In virgl_cmd_resource_flush(), when several consoles are updated, it
needs to keep blocking until all spice gl draws are done. This fixes an
assert() in spice when using multiple monitors with virgl.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1465911849-30423-2-git-send-email-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spice deprecated this callback in 0.12.6.
It's not a problem yet, but it will cause Clang to fail in a -Werror
build due to the deprecated tag.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1467240095-12507-2-git-send-email-jsnow@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Create a helper function qxl_dirty_one_surface() to mark a single qxl
surface as dirty. Use the new qxl_get_check_slot_offset function and
lookup the memory region from the slot instead of assuming the surface
is stored in vram.
Use the new helper function in qxl_dirty_surfaces, for both primary and
off-screen surfaces. For off-screen surfaces this is no functional
change. For primary surfaces this will dirty only the memory actually
used instead of the whole surface0 region. It will also work correctly
in case the guest places the primary surface in vram instead of the
surface0 region (linux kms driver does that).
https://bugzilla.redhat.com/show_bug.cgi?id=1235732
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1466597244-5938-3-git-send-email-kraxel@redhat.com
Store MemoryRegion and offset instead of a pointer for each qxl memory
slot, so we can easily figure in which memory region an qxl object
stored.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1466597244-5938-2-git-send-email-kraxel@redhat.com
New helper function which translates a qxl physical address into
memory slot and offset. Also applies sanity checks. Factored out
from qxl_phys2virt. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1466597244-5938-1-git-send-email-kraxel@redhat.com
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXe4l4AAoJECgfDbjSjVRpIz4IALye7mKG61/POA4Gqmhalc3d
HnlNSZ2YcKAuvPg7WWkBuRacrQvVY/MbW1mLloG1lY0tdFgZG8Cy+CY6wJg1NE4c
cXd+77vHkIyrnl+Nil+QOgTFiAsMnD+mXHHsnCDw2jGn3JbgVNuCMi7V34fGkQd2
PDkZyYfwTqO3HytuG0/j2Somc9du1gjYdn+9qigfZVgP96jGDojBuJWuuU5flCB3
Kj5xrOuI01XlbdTk71tVjBJBektQurWr6r7GECDqZIpUfc+BI70FU9jPh+OlLTO/
92yi29ncjyStz4tRnf18xoQ8uBgH/tD1xigEUPRtnm1+0i/tgONBL8cAdBF9FBE=
=ABGE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 05 Jul 2016 11:18:32 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (30 commits)
vmw_pvscsi: remove unnecessary internal msi state flag
e1000e: remove unnecessary internal msi state flag
vmxnet3: remove unnecessary internal msi state flag
mptsas: remove unnecessary internal msi state flag
megasas: remove unnecessary megasas_use_msi()
pci: Convert msi_init() to Error and fix callers to check it
pci bridge dev: change msi property type
megasas: change msi/msix property type
mptsas: change msi property type
intel-hda: change msi property type
usb xhci: change msi/msix property type
change pvscsi_init_msi() type to void
tests: add APIC.cphp and DSDT.cphp blobs
tests: acpi: add CPU hotplug testcase
log: Permit -dfilter 0..0xffffffffffffffff
range: Replace internal representation of Range
range: Eliminate direct Range member access
log: Clean up misuse of Range for -dfilter
pci_register_bar: cleanup
Revert "virtio-net: unbreak self announcement and guest offloads after migration"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Internal flag msi_used is uncesessary, msi_uninit() could be called
directly, msi_enabled() is enough to check device msi state.
But for migration compatibility, keep the field in structure.
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Dmitry Fleytman <dmitry@daynix.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Internal big flag E1000E_USE_MSI is unnecessary, also is the helper
function: e1000e_init_msi(), e1000e_cleanup_msi(), so, remove them all.
cc: Dmitry Fleytman <dmitry@daynix.com>
cc: Jason Wang <jasowang@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Internal flag msi_used is unnecessary, it has the same effect as msi_enabled().
msi_uninit() could be called directly without risk.
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Dmitry Fleytman <dmitry@daynix.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
internal flag msi_in_use in unnecessary, msi_uninit() could be called
directly, and msi_enabled() is enough to check device msi state.
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
megasas overwrites user configuration when msi_init fail to flag internal msi
state, which is unsuitable. megasa_use_msi() is unnecessary, we can call
msi_uninit() directly when unrealize, even no need to call msi_enabled() first.
cc: Hannes Reinecke <hare@suse.de>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
msi_init() reports errors with error_report(), which is wrong
when it's used in realize().
