The PHB4 reset handler was preparing ground for PHB5 to set
appropriately the device id. We don't need it for the PHB4 since the
device id is already set in the root port complex. PH5 will introduce
its own.
"device-id" property is now useless. It should be removed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211222063817.1541058-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The POWER8 processors with a NVLink logic unit have 4 PHB3 devices per
chip.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211222063817.1541058-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Disable check-python-tox
Fix emulation of hppa STBY insn
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmHTMwQdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9Rhgf/fFVZTVKscFhrnjzH
T7PjP3c6TeVpFU8uIb6h1NC0Ugyo4rBds2Gg/qIE+/X8jvDIHa6/aW1HKacWq6Uq
3Qea+FU56Oc8BpH1CQZEMR/U2ChDofvtcXf/PGHklnpgYCqZctkpNAFPdWlpT9Fx
jy2Y29rGijV1Q2GEXqD8H6Ij6SX+QZBO5DYaiqGsLSWMS8W2a58rfahBBgslvL82
UkpJ7TMzvERN8XPBlFOzvqzgSUX4CObAxn2/EiFT4rXukRbVuf5PbDtl2nNRtcS4
Rfu59GsrHz0tgl3JTRZ/5ab7Na/w8ewknCUPtNygf0k8kKZn8IhDDMhT0ekepoZ9
dsynQg==
=WrNf
-----END PGP SIGNATURE-----
Merge tag 'pull-misc-20220103' of https://gitlab.com/rth7680/qemu into staging
Fix some meson conversion breakage
Disable check-python-tox
Fix emulation of hppa STBY insn
# gpg: Signature made Mon 03 Jan 2022 09:31:48 AM PST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-misc-20220103' of https://gitlab.com/rth7680/qemu:
gitlab: Disable check-python-tox
target/hppa: Fix atomic_store_3 for STBY
tests/tcg: Unconditionally use 90 second timeout
tests/tcg: Use $cpu in configure.sh
meson: Unify mips and mips64 in host_arch
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Set this test to be manually run, until failures can be fixed.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Clarify qdev_connect_gpio_out() documentation
- Rework test-smp-parse tests following QOM style
- Introduce CPU cluster topology support (Yanan Wang)
- MAINTAINERS updates (Yanan Wang, Li Zhijian, myself)
-----BEGIN PGP SIGNATURE-----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=gP1z
-----END PGP SIGNATURE-----
Merge tag 'machine-core-20211231' of https://github.com/philmd/qemu into staging
Machine core patches
- Clarify qdev_connect_gpio_out() documentation
- Rework test-smp-parse tests following QOM style
- Introduce CPU cluster topology support (Yanan Wang)
- MAINTAINERS updates (Yanan Wang, Li Zhijian, myself)
# gpg: Signature made Fri 31 Dec 2021 04:45:35 AM PST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'machine-core-20211231' of https://github.com/philmd/qemu:
MAINTAINERS: email address change
MAINTAINERS: Change philmd's email address
MAINTAINERS: Self-recommended as reviewer of "Machine core"
tests/unit/test-smp-parse: Keep default MIN/MAX CPUs in machine_base_class_init
tests/unit/test-smp-parse: No need to explicitly zero MachineClass members
tests/unit/test-smp-parse: Add testcases for CPU clusters
hw/core/machine: Introduce CPU cluster topology support
qemu-options: Improve readability of SMP related Docs
hw/core: Rename smp_parse() -> machine_parse_smp_config()
tests/unit/test-smp-parse: Constify some pointer/struct
tests/unit/test-smp-parse: Simplify pointer to compound literal use
tests/unit/test-smp-parse: Add 'smp-generic-valid' machine type
tests/unit/test-smp-parse: Add 'smp-generic-invalid' machine type
tests/unit/test-smp-parse: Add 'smp-with-dies' machine type
tests/unit/test-smp-parse: Split the 'generic' test in valid / invalid
tests/unit/test-smp-parse: Pass machine type as argument to tests
hw/qdev: Rename qdev_connect_gpio_out*() 'input_pin' parameter
hw/qdev: Correct qdev_connect_gpio_out_named() documentation
hw/qdev: Correct qdev_init_gpio_out_named() documentation
hw/qdev: Cosmetic around documentation
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fujitsu's mail service has migrated to O365 months ago, the
lizhijian@cn.fujitsu.com address will stop working on 2022-06-01,
change it to my new email address lizhijian@fujitsu.com.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20211231050901.360-1-lizhijian@cn.fujitsu.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The philmd@redhat.com email address will stop working on
2022-01-01, change it to my personal email address.
