Add zoned device option to host_device BlockDriver. It will be presented only
for zoned host block devices. By adding zone management operations to the
host_block_device BlockDriver, users can use the new block layer APIs
including Report Zone and four zone management operations
(open, close, finish, reset, reset_all).
Qemu-io uses the new APIs to perform zoned storage commands of the device:
zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
zone_finish(zf).
For example, to test zone_report, use following command:
$ ./build/qemu-io --image-opts -n driver=host_device, filename=/dev/nullb0
-c "zrp offset nr_zones"
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-4-faithilikerun@gmail.com
Message-id: 20230324090605.28361-4-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and remove spurious ret = -errno in
raw_co_zone_mgmt().
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-80-richard.henderson@linaro.org>
- Graph locking, part 3 (more block drivers)
- Compile out assert_bdrv_graph_readable() by default
- Add configure options for vmdk, vhdx and vpc
- Fix use after free in blockdev_mark_auto_del()
- migration: Attempt disk reactivation in more failure scenarios
- Coroutine correctness fixes
-----BEGIN PGP SIGNATURE-----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=hw9E
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Graph locking, part 3 (more block drivers)
- Compile out assert_bdrv_graph_readable() by default
- Add configure options for vmdk, vhdx and vpc
- Fix use after free in blockdev_mark_auto_del()
- migration: Attempt disk reactivation in more failure scenarios
- Coroutine correctness fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRbi6ERHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9Y66A//ZRk/0M6EZUJPAKG6m/XLTDNrOCNBZ1Tu
# kBGvxXsVQZMt4gGpBad4l2INN6IQKTIdIf+lK71EpxMPmFG6xK32btn38yywCAfQ
# lr1p5nR0Y/zSlT+XzP4yKy/CtQl6U0rkysmjCIk35bZc7uLy6eo4oFR4vmhRRt2M
# UGltB50/Nicx12YFufVjodbhv+apxTGwS2XHatmwqtjKeYReSz8mJHslEy6DvC8m
# ziNThD6YBy7hMktAhNaqUqtZD0OSWz66VMObco/4i2++sOAMZIspXQkjv3AjH74e
# lmgMhNc/xgJKPwFBPsj6F7dOKxwhdKD9jzZlx3yaBtAU18hpWX54QWuA3/CFlySc
# 5QbbqIstFTC8lqoRWThQrcHHRKbDBJCP4ImRXUIKhuPaxEzXA9zb3+f3QPTIjLSA
# KO7nxuSmO+tC7hQ1K9kAjRZHWlxxAk4clk+7UrK4UrWgGxfCUKgFg4Tyx7RrpwA6
# j4L5vwAY60LW74tikWe9xJx2QbdRoWBTTZhUyirbO7rLX1e8mS1nUWmtIsFSQxAq
# Z7nX7ygN0WEF+8qIsk3jTGaEeJoCM7+7B+X2RpSy0sftFjFYmybIiUgLMO7e+ozK
# rvUPnwlHAbGCVIJOKrUDj3cGt6k3/xnrTajUc7pCB3KKqG4pe+IlZuHyKIUMActb
# dBLaBnj0M2o=
# =hw9E
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 May 2023 01:18:41 PM BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (28 commits)
block: compile out assert_bdrv_graph_readable() by default
block: Mark bdrv_refresh_limits() and callers GRAPH_RDLOCK
block: Mark bdrv_recurse_can_replace() and callers GRAPH_RDLOCK
block: Mark bdrv_query_block_graph_info() and callers GRAPH_RDLOCK
block: Mark bdrv_query_bds_stats() and callers GRAPH_RDLOCK
block: Mark BlockDriver callbacks for amend job GRAPH_RDLOCK
block: Mark bdrv_co_debug_event() GRAPH_RDLOCK
block: Mark bdrv_co_get_info() and callers GRAPH_RDLOCK
block: Mark bdrv_co_get_allocated_file_size() and callers GRAPH_RDLOCK
mirror: Require GRAPH_RDLOCK for accessing a node's parent list
vhdx: Require GRAPH_RDLOCK for accessing a node's parent list
nbd: Mark nbd_co_do_establish_connection() and callers GRAPH_RDLOCK
nbd: Remove nbd_co_flush() wrapper function
block: .bdrv_open is non-coroutine and unlocked
graph-lock: Fix GRAPH_RDLOCK_GUARD*() to be reader lock
graph-lock: Add GRAPH_UNLOCKED(_PTR)
test-bdrv-drain: Don't modify the graph in coroutines
iotests: Test resizing image attached to an iothread
block: Don't call no_coroutine_fns in qmp_block_resize()
block: bdrv/blk_co_unref() for calls in coroutine context
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
reader_count() is a performance bottleneck because the global
aio_context_list_lock mutex causes thread contention. Put this debugging
assertion behind a new ./configure --enable-debug-graph-lock option and
disable it by default.
