Commit Graph

82 Commits

Author SHA1 Message Date
Serge Belyshev b13e49bc86 linux-user: Move generic TARGET_RLIMIT* definitions to generic/target_resource.h
Signed-off-by: Serge Belyshev <belyshev@depni.sinp.msu.ru>
Message-Id: <87ee4ql3yk.fsf_-_@depni.sinp.msu.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-02-01 08:01:38 +01:00
Richard Henderson 8f0bebebd2 linux-user/s390x: Use force_sig_fault
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-22-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11 18:40:44 +01:00
Richard Henderson 87e9bf2323 linux-user: Split out do_prctl and subroutines
Since the prctl constants are supposed to be generic, supply
any that are not provided by the host.

Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE,
PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL,
PR_GET_TAGGED_ADDR_CTRL.  Return EINVAL for guests that do
not support these options rather than pass them on to the host.

Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06 11:40:52 +01:00
Song Gao f9d0707182 linux-user: target_syscall.h remove definition TARGET_MINSIGSTKSZ
TARGET_MINSIGSTKSZ has been defined in generic/signal.h
or target_signal.h, We don't need to define it again.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-3-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06 11:40:52 +01:00
Song Gao e068b57d01 linux-user: Move target_signal.h generic definitions to generic/signal.h
No code change

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-2-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06 11:40:52 +01:00
Richard Henderson 57a0c9384c linux-user: Rename TARGET_QEMU_ESIGRETURN to QEMU_ESIGRETURN
This value is fully internal to qemu, and so is not a TARGET define.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-12-19 20:47:33 -08:00
Richard Henderson af254a2792 linux-user: Rename TARGET_ERESTARTSYS to QEMU_ERESTARTSYS
This value is fully internal to qemu, and so is not a TARGET define.
We use this as an extra marker for both host and target errno.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-12-19 20:47:33 -08:00
Richard Henderson c8e7fef102 target/s390x: Implement s390_cpu_record_sigsegv
Move the masking of the address from cpu_loop into
s390_cpu_record_sigsegv -- this is governed by hw, not linux.
This does mean we have to raise our own exception, rather
than return to the fallback.

Use maperr to choose between PGM_PROTECTION and PGM_ADDRESSING.
Use the appropriate si_code for each in cpu_loop.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson 31330e6cec linux-user/s390x: Implement setup_sigtramp
Create and record the two signal trampolines.
Use them when the guest does not use SA_RESTORER.

Cc: qemu-s390x@nongnu.org
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-22-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Peter Maydell 3b249d2661 linux-user: Split linux-user internals out of qemu.h
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).

Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
 * the definition of the TaskState struct
 * the user-access functions and macros
 * do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.

The addition of all the extra #include lines was done with
  sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13 20:35:45 +02:00
Peter Maydell 2113aed687 linux-user: Split signal-related prototypes into signal-common.h
Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13 20:35:44 +02:00
Jonathan Albrecht ccb5f2708f linux-user/s390x: signal with SIGFPE on compare-and-trap
Currently when a compare-and-trap instruction is executed, qemu will
always raise a SIGILL signal. On real hardware, a SIGFPE is raised.

Change the PGM_DATA case in cpu_loop to follow the behavior in
linux kernel /arch/s390/kernel/traps.c.
 * Only raise SIGILL if DXC == 0
 * If DXC matches a non-simulated IEEE exception, raise SIGFPE with
   correct si_code
 * Raise SIGFPE with si_code == 0 for everything else

When applied on 20210705210434.45824-2-iii@linux.ibm.com, this fixes
crashes in the java jdk such as the linked bug.

Signed-off-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Buglink: https://bugs.launchpad.net/qemu/+bug/1920913
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/319
Message-Id: <20210709160459.4962-2-jonathan.albrecht@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-08-03 15:17:38 +02:00
Ilya Leoshkevich 54ba2161d8 target/s390x: Fix SIGILL and SIGFPE psw.addr reporting
For SIGILL, SIGFPE and SIGTRAP the PSW must point after the
instruction, and at the instruction for other signals. Currently under
qemu-user for SIGFILL and SIGFPE it points at the instruction.

