:16 +02:00
Peter Maydell 4f91740698 hw/pci-host/xilinx-pcie: don't make "io" region be RAM
Currently we use memory_region_init_rom_nomigrate() to create
the "io" memory region to pass to pci_register_root_bus().
This is a dummy region, because this PCI controller doesn't
support accesses to PCI IO space.

There is no reason for the dummy region to be a RAM region;
it is only used as a place where PCI BARs can be mapped,
and if you could get a PCI card to do a bus master access
to the IO space it should not get acts-like-RAM behaviour.
Use a simple container memory region instead. (We do have
one PCI card model which can do bus master accesses to IO
space -- the LSI53C895A SCSI adaptor.)

This avoids the oddity of having a memory region which is
RAM but where the RAM is not migrated.

Note that the size of the region we use here has no
effect on behaviour.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
2018-06-27 20:12:34 +02:00
Mark Cave-Ayland 45fefe7c4d uninorth: remove token register from uninorth device
>From observation of various OS sources it can be seen that the token register
introduced in 4e46dcdbd3 "PPC: Newworld: Add uninorth token register" is not
required, since the only register currently implemented is the uninorth hardware
version which is read-only.

Remove the token register implementation and instead return the uninorth
version corresponding to the hardware.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12 09:33:52 +10:00
Philippe Mathieu-Daudé ab728275e4 hw: Do not include "exec/address-spaces.h" if it is not necessary
Code change produced with:
    $ git grep '#include "exec/address-spaces.h"' hw include/hw | \
      cut -d: -f-1 | \
      xargs egrep -L "(get_system_|address_space_)" | \
      xargs sed -i.bak '/#include "exec\/address-spaces.h"/d'

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-12-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 14:15:10 +02:00
Zihan Yang dda53ee93a hw/pci-host/q35: Replace hardcoded value with macro
During smram region initialization some addresses are hardcoded,
replace them with macro to be more clear to readers.

Previous patch forgets about one value and exceeds the line
limit of 90 characters. The v2 breaks a few long lines

Signed-off-by: Zihan Yang <whois.zihan.yang@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23 03:14:40 +03:00
Mark Cave-Ayland 0662946aa6 uninorth: create new uninorth device
Commit 4e46dcdbd3 "PPC: Newworld: Add uninorth token register" added a TODO
which was to convert the uninorth registers hack to a proper device. Move
these registers to a new uninorth device, removing the old hacks from
mac_newworld.c.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-05-04 15:00:37 +10:00
Mark Cave-Ayland c90c393c2d uninorth: rename UNINState to UNINHostState
The existing UNINState actually represents the PCI/AGP host bridge stage so
rename it accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Mark Cave-Ayland e226efbb26 uninorth: move PCI IO (ISA) memory region into the uninorth device
Do this for both the uninorth main and uninorth u3 AGP buses, using the main
PCI bus for each machine (this ensures the IO addresses still match those
used by OpenBIOS).

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Mark Cave-Ayland e7755cc114 uninorth: use object link to pass OpenPIC object to uninorth
Now that the OpenPIC is wired up via the board, we can now remove our temporary
PIC qdev pointer property and replace it with an object link instead.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Mark Cave-Ayland 8ce3f743c7 uninorth: remove obsolete pci_pmac_u3_init() function
Instead wire up the PCI/AGP host bridges in mac_newworld.c. Now this is complete
it is possible to move the initialisation of the PCI hole alias into
pci_u3_agp_init().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Mark Cave-Ayland 7b19318bee uninorth: remove obsolete pci_pmac_init() function
Instead wire up the PCI/AGP host bridges in mac_newworld.c. Now this is complete
it is possible to move the initialisation of the PCI hole alias into
pci_unin_main_init().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Mark Cave-Ayland 1ff861d289 uninorth: enable internal PCI host bridge
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Mark Cave-Ayland c1d66d378c uninorth: fix PCI and AGP bus mixup
Somewhere in the history of time, the initialisation of the PCI buses for the
AGP and PCI host bridges got mixed up in that the PCI host bridge was
creating an instance of the AGP PCI bus, and the AGP PCI bus was missing.

Swap the PCI host bridge over to use the correct PCI bus (including setting
the kMacRISCPCIAddressSelect register used by MacOS X) and add the missing
reference to the AGP PCI bus.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Mark Cave-Ayland 32cde6154c uninorth: move PCI host bridge bus initialisation into device realize
Since the IO address space is fixed to use the standard system IO address
space then we can also use the opportunity to remove the address_space_io
parameter from pci_pmac_init() and pci_pmac_u3_init().

Note we also move the default mac99 PCI bus to the end of the initialisation
list so that it becomes the default destination for any devices specified
via -device without an explicit PCI bus provided.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00