The --enable-debug-graph-lock option is also enabled by the more general
--enable-debug option.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230501173443.153062-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Let's add --enable / --disable configure options for these formats,
so that those who don't need them may not build them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230421092758.814122-1-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----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=j6cJ
-----END PGP SIGNATURE-----
Merge tag 'pull-qapi-2023-05-09-v2' of https://repo.or.cz/qemu/armbru into staging
QAPI patches patches for 2023-05-09
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmRbUEYSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTmzEP/3pDpVxpP7xXLevl2vFqkFyHEjc0L3N4
# x//ljgQojAdM6WU3e0qqOfp/NE2ktUg5D3z+QNiVP1/xXv/dtMGATdG+X9AZs0US
# XnhdicYdBng8bGuhlNuNY8QJ/I4ALwUR44LVOYibVohv2RVYWBapGiHowpyTyABq
# sFSHrj/cgvTMUn53yp7veZTo6rWG6RU/D5uUTOMsvKeAoHoOXMyBxV01SCt84t/J
# pcelINcriP6cQVzgfm1B39UNa0IxinGxEx/IIaxz5Ju66G05HTs4CsBFAF6/0QI/
# 3YerGWPt9fF6+qYNn21Gg9CL1fHHppNqTXkcuTeGn/Ohg53bosktti5Ysn73vtpR
# GWsJr6M4KQ1SwEbZIiFZCS3A4VTbRcr7WkXets39pcpxGDlNisi+zfV95kNo09xR
# hxi8SuWgb2OfQpVs/71eunp+PM1ZQsODurcy4x0/rlYJfhk53kQSMRtlfy5Cn6uY
# +weWUgygBSWG/w0qanWWK5TF1DNlRKzbix6cmMuGGKcpyF7EMWE1kqmjmmu7CQvM
# a3aPTqGtUt0LeqBQIhmeq/jEwd3vxQa1R85gd0/0sWxEMHkPXVfVoaryiaWAykye
# 7r+c8o/41c44zs8YxdZrz72su9fqKC/TeVf5soU46ZucmH8D6f7QHy+s1ec2PEjY
# l6cRIXTXHeQe
# =j6cJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 May 2023 09:05:26 AM BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [undefined]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-qapi-2023-05-09-v2' of https://repo.or.cz/qemu/armbru:
qapi: Reformat doc comments to conform to current conventions
qga/qapi-schema: Reformat doc comments to conform to current conventions
docs/devel/qapi-code-gen: Update doc comment conventions
qapi: Section parameter @indent is no longer used, drop
qapi: Relax doc string @name: description indentation rules
qapi: Rewrite parsing of doc comment section symbols and tags
qapi: Fix argument description indentation stripping
tests/qapi-schema/doc-good: Improve argument description tests
tests/qapi-schema/doc-good: Improve a comment
qapi/dump: Indent bulleted lists consistently
qapi: Tidy up a slightly awkward TODO comment
sphinx/qapidoc: Do not emit TODO sections into user manuals
Revert "qapi: BlockExportRemoveMode: move comments to TODO"
meson: Fix to make QAPI generator output depend on main.py
qapi: Fix crash on stray double quote character
docs/devel/qapi-code-gen: Turn FIXME admonitions into comments
docs/devel/qapi-code-gen: Clean up use of quotes a bit
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
@qapi_gen_depends is missing scripts/qapi/main.py. Fix that, and drop
a duplicate scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-5-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
meson.build files choose whether to build modules based on foo.found()
expressions. If a feature is enabled (e.g. --enable-gtk), these expressions
are true even if the code is not used by any emulator, and this results
in an unexpected difference between modular and non-modular builds.
