After issuing a command, flush the pipe. This does not change anything
in Python 2, but it makes a difference in Python 3.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-3-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When closing a connection, make the nbd-fault-injector flush the socket.
Without this, the output is a bit unreliable with Python 3.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181022135307.14398-2-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
-----BEGIN PGP SIGNATURE-----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=sHPv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test that we can resume source vm after [failed] migration, and bitmaps
are ok.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Before previous patch, iotest 169 was actually broken for the case
test_persistent__not_migbitmap__offline_shared, while formally
passing.
After migration log of vm_b had message:
qemu-system-x86_64: Could not reopen qcow2 layer: Bitmap already
exists: bitmap0
which means that invalidation failed and bs->drv = NULL.
It was because we've loaded bitmap twice: on open and on invalidation.
Add code to 169, to catch such fails.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Fix also a grammar issue.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20180713054755.23323-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit 990dc39c made all tests executable at the time, but 218 came in
later, and missing those permissions.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181004161852.11673-4-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit cce293a294 moved some functions from common.config to
common.rc, but the error messages still reference the old file
location.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181004161852.11673-5-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
bdrv_img_create() takes an Error ** argument and uses it in the
conventional way, except for one place: when qemu_opts_do_parse()
fails, it first reports its error to stderr or the HMP monitor with
error_report_err(), then error_setg()'s a generic error.
When the caller reports that second error similarly, this produces two
consecutive error messages on stderr or the HMP monitor.
When the caller does something else with it, such as send it via QMP,
the first error still goes to stderr or the HMP monitor. Fortunately,
no such caller exists.
Simply use the first error as is. Update expected output of
qemu-iotest 049 accordingly.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-37-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Currently, the default values for werror and rerror have to be set
explicitly with blk_set_on_error() by the callers of blk_new(). The only
caller actually doing this is blockdev_init(), which is called for
BlockBackends created using -drive.
In particular, anonymous BlockBackends created with
-device ...,drive=<node-name> didn't get the correct default set and
instead defaulted to the integer value 0 (= BLOCKDEV_ON_ERROR_REPORT).
This is the intended default for rerror anyway, but the default for
werror should be BLOCKDEV_ON_ERROR_ENOSPC.
Set the defaults in blk_new() instead so that they apply no matter what
way the BlockBackend was created.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Sufficient L2 cache can noticeably improve the performance when using
large images with frequent I/O.
Previously, unless 'cache-size' was specified and was large enough, the
L2 cache was set to a certain size without taking the virtual image size
into account.
Now, the L2 cache assignment is aware of the virtual size of the image,
and will cover the entire image, unless the cache size needed for that is
larger than a certain maximum. This maximum is set to 1 MB by default
(enough to cover an 8 GB image with the default cluster size) but can
be increased or decreased using the 'l2-cache-size' option. This option
was previously documented as the *maximum* L2 cache size, and this patch
makes it behave as such, instead of as a constant size. Also, the
existing option 'cache-size' can limit the sum of both L2 and refcount
caches, as previously.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image locking errors happening at device initialization time doesn't say
which file cannot be locked, for instance,
-device scsi-disk,drive=drive-1: Failed to get shared "write" lock
Is another process using the image?
could refer to either the overlay image or its backing image.
Hoist the error_append_hint to the caller of raw_check_lock_bytes where
file name is known, and include it in the error hint.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We just fixed a bug that was causing a use-after-free when QEMU was
unable to create a temporary snapshot. This is a test case for this
scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds some tests for block-commit with the new options top-node and
base-node (taking node names) instead of top and base (taking file
names).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a small test that will check for the ability to parse
both legacy and modern options for rbd.
The way the test is set up is for failure to occur, but without
having to wait to timeout on a non-existent rbd server. The error
messages in the success path show that the arguments were parsed.
The failure behavior prior to the patch series that has this test, is
qemu-img complaining about mandatory options (e.g. 'pool') not being
provided.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: f830580e339b974a83ed4870d11adcdc17f49a47.1536704901.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
blockdev-mirror with the same node for source and target segfaults
today: A node is in its own backing chain, so mirror_start_job() decides
that this is an active commit. When adding the intermediate nodes with
block_job_add_bdrv(), it starts the iteration through the subchain with
the backing file of source, though, so it never reaches target and
instead runs into NULL at the base.
While we could fix that by starting with source itself, there is no
point in allowing mirroring a node into itself and I wouldn't be
surprised if this caused more problems later.
So just check for this scenario and error out.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The previous patch fixes a problem in which draining a block device
with more than one throttled request can make it wait first for the
completion of requests in other members of the same group.
This patch updates test_remove_group_member() in iotest 093 to
reproduce that scenario. This updated test would hang QEMU without the
fix from the previous patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A throttle group can have several members, and each one of them can
have several pending requests in the queue.
The requests are processed in a round-robin fashion, so the algorithm
decides the drive that is going to run the next request and sets a
timer in it. Once the timer fires and the throttled request is run
then the next drive from the group is selected and a new timer is set.
If the user tried to remove a drive from a group and that drive had a
timer set then the code was not taking care of setting up a new timer
in one of the remaining members of the group, freezing their I/O.
This problem was fixed in 6fccbb475b,
and this patch adds a new test case that reproduces this exact
scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make sure that query-blockstats returns information for every
BlockBackend that is named or attached to a device model (or both).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On my system (Fedora 28), this script reports a 'failed to get
"consistent read" lock' error. Following docs/devel/testing.rst, it's
better to add locking=off here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
223 tests persistent dirty bitmaps which are not supported in
compat=0.10, so that option is unsupported for this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test directory should be filtered before the image format, otherwise
the test will fail if the image format is part of the test directory,
like so:
[...]