Fix by converting it to Error.
Fix its callers to handle failure instead of ignoring it.
For those callers who don't handle the failure, it might happen:
when user want msi on, but he doesn't get what he want because of
msi_init fails silently.
cc: Gerd Hoffmann <kraxel@redhat.com>
cc: John Snow <jsnow@redhat.com>
cc: Dmitry Fleytman <dmitry@daynix.com>
cc: Jason Wang <jasowang@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Hannes Reinecke <hare@suse.de>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Alex Williamson <alex.williamson@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
>From bit to enum OnOffAuto.
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>From bit to enum OnOffAuto.
cc: Hannes Reinecke <hare@suse.de>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
>From uint32 to enum OnOffAuto, and give it a shorter name.
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>From uint32 to enum OnOffAuto.
cc: Gerd Hoffmann <kraxel@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>From bit to enum OnOffAuto
cc: Gerd Hoffmann <kraxel@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nobody use its return value, so change the type to void.
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Here's the current ppc, sPAPR and related drivers patch queue.
* The big addition is dynamic DMA window support (this includes some
core VFIO changes)
* There are also several fixes to the MMU emulation for bugs
introduced with the HV mode patches
* Several other bugfixes and cleanups
Changes in v2:
I messed up and forgot to make a fix in the last patch which BenH
pointed out (introduced by my rebasing). That's fixed in this
version, and I'm replacing the tag in place with the revised
version.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXe0WaAAoJEGw4ysog2bOSKacP/3C6ouCDPgHXKvXMzd81LCjb
Z3eHxl8SvG/dh8s9yn606Bwt0WfmG1JHkEF3KjHLch12QOuEAxk+npJGWSjHDQlR
vt2RknKS6tLMkYCWvzrEg6iDKyxTo4Ux2eXnEDjVDylB8cA2C5q0wqfKFYkfINwC
Q3xyVgx9ohLjZDdGZhwW85dNQ9d/mu5DpKTkINSn6yPXtT+Bvimw3J/HhTFSKgr6
w1oWDZh/AYebLKopUFKdL/IFUT6fWV3vOiMwrg7eS4slWxc8JiyAqi7jFqO7sxNg
4tZmG2WnU72sfgLDmTYpFJ1Gy3EwLeRKUslPEqQPtBctrQBa3nQRtduKFnVvxpaS
yj5ZIux6Rm7j+vI9VTVpgVm0ybWFqJwm7h4Po0LGpp3oTKRV5TjYLwP1oogU1XUW
s0bQoyId88zt17AuV/wjP3Boz4KLzGiaOzgcT8Ct9zM1nxG4vr8CdXtp/RfHSQMe
j+p4GgIdmxJtK+6r1iU1dYx62MJl/uR2Xa5atK253FJIFjX2k8qTGOu1uHXaJHhO
Wccaq+ibqte59FsvdQpRmRZGggeoHxmJJ5CUdq5MKbqStd+e6JmeEGr/UpiVXDVL
MknaavRvoBaRdjsvk22Ta5IQPKxGHmDNrknI2vtS/P+diHFTkovUJfWnYUSB/HWM
JOOXB4Ds+PBpHxU6nsU0
=g+wU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160705' into staging
ppc patch queue for 2016-07-05
Here's the current ppc, sPAPR and related drivers patch queue.
* The big addition is dynamic DMA window support (this includes some
core VFIO changes)
* There are also several fixes to the MMU emulation for bugs
introduced with the HV mode patches
* Several other bugfixes and cleanups
Changes in v2:
I messed up and forgot to make a fix in the last patch which BenH
pointed out (introduced by my rebasing). That's fixed in this
version, and I'm replacing the tag in place with the revised
version.
