This commit adds a error_init() helper which calls
g_log_set_default_handler() so that glib logs (g_log, g_warning, ...)
are handled similarly to other QEMU logs. This means they will get a
timestamp if timestamps are enabled, and they will go through the
HMP monitor if one is configured.
This commit also adds a call to error_init() to the binaries
installed by QEMU. Since error_init() also calls error_set_progname(),
this means that *-linux-user, *-bsd-user and qemu-pr-helper messages
output with error_report, info_report, ... will slightly change: they
will be prefixed by the binary name.
glib debug messages are enabled through G_MESSAGES_DEBUG similarly to
the glib default log handler.
At the moment, this change will mostly impact SPICE logging if your
spice version is >= 0.14.1. With older spice versions, this is not going
to work as expected, but will not have any ill effect, so this call is
not conditional on the SPICE version.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190131164614.19209-3-cfergeau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu-io reimplements itself what
error_get_progname()/error_set_progname() already does.
This commit switches it to use this API from qemu-error.h
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190131164614.19209-2-cfergeau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. user_creatable_add_opts_foreach() does that, and then
fails without setting an error. Its caller main(), via
qemu_opts_foreach(), is fine with it, but clean it up anyway.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-20-armbru@redhat.com>
Currently, qemu-io basically always returns success when it gets to
interactive mode (so once the whole command line has been parsed; even
before the commands on the command line are interpreted). That is not
very useful.
This patch makes qemu-io return failure when any of the executed
commands failed.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1519617
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509194302.21585-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is basically what everything else in the qemu code base does, so we
can do it here, too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509194302.21585-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
For qemu-io, a function returns an integer with two possible values: 0
for "qemu-io may continue execution", or 1 for "qemu-io should exit".
However, there is only a single command that returns 1, and that is
"quit".
So let's turn this case into a global variable instead so we can make
better use of the return value in a later patch.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509194302.21585-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, qemu-io only uses string-valued blockdev options (as all are
converted directly from QemuOpts) -- with one exception: -U adds the
force-share option as a boolean. This in itself is already a bit
questionable, but a real issue is that it also assumes the value already
existing in the options QDict would be a boolean, which is wrong.
That has the following effect:
$ ./qemu-io -r -U --image-opts \
driver=file,filename=/dev/null,force-share=off
[1] 15200 segmentation fault (core dumped) ./qemu-io -r -U
--image-opts driver=file,filename=/dev/null,force-share=off
Since @opts is converted from QemuOpts, the value must be a string, and
we have to compare it as such. Consequently, it makes sense to also set
it as a string instead of a boolean.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
basename(3) and dirname(3) modify their argument and may return
pointers to statically allocated memory which may be overwritten by
subsequent calls.
g_path_get_basename and g_path_get_dirname have no such issues, and
therefore more preferable.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <1519888086-4207-1-git-send-email-jusual@mail.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-io puts the TTY into non-canonical mode, which means no EOF processing is
done and thus getchar() will never return the EOF constant. Instead we have to
query the TTY attributes to determine the configured EOF character (usually
Ctrl-D / 0x4), and then explicitly check for that value. This fixes the
regression that prevented Ctrl-D from triggering an exit of qemu-io that has
existed since readline was first added in
commit 0cf17e1817
Author: Stefan Hajnoczi <stefanha@redhat.com>
Date: Thu Nov 14 11:54:17 2013 +0100
qemu-io: use readline.c
It also ensures that a newline is printed when exiting, to complete the
line output by the "qemu-io> " prompt.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-15-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
Make it easier to enable copy-on-read during iotests, by
exposing a new bool option to main and open.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These days, many programs are including a bug-reporting address,
or better yet, a link to the project web site, at the tail of
their --help output. However, we were not very consistent at
doing so: only qemu-nbd and qemu-qa mentioned anything, with the
latter pointing to an individual person instead of the project.
Add a new #define that sets up a uniform string, mentioning both
bug reporting instructions and overall project details, and which
a downstream vendor could tweak if they want bugs to go to a
downstream database. Then use it in all of our binaries which
have --help output.