-can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+can't open: Could not open '/tmp/test-IMGFMT/t.IMGFMT': Is a directory
[...]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test doesn't actually care about the format anyway, it just
supports "all formats" as a convenience. LUKS however does not use a
simple image filename which confuses this iotest.
We can simply skip the test for formats that use IMGOPTSSYNTAX for
their filenames without missing much coverage.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test case uses block devices with driver=file, which causes the test
to fail after commit 230ff73904 added a deprecation warning for this.
Fix the test case to use driver=host_device and update the reference
output accordingly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We currently don't enforce that the sparse segments we detect during convert are
aligned. This leads to unnecessary and costly read-modify-write cycles either
internally in Qemu or in the background on the storage device as nearly all
modern filesystems or hardware have a 4k alignment internally.
This patch modifies is_allocated_sectors so that its *pnum result will always
end at an alignment boundary. This way all requests will end at an alignment
boundary. The start of all requests will also be aligned as long as the results
of get_block_status do not lead to an unaligned offset.
The number of RMW cycles when converting an example image [1] to a raw device that
has 4k sector size is about 4600 4k read requests to perform a total of about 15000
write requests. With this path the additional 4600 read requests are eliminated while
the number of total write requests stays constant.
[1] https://cloud-images.ubuntu.com/releases/16.04/release/ubuntu-16.04-server-cloudimg-amd64-disk1.vmdk
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test that we're rejecting what we ought to for file,
host_driver and host_cdrom drivers. Test that we're
seeing the deprecated message for block and chardevs
on the file driver.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
197 is one example where _make_test_img is used twice without stopping
the NBD server in between. An error will occur like this:
@@ -26,9 +26,13 @@
=== Partial final cluster ===
+qemu-img: TEST_DIR/t.IMGFMT: Failed to get "resize" lock
+Is another process using the image?
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1024
+Failed to find an available port: Address already in use
read 1024/1024 bytes at offset 0
Patch _make_test_img to stop the old qemu-nbd before starting a new one,
which fixes this problem, and similarly 215.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This step was left behind my mistake. As suggested by the echoed text,
the intention was to test two devices with the same image, with
different options. The behavior should be the same as two QEMU
processes. Complete it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Luks needs special parameters to operate the image. Since this test is
focusing on image fleecing, skip skip that format.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the virtual disk size isn't aligned to full clusters,
bdrv_co_do_copy_on_readv() may get pnum == 0 before having the full
cluster completed, which will let it run into an assertion failure:
qemu-io: block/io.c:1203: bdrv_co_do_copy_on_readv: Assertion `skip_bytes < pnum' failed.
Check for EOF, assert that we read at least as much as the read request
originally wanted to have (which is true at EOF because otherwise
bdrv_check_byte_request() would already have returned an error) and
return success early even though we couldn't copy the full cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test verifies that VMDK backing file reads fail when the
backing file has a non-matching CID. This includes non-VMDK backing
files.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180702210721.4847-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the user passes a too long node name string, we silently truncate it
to fit into BlockDriverState.node_name, i.e. to 31 characters. Apart
from surprising the user when the node has a different name than
requested, this also bypasses the check for duplicate names, so that the
same name can be assigned to multiple nodes.
Fix this by just making too long node names an error.
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Although this test is NOT a full test of image fleecing (as it
intentionally uses just a single block device directly exported
over NBD, rather than trying to set up a blockdev-backup job with
multiple BDS involved), it DOES prove that qemu as a server is
able to properly expose a dirty bitmap over NBD.
When coupled with image fleecing, it is then possible for a
third-party client to do an incremental backup by using
qemu-img map with the x-dirty-bitmap option to learn which parts
of the file are dirty (perhaps confusingly, they are the portions
mapped as "data":false - which is part of the reason this is
still in the x- experimental namespace), along with another
normal client (perhaps 'qemu-nbd -c' to expose the server over
/dev/nbd0 and then just use normal I/O on that block device) to
read the dirty sections.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180702191458.28741-3-eblake@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20180702194630.9360-3-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In my Out-Of-Band test, "check -qcow2 060" fail with this:
--- /home/peterx/git/qemu/tests/qemu-iotests/060.out
+++ /home/peterx/git/qemu/bin/tests/qemu-iotests/060.out.bad
@@ -427,8 +427,8 @@
QMP_VERSION
{"return": {}}
qcow2: Image is corrupt: L2 table offset 0x2a2a2a00 unaligned (L1
index: 0); further non-fatal corruption events will be suppressed
-{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_IMAGE_CORRUPTED", "data": {"device": "", "msg": "L2 table offset 0x2a2a2a0
0 unaligned (L1 index: 0)", "node-name": "drive", "fatal": false}}
read failed: Input/output error
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_IMAGE_CORRUPTED", "data": {"device": "", "msg": "L2 table offset 0x2a2a2a0
0 unaligned (L1 index: 0)", "node-name": "drive", "fatal": false}}
{"return": ""}
{"return": {}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP},
"event": "SHUTDOWN", "data": {"guest": false}}
The order of the event and the in/out error line is swapped. I didn't
dig up the reason, but AFAIU what we want to verify is the event rather
than stderr. Let's drop the stderr line directly for this test.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180620073223.31964-5-peterx@redhat.com>
[Commit message touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Not updating src_offset will result in wrong data being written to dst
image.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test for a temporary write failure, which simulates the
situation after werror=stop/enospc has stopped the VM. We shouldn't
leave leaked clusters behind in such cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Commit abf754fe40 updated 026.out, but forgot to also update
026.out.nocache.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Although qemu-img creates aligned files (by rounding up), it
must also gracefully handle files that are not sector-aligned.