# gpg: Signature made Tue 05 Jul 2016 06:28:58 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160705:
ppc/hash64: Fix support for LPCR:ISL
ppc/hash64: Add proper real mode translation support
target-ppc: Return page shift from PTEG search
target-ppc: Simplify HPTE matching
target-ppc: Correct page size decoding in ppc_hash64_pteg_search()
ppc: simplify ppc_hash64_hpte_page_shift_noslb()
spapr_pci/spapr_pci_vfio: Support Dynamic DMA Windows (DDW)
vfio/spapr: Create DMA window dynamically (SPAPR IOMMU v2)
vfio: Add host side DMA window capabilities
vfio: spapr: Add DMA memory preregistering (SPAPR IOMMU v2)
spapr_iommu: Realloc guest visible TCE table when starting/stopping listening
ppc: simplify max_smt initialization in ppc_cpu_realizefn()
spapr: Ensure thread0 of CPU core is always realized first
ppc: Fix xsrdpi, xvrdpi and xvrspi rounding
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to ignore the segment page size and essentially treat
all pages as coming from a 4K segment.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[dwg: Adjusted for differences in my version of the prereq patches]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds proper support for translating real mode addresses based
on the combination of HV and LPCR bits. This handles HRMOR offset
for hypervisor real mode, and both RMA and VRMA modes for guest
real mode. PAPR mode adjusts the offsets appropriately to match the
RMA used in TCG, but we need to limit to the max supported by the
implementation (16G).
This includes some fixes by Cédric Le Goater <clg@kaod.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[dwg: Adjusted for differences in my version of the prereq patches]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppc_hash64_pteg_search() now decodes a PTEs page size encoding, which it
didn't previously do. This means we're now double decoding the page size
because we check it int he fault path after ppc64_hash64_htab_lookup()
returns.
To avoid this duplication have ppc_hash64_pteg_search() and
ppc_hash64_htab_lookup() return the page size from the PTE and use that in
the callers instead of decoding again.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
ppc_hash64_pteg_search() explicitly checks each HPTE's VALID and
SECONDARY bits, then uses the HPTE64_V_COMPARE() macro to check the B field
and AVPN. However, a small tweak to HPTE64_V_COMPARE() means we can check
all of these bits at once with a suitable ptem value. So, consolidate all
the comparisons for simplicity.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The architecture specifies that when searching a PTEG for PTEs, entries
with a page size encoding that's not valid for the current segment should
be ignored, continuing the search.
The current implementation does this with ppc_hash64_pte_size_decode()
which is a very incomplete implementation of this check. We already have
code to do a full and correct page size decode in hpte_page_shift().
This patch moves hpte_page_shift() so it can be used in
ppc_hash64_pteg_search() and adjusts the latter's parameters to include
a full SLBE instead of just a segment page shift.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The segment page shift parameter is never used. Let's remove it.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds support for Dynamic DMA Windows (DDW) option defined by
the SPAPR specification which allows to have additional DMA window(s)
The "ddw" property is enabled by default on a PHB but for compatibility
the pseries-2.6 machine and older disable it.
This also creates a single DMA window for the older machines to
maintain backward migration.
This implements DDW for PHB with emulated and VFIO devices. The host
kernel support is required. The advertised IOMMU page sizes are 4K and
64K; 16M pages are supported but not advertised by default, in order to
enable them, the user has to specify "pgsz" property for PHB and
enable huge pages for RAM.
The existing linux guests try creating one additional huge DMA window
with 64K or 16MB pages and map the entire guest RAM to. If succeeded,
the guest switches to dma_direct_ops and never calls TCE hypercalls
(H_PUT_TCE,...) again. This enables VFIO devices to use the entire RAM
and not waste time on map/unmap later. This adds a "dma64_win_addr"
property which is a bus address for the 64bit window and by default
set to 0x800.0000.0000.0000 as this is what the modern POWER8 hardware
uses and this allows having emulated and VFIO devices on the same bus.
This adds 4 RTAS handlers:
* ibm,query-pe-dma-window
* ibm,create-pe-dma-window
* ibm,remove-pe-dma-window
* ibm,reset-pe-dma-window
These are registered from type_init() callback.
These RTAS handlers are implemented in a separate file to avoid polluting
spapr_iommu.c with PCI.
This changes sPAPRPHBState::dma_liobn to an array to allow 2 LIOBNs
and updates all references to dma_liobn. However this does not add
64bit LIOBN to the migration stream as in fact even 32bit LIOBN is
rather pointless there (as it is a PHB property and the management
software can/should pass LIOBNs via CLI) but we keep it for the backward
migration support.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
New VFIO_SPAPR_TCE_v2_IOMMU type supports dynamic DMA window management.
This adds ability to VFIO common code to dynamically allocate/remove
DMA windows in the host kernel when new VFIO container is added/removed.
This adds a helper to vfio_listener_region_add which makes
VFIO_IOMMU_SPAPR_TCE_CREATE ioctl and adds just created IOMMU into
the host IOMMU list; the opposite action is taken in
vfio_listener_region_del.
When creating a new window, this uses heuristic to decide on the TCE table
levels number.