For non-modular builds, the files are not included in any binary, and
therefore the source files are never processed. For modular builds,
however, all .so files are unconditionally built by default, and therefore
a normal "make" tries to build them. However, the corresponding trace-*.h
files are absent due to this conditional:
if have_system
trace_events_subdirs += [
...
'ui',
...
]
endif
which was added to avoid wasting time running tracetool on unused trace-events
files. This causes a compilation failure; fix it by skipping module builds
entirely if (depending on the module directory) have_block or have_system
are false.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit adds a new audiodev backend to allow QEMU to use Pipewire as
both an audio sink and source. This backend is available on most systems
Add Pipewire entry points for QEMU Pipewire audio backend
Add wrappers for QEMU Pipewire audio backend in qpw_pcm_ops()
qpw_write function returns the current state of the stream to pwaudio
and Writes some data to the server for playback streams using pipewire
spa_ringbuffer implementation.
qpw_read function returns the current state of the stream to pwaudio and
reads some data from the server for capture streams using pipewire
spa_ringbuffer implementation. These functions qpw_write and qpw_read
are called during playback and capture.
Added some functions that convert pw audio formats to QEMU audio format
and vice versa which would be needed in the pipewire audio sink and
source functions qpw_init_in() & qpw_init_out().
These methods that implement playback and recording will create streams
for playback and capture that will start processing and will result in
the on_process callbacks to be called.
Built a connection to the Pipewire sound system server in the
qpw_audio_init() method.
Signed-off-by: Dorinda Bassey <dbassey@redhat.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230417105654.32328-1-dbassey@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Use the attribute, which is supported by clang, instead of
the #pragma, which is not supported and, for some reason,
also not detected by the meson probe, so we fail by -Werror.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230501210555.289806-1-richard.henderson@linaro.org>
Allow to build & use the DBus display without 3d/GPU acceleration support.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This file, and a couple of uses, got left behind when the
tcg stuff was removed from tracetool.
Fixes: 126d4123c5 ("tracing: excise the tcg related from tracetool")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This wires up the basic infrastructure but the actual interrupts aren't
there yet, so don't advertise it to the guest.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The XEN_EMU option will cover core Xen support in target/, which exists
only for x86 with KVM today but could theoretically also be implemented
on Arm/Aarch64 and with TCG or other accelerators (if anyone wants to
run the gauntlet of struct layout compatibility, errno mapping, and the
rest of that fui).
It will also cover the support for architecture-independent grant table
and event channel support which will be added in hw/i386/kvm/ (on the
basis that the non-KVM support is very theoretical and making it not use
KVM directly seems like gratuitous overengineering at this point).
The XEN_BUS option is for the xenfv platform support, which will now be
used both by XEN_EMU and by real Xen.
The XEN option remains dependent on the Xen runtime libraries, and covers
support for real Xen. Some code which currently resides under CONFIG_XEN
will be moving to CONFIG_XEN_BUS over time as the direct dependencies on
Xen runtime libraries are eliminated. The Xen PCI platform device will
also reside under CONFIG_XEN_BUS.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Windows implementation of setjmp/longjmp is done in
C:/WINDOWS/system32/ucrtbase.dll. Alas, on arm64, it seems to *always*
perform stack unwinding, which crashes from generated code.
By using alternative implementation built in mingw, we avoid doing stack
unwinding and this fixes crash when calling longjmp.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221153006.20300-3-pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now the fuzzers will reboot the guest between inputs.
-----BEGIN PGP SIGNATURE-----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=F6qI
-----END PGP SIGNATURE-----
Merge tag 'pr-2023-02-16' of https://gitlab.com/a1xndr/qemu into staging
Replace fork-based fuzzing with reboots.