Test that the bug fixed in the previous patch does not recur.
It's a bit annoying that we can see the (implicit) hole past
the end of the file on to the next sector boundary, so if we
ever reach the point where we report a byte-accurate size rather
than our current behavior of always rounding up, this test will
probably need a slight modification.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It has been marked as deprecated since QEMU v2.0 already, so it
is time now to finally remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1528288551-31641-1-git-send-email-thuth@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
219 has two issues that may lead to sporadic failure, both of which are
the result of issuing query-jobs too early after a job has been
modified. This can then lead to different results based on whether the
modification has taken effect already or not.
First, query-jobs is issued right after the job has been created.
Besides its current progress possibly being in any random state (which
has already been taken care of), its total progress too is basically
arbitrary, because the job may not yet have been able to determine it.
This patch addresses this by just filtering the total progress, like
what has been done for the current progress already. However, for more
clarity, the filtering is changed to replace the values by a string
'FILTERED' instead of deleting them.
Secondly, query-jobs is issued right after a job has been resumed. The
job may or may not yet have had the time to actually perform any I/O,
and thus its current progress may or may not have advanced. To make
sure it has indeed advanced (which is what the reference output already
assumes), keep querying it until it has.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606190628.8170-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's possible, that job was finished during waiting. In this case we
will see error message "Timeout waiting for job to pause" which is not
very informative. So, let's check during waiting iteration that the job
exists.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180601115923.17159-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds a test case to 122 for what happens when you convert to a
target with a backing file that is shorter than the target, and the
image format does not support efficient zero writes (as is the case with
qcow2 v2).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180501165750.19242-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509182002.8044-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
As a showcase of how you can use qemu-io's exit code to determine
success or failure (same for qemu-img), this test is changed to use
qemu_io_silent() instead of qemu_io(), and to assert the exit code
instead of logging the filtered result.
One real advantage of this is that in case of an error, you get a
backtrace that helps you locate the issue in the test file quickly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509194302.21585-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
With qemu-io now returning a useful exit code, some tests may find it
sufficient to just query that instead of logging (and filtering) the
whole output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509194302.21585-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds a test for an I/O error during snapshot deletion, and maybe
more importantly, for how to repair the resulting image. If the
snapshot has been deleted before the error occurs, the only negative
result will be leaked clusters -- and those should be repairable with
qemu-img check -r leaks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509200059.31125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test case has been broken since 398e6ad014 (roughly half a
year). qemu-img amend requires its output image to be R/W, so it opens
it as such; the node is then turned into an read-only node automatically
which is now accompanied by a warning, however. This warning has not
been part of the reference output.
For one thing, this warning shows that we cannot keep the test case as
it is. We would need a format that has no create_opts but that does
have write support -- we do not have such a format, though.
Another thing is that qemu now actually checks whether an image format
supports amendment instead of whether it has create_opts (since the
former always implies the latter). So we can now use any format that
does not support amendment (even if it supports creation) and thus test
the same code path.
The reason nobody has noticed the breakage until now of course is the
fact that nobody runs the iotests for nbd+bochs. There actually was
never any reason to set the protocol to "nbd" but because that was
technically correct; functionally it made no difference. So that is the
first thing we are going to change: Make the protocol "file" instead so
that people might actually notice breakage here.
Secondly, now that bochs no longer works for the amend test case, we
have to change the format there anyway. Set let us just bend the truth
a bit, declare this test a raw test. In fact, that does not even
concern the bochs test cases, other than the output now reading 'bochs'
instead of 'IMGFMT'.
So with this test now being a raw test, we can rework the amend test
case to use raw instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180509210023.20283-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds test cases to 082 for qemu-img create/convert/amend "-o help"
on formats that do not support creation or amendment, respectively.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The more generic print_block_option_help() function is not really
suitable for qemu-img amend, for a couple of reasons:
(1) We do not need to append the protocol-level options, as amendment
happens only on one node and does not descend downwards to its
children.
(2) print_block_option_help() says those options are "supported". For
option amendment, we do not really know that. So this new function
explicitly says that those options are the creation options, and not
all of them may be supported.
(3) If the driver does not support option amendment, we should not print
anything (except for an error message that amendment is not
supported).
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Looking at the qcow2 code that is riddled with error_report() calls,
this is really how it should have been from the start.
Along the way, turn the target_version/current_version comparisons at
the beginning of qcow2_downgrade() into assertions (the caller has to
make sure these conditions are met), and rephrase the error message on
using compat=1.1 to get refcount widths other than 16 bits.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509210023.20283-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds a test case to 153 which tries to overwrite an image
(using qemu-img create) while it is in use. Without the original user
explicitly sharing the necessary permissions (writing and truncation),
this should not be allowed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180509215336.31304-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit d759c951f3 ("replay: push
replay_mutex_lock up the call tree") removed the !timeout lock
optimization in the main loop.
The idea of the optimization was to avoid ping-pongs between threads by
keeping the Big QEMU Lock held across non-blocking (!timeout) main loop
iterations.
A warning is printed when the main loop spins without releasing BQL for
long periods of time. These warnings were supposed to aid debugging but
in practice they just alarm users. They are considered noise because
the cause of spinning is not shown and is hard to find.