Update .mailmap in case anyone wants to send me an email
because of some past commit I authored.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211231000759.707519-1-philmd@redhat.com>
I've built interests in the generic machine subsystem and
have also been working on projects related to this part,
self-recommand myself as a reviewer so that I can help to
review some patches familiar to me, and have a chance to
learn more continuously.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-8-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Most machine types in test-smp-parse will be OK to have the default
MIN/MAX CPUs except "smp-generic-invalid", let's keep the default
values in machine_base_class_init which will be inherited. And if
we hope a different value for a specific machine, modify it in its
own initialization function.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-7-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The default value of the MachineClass members is 0, which
means we don't have to explicitly zero them. Also the value
of "mc->smp_props.prefer_sockets" will be taken care of by
smp_parse_test(), we don't necessarily need the statement
in machine_base_class_init() either.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-6-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add testcases for parsing of the four-level CPU topology hierarchy,
ie sockets/clusters/cores/threads, which will be supported on ARM
virt machines.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-5-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The new Cluster-Aware Scheduling support has landed in Linux 5.16,
which has been proved to benefit the scheduling performance (e.g.
load balance and wake_affine strategy) on both x86_64 and AArch64.
So now in Linux 5.16 we have four-level arch-neutral CPU topology
definition like below and a new scheduler level for clusters.
struct cpu_topology {
int thread_id;
int core_id;
int cluster_id;
int package_id;
int llc_id;
cpumask_t thread_sibling;
cpumask_t core_sibling;
cpumask_t cluster_sibling;
cpumask_t llc_sibling;
}
A cluster generally means a group of CPU cores which share L2 cache
or other mid-level resources, and it is the shared resources that
is used to improve scheduler's behavior. From the point of view of
the size range, it's between CPU die and CPU core. For example, on
some ARM64 Kunpeng servers, we have 6 clusters in each NUMA node,
and 4 CPU cores in each cluster. The 4 CPU cores share a separate
L2 cache and a L3 cache tag, which brings cache affinity advantage.
In virtualization, on the Hosts which have pClusters (physical
clusters), if we can design a vCPU topology with cluster level for
guest kernel and have a dedicated vCPU pinning. A Cluster-Aware
Guest kernel can also make use of the cache affinity of CPU clusters
to gain similar scheduling performance.
This patch adds infrastructure for CPU cluster level topology
configuration and parsing, so that the user can specify cluster
parameter if their machines support it.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211228092221.21068-3-wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Added '(since 7.0)' to @clusters in qapi/machine.json]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We have a description in qemu-options.hx for each CPU topology
parameter to explain what it exactly means, and also an extra
declaration for the target-specific one, e.g. "for PC only"
when describing "dies", and "for PC, it's on one die" when
describing "cores".
Now we are going to introduce one more non-generic parameter
"clusters", it will make the Doc less readable and if we still
continue to use the legacy way to describe it.
So let's at first make two tweaks of the Docs to improve the
readability and also scalability:
1) In the -help text: Delete the extra specific declaration and
describe each topology parameter level by level. Then add a
note to declare that different machines may support different
subsets and the actual meaning of the supported parameters
will vary accordingly.
2) In the rST text: List all the sub-hierarchies currently
supported in QEMU, and correspondingly give an example of
-smp configuration for each of them.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-2-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
All methods related to MachineState are prefixed with "machine_".
smp_parse() does not need to be an exception. Rename it and
const'ify the SMPConfiguration argument, since it doesn't need
to be modified.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-9-philmd@redhat.com>
Declare structures const when we don't need to modify
them at runtime.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-8-philmd@redhat.com>
We can simply use a local variable (and pass its pointer) instead
of a pointer to a compound literal.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-7-philmd@redhat.com>
Keep the common TYPE_MACHINE class initialization in
machine_base_class_init(), make it abstract, and move
the non-common code to a new class: "smp-generic-valid".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211216132015.815493-6-philmd@redhat.com>
Avoid modifying the MachineClass internals by adding the
'smp-generic-invalid' machine, which inherits from TYPE_MACHINE.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211216132015.815493-5-philmd@redhat.com>
Avoid modifying the MachineClass internals by adding the
'smp-with-dies' machine, which inherits from TYPE_MACHINE.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-4-philmd@redhat.com>
Split the 'generic' test in two tests: 'valid' and 'invalid'.
This will allow us to remove the hack which modifies the
MachineClass internal state.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-3-philmd@redhat.com>
Use g_test_add_data_func() instead of g_test_add_func() so we can
pass the machine type to the tests (we will soon have different
machine types).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-2-philmd@redhat.com>
@pin is an input where we connect a device output.
Rename it @input_pin to simplify the documentation.
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211218130437.1516929-5-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
qdev_connect_gpio_out_named() is described as qdev_connect_gpio_out(),
and referring to itself in an endless loop, which is confusing. Fix.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211218130437.1516929-4-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
qdev_init_gpio_out_named() is described as qdev_init_gpio_out(),
and referring to itself in an endless loop, which is confusing. Fix.
Reported-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211218130437.1516929-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add empty lines to have a clearer distinction between different
functions declarations.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211218130437.1516929-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The parallel version of STBY did not take host endianness into
account, and also computed the incorrect address for STBY_E.