Now the fuzzers will reboot the guest between inputs.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEE+tTiv4cTddY0BRfETmYd3lg6lk4FAmPu/LoACgkQTmYd3lg6
# lk6RHg/7BRGI5ZPXb1MmTNCC+SroQ6TT++lO4b0hbkN2HO6U+WVvfuA6+0wg+8qC
# 4bp+G1Tabpcq1MTYUuim6DBtWswgpqr0AbWNwn1eF7hya+3W9woH2POVYY2wwc7m
# S3EdwXCCKo9gGXlaNrotnbwIk+o8B4BzXOXLIlRtg26wGYhT5fkJA/BQcHKDXz37
# ctyWxlyjIM8pNCgfybMvjC7MYtp8DufPsv/rrKx9t0TM7f1jPVgXLek7t0+ZwjeY
# qz2Om2jiij1INgK9hTieWs4eHwpwre6vH2a+JKRkZ3sS7WYcj1auNKVJb3GvDqmc
# wy+Nz5Lz4+aPP19pkCYjfz5w3CqEEsSlSDn5UVRbfl2fbENSceoNwo9huMXsF1pB
# oO6NK2NxbOygmNpYxp+JEt45KFIXzUcIFQwbn8aCDODIl+0H2yu7/ll6XgELf1Pa
# P83THOaVxIxfcI9VOdt/FwDq1ZzmV5nk/BkIGJeIWNYMbU4Gze6YoaL3U8AHDxKH
# f6f3qDzcVJjqD0wKhvYcQ3kSPq+vHc/ioh6mYwos6VUEVYz/SLOY876MaSB/K4PE
# ofBV7y6HvJ6AMwg1TBg4YtOP08gWK+4sYH+I09oU40U3UcwEpkbkQTF72lPQHxFs
# 8UVRJrgWv/xzrwzXTX5ruQ633F8zuhqQTeERqksj1pPHJ3NdHps=
# =F6qI
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Feb 2023 04:04:10 GMT
# gpg: using RSA key FAD4E2BF871375D6340517C44E661DDE583A964E
# gpg: Good signature from "Alexander Bulekov <alxndr@bu.edu>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAD4 E2BF 8713 75D6 3405 17C4 4E66 1DDE 583A 964E
* tag 'pr-2023-02-16' of https://gitlab.com/a1xndr/qemu:
docs/fuzz: remove mentions of fork-based fuzzing
fuzz: remove fork-fuzzing scaffolding
fuzz/i440fx: remove fork-based fuzzer
fuzz/virtio-blk: remove fork-based fuzzer
fuzz/virtio-net: remove fork-based fuzzer
fuzz/virtio-scsi: remove fork-based fuzzer
fuzz/generic-fuzz: add a limit on DMA bytes written
fuzz/generic-fuzz: use reboots instead of forks to reset state
fuzz: add fuzz_reset API
hw/sparse-mem: clear memory on reset
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make use of pthread_set_name_np() to be able to set the threads name
on OpenBSD.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <Y57NrCmPTVSXLWC4@humpty.home.comstyle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fork-fuzzing provides a few pros, but our implementation prevents us
from using fuzzers other than libFuzzer, and may be causing issues such
as coverage-failure builds on OSS-Fuzz. It is not a great long-term
solution as it depends on internal implementation details of libFuzzer
(which is no longer in active development). Remove it in favor of other
methods of resetting state between inputs.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Remove all the virtiofsd build and docs infrastructure.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
As gprof relies on instrumentation you rarely get useful data compared
to a real optimised build. Lets deprecate the build option and
simplify the CI configuration as a result.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1338
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230131094224.861621-1-alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Static QEMU build fails on Debian Bullseye:
/usr/bin/ld: /usr/lib/x86_64-linux-gnu/libdw.a(debuginfod-client.o): in function `__libdwfl_debuginfod_init':
(.text.startup+0x17): undefined reference to `dlopen'
The reason is that pkg-config does not suggest -ldl for libdw, and
adding --extra-ldflags="-ldl" resolves the issue. However, static
linking with libdw is an unclear topic:
* Linux perf does it.
* Debian's libdw-dev description says:
Only link to the static version for special cases and when you
don't need anything from the ebl backends.