This should cause no guest visible change in behavior.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Added some casts to prevent printf() warnings on certain targets
where the kernel headers' __u64 doesn't match uint64_t or PRIx64]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are going to be multiple IOMMUs per a container. This moves
the single host IOMMU parameter set to a list of VFIOHostDMAWindow.
This should cause no behavioral change and will be used later by
the SPAPR TCE IOMMU v2 which will also add a vfio_host_win_del() helper.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This makes use of the new "memory registering" feature. The idea is
to provide the userspace ability to notify the host kernel about pages
which are going to be used for DMA. Having this information, the host
kernel can pin them all once per user process, do locked pages
accounting (once) and not spent time on doing that in real time with
possible failures which cannot be handled nicely in some cases.
This adds a prereg memory listener which listens on address_space_memory
and notifies a VFIO container about memory which needs to be
pinned/unpinned. VFIO MMIO regions (i.e. "skip dump" regions) are skipped.
The feature is only enabled for SPAPR IOMMU v2. The host kernel changes
are required. Since v2 does not need/support VFIO_IOMMU_ENABLE, this does
not call it when v2 is detected and enabled.
This enforces guest RAM blocks to be host page size aligned; however
this is not new as KVM already requires memory slots to be host page
size aligned.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Fix compile error on 32-bit host]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR TCE tables manage 2 copies when VFIO is using an IOMMU -
a guest view of the table and a hardware TCE table. If there is no VFIO
presense in the address space, then just the guest view is used, if
this is the case, it is allocated in the KVM. However since there is no
support yet for VFIO in KVM TCE hypercalls, when we start using VFIO,
we need to move the guest view from KVM to the userspace; and we need
to do this for every IOMMU on a bus with VFIO devices.
This implements the callbacks for the sPAPR IOMMU - notify_started()
reallocated the guest view to the user space, notify_stopped() does
the opposite.
This removes explicit spapr_tce_set_need_vfio() call from PCI hotplug
path as the new callbacks do this better - they notify IOMMU at
the exact moment when the configuration is changed, and this also
includes the case of PCI hot unplug.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
kvmppc_smt_threads() returns 1 if KVM is not enabled.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
During CPU core realization, we create all the thread objects and parent
them to the core object in a loop. However, the realization of thread
objects is done separately by walking the threads of a core using
object_child_foreach(). With this, there is no guarantee on the order
in which the child thread objects get realized. Since CPU device tree
properties are currently derived from the CPU thread object, we assume
thread0 of the core to be the representative thread of the core when
creating device tree properties for the core. If thread0 is not the
first thread that gets realized, then we would end up having an
incorrect dt_id for the core and this causes hotplug failures from
the guest.
Fix this by realizing each thread object by walking the core's thread
object list thereby ensuring that thread0 and other threads are always
realized in the correct order.
Future TODO: CPU DT nodes are per-core properties and we should
ideally base the creation of CPU DT nodes on core objects rather than
the thread objects.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xsrdpi, xvrdpi and xvrspi use the round ties away method, not round
nearest even.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Modern gnutls can use a global config file to control the
crypto priority settings for TLS connections. For example
the priority string "@SYSTEM" instructs gnutls to find the
priority setting named "SYSTEM" in the global config file.
Latest gnutls GIT codebase gained the ability to reference
multiple priority strings in the config file, with the first
one that is found to existing winning. This means it is now
possible to configure QEMU out of the box with a default
priority of "@QEMU,SYSTEM", which says to look for the
settings "QEMU" first, and if not found, use the "SYSTEM"
settings.
To make use of this facility, we introduce the ability to
set the QEMU default priority at build time via a new
configure argument. It is anticipated that distro vendors
will set this when building QEMU to a suitable value for
use with distro crypto policy setup. eg current Fedora
would run
./configure --tls-priority=@SYSTEM
while future Fedora would run
./configure --tls-priority=@QEMU,SYSTEM
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The gnutls default priority is either "NORMAL" (most historical
versions of gnutls) which is a built-in label in gnutls code,
or "@SYSTEM" (latest gnutls on Fedora at least) which refers
to an admin customizable entry in a gnutls config file.
Regardless of which default is used by a distro, they are both
global defaults applying to all applications using gnutls. If
a single application on the system needs to use a weaker set
of crypto priorities, this potentially forces the weakness onto
all applications. Or conversely if a single application wants a
strong default than all others, it can't do this via the global
config file.
This adds an extra parameter to the tls credential object which
allows the mgmt app / user to explicitly provide a priority
string to QEMU when configuring TLS.