Fix by advancing psw.addr for these signals.

Co-developed-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/319
Message-Id: <20210705210434.45824-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-08-03 15:17:32 +02:00
Laurent Vivier 2fa4ad3f90 linux-user: update syscall.tbl to Linux v5.13
Updated running scripts/update-syscalltbl.sh

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210708215756.268805-4-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-13 13:59:59 +02:00
Philippe Mathieu-Daudé 8f968b6a24 linux-user: Extract target errno to 'target_errno_defs.h'
We want to access the target errno indepently of the rest of the
linux-user code. Move the header containing the generic errno
definitions ('errno_defs.h') to 'generic/target_errno_defs.h',
create a new 'target_errno_defs.h' in each target which itself
includes 'generic/target_errno_defs.h'.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12 21:53:35 +02:00
Richard Henderson 10b81272b3 linux-user/s390x: Save and restore psw.mask properly
At present, we're referencing env->psw.mask directly, which
fails to ensure that env->cc_op is incorporated or updated.
Use s390_cpu_{set_psw,get_psw_mask} to fix this.

Mirror the kernel's cleaning of the psw.mask in save_sigregs
and restore_sigregs.  Ignore PSW_MASK_RI for now, as qemu does
not support that.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-6-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-06-21 08:48:21 +02:00
Richard Henderson 0b16f04c1f linux-user/s390x: Handle vector regs in signal stack
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-16-richard.henderson@linaro.org>
[lv: fix indentation]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:09:36 +02:00
Richard Henderson 79d6f2baa4 linux-user/s390x: Clean up signal.c
Reorder the function bodies to correspond to the kernel source.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson 9e0fb648b2 linux-user/s390x: Add build asserts for sigset sizes
At point of usage, it's not immediately obvious that
we don't need a loop to copy these arrays.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson ac1a92ec8f linux-user/s390x: Fix frame_addr corruption in setup_frame
The original value of frame_addr is still required for
its use in the call to unlock_user_struct below.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson 6c18757dc5 linux-user/s390x: Add stub sigframe argument for last_break
In order to properly present these arguments, we need to add
code to target/s390x to record LowCore parameters for user-only.

But in the meantime, at least zero the missing last_break
argument, and fixup the comment style in the vicinity.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson 7e5355578e linux-user/s390x: Set psw.mask properly for the signal handler
Note that PSW_ADDR_{64,32} are called PSW_MASK_{EA,BA}
in the kernel source.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson 2080734880 linux-user/s390x: Clean up single-use gotos in signal.c
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson 82839490e4 linux-user/s390x: Tidy save_sigregs
The "save" routines copied from the kernel, which are currently
commented out, are unnecessary in qemu.  We can copy from env
where the kernel needs special instructions.  Fix comment style.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson bb17fc5b47 linux-user/s390x: Use tswap_sigset in setup_rt_frame
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson 4e4a08200b linux-user/s390x: Fix sigcontext sregs value
Using the host address of &frame->sregs is incorrect.
We need the guest address.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson bd45be9f5f linux-user/s390x: Fix trace in restore_regs
Directly reading sc->regs.psw.addr misses the bswap
that may be performed by __get_user.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson e6f960fcbe linux-user/s390x: Remove restore_sigregs return value
The function cannot fail.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson 915c69dc02 linux-user/s390x: Remove PSW_ADDR_AMODE
This is an unnecessary complication since we only
support 64-bit mode.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson cb1f198296 linux-user/s390x: Use uint16_t for signal retcode
Using the right type simplifies the frame setup.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson 5d79bd111f linux-user/s390x: Fix sigframe types
Noticed via gitlab clang-user job:

  TEST    signals on s390x
../linux-user/s390x/signal.c:258:9: runtime error: \
  1.84467e+19 is outside the range of representable values of \
  type 'unsigned long'

Which points to the fact that we were performing a double-to-uint64_t
conversion while storing the fp registers, instead of just copying
the data across.

