There is no ISA bus part in the MMIO VGA device, so rename:
* hw/display/vga-isa-mm.c -> hw/display/vga-mmio.c
* CONFIG_VGA_ISA_MM -> CONFIG_VGA_MMIO
* ISAVGAMMState -> VGAMmioState
* isa_vga_mm_init() -> vga_mmio_init()
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Boston is built around a Xilinx FPGA, which includes a PCIe root port
and an UART. An Intel EG20T PCH connects the I/O peripherals, but only
the SATA bus is emulated.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paul Burton <pburton@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190311005618.19007-6-philmd@redhat.com>
The Inter-Thread Communication Unit (ITU, introduced in commit
34fa7e83e1) is part of the Coherent Processing System (CPS),
as describe in commit 408294352ad:
Make ITU available in the system if CPU supports multithreading
and is part of CPS.
Have CPS select ITU in Kconfig to avoid the following build failure:
/usr/bin/ld: libqemu-mips64el-softmmu.fa.p/hw_mips_cps.c.o: in function `mips_cps_realize':
hw/mips/cps.c:104: undefined reference to `mips_itu_get_tag_region'
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190311005618.19007-5-philmd@redhat.com>
Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the SysBus code.
Extract the SysBus specific code to a new unit: fdc-sysbus.c,
and add a new Kconfig symbol: "FDC_SYSBUS".
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-6-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add Loongson-3 based machine support, it use liointc as the interrupt
controler and use GPEX as the pci controller. Currently it can work with
both TCG and KVM.
As the machine model is not based on any exiting physical hardware, the
name of the machine is "loongson3-virt". It may be superseded in future
by a real machine model. If this happens, then a regular deprecation
procedure shall occur for "loongson3-virt" machine.
We now already have a full functional Linux kernel (based on Linux-5.4.x
LTS) here:
https://github.com/chenhuacai/linux
Of course the upstream kernel is also usable (the kvm host side and
guest side have both been upstream in Linux-5.9):
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
How to use QEMU/Loongson-3?
1, Download kernel source from the above URL;
2, Build a kernel with arch/mips/configs/loongson3_defconfig;
3, Boot a Loongson-3A4000 host with this kernel (for KVM mode);
4, Build QEMU-master with this patchset;
5, modprobe kvm (only necessary for KVM mode);
6, Use QEMU with TCG:
qemu-system-mips64el -M loongson3-virt,accel=tcg -cpu Loongson-3A1000 -kernel <path_to_kernel> -append ...
Use QEMU with KVM:
qemu-system-mips64el -M loongson3-virt,accel=kvm -cpu Loongson-3A4000 -kernel <path_to_kernel> -append ...
The "-cpu" parameter is optional here and QEMU will use the correct type for TCG/KVM automatically.
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201221110538.3186646-5-chenhuacai@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: Set TYPE_LOONGSON_MACHINE instance_size in TypeInfo,
select FW_CFG_MIPS in Kconfig]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Implement fw_cfg_arch_key_name(), which returns the name of a
mips-specific key.
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1600742967-12933-7-git-send-email-chenhc@lemote.com>
[PMD: Add FW_CFG_MIPS Kconfig selector]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We deprecated the support for the 'r4k' machine for the 5.0 release
(commit d32dc61421), which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note:
- this virtual machine has no specification
- the Linux kernel dropped support for it 10 years ago
Users are recommended to use the Malta board instead.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20201102201311.2220005-1-f4bug@amsat.org>
We always miswrote the Fuloong machine... Fix its name.
Add an machine alias to the previous name for backward
compatibility.
Suggested-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-id: <20200526104726.11273-11-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Ease the kconfig selection by introducing CONFIG_PCI_BONITO to select
the Bonito North Bridge.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: <20200510210128.18343-6-f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently, isa-superio.c is always compiled as soon as CONFIG_ISA_BUS
is enabled. But there are also machines that have an ISA BUS without
any of the superio chips attached to it, so we should not compile
isa-superio.c in case we only compile a QEMU for such a machine.
Thus add a proper CONFIG_ISA_SUPERIO switch so that this file only gets
compiled when we really, really need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This platform use standard PC devices connected to an ISA bus.
Networking is provided by a ne2000 chipset.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190701112612.14758-5-philmd@redhat.com>
The Jazz use the RC4030 Asic to provide an EISA bus and DMA/IRQ.
The framebuffer display is managed by a G364, the network card is
a Sonic DP83932. A QLogic ESP216 provides a SCSI bus.
None, for the both machine variants (PICA-61 and Magnum 4000),
the DP83932 chipset is soldered on the board, and is MMIO-mapped
(selected via Chip Select). Therefore we have to enforce the
'select' Kconfig rule (we can not use the 'imply' rule helpful
when devices are connected on a bus).
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190701112612.14758-4-philmd@redhat.com>
The MIPSsim machine only emulates an 8250 UART and a simple network
controller, connected via an ISA bus.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190701112612.14758-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-39-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Kconfig files were generated mostly with this script:
for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
shift
if test $# = 1; then
cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
bool
EOF
git add $(dirname $1)/Kconfig
else
echo $i $*
fi
done
sed -i '$d' hw/*/Kconfig
for i in hw/*; do
if test -d $i && ! test -f $i/Kconfig; then
touch $i/Kconfig
git add $i/Kconfig
fi
done
Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.
Kconfig.host and hw/Kconfig were created manually.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé
Philippe Mathieu-Daudé
Huacai Chen
Thomas Huth
Paolo Bonzini