Now that the lock optimization has been removed, there is no danger of
hogging the BQL. Drop the spin counter and the infamous warning.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
We're ready to declare the blockdev-create job stable. This renames the
corresponding QMP command from x-blockdev-create to blockdev-create.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This rewrites the test case 213 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.
All of the test cases stay the same as before, but in order to be able
to implement proper job handling, the test case is rewritten in Python.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This rewrites the test case 212 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.
All of the test cases stay the same as before, but in order to be able
to implement proper job handling, the test case is rewritten in Python.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This rewrites the test case 211 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.
All of the test cases stay the same as before, but in order to be able
to implement proper job handling, the test case is rewritten in Python.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This rewrites the test case 210 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.
All of the test cases stay the same as before, but in order to be able
to implement proper job handling, the test case is rewritten in Python.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This rewrites the test case 207 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.
Most of the test cases stay the same as before (the exception being some
improved 'size' options that allow distinguishing which command created
the image), but in order to be able to implement proper job handling,
the test case is rewritten in Python.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This rewrites the test case 206 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.
All of the test cases stay the same as before, but in order to be able
to implement proper job handling, the test case is rewritten in Python.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds two helper functions that are useful for test cases that make
use of a non-file protocol (specifically ssh).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Add an iotests.py function that runs a job and only returns when it is
destroyed. An error is logged when the job failed and job-finalize and
job-dismiss commands are issued if necessary.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This adds a filter function to postprocess 'qemu-img info' input
(similar to what _img_info does), and an img_info_log() function that
calls 'qemu-img info' and logs the filtered output.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This adds a helper function that logs both the QMP request and the
received response before returning it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds a helper function that returns a list of QMP events that are
already filtered through filter_qmp_event().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This changes the x-blockdev-create QMP command so that it doesn't block
the monitor and the main loop any more, but starts a background job that
performs the image creation.
The basic job as implemented here is all that is necessary to make image
creation asynchronous and to provide a QMP interface that can be marked
stable, but it still lacks a few features that jobs usually provide: The
job will ignore pause commands and it doesn't publish more than very
basic progress yet (total-progress is 1 and current-progress advances
from 0 to 1 when the driver callbacks returns). These features can be
added later without breaking compatibility.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
qmp_to_opts() used to be a method of QMPTestCase, but recently we
started to add more Python test cases that don't make use of
QMPTestCase. In order to make the method usable there, move it to VM.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds a QMP event that is emitted whenever a job transitions from
one status to another.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
185 and 191 define a MIG_SOCKET even though they don't do anything with
migration. Remove the useless variable.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
grep for "migrate" turns up a few test cases which use migration, but
haven't been in the "migration" group so far. Add them to the group.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
The reference output file only works for file. 'qemu-img convert -p'
makes a lot more progress updates for NFS than for file, so disable the
test for NFS.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
NFS paths were only partially filtered in _filter_img_create, _img_info
and _filter_img_info, resulting in "nfs://127.0.0.1TEST_DIR/t.IMGFMT".
This adds another replacement to the sed calls that matches the test
directory not as a host path, but as an NFS URL (the prefix as used for
$TEST_IMG).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Test cases were trying to use nfs:// URLs as local filenames, which made
every test fail for NFS. With TEST_IMG and TEST_IMG_FILE set like for
the other protocols, NFS tests can pass again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Currently the timer is cancelled and the block job is entered by
block_job_resume(). This behavior causes drain to run extra blockjob
iterations when the job was sleeping due to the ratelimit.
This patch leaves the job asleep when block_job_resume() is called.
Jobs can still be forcibly woken up using block_job_enter(), which is
used to cancel jobs.
After this patch drain no longer runs extra blockjob iterations. This
is the expected behavior that qemu-iotests 185 used to rely on. We
temporarily changed the 185 test output to make it pass for the QEMU
2.12 release but now it's time to address this issue.
Cc: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Message-id: 20180508135436.30140-3-stefanha@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Commit 8565c3ab53 ("qemu-iotests: fix
185") identified a race condition in a sub-test.
Similar issues also affect the other sub-tests. If disk I/O completes
quickly, it races with the QMP 'quit' command. This causes spurious
test failures because QMP events are emitted in an unpredictable order.
This test relies on QEMU internals and there is no QMP API for getting
deterministic behavior needed to make this test 100% reliable. At the
same time, the test is useful and it would be a shame to remove it.
Add sleep 0.5 to reduce the chance of races. This is not a real fix but
appears to reduce spurious failures in practice.
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180508135436.30140-2-stefanha@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
COR across nodes (that is, you have some filter node between the
actually COR target and the node that performs the COR) cannot reliably
work together with the permission system when there is no explicit COR
node that can request the WRITE_UNCHANGED permission for its child.
This is because COR (currently) sneaks its requests by the usual
permission checks, so it can work without a WRITE* permission; but if
there is a filter node in between, that will re-issue the request, which
then passes through the usual check -- and if nobody has requested a
WRITE_UNCHANGED permission, that check will fail.
There is no real direct fix apart from hoping that there is someone who
has requested that permission; in case of just the qemu-io HMP command
(and no guest device), however, that is not the case. The real real fix
is to implement the copy-on-read flag through an implicitly added COR
node. Such a node can request the necessary permissions as shown in
this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180421132929.21610-10-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
iotest 197 tests copy-on-read using the (now old) copy-on-read flag.
Copy it to 215 and modify it to use the COR filter driver instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180421132929.21610-9-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-8-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
userfaultfd support depends on the host kernel, so it may not be
available. If so, 181 and 201 should be skipped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180406151731.4285-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, common.qemu only allows to match for results indicating
success. The only way to fail is by provoking a timeout. However,
sometimes we do have a defined failure output and can match for that,
which saves us from having to wait for the timeout in case of failure.