The canned text intentionally references http:// instead of https://
because our https website currently causes certificate errors in
some browsers. That can be tweaked later once we have resolved the
web site issued.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170803163353.19558-5-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include the package version information (useful for detecting
builds from git or downstream backports), and the copyright notice.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20170803163353.19558-3-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that qcow & qcow2 are wired up to get encryption keys
via the QCryptoSecret object, nothing is relying on the
interactive prompting for passwords. All the code related
to password prompting can thus be ripped out.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-17-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Most callback commands in qemu-io return 0 to keep the interpreter
loop running, or 1 to quit immediately. However, open_f() just
passed through the return value of openfile(), which has different
semantics of returning 0 if a file was opened, or 1 on any failure.
As a result of mixing the return semantics, we are forcing the
qemu-io interpreter to exit early on any failures, which is rather
annoying when some of the failures are obviously trying to give
the user a hint of how to proceed (if we didn't then kill qemu-io
out from under the user's feet):
$ qemu-io
qemu-io> open foo
qemu-io> open foo
file open already, try 'help close'
$ echo $?
0
In general, we WANT openfile() to report failures, since it is the
function used in the form 'qemu-io -c "$something" no_such_file'
for performing one or more -c options on a single file, and it is
not worth attempting $something if the file itself cannot be opened.
So the solution is to fix open_f() to always return 0 (when we are
in interactive mode, even failure to open should not end the
session), and save the return value of openfile() for command line
use in main().
Note, however, that we do have some qemu-iotests that do 'qemu-io
-c "open file" -c "$something"'; such tests will now proceed to
attempt $something whether or not the open succeeded, the same way
as if the two commands had been attempted in interactive mode. As
such, the expected output for those tests has to be modified. But it
also means that it is now possible to use -c close and have a single
qemu-io command line operate on more than one file even without
using interactive mode. Although the '-c open' action is a subtle
change in behavior, remember that qemu-io is for debugging purposes,
so as long as it serves the needs of qemu-iotests while still being
reasonable for interactive use, it should not be a problem that we
are changing tests to the new behavior.
This has been awkward since at least as far back as commit
e3aff4f, in 2009.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam's addition of --force-share in commits 459571f7 and 335e9937
were developed prior to the addition of QDict scalar insertion
macros, but merged after the general cleanup in commit 46f5ac20.
Patch created mechanically by rerunning:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515195439.17677-1-eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add --force-share/-U to program options and -U to open subcommand.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The result of openfile was not checked, leading to failure deep in the
actual command with confusing error message, and exiting with exit code 0.
Here is a simple example - trying to read with the wrong format:
$ touch file
$ qemu-io -f qcow2 -c 'read -P 1 0 1024' file; echo $?
can't open device file: Image is not in qcow2 format
no file open, try 'help open'
0
With this patch, we fail earlier with exit code 1:
$ ./qemu-io -f qcow2 -c 'read -P 1 0 1024' file; echo $?
can't open device file: Image is not in qcow2 format
1
Failing earlier, we don't log this error now:
no file open, try 'help open'
But some tests expected it; the line was removed from the test output.
Signed-off-by: Nir Soffer <nirsof@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170201003120.23378-2-nirsof@gmail.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Remove the notion of there being a single global array
of trace events, by introducing a method for registering
groups of events.
The module_call_init() needs to be invoked at the start
of any program that wants to make use of the trace
support. Currently this covers system emulators qemu-nbd,
qemu-img and qemu-io.
[Squashed the following fix from Daniel P. Berrange
<berrange@redhat.com>:
linux-user/bsd-user: initialize trace events subsystem
The bsd-user/linux-user programs make use of the CPU emulation
code and this now requires that the trace events subsystem
is enabled, otherwise it'll crash trying to allocate an empty
trace events bitmap for the CPU object.
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Moving trace_init_backends() into trace_opt_parse() is not possible. This
should be called after daemonize() in vl.c.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-5-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In addition to making the code simpler, this will replace the
long error messages:
cannot initialize crypto: Unable to initialize GNUTLS library: [...]
cannot initialize crypto: Unable to initialize gcrypt
with shorter messages:
Unable to initialize GNUTLS library: [...]
Unable to initialize gcrypt
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The command line defaults to BDRV_O_UNMAP, but can use
-d to reset it. Meanwhile, the 'open' subcommand was
defaulting to no discards, with no way to set it.