* As the error message above indicates, -ldl is also needed for
debuginfod support.
The functionality provided by libdw is needed for analyzing performance
of JITed code, which is mostly useful to developers and researchers.
Therefore, in order to avoid unpleasant surprises for people who don't
need this, simply disable libdw for static builds by default. It can
still be enabled explicitly if needed.
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230210005208.438142-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the missing meson infrastructure bits for the new libdw
dependency. Model them after the existing capstone knobs.
Fixes: 7c10cb38cc ("accel/tcg: Add debuginfo support")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230210005208.438142-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This commit is the same with [PATCH v6 1/2], and provides avx512 support for xbzrle_encode_buffer
function to accelerate xbzrle encoding speed. Runtime check of avx512
support and benchmark for this feature are added. Compared with C
version of xbzrle_encode_buffer function, avx512 version can achieve
50%-70% performance improvement on benchmarking. In addition, if dirty
data is randomly located in 4K page, the avx512 version can achieve
almost 140% performance gain.
Signed-off-by: ling xu <ling1.xu@intel.com>
Co-authored-by: Zhou Zhao <zhou.zhao@intel.com>
Co-authored-by: Jun Jin <jun.i.jin@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This moves these commands from MAINTAINERS section "QMP" to new
section "Stats". Status is Orphan. Volunteers welcome!
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-23-armbru@redhat.com>
This reverts commit 3cd3df2a95.
glibc has fixed (in 2.36.9000-40-g774058d729) the problem
that caused a clash when both sys/mount.h annd linux/mount.h
are included, and backported this to the 2.36 stable release
too:
https://sourceware.org/glibc/wiki/Release/2.36#Usage_of_.3Clinux.2Fmount.h.3E_and_.3Csys.2Fmount.h.3E
It is saner for QEMU to remove the workaround it applied for
glibc 2.36 and expect distros to ship the 2.36 maint release
with the fix. This avoids needing to add a further workaround
to QEMU to deal with the fact that linux/brtfs.h now also pulls
in linux/mount.h via linux/fs.h since Linux 6.1
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230110174901.2580297-3-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- update playbooks for custom runners
- add section timing support to gitlab
- upgrade fedora images to 37
- purge perl from the build system and deps
- disable unstable tests in CI
- improve intro, emulation and semihosting docs
- semihosting bug fix and O_BINARY default
- add memory-sve test
- fix some races in qht
- improve plugin handling of memory helpers
- optimise plugin hooks
- fix some plugin deadlocks
- reduce win64-cross build time by dropping some targets
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmPb3fgACgkQ+9DbCVqe
KkQbXAf9Eoc+PdNvafbqzH/blPjvd9ve8pJ+GcPDukNXwxP8OF/jFEJUQ1E7l9O7
y0qV4akKCdIqVice4R5bK2CAq44Y3aut8SDf56C8E3Riha2zA2RbQWOv/zCvA3OP
LFF+OaXZyg4JTR48HUKzh9ei2bd1+ccBSUe+xlRi59XaV5K8+5bmcZj10QKUR0lD
0HC5auEWWpayvd5D7Da15C7+oVY3LMCFxSdpHwbuIPPan/TRo5yqMI6ChYDKB8QD
gdwMCL8znj2ADCTBftyBDYDAtjKVyLQidf7KdQHiSF+nmXYopS6SbsPCOMtJqCMH
tXcKAIxs/MEntPrWTKTdtdnzotJVKw==
=AtfN
-----END PGP SIGNATURE-----
Merge tag 'pull-jan-omnibus-020223-1' of https://gitlab.com/stsquad/qemu into staging
Testing, docs, semihosting and plugin updates
- update playbooks for custom runners
- add section timing support to gitlab
- upgrade fedora images to 37
- purge perl from the build system and deps
- disable unstable tests in CI
- improve intro, emulation and semihosting docs
- semihosting bug fix and O_BINARY default
- add memory-sve test
- fix some races in qht
- improve plugin handling of memory helpers
- optimise plugin hooks
- fix some plugin deadlocks