Because failure can sometimes just result in a _notrun in the test, it
is actually important to care about being able to fail quickly.
Also, sometimes we simply do not get any specific output in case of
success. The only way to handle this currently would be to define an
error message as the string to look for, which means that actual success
results in a timeout. This is really bad because it unnecessarily slows
down a succeeding test.
Therefore, this patch adds a new parameter $success_or_failure to
_timed_wait_for and _send_qemu_cmd. Setting this to a non-empty string
makes both commands expect two match parameters: If the first matches,
the function succeeds. If the second matches, the function fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180406151731.4285-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The L2 and refcount caches have default sizes that can be overridden
using the l2-cache-size and refcount-cache-size (an additional
parameter named cache-size sets the combined size of both caches).
Unless forced by one of the aforementioned parameters, QEMU will set
the unspecified sizes so that the L2 cache is 4 times larger than the
refcount cache.
This is based on the premise that the refcount metadata needs to be
only a fourth of the L2 metadata to cover the same amount of disk
space. This is incorrect for two reasons:
a) The amount of disk covered by an L2 table depends solely on the
cluster size, but in the case of a refcount block it depends on
the cluster size *and* the width of each refcount entry.
The 4/1 ratio is only valid with 16-bit entries (the default).
b) When we talk about disk space and L2 tables we are talking about
guest space (L2 tables map guest clusters to host clusters),
whereas refcount blocks are used for host clusters (including
L1/L2 tables and the refcount blocks themselves). On a fully
populated (and uncompressed) qcow2 file, image size > virtual size
so there are more refcount entries than L2 entries.
Problem (a) could be fixed by adjusting the algorithm to take into
account the refcount entry width. Problem (b) could be fixed by
increasing a bit the refcount cache size to account for the clusters
used for qcow2 metadata.
However this patch takes a completely different approach and instead
of keeping a ratio between both cache sizes it assigns as much as
possible to the L2 cache and the remainder to the refcount cache.
The reason is that L2 tables are used for every single I/O request
from the guest and the effect of increasing the cache is significant
and clearly measurable. Refcount blocks are however only used for
cluster allocation and internal snapshots and in practice are accessed
sequentially in most cases, so the effect of increasing the cache is
negligible (even when doing random writes from the guest).
So, make the refcount cache as small as possible unless the user
explicitly asks for a larger one.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 9695182c2eb11b77cb319689a1ebaa4e7c9d6591.1523968389.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit abd3622cc0 added a case to 122
regarding how the qcow2 driver handles an incorrect compressed data
length value. This does not really fit into 122, as that file is
supposed to contain qemu-img convert test cases, which this case is not.
So this patch splits it off into its own file; maybe we will even get
more qcow2-only compression tests in the future.
Also, that test case does not work with refcount_bits=1, so mark that
option as unsupported.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180406164108.26118-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We already have an extensive mirror test (041) which does cover
cancelling a mirror job, especially after it has emitted the READY
event. However, it does not check what exact events are emitted after
block-job-cancel is executed. More importantly, it does not use
throttling to ensure that it covers the case of block-job-cancel before
READY.
It would be possible to add this case to 041, but considering it is
already our largest test file, it makes sense to create a new file for
these cases.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180501220509.14152-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Commit b76e4458b1 ("block/mirror: change
the semantic of 'force' of block-job-cancel") accidentally removed the
ratelimit in the mirror job.
Reintroduce the ratelimit but keep the block-job-cancel force=true
behavior that was added in commit
b76e4458b1.
Note that block_job_sleep_ns() returns immediately when the job is
cancelled. Therefore it's safe to unconditionally call
block_job_sleep_ns() - a cancelled job does not sleep.
This commit fixes the non-deterministic qemu-iotests 185 output. The
test relies on the ratelimit to make the job sleep until the 'quit'
command is processed. Previously the job could complete before the
'quit' command was received since there was no ratelimit.
Cc: Liang Li <liliang.opensource@gmail.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180424123527.19168-1-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Improve and fix 169:
- use MIGRATION events instead of RESUME
- make a TODO: enable dirty-bitmaps capability for offline case
- recreate vm_b without -incoming near test end
This (likely) fixes racy faults at least of the following types:
- timeout on waiting for RESUME event
- sha256 mismatch on line 136 (142 after this patch)
- fail to self.vm_b.launch() on line 135 (141 now after this patch)
And surely fixes cat processes, left after test finish.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180411122606.367301-3-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 4486e89c21 ("vl: introduce
vm_shutdown()") added a bdrv_drain_all() call. As a side-effect of the
drain operation the block job iterates one more time than before. The
185 output no longer matches and the test is failing now.
It may be possible to avoid the superfluous block job iteration, but
that type of patch is not suitable late in the QEMU 2.12 release cycle.
This patch simply updates the 185 output file. The new behavior is
correct, just not optimal, so make the test pass again.
Fixes: 4486e89c21 ("vl: introduce vm_shutdown()")
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-iotests doesn't support dmg, and the dmg block driver doesn't
support image creation. Two test cases declare dmg as supported, but
that's obviously wrong for both reasons. Remove the declaration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Blacklist these formats, as they don't support image creation, as they
say:
> ./qemu-img create -f bochs x 1m
qemu-img: x: Format driver 'bochs' does not support image creation
> ./qemu-img create -f cloop x 1m
qemu-img: x: Format driver 'cloop' does not support image creation
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Support "generic" formats like in bash tests with their
_supported_fmt generic
The test, supporting "generic" formats will run if IMGFMT_GENERIC =
true, which is default, except for bochs and cloop. However, you can
use verify_image_format(['generic', 'bochs']), which will run for all
except cloop (for this moment).