The command line has both -n and -tMODE to set a variety
of cache modes, but the 'open' subcommand had only -n.
The 'open' subcommand had no way to set BDRV_O_NATIVE_AIO.
Note that the 'reopen' subcommand uses '-c' where the
command line and 'open' use -t. Making that consistent
would be a separate patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1462677405-4752-3-git-send-email-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The Usage: summary is missing several options, but rather than
having to maintain it, it's simpler to just state [OPTIONS],
since the options are spelled out below.
Commit 499afa2 added --image-opts, but forgot to document it in
--help. Likewise for commit 9e8f183 and -d/--discard.
Commit e3aff4f6 put "-o/--offset" in the long opts, but it has
never been honored.
Add a note that '-n' is short for '-t none'.
Commit 9a2d77ad killed the -C option, but forgot to undocument
it for the 'open' subcommand.
Finally, commit 10d9d75 removed -g/--growable, but forgot to
cull it from the valid short options.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1462677405-4752-2-git-send-email-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
qemu_opts_foreach() runs its callback with the error location set to
the option's location. Any errors the callback reports use the
option's location automatically.
Commit 90998d5 moved the actual error reporting from "inside"
qemu_opts_foreach() to after it. Here's a typical hunk:
if (qemu_opts_foreach(qemu_find_opts("object"),
- object_create,
- object_create_initial, NULL)) {
+ user_creatable_add_opts_foreach,
+ object_create_initial, &err)) {
+ error_report_err(err);
exit(1);
}
Before, object_create() reports from within qemu_opts_foreach(), using
the option's location. Afterwards, we do it after
qemu_opts_foreach(), using whatever location happens to be current
there. Commonly a "none" location.
This is because Error objects don't have location information.
Problematic.
Reproducer:
$ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar
qemu-system-x86_64: Property '.foo' not found
Note no location. This commit restores it:
qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found
Note that the qemu_opts_foreach() bug just fixed could mask the bug
here: if the location it leaves dangling hasn't been clobbered, yet,
it's the correct one.
Reported-by: Eric Blake <eblake@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Paragraph on Error added to commit message]
Any programs which call the qcrypto APIs should ensure that
qcrypto_init() has been called before anything else which
can use crypto. Essentially this means right at the start
of the main method before initializing anything else.
This is important because some versions of gnutls/gcrypt
require explicit initialization before use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Tested-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qemu-img/qemu-io tools prompt for disk encryption passwords
regardless of whether any are actually required. Adding a check
on bdrv_key_required() avoids this prompt for disk formats which
have been converted to the QCryptoSecret APIs.
This is just a temporary hack to ensure the block I/O tests
continue to work after each patch, since the last patch will
completely delete all the password prompting code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before this patch, blk_new() automatically assigned a name to the new
BlockBackend and considered it referenced by the monitor. This patch
removes the implicit monitor_add_blk() call from blk_new() (and
consequently the monitor_remove_blk() call from blk_delete(), too) and
thus blk_new() (and related functions) no longer take a BB name
argument.
In fact, there is only a single point where blk_new()/blk_new_open() is
called and the new BB is monitor-owned, and that is in blockdev_init().
Besides thus relieving us from having to invent names for all of the BBs
we use in qemu-img, this fixes a bug where qemu cannot create a new
image if there already is a monitor-owned BB named "image".
If a BB and its BDS tree are created in a single operation, as of this
patch the BDS tree will be created before the BB is given a name
(whereas it was the other way around before). This results in minor
change to the output of iotest 087, whose reference output is amended
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When declaring the 'struct option' array, use the standard
constants no_argument/required_argument, instead of magic
values 0 and 1.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently qemu-io allows an image filename to be passed on the
command line, but unless using the JSON format, it does not have
a way to set any options except the format eg
qemu-io https://127.0.0.1/images/centos7.iso
qemu-io /home/berrange/demo.qcow2
By contrast when using the interactive shell, it is possible to
use --option with the 'open' command, or to omit the filename.