Bswap twice to handle the merge and store. Compute mask inside
the function rather than as a parameter. Force align the address,
rather than subtracting one.
Generalize the function to system mode by using probe_access().
Cc: qemu-stable@nongnu.org
Tested-by: Helge Deller <deller@gmx.de>
Reported-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cross-i386-tci test has timeouts because we're no longer
applying the timeout that we desired. Hack around it.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes: 23a77b2d18 ("build-system: clean up TCG/TCI configury")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use $cpu instead of $ARCH, which has been removed from
the top-level configure.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes: 823eb01345 ("configure, meson: move ARCH to meson.build")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes the build on a mips64 host. Prior to the break, we identified
the arch via the __mips__ define; afterward we use meson's
host_machine.cpu_family(). Restore the previous combination.
Fixes: 823eb01345 ("configure, meson: move ARCH to meson.build")
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Have various functions from the Memory API:
- take a MemTxAttrs argument,
- propagate a MemTxResult.
-----BEGIN PGP SIGNATURE-----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=hzVT
-----END PGP SIGNATURE-----
Merge tag 'memory-api-20211231' of https://github.com/philmd/qemu into staging
Memory API patches
Have various functions from the Memory API:
- take a MemTxAttrs argument,
- propagate a MemTxResult.
# gpg: Signature made Thu 30 Dec 2021 04:52:20 PM PST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'memory-api-20211231' of https://github.com/philmd/qemu: (22 commits)
pci: Let ld*_pci_dma() propagate MemTxResult
pci: Let st*_pci_dma() propagate MemTxResult
pci: Let ld*_pci_dma() take MemTxAttrs argument
pci: Let st*_pci_dma() take MemTxAttrs argument
dma: Let ld*_dma() propagate MemTxResult
dma: Let st*_dma() propagate MemTxResult
dma: Let ld*_dma() take MemTxAttrs argument
dma: Let st*_dma() take MemTxAttrs argument
dma: Let dma_buf_rw() propagate MemTxResult
dma: Let dma_buf_read() take MemTxAttrs argument
dma: Let dma_buf_write() take MemTxAttrs argument
dma: Let dma_buf_rw() take MemTxAttrs argument
pci: Let pci_dma_rw() take MemTxAttrs argument
dma: Have dma_buf_read() / dma_buf_write() take a void pointer
dma: Have dma_buf_rw() take a void pointer
dma: Let dma_memory_map() take MemTxAttrs argument
dma: Let dma_memory_read/write() take MemTxAttrs argument
dma: Let dma_memory_rw() take MemTxAttrs argument
dma: Let dma_memory_rw_relaxed() take MemTxAttrs argument
dma: Let dma_memory_set() take MemTxAttrs argument
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ld*_dma() returns a MemTxResult type. Do not discard
it, return it to the caller.
Update the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-24-philmd@redhat.com>
st*_dma() returns a MemTxResult type. Do not discard
it, return it to the caller.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-23-philmd@redhat.com>
Let devices specify transaction attributes when calling ld*_pci_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-22-philmd@redhat.com>
Let devices specify transaction attributes when calling st*_pci_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-21-philmd@redhat.com>
dma_memory_read() returns a MemTxResult type. Do not discard
it, return it to the caller.
Update the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-19-philmd@redhat.com>
dma_memory_write() returns a MemTxResult type. Do not discard
it, return it to the caller.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-18-philmd@redhat.com>
Let devices specify transaction attributes when calling ld*_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-17-philmd@redhat.com>
Let devices specify transaction attributes when calling st*_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-16-philmd@redhat.com>
dma_memory_rw() returns a MemTxResult type. Do not discard
it, return it to the caller.
Since dma_buf_rw() was previously returning the QEMUSGList
size not consumed, add an extra argument where this size
can be stored.
Update the 2 callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-14-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_buf_read().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-13-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_buf_write().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-12-philmd@redhat.com>
Let devices specify transaction attributes when calling dma_buf_rw().
Keep the default MEMTXATTRS_UNSPECIFIED in the 2 callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-11-philmd@redhat.com>
Let devices specify transaction attributes when calling pci_dma_rw().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-10-philmd@redhat.com>
DMA operations are run on any kind of buffer, not arrays of
uint8_t. Convert dma_buf_read/dma_buf_write functions to take
a void pointer argument and save us pointless casts to uint8_t *.
Remove this pointless casts in the megasas device model.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-9-philmd@redhat.com>
DMA operations are run on any kind of buffer, not arrays of
uint8_t. Convert dma_buf_rw() to take a void pointer argument
to save us pointless casts to uint8_t *.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-8-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_map().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
- dma_memory_map(E1, E2, E3, E4)
+ dma_memory_map(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-7-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_rw().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-5-philmd@redhat.com>
We will add the MemTxAttrs argument to dma_memory_rw() in
the next commit. Since dma_memory_rw_relaxed() is only used
by dma_memory_rw(), modify it first in a separate commit to
keep the next commit easier to review.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-4-philmd@redhat.com>
