In file_write_ramblock_iov(), "offset" is "uintptr_t" and not
"ram_addr_t". While usually they are both equivalent, this is not the
case with CONFIG_XEN_BACKEND.
Use the right format. This will fix build on 32-bit.
Fixes: f427d90b98 ("migration/multifd: Support outgoing mapped-ram stream format")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Link: https://lore.kernel.org/r/20240311123439.16844-1-anthony.perard@citrix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
If we receive a file descriptor that points to a regular file, there's
nothing stopping us from doing multifd migration with mapped-ram to
that file.
Enable the fd: URI to work with multifd + mapped-ram.
Note that the fds passed into multifd are duplicated because we want
to avoid cross-thread effects when doing cleanup (i.e. close(fd)). The
original fd doesn't need to be duplicated because monitor_get_fd()
transfers ownership to the caller.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240229153017.2221-23-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
For the incoming mapped-ram migration we need to read the ramblock
headers, get the pages bitmap and send the host address of each
non-zero page to the multifd channel thread for writing.
Usage on HMP is:
(qemu) migrate_set_capability multifd on
(qemu) migrate_set_capability mapped-ram on
(qemu) migrate_incoming file:migfile
(the ram.h include needs to move because we've been previously relying
on it being included from migration.c. Now file.h will start including
multifd.h before migration.o is processed)
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-22-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
The new mapped-ram stream format uses a file transport and puts ram
pages in the migration file at their respective offsets and can be
done in parallel by using the pwritev system call which takes iovecs
and an offset.
Add support to enabling the new format along with multifd to make use
of the threading and page handling already in place.
This requires multifd to stop sending headers and leaving the stream
format to the mapped-ram code. When it comes time to write the data, we
need to call a version of qio_channel_write that can take an offset.
Usage on HMP is:
(qemu) stop
(qemu) migrate_set_capability multifd on
(qemu) migrate_set_capability mapped-ram on
(qemu) migrate_set_parameter max-bandwidth 0
(qemu) migrate_set_parameter multifd-channels 8
(qemu) migrate file:migfile
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-21-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
On the receiving side we don't need to differentiate between main
channel and threads, so whichever channel is defined first gets to be
the main one. And since there are no packets, use the atomic channel
count to index into the params array.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-19-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Allow multifd to open file-backed channels. This will be used when
enabling the mapped-ram migration stream format which expects a
seekable transport.
The QIOChannel read and write methods will use the preadv/pwritev
versions which don't update the file offset at each call so we can
reuse the fd without re-opening for every channel.
Contrary to the socket migration, the file migration doesn't need an
asynchronous channel creation process, so expose
multifd_channel_connect() and call it directly.
Note that this is just setup code and multifd cannot yet make use of
the file channels.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240229153017.2221-18-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Currently multifd does not need to have knowledge of pages on the
receiving side because all the information needed is within the
packets that come in the stream.
We're about to add support to mapped-ram migration, which cannot use
packets because it expects the ramblock section in the migration file
to contain only the guest pages data.
Add a data structure to transfer pages between the ram migration code
and the multifd receiving threads.
We don't want to reuse MultiFDPages_t for two reasons:
a) multifd threads don't really need to know about the data they're
receiving.
b) the receiving side has to be stopped to load the pages, which means
we can experiment with larger granularities than page size when
transferring data.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-16-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Convert the file: URI to accept a FileMigrationArgs to be compatible
with the new migration QAPI.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-9-farosas@suse.de>
This patch parses 'migrate' and 'migrate-incoming' QAPI's 'uri'
string containing migration connection related information
and stores them inside well defined 'MigrateAddress' struct.
Fabiano fixed for "file" transport.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-4-farosas@suse.de>
Message-ID: <20231023182053.8711-5-farosas@suse.de>
Allow an offset option to be specified as part of the file URI, in
the form "file:filename,offset=offset", where offset accepts the common
size suffixes, or the 0x prefix, but not both. Migration data is written
to and read from the file starting at offset. If unspecified, it defaults
to 0.
This is needed by libvirt to store its own data at the head of the file.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1694182931-61390-3-git-send-email-steven.sistare@oracle.com>
Extend the migration URI to support file:<filename>. This can be used for
any migration scenario that does not require a reverse path. It can be
used as an alternative to 'exec:cat > file' in minimized containers that
do not contain /bin/sh, and it is easier to use than the fd:<fdname> URI.
It can be used in HMP commands, and as a qemu command-line parameter.
For best performance, guest ram should be shared and x-ignore-shared
should be true, so guest pages are not written to the file, in which case
the guest may remain running. If ram is not so configured, then the user
is advised to stop the guest first. Otherwise, a busy guest may re-dirty
the same page, causing it to be appended to the file multiple times,
and the file may grow unboundedly. That issue is being addressed in the
"fixed-ram" patch series.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1694182931-61390-2-git-send-email-steven.sistare@oracle.com>