This adds a --image-opts arg that indicates that the positional
filename should be interpreted as a full option string, not
just a filename.
qemu-io --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off
qemu-io --image-opts driver=qcow2,file.filename=/home/berrange/demo.qcow2
This flag is mutually exclusive with the '-f' flag and with
the '-o' flag to the 'open' command
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow creation of user creatable object types with qemu-io
via a new --object command line arg. This will be used to supply
passwords and/or encryption keys to the various block driver
backends via the recently added 'secret' object type.
# printf letmein > mypasswd.txt
# qemu-io --object secret,id=sec0,file=mypasswd.txt \
...other args...
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This converts the NBD block driver client to use the QIOChannelSocket
class for initial connection setup. The NbdClientSession struct has
two pointers, one to the master QIOChannelSocket providing the raw
data channel, and one to a QIOChannel which is the current channel
used for I/O. Initially the two point to the same object, but when
TLS support is added, they will point to different objects.
The qemu-img & qemu-io tools now need to use MODULE_INIT_QOM to
ensure the QIOChannel object classes are registered. The qemu-nbd
tool already did this.
In this initial conversion though, all I/O is still actually done
using the raw POSIX sockets APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is cleaner, and improves error reporting with -daemonize.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-4-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is cleaner and has two advantages. First, it improves error
reporting with -daemonize. Second, multiple "-trace events" options
now cumulate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-3-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just three instances left.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-16-git-send-email-armbru@redhat.com>
qemu_opts_parse_noisily() already prints an error message with the exact
reason why the parsing failed. No need to add another less specific one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
The only remaining user in qemu-option.c is qemu_opts_parse(). Is it
used in QMP context? If not, we can simply replace
qerror_report_err() by error_report_err().
The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.
The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.
Remaining uses:
* drive_def(): Command line -drive and such, HMP drive_add and pci_add
* hmp_chardev_add(): HMP chardev-add
* monitor_parse_command(): HMP core
* tmp_config_parse(): Command line -tpmdev
* net_host_device_add(): HMP host_net_add
* net_client_parse(): Command line -net and -netdev
* qemu_global_option(): Command line -global
* vnc_parse_func(): Command line -display, -vnc, default display, HMP
change, QMP change. Bummer.
* qemu_pci_hot_add_nic(): HMP pci_add
* usb_net_init(): Command line -usbdevice, HMP usb_add
Propagate errors through qemu_opts_parse(). Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err(). Switch all non-QMP users outside tests to it.
That leaves vnc_parse_func(). Propagate errors through it. Since I'm
touching it anyway, rename it to vnc_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The qemu-io tool does not check if the image is encrypted so
historically would silently corrupt the sectors by writing
plain text data into them instead of cipher text. The earlier
commit turns this mistake into a fatal abort, so check for
encryption and prompt for key when required.
This enables us to add unit tests to ensure we don't break
the ability of qemu-img to convert existing encrypted qcow2
files into a non-encrypted format.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
POSIX says getopt() returns -1 on completion. While Linux happens
to define EOF as -1, this definition is not required by POSIX, and
there may be platforms where checking for EOF instead of -1 would
lead to an infinite loop.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-io should behave like a guest, therefore it should use BlockBackend
to access the block layer.
There are a couple of places where that is infeasible: First, the
bdrv_debug_* functions could theoretically be mirrored in the
BlockBackend, but since these are functions internal to the block layer,
they should not be visible externally (qemu-io as a test tool is exempt
from this).
Second, bdrv_get_info() and bdrv_get_specific_info() work on a single
BDS alone, therefore they should stay BDS-specific.
Third, bdrv_is_allocated() mainly works on a single BDS as well. Some
data may be passed through from the BDS's file (if sectors which are
apparently allocated in the file are not really allocated there but just
zero).
[Fixed conflicts around block_acct_start() usage from Fam Zheng's
"qemu-io: Account IO by aio_read and aio_write" commit. Use
BlockBackend and blk_get_stats() instead of BlockDriverState.
--Stefan]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-14-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove "growable" option from the "open" command and from the qemu-io
command line. qemu-io is about to be converted to BlockBackend which
will make sure that no request exceeds the image size, so the only way
to keep "growable" would be to use BlockBackend if it is not given and
to directly access the BDS if it is.
qemu-io is a debugging tool, therefore removing a rarely used option
will have only a very small impact, if any. There was only one
qemu-iotest which used the option; since it is not critical, this patch
just removes it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-13-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