For example, to use the "NORMAL" priority, but disable SSL 3.0
one can now configure QEMU thus:
$QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
priority="NORMAL:-VERS-SSL3.0" \
..other args...
If creating tls-creds-anon, whatever priority the user specifies
will always have "+ANON-DH" appended to it, since that's mandatory
to make the anonymous credentials work.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wire up the nettle and gcrypt hash backends so that they can
support the sha224, sha384, sha512 and ripemd160 hash algorithms.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Test with:
-smp 2,cores=3,sockets=2,maxcpus=6
to capture sparse APIC ID values that default
AMD CPU has in above configuration.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Works fine since the previous commit fixed the underlying range data
type. Of course it filters out nothing, but so does
0..1,2..0xffffffffffffffff, and we don't bother rejecting that either.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Range represents a range as follows. Member @start is the inclusive
lower bound, member @end is the exclusive upper bound. Zero @end is
special: if @start is also zero, the range is empty, else @end is to
be interpreted as 2^64. No other empty ranges may occur.
The range [0,2^64-1] cannot be represented. If you try to create it
with range_set_bounds1(), you get the empty range instead. If you try
to create it with range_set_bounds() or range_extend(), assertions
fail. Before range_set_bounds() existed, the open-coded creation
usually got you the empty range instead. Open deathtrap.
Moreover, the code dealing with the janus-faced @end is too clever by
half.
Dumb this down to a more pedestrian representation: members @lob and
@upb are inclusive lower and upper bounds. The empty range is encoded
as @lob = 1, @upb = 0.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Users of struct Range mess liberally with its members, which makes
refactoring hard. Create a set of methods, and convert all users to
call them instead of accessing members. The methods have carefully
worded contracts, and use assertions to check them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Range encodes an integer interval [a,b] as { begin = a, end = b + 1 },
where a \in [0,2^64-1] and b \in [1,2^64]. Thus, zero end is to be
interpreted as 2^64.
The implementation of -dfilter (commit 3514552) uses Range
differently: it encodes [a,b] as { begin = a, end = b }. The code
works, but it contradicts the specification of Range in range.h.
Switch to the specified representation. Since it can't represent
[0,UINT64_MAX], we have to reject that now. Add a test for it.
While we're rejecting anyway: observe that we reject -dfilter LOB..UPB
where LOB > UPB when UPB is zero, but happily create an empty Range
when it isn't. Reject it then, too, and add a test for it.
While there, add a positive test for the problematic upper bound
UINT64_MAX.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
place relevant code tegother, make the code easier to read
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
* fix semihosting SYS_HEAPINFO call for A64 guests
* fix crash if guest tries to write to ROM on imx boards
* armv7m_nvic: fix crash for debugger reads from some registers
* virt: mark PCIe host controller as dma-coherent in the DT
* add data-driven register API
* Xilinx Zynq: add devcfg device model
* m25p80: fix various bugs
* ast2400: add SMC controllers and SPI flash slaves
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Du+u
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160704' into staging
target-arm queue:
* fix semihosting SYS_HEAPINFO call for A64 guests
* fix crash if guest tries to write to ROM on imx boards
* armv7m_nvic: fix crash for debugger reads from some registers
* virt: mark PCIe host controller as dma-coherent in the DT
* add data-driven register API
* Xilinx Zynq: add devcfg device model
* m25p80: fix various bugs
* ast2400: add SMC controllers and SPI flash slaves
# gpg: Signature made Mon 04 Jul 2016 13:17:34 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20160704: (23 commits)
ast2400: create SPI flash slaves
ast2400: add SPI flash slaves
ast2400: add SMC controllers (FMC and SPI)
m25p80: qdev-ify drive property
m25p80: change cur_addr to 32 bit integer
m25p80: avoid out of bounds accesses
m25p80: do not put iovec on the stack
ssi: change ssi_slave_init to be a realize ops
xilinx_zynq: Connect devcfg to the Zynq machine model
dma: Add Xilinx Zynq devcfg device model
register: Add block initialise helper
register: QOMify
register: Define REG and FIELD macros
register: Add Memory API glue
register: Add Register API
bitops: Add MAKE_64BIT_MASK macro
hw/arm/virt: mark the PCIe host controller as DMA coherent in the DT
armv7m_nvic: Use qemu_get_cpu(0) instead of current_cpu
memory: Assert that memory_region_init_rom_device() ops aren't NULL
imx: Use memory_region_init_rom() for ROMs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