- reduce win64-cross build time by dropping some targets
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmPb3fgACgkQ+9DbCVqe
# KkQbXAf9Eoc+PdNvafbqzH/blPjvd9ve8pJ+GcPDukNXwxP8OF/jFEJUQ1E7l9O7
# y0qV4akKCdIqVice4R5bK2CAq44Y3aut8SDf56C8E3Riha2zA2RbQWOv/zCvA3OP
# LFF+OaXZyg4JTR48HUKzh9ei2bd1+ccBSUe+xlRi59XaV5K8+5bmcZj10QKUR0lD
# 0HC5auEWWpayvd5D7Da15C7+oVY3LMCFxSdpHwbuIPPan/TRo5yqMI6ChYDKB8QD
# gdwMCL8znj2ADCTBftyBDYDAtjKVyLQidf7KdQHiSF+nmXYopS6SbsPCOMtJqCMH
# tXcKAIxs/MEntPrWTKTdtdnzotJVKw==
# =AtfN
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Feb 2023 15:59:52 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-jan-omnibus-020223-1' of https://gitlab.com/stsquad/qemu: (36 commits)
gitlab: cut even more from cross-win64-system build
plugins: Iterate on cb_lists in qemu_plugin_user_exit
cpu-exec: assert that plugin_mem_cbs is NULL after execution
tcg: exclude non-memory effecting helpers from instrumentation
translator: always pair plugin_gen_insn_{start, end} calls
plugins: fix optimization in plugin_gen_disable_mem_helpers
plugins: make qemu_plugin_user_exit's locking order consistent with fork_start's
util/qht: use striped locks under TSAN
thread: de-const qemu_spin_destroy
util/qht: add missing atomic_set(hashes[i])
cpu: free cpu->tb_jmp_cache with RCU
tests/tcg: add memory-sve test for aarch64
semihosting: add O_BINARY flag in host_open for NT compatibility
semihosting: Write back semihosting data before completion callback
docs: add an introduction to the system docs
semihosting: add semihosting section to the docs
docs: add a new section to outline emulation support
docs: add hotlinks to about preface text
MAINTAINERS: Fix the entry for tests/tcg/nios2
gitlab: wrap up test results for custom runners
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On msys2, the shader-to-C script produces bad C:
./ui/shader/texture-blit-vert.h:2:5: error: missing terminating " character [-Werror]
Fix it by changing the line ending from crlf to lf, and convert the
script to Python (qemu build seems perl-free after that).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230110132700.833690-2-marcandre.lureau@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-6-alex.bennee@linaro.org>
Since commit efc6c070ac ("configure: Add a test for the minimum
compiler version") the minimum compiler version required for GCC
is 4.8, which supports __builtin_bswap().
Remove the NetBSD specific ifdef'ry.
This reverts commit 1360677cfe
("makes NetBSD use the native bswap functions").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230111163147.71761-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit efc6c070ac ("configure: Add a test for the minimum
compiler version") the minimum compiler version required for GCC
is 4.8, which supports __builtin_bswap().
Drop the <byteswap.h> dependency.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230111163147.71761-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Version 0.14.0 is now old enough to have made it into the major
distributions:
Debian 11: 0.14.3
RHEL-8: 0.14.3
FreeBSD (ports): 0.15.0
Fedora 35: 0.15.0
Ubuntu 20.04: 0.14.2
OpenSUSE Leap 15.3: 0.14.3
Requiring it lets us drop a number of version checks. The next commit
will clean up some more.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230109190321.1056914-6-armbru@redhat.com>
Version 0.14.0 is now old enough to have made it into the major
distributions:
Debian 11: 0.14.3
RHEL-8: 0.14.2
FreeBSD (ports): 0.14.4
Fedora 35: 0.14.0
Ubuntu 20.04: 0.14.0
OpenSUSE Leap 15.3: 0.14.3
Requiring it lets us drop two version checks in ui/vdagent.c. It also
enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230109190321.1056914-4-armbru@redhat.com>
Use the attribute, which is supported by clang, instead of
the #pragma, which is not supported and, for some reason,
also not detected by the meson probe, so we fail by -Werror.