Also, add an assert (we don't want set both arguments) and remove
duplication.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If there are more than one events, wait_until_completed() might return
the 2nd event even if the 1st event is JOB_COMPLETED, since the for loop
will continue to run even if completed is set to True.
It never happened before, but it can be triggered when OOB is enabled
due to the RESUME startup message. Fix that up.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180408030542.17855-1-peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaw6CJAAoJEPQH2wBh1c9AZvcIAL51TsxzLBfYbEr7t/OqaYcT
KptgkLn8UPUsVwEaZ1i9T+qpPqUhCgUeqBki4wTpGOfwmRO633L81lhlvLU1RD5f
a9qsIWtvG0eYw+BU4P+ojltufdeQRQMxuLVhoiq2ur9vC8zUy6tEnF+yqOdWHYsm
83Z2T/NFZ192zIwPD3Rq9/+ijllJOhODrHdAcnwBp0IuvlXi5FV7GjccB4scW/Ym
LwDe7cNWv0XlzRlosyhTRs0HiOm+XiLAj5t9dVKFiuZsUwGFEXx6GiRtUutDf1j8
5ham2wiYLsvxnSgRoUk486Txuj2ceNYDOvnllSv3uFh2kZyTaYewOL1acQFmtVw=
=5AX/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-2018-04-03' into queue-block
A fix for preallocated truncation, a new iotest, and a fix to make the iotests work more comfortably on ppc64
# gpg: Signature made Tue Apr 3 17:40:57 2018 CEST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* mreitz/tags/pull-block-2018-04-03:
iotests: Test abnormally large size in compressed cluster descriptor
qemu-iotests: Use ppc64 qemu_arch on ppc64le host
iotests: Test preallocated truncate of 2G image
block/file-posix: Fix fully preallocated truncate
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
L2 entries for compressed clusters have a field that indicates the
number of sectors used to store the data in the image.
That's however not the size of the compressed data itself, just the
number of sectors where that data is located. The actual data size is
usually not a multiple of the sector size, and therefore cannot be
represented with this field.
The way it works is that QEMU reads all the specified sectors and
starts decompressing the data until there's enough to recover the
original uncompressed cluster. If there are any bytes left that
haven't been decompressed they are simply ignored.
One consequence of this is that even if the size field is larger than
it needs to be QEMU can handle it just fine: it will read more data
from disk but it will ignore the extra bytes.
This test creates an image with two compressed clusters that use 5
sectors (2.5 KB) each, increases the size field to the maximum (8192
sectors, or 4 MB) and verifies that the data can be read without
problems.
This test is important because while the decompressed data takes
exactly one cluster, the maximum value allowed in the compressed size
field is twice the cluster size. So although QEMU won't produce images
with such large values we need to make sure that it can handle them.
Another effect of increasing the size field is that it can make
it include data from the following host cluster(s). In this case
'qemu-img check' will detect that the refcounts are not correct, and
we'll need to rebuild them.
Additionally, this patch also tests that decreasing the size corrupts
the image since the original data can no longer be recovered. In this
case QEMU returns an error when trying to read the compressed data,
but 'qemu-img check' doesn't see anything wrong if the refcounts are
consistent.
One possible task for the future is to make 'qemu-img check' verify
the sizes of the compressed clusters, by trying to decompress the data
and checking that the size stored in the L2 entry is correct.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180329120745.11154-1-berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The qemu target does not always correspond to the host machine type. For
example ppc64le machine target is ppc64. Let's introduce "qemu_arch"
variable to store the matching qemu architecture related to the current
architecture and use it when auto-detecting the default qemu binary.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Message-id: 20180329112053.5399-2-ldoktor@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180228131315.30194-3-mreitz@redhat.com
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Support luks images creatins like in 205
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit ac64273c66 modified the output of iotest 186, changing
the QOM path of floppy drives from /machine/unattached/device[17] to
/machine/unattached/device[13].
Instead of updating the test output to reflect this change, this patch
adds a new filter that hides all QOM paths from the 'Attached to:'
line of the 'info block' command.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SCSI controllers are no longer created automatically for
-drive if=scsi, so this patch updates the tests that relied
on that.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
patch keeping us from creating too large extents.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauVVBAAoJEPQH2wBh1c9AGtYIAJ1ojl6+guKQHjtzv9W8ch50
2tzH9/lFkhq/Tyay8MCcq1dWQr23tKqusxi6fDHVdc8XIx6fDuPFzWxUQwwLvS81
9CA6Qs2NngkiAs89ZZ0Sc9aj+LzFbKvXDXPYd4FFeLVVzD0CA4qghH5THrrH6LRm
4DoRUK1QejrOC0v2zCRQvEN6RlI6WFGCf9YiYKkdrvswnjtLgOobCt7TvC9Nade2
smGyxtDENkV6bAZgQgxMAlf88GCyKslb4Fu6U+sfKMDejWmlYEREbBsQc+/Gp6Af
R6ZeiXEJ+KUF34RktPTmhJlUbzRc4Mw0Ij7Abrfhtpre9hifIp62XSrM8sasgLo=
=k+ly
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2018-03-26' into staging
A fix for dirty bitmap migration through shared storage, and a VMDK
patch keeping us from creating too large extents.