Turns out there are several errors:

target_ulong is the size of the target register, whereas abi_ulong
is the target 'unsigned long' type.  Not a big deal here, since we
only support 64-bit s390x, but not correct either.

In target_sigcontext and target ucontext, we used a host pointer
instead of a target pointer, aka abi_ulong.

Fixing this allows the removal of a cast to __put_user.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson ddc3e74d9c linux-user: Pass CPUArchState to target_restore_altstack
In most cases we were already passing get_sp_from_cpustate
directly to the function.  In other cases, we were passing
a local variable which already contained the same value.
In the rest of the cases, we were passing the stack pointer
out of env directly.

Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:43:23 +02:00
Richard Henderson 56384cf3ad linux-user: Use target_restore_altstack in all sigreturn
Note that target_restore_altstack uses the host memory
pointer that we have already verified, so TARGET_EFAULT
is not a possible return value.

Note that using -EFAULT was a bug.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:43:23 +02:00
Andreas Krebbel 23fff7a17f linux-user/s390x: Use the guest pointer for the sigreturn stub
When setting up the pointer for the sigreturn stub in the return
address register (r14) we currently use the host frame address instead
of the guest frame address.

Note: This only caused problems if Qemu has been built with
--disable-pie (as it is in distros nowadays). Otherwise guest_base
defaults to 0 hiding the actual problem.

Signed-off-by: Andreas Krebbel <krebbel@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210324185128.63971-1-krebbel@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-25 20:55:07 +01:00
Chetan Pant 1c79145f12 linux user: Fix Lesser GPL version number
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.

Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122455.19417-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-15 16:41:26 +01:00
LemonBoy ce437484fc linux-user: Correct definition of stack_t
Some platforms used the wrong definition of stack_t where the flags and
size fields were swapped or where the flags field had type ulong instead
of int.

Due to the presence of padding space in the structure and the prevalence
of little-endian machines this problem went unnoticed for a long time.

The type definitions have been cross-checked with the ones defined in
the Linux kernel v5.9, plus some older versions for a few architecture
that have been removed and Xilinx's kernel fork for NiosII [1].

The bsd-user headers remain unchanged as I don't know if they are wrong
or not.

[1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h

Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-11-11 10:59:39 +01:00
Laurent Vivier 0cb113ad1a linux-user: update syscall.tbl to Linux 5.9-rc7
Updated running scripts/update-syscalltbl.sh

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200930003033.554124-4-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-10-26 11:39:23 +01:00
Filip Bozuta fcb6fcf63b linux-user: Add generic 'termbits.h' for some archs
This patch introduces a generic 'termbits.h' file for following
archs: 'aarch64', 'arm', 'i386, 'm68k', 'microblaze', 'nios2',
'openrisc', 'riscv', 's390x', 'x86_64'.

Since all of these archs have the same termios flag values and
same ioctl_tty numbers, there is no need for a separate 'termbits.h'
file for each one of them. For that reason one generic 'termbits.h'
file was added for all of them and an '#include' directive was
added for this generic file in every arch 'termbits.h' file.

Also, some of the flag values that were missing were added in this
generic file so that it matches the generic 'termibts.h' and 'ioctls.h'
files from the kernel: 'asm-generic/termbits.h' and 'asm-generic/ioctls.h'.

Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200723210233.349690-2-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27 12:29:50 +02:00
Filip Bozuta 02e5d7d78e linux-user: Add strace support for printing arguments of syscalls used to lock and unlock memory
This patch implements strace argument printing functionality for following syscalls:

    * mlock, munlock, mlockall, munlockall - lock and unlock memory

       int mlock(const void *addr, size_t len)
       int munlock(const void *addr, size_t len)
       int mlockall(int flags)
       int munlockall(void)
       man page: https://man7.org/linux/man-pages/man2/mlock.2.html

Implementation notes:

    Syscall mlockall() takes an argument that is composed of predefined values
    which represent flags that determine the type of locking operation that is
    to be performed. For that reason, a printing function "print_mlockall" was
    stated in file "strace.list". This printing function uses an already existing
    function "print_flags()" to print the "flags" argument.  These flags are stated
    inside an array "mlockall_flags" that contains values of type "struct flags".
    These values are instantiated using an existing macro "FLAG_TARGET()" that
    crates aproppriate target flag values based on those defined in files
    '/target_syscall.h'. These target flag values were changed from
    "TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set
    and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT"
    was added in this patch. This value was also added in "syscall.c" in function
    "target_to_host_mlockall_arg()". Because this flag value was added in kernel
    version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and
    in "strace.c") as to support older kernel versions.
    The other syscalls have only primitive argument types, so the
    rest of the implementation was handled by stating an appropriate
    printing format in file "strace.list". Syscall mlock2() is not implemented in
    "syscall.c" and thus it's argument printing is not implemented in this patch.

Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27 12:29:50 +02:00
Marc-André Lureau 3a30446aed meson: linux-user
The most interesting or most complicated part here is the syscall_nr.h
generators.  In order to keep the generation logic all in meson.build,
I am adding to config_target the name of the .tbl file, and making the
generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl.

For architectures where the input file is not named syscall_nr.tbl,
syscall_nr.h has to be a source file; it's just a forwarder for x86
(i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:30:38 -04:00
Laurent Vivier 28b7d5fd59 linux-user: update syscall.tbl from linux 0bf999f9c5e7
Run scripts/update-syscalltbl.sh with linux commit 0bf999f9c5e7

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-20-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-20 16:02:00 +01:00
Laurent Vivier 318f371dcf linux-user, s390x: add syscall table generation support
Copy syscall.tbl from linux/arch/s390x/kernel/syscalls v5.5
Copy syscallhdr.sh from m68k.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-12-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-20 16:02:00 +01:00
Laurent Vivier b632d67913 linux-user, s390x: remove syscall definitions for !TARGET_S390X
We don't support other 32bit architecture.
Update file to comply with coding style (TAB).

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-11-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-20 16:02:00 +01:00
Richard Henderson 07a6ecf48f linux-user: Introduce cpu_clone_regs_parent
We will need a target-specific hook for adjusting registers
in the parent during clone.  Add an empty inline function for
each target, and invoke it from the proper places.

Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06 13:43:25 +01:00
Richard Henderson 608999d17c linux-user: Rename cpu_clone_regs to cpu_clone_regs_child
We will need a target-specific hook for adjusting registers
in the parent during clone.  To avoid confusion, rename the
one we have to make it clear it affects the child.

At the same time, pass in the flags from the clone syscall.
We will need them for correct behaviour for Sparc.

Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06 13:42:34 +01:00
Markus Armbruster f91005e195 Supply missing header guards
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-5-armbru@redhat.com>
2019-06-12 13:20:21 +02:00
Markus Armbruster a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Richard Henderson dc79e92869 target/s390x: Use env_cpu, env_archcpu
Cleanup in the boilerplate that each target must define.
Replace s390_env_get_cpu with env_archcpu.  The combination
CPU(s390_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
David Hildenbrand 4f83d7d212 s390x: Use uint64_t for vector registers
CPU_DoubleU is primarily used to reinterpret between integer and floats.
We don't really need this functionality. So let's just keep it simple
and use an uint64_t.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
2019-06-07 14:53:25 +02:00
Markus Armbruster 90c84c5600 qom/cpu: Simplify how CPUClass:cpu_dump_state() prints
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it.  Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *.  monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().

The callback gets passed around a lot, which is tiresome.  The
type-punning around monitor_fprintf() is ugly.

Drop the callback, and call qemu_fprintf() instead.  Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
2019-04-18 22:18:59 +02:00