Include only <immintrin.h> as that is the outermost "official"
header for these intrinsics -- emmintrin.h and smmintrin -- are
older SSE2 and SSE4 specific headers, while the immintrin.h
includes all of the Intel intrinsics.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add libdw-based functions for loading and querying debuginfo. Load
debuginfo from the system and the linux-user loaders.
This is useful for the upcoming perf support, which can then put
human-readable guest symbols instead of raw guest PCs into perfmap and
jitdump files.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the nanomips disassembler is not C++ code anymore, it need not
depend on link_language == cpp. Always include it and remove the
CONFIG_NANOMIPS_DIS symbol.
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230110084942.299460-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmO3Ym0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNYmwf+LHEw+4T0fk1+2NfgIzH3+8s1EqDm
Ai56EjxO/p5NUptflXAnhn4P3LawswmmNE0ZIFFFBgwG5E9L+Jj/u5efuLu4uYPg
bboEBDn8nxSNN2l08u9TyS6kSWSxbwwrs7i2+V+4uQIlVIcCHu+A0vpXns4vWwY0
zZGF8CgJKDQdPIxdXrH8+6/xtadQ8uDkYsAWDiY/nhozCsCUTAZGTXWEQbHJLARI
Z4X+Cmz/NFB9G4ka6K/y0HbQw99KA8G/EMPUSglN0ya10yjpyzrmeI7IlIves+5U
8lhCZXyBhaV9GXlIK1vIgEXlHf83C19a+v0DpW0bpxK631n2VR5y3CArBg==
=2Koq
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Atomic memslot updates for KVM (Emanuele, David)
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)
# gpg: Signature made Thu 05 Jan 2023 23:51:09 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
i386: SGX: remove deprecated member of SGXInfo
target/i386: Add SGX aex-notify and EDECCSSA support
util: remove support -chardev tty and -chardev parport
util: remove support for hex numbers with a scaling suffix
KVM: remove support for kernel-irqchip=off
docs: do not talk about past removal as happening in the future
meson: accept relative symlinks in "meson introspect --installed" data
meson: cleanup compiler detection
meson: support meson 0.64 -Doptimization=plain
configure: test all warnings
tests/qapi-schema: remove Meson workaround
meson: cleanup dummy-cpus.c rules
meson: tweak hardening options for Windows
configure: remove backwards-compatibility and obsolete options
configure: preserve qemu-ga variables
configure: cleanup $cpu tests
configure: remove dead function
configure: remove useless write_c_skeleton
ide: Add "ide-cf" driver, a CompactFlash card
ide: Add 8-bit data mode
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add tcg backend paired register allocation.
Cleanup tcg backend function call abi.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmO3kZEdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/JpwgAj9kwpiWehGWrpQp9
rbEL+Fsx+SDhnoLVpF6nmSB1nkDqdgkdnhyRaLX9wM69bnocsGppZ5sd57J/cH3m
WiODVVbWP80WHonx5EN4htQv99TZWqVmXVl11DwOfsRUmINl4GG4kvHOOABd8hdc
39eRgGBBMyMShc6MUJiToyjEAcZPcGAiHkSW9YDGbvzhlloNWh46eLP1bdW3UJWK
UiEwPpXqg+L0V8nuuQnSFoPr5FIJmmoTeiGCRHXtvgOT7J8/6eKUESpfcKkHq1ye
dwcJQATuZip3+hyCCVveiZ86TQ81RMp9en1qw+HVzfed1Ial3Tk+tqiDqZJFm25b
GMpa5g==
=OjPl
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu into staging
Fix race conditions in new user-only vma tracking.
Add tcg backend paired register allocation.
Cleanup tcg backend function call abi.