# gpg: Signature made Mon 26 Mar 2018 21:17:05 BST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2018-03-26:
vmdk: return ERROR when cluster sector is larger than vmdk limitation
iotests: enable shared migration cases in 169
qcow2: fix bitmaps loading when bitmaps already exist
qcow2-bitmap: add qcow2_reopen_bitmaps_rw_hint()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shared migration for dirty bitmaps is fixed by previous patches,
so we can enable the test.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180320170521.32152-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This tests that the .bdrv_truncate implementation for luks doesn't crash
for invalid image sizes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to test resizing even for luks. The only change that is needed
is to explicitly zero out new space for luks because it's undefined.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When we try to allocate new clusters we first look for available ones
starting from s->free_cluster_index and once we find them we increase
their reference counts. Before we get to call update_refcount() to do
this last step s->free_cluster_index is already pointing to the next
cluster after the ones we are trying to allocate.
During update_refcount() it may happen however that we also need to
allocate a new refcount block in order to store the refcounts of these
new clusters (and to complicate things further that may also require
us to grow the refcount table). After all this we don't know if the
clusters that we originally tried to allocate are still available, so
we return -EAGAIN to ask the caller to restart the search for free
clusters.
This is what can happen in a common scenario:
1) We want to allocate a new cluster and we see that cluster N is
free.
2) We try to increase N's refcount but all refcount blocks are full,
so we allocate a new one at N+1 (where s->free_cluster_index was
pointing at).
3) Once we're done we return -EAGAIN to look again for a free
cluster, but now s->free_cluster_index points at N+2, so that's
the one we allocate. Cluster N remains unallocated and we have a
hole in the qcow2 file.
This can be reproduced easily:
qemu-img create -f qcow2 -o cluster_size=512 hd.qcow2 1M
qemu-io -c 'write 0 124k' hd.qcow2
After this the image has 132608 bytes (256 clusters), and the refcount
block is full. If we write 512 more bytes it should allocate two new
clusters: the data cluster itself and a new refcount block.
qemu-io -c 'write 124k 512' hd.qcow2
However the image has now three new clusters (259 in total), and the
first one of them is empty (and unallocated):
dd if=hd.qcow2 bs=512c skip=256 count=1 | hexdump -C
If we write larger amounts of data in the last step instead of the 512
bytes used in this example we can create larger holes in the qcow2
file.
What this patch does is reset s->free_cluster_index to its previous
value when alloc_refcount_block() returns -EAGAIN. This way the caller
will try to allocate again the original clusters if they are still
free.
The output of iotest 026 also needs to be updated because now that
images have no holes some tests fail at a different point and the
number of leaked clusters is different.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Testing on ext4, most 'quick' qcow2 tests took less than 5 seconds,
but 163 took more than 20. Let's remove it from the quick set.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of converting all "backing": null instances into "backing": "",
handle a null value directly in bdrv_open_inherit().
This enables explicitly null backing links for json:{} filenames.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-7-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() parameter order and qapi headers split]
Signed-off-by: Eric Blake <eblake@redhat.com>
CentOS 6 lacks a realpath binary on the base install, which makes
all iotests runs fail since the 2.11 release:
001 - output mismatch (see 001.out.bad)
./check: line 815: realpath: command not found
diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out'
diff: Try `diff --help' for more information.
Many of the uses of 'realpath' in the check script were being
used on the output of 'type -p' - but that is already an
absolute file name. While a canonical name can often be
shorter (realpath gets rid of /../), it can also be longer (due
to symlink expansion); and we really don't care if the name is
canonical, merely that it was an executable file with an
absolute path. These were broken in commit cceaf1db.
The remaining use of realpath was to convert a possibly relative
filename into an absolute one before calling diff to make it
easier to copy-and-paste the filename for moving the .bad file
into place as the new reference file even when running iotests
out-of-tree (see commit 93e53fb6), but $PWD can achieve the same
purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit bff5554843 added "force_size" into the common.filter for
_filter_img_create(), but test 146 still expects it in the output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Originally we added parallels as a read-only format to qemu-iotests
where we did just some tests with a binary image. Since then, write and
image creation support has been added to the driver, so we can now
enable it in _supported_fmt generic.
The driver doesn't support migration yet, though, so we need to add it
to the list of exceptions in 181.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Expose the "manual" property via QAPI for the backup-related jobs.
As of this commit, this allows the management API to request the
"concluded" and "dismiss" semantics for backup jobs.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Split out the pause command into the actual pause and the wait.
Not every usage presently needs to resubmit a pause request.
The intent with the next commit will be to explicitly disallow
redundant or meaningless pause/resume requests, so the tests
need to become more judicious to reflect that.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We're about to add several new states, and booleans are becoming
unwieldly and difficult to reason about. It would help to have a
more explicit bookkeeping of the state of blockjobs. To this end,
add a new "status" field and add our existing states in a redundant
manner alongside the bools they are replacing:
UNDEFINED: Placeholder, default state. Not currently visible to QMP
unless changes occur in the future to allow creating jobs
without starting them via QMP.
CREATED: replaces !!job->co && paused && !busy
RUNNING: replaces effectively (!paused && busy)
PAUSED: Nearly redundant with info->paused, which shows pause_count.
This reports the actual status of the job, which almost always
matches the paused request status. It differs in that it is
strictly only true when the job has actually gone dormant.
READY: replaces job->ready.
STANDBY: Paused, but job->ready is true.
New state additions in coming commits will not be quite so redundant:
WAITING: Waiting on transaction. This job has finished all the work
it can until the transaction converges, fails, or is canceled.
PENDING: Pending authorization from user. This job has finished all the
work it can until the job or transaction is finalized via
block_job_finalize. This implies the transaction has converged
and left the WAITING phase.
ABORTING: Job has encountered an error condition and is in the process
of aborting.
CONCLUDED: Job has ceased all operations and has a return code available
for query and may be dismissed via block_job_dismiss.
NULL: Job has been dismissed and (should) be destroyed. Should never
be visible to QMP.
Some of these states appear somewhat superfluous, but it helps define the
expected flow of a job; so some of the states wind up being synchronous
empty transitions. Importantly, jobs can be in only one of these states
at any given time, which helps code and external users alike reason about
the current condition of a job unambiguously.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test
- start two vms (vm_a, vm_b)
- in a
- do writes from set A
- do writes from set B
- fix bitmap sha256
- clear bitmap
- do writes from set A
- start migration
- than, in b
- wait vm start (postcopy should start)
- do writes from set B
- check bitmap sha256
The test should verify postcopy migration and then merging with delta
(changes in target, during postcopy process).
Reduce supported cache modes to only 'none', because with cache on time
from source.STOP to target.RESUME is unpredictable and we can fail with
timout while waiting for target.RESUME.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180313180320.339796-14-vsementsov@virtuozzo.com
The test starts two vms (vm_a, vm_b), create dirty bitmap in
the first one, do several writes to corresponding device and
then migrate vm_a to vm_b.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180313180320.339796-13-vsementsov@virtuozzo.com
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180312152126.286890-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Simple way to have auto generated filenames with auto cleanup. Like
FilePath but without using 'with' statement and without additional
indentation of the whole test.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180312152126.286890-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180312152126.286890-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This test case adds an NBD server export and then invokes
blockdev-snapshot-sync, which changes the BlockDriverState node that the
NBD server's BlockBackend points to. This is an interesting scenario to
test and exercises the code path fixed by the previous commit.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180306204819.11266-3-stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit afe35cde6 added additional actions to test 33, but forgot
to reset the image between tests. As a result, './check -nbd 33'
fails because the qemu-nbd process from the first half is still
occupying the port, preventing the second half from starting a
new qemu-nbd process. Worse, the failure leaves a rogue qemu-nbd
process behind even after the test fails, which causes knock-on
failures to later tests that also want to start qemu-nbd.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180312211156.452139-1-eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
There is a race between the test's 'query-migrate' QMP command after the
QMP 'STOP' event and completing the migration:
The test case invokes 'query-migrate' upon receiving 'STOP'. At this
point the migration thread may still be in the process of completing.
Therefore 'query-migrate' can return 'status': 'active' for a brief
window of time instead of 'status': 'completed'. This results in
qemu-iotests 203 hanging.
Solve the race by enabling the 'events' migration capability, which
causes QEMU to emit migration-specific QMP events that do not suffer
from this race condition. Wait for the QMP 'MIGRATION' event with
'status': 'completed'.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180305155926.25858-1-stefanha@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch tweaks TestParallelOps in iotest 030 so it allocates data
in smaller regions (256KB/512KB instead of 512KB/1MB) and the
block-stream job in test_stream_commit() only needs to copy data that
is at the very end of the image.
This way when the block-stream job is awakened it will finish right
away without any chance of being stopped by block_job_sleep_ns(). This
triggers the bug that was fixed by 3d5d319e12 and
1a63a90750 and is therefore a more useful test
case for parallel block jobs.
After this patch the aforementiond bug can also be reproduced with the
test_stream_parallel() test case.
Since with this change the stream job in test_stream_commit() finishes
early, this patch introduces a similar test case where both jobs are
slowed down so they can actually run in parallel.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Cc: John Snow <jsnow@redhat.com>
Message-id: 20180306130121.30243-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The AFL image is to exercise the code validating image size, which
doesn't work on 32 bit or when out of memory (there is a large
allocation before the interesting point). So check that and skip the
test, instead of faking the result.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180301011413.11531-1-famz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The majority of our iotests have the executable bit set; fix the
few outliers for consistency.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20180305161824.7188-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of manually creating the BlockdevCreateOptions object, use a
visitor to parse the given options into the QAPI object.
This involves translation from the old command line syntax to the syntax
mandated by the QAPI schema. Option names are still checked against
qcow2_create_opts, so only the old option names are allowed on the
command line, even if they are translated in qcow2_create().
In contrast, new option values are optionally recognised besides the old
values: 'compat' accepts 'v2'/'v3' as an alias for '0.10'/'1.1', and
'encrypt.format' accepts 'qcow' as an alias for 'aes' now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'qemu-img check' cannot detect if a snapshot's L1 table is corrupted.
This patch checks the table's offset and size and reports corruption
if the values are not valid.
This patch doesn't add code to fix that corruption yet, only to detect
and report it.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function deletes a snapshot from disk, removing its entry from
the snapshot table, freeing its L1 table and decreasing the refcounts
of all clusters.
The L1 table offset and size are however not validated. If we use
invalid values in this function we'll probably corrupt the image even
more, so we should return an error instead.
We now have a function to take care of this, so let's use it.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function copies a snapshot's L1 table into the active one without
validating it first.
We now have a function to take care of this, so let's use it.
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz
Peter Maydell
Vladimir Sementsov-Ogievskiy
Stefan Weil
Cleber Rosa
Markus Armbruster
Kevin Wolf
Leonid Bloch
Fam Zheng
Alberto Garcia
Jeff Cody
John Snow
Peter Lieven
Eric Blake
Peter Xu
Thomas Huth
Eduardo Habkost
Stefan Hajnoczi
Lukáš Doktor