# gpg: Signature made Fri 06 Jan 2023 03:12:17 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu: (47 commits)
tests/tcg/multiarch: add vma-pthread.c
accel/tcg: Handle false negative lookup in page_check_range
accel/tcg: Use g_free_rcu for user-exec interval trees
accel/tcg: Fix tb_invalidate_phys_page_unwind
tcg: Add TCGHelperInfo argument to tcg_out_call
tcg/aarch64: Merge tcg_out_callr into tcg_out_call
tcg: Move ffi_cif pointer into TCGHelperInfo
tcg: Factor init_ffi_layouts() out of tcg_context_init()
tcg: Convert typecode_to_ffi from array to function
tcg: Reorg function calls
tcg: Use output_pref wrapper function
tcg: Vary the allocation size for TCGOp
tcg: Pass number of arguments to tcg_emit_op() / tcg_op_insert_*()
accel/tcg/plugin: Use copy_op in append_{udata,mem}_cb
accel/tcg/plugin: Avoid duplicate copy in copy_call
accel/tcg/plugin: Don't search for the function pointer index
tcg: Use TCG_CALL_ARG_EVEN for TCI special case
tcg: Replace TCG_TARGET_EXTEND_ARGS with TCG_TARGET_CALL_ARG_I32
tcg: Replace TCG_TARGET_CALL_ALIGN_ARGS with TCG_TARGET_CALL_ARG_I64
tcg: Introduce TCGCallReturnKind and TCGCallArgumentKind
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Detect all compilers at the beginning of meson.build, and store
the available languages in an array.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In Meson 0.64, the optimization built-in option now accepts the "plain" value,
which will not set any optimization flags. While QEMU does not check the
contents of the option and therefore does not suffer any ill effect
from the new value, it uses get_option to print the optimization flags
in the summary. Clean the code up to remove duplication, and check for
-Doptimization=plain at the same time.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
meson.build has been enabling ASLR _only_ for debug builds since
commit d2147e04f9 ("configure: move Windows flags detection to meson",
2022-05-07); instead it was supposed to disable it for debug builds.
However, the flag has been enabled for DLLs upstream for roughly 2
years (https://sourceware.org/bugzilla/show_bug.cgi?id=19011), and
also by some distros including Debian for 6 years even
(https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=836365).
Enable it unconditionally; we can fix the reversed logic of commit
d2147e04f9 later if there are any reports, but for now just
enable the hardening.
Also add -Wl,--high-entropy-va, which also controls ASLR.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Like CONFIG_TCG, the enabled method of execution is a host property
not a guest property. This exposes the define to compile-once files.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If a memory-backend is configured with mode
HOST_MEM_POLICY_PREFERRED then
host_memory_backend_memory_complete() calls mbind() as:
mbind(..., MPOL_PREFERRED, nodemask, ...);
Here, 'nodemask' is a bitmap of host NUMA nodes and corresponds
to the .host-nodes attribute. Therefore, there can be multiple
nodes specified. However, the documentation to MPOL_PREFERRED
says:
MPOL_PREFERRED
This mode sets the preferred node for allocation. ...
If nodemask specifies more than one node ID, the first node
in the mask will be selected as the preferred node.
Therefore, only the first node is honored and the rest is
silently ignored. Well, with recent changes to the kernel and
numactl we can do better.
The Linux kernel added in v5.15 via commit cfcaa66f8032
("mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY")
support for MPOL_PREFERRED_MANY, which accepts multiple preferred
NUMA nodes instead.
Then, numa_has_preferred_many() API was introduced to numactl
(v2.0.15~26) allowing applications to query kernel support.
Wiring this all together, we can pass MPOL_PREFERRED_MANY to the
mbind() call instead and stop ignoring multiple nodes, silently.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <a0b4adce1af5bd2344c2218eb4a04b3ff7bcfdb4.1671097918.git.mprivozn@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
qga: Add initial OpenBSD and NetBSD support
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
The GTK Clipboard implementation may cause guest hangs.
Therefore implement new configure switch: --enable-gtk-clipboard,
as a meson option disabled by default, which warns in the help
text about the experimental nature of the feature.
Regenerate the meson build options to include it.
The initialization of the clipboard is gtk.c, as well as the
compilation of gtk-clipboard.c are now conditional on this new
option to be set.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1150
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Message-Id: <20221121135538.14625-1-cfontana@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
meson.build has one test where "main" is declared unnecessarily
with argc and argv arguments, but does not use them. Because
the test needs -Werror too, HAVE_BROKEN_SIZE_MAX is defined
incorrectly.
Fix the test and, for consistency, remove argc and argv whenever
they are not